Ubuntu :: Unable To Have Memtest86+ On 10.04
May 16, 2010
I install 10.04 on a Windows laptop using Wubi. It worked! However, I have no memtest86+ option on my menu. I am going to get some more memory soon so I would like to have that feature on my boot menu. Went through this article [URL] Yes, memtest86+ is installed, has the +x flag on the appropriate file, and all the pieces are present. Ran sudo update-grub and it shows it finding everything except memtext86+.
I'm at a loss at what to do now. If this was the old Grub, I suppose I could manually code in the memtest86+ line but since this is Grub 2, that wouldn't be a permanent fix.
View 1 Replies
ADVERTISEMENT
Jul 25, 2010
I've been trying to run Memtest86+ ,4.0 and 4.1, first from the boot option and then from a bootable CD but it will not run for some reason. I get to the blue screen where my system stats are displayed, but on the top right where the test should be running there's nothing showing. I'm at a loss and need to test my memory as 10.04 has some random crashing on my machine.
View 6 Replies
View Related
Jul 20, 2010
Anyone know how to run memtest86+ from the Ubuntu 10.04 install CD without having to install Ubuntu? It used to be a menu option at boot, but now you just get the option to install or try Ubuntu. I want to test the RAM on an older system before I install.
View 9 Replies
View Related
May 27, 2011
I have a box running Ubuntu 11.04 (natty). I have never run memetest before. Then, randomly, when starting up today, it ran memtest. Because memtest86+ is on a loop, it doesn't stop unless you stop it. So I tried restarting the machine - no good. It simply starts memtest again and runs the same testing loop. I cannot find any setting in the BIOS to disable memtest. how I can stop/disable memtest so I can USE my computer??
View 1 Replies
View Related
May 1, 2010
I upgraded my 9.10 Ubuntu install last night using the Update Manager, everything downloaded fine, and appeared to install correctly. When it finished I got the message advising that my machine needed to reboot for changes to take effect. I checked my mail quickly before rebooting, and then let it do its thing. It shut down fine, then booted up and went into MemTest86. No real worries, so I wandered off expecting it to take 10-20 minutes. After 4 hours, though, I was starting to worry. A message at the bottom of the screen advised something along the lines that the test had been successful, and I could press Escape to exit.
I did, and my machine rebooted, and went back into MemTest86. I just figured I was being too impatient and left the test running all night. My machine has now been running MemTest86 for 16 hours, and while the timer is still running and the tests refreshing, my keyboard is not responding.
View 5 Replies
View Related
May 7, 2011
recently performed an upgrade to Ubuntu 10.10. when I rebooted, my GRUB menu showed only the memtest86+ option, rather than the usual options for Ubuntu, Fedora, Debian, Arch, and WinXP (which I haven't booted in a very long time, so I am almost 100% sure that it is not WinXP's fault. I was able to boot using a Live CD, and when I checked grub.cfg, all of my boot entries were still there. However, when GRUB itself actually loads, only memtest86+ is in the menu. I also checked that I can still boot by editing the memtest86+ option in grub so that it matched the entry for Ubuntu in grub.cfg, and it still booted correctly. However, I am curious as to why my GRUB is now forcing me to manually enter the boot entry on each boot. Here is my grub.cfg:
Code:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
[Code]...
View 9 Replies
View Related
Mar 6, 2009
I have been having trouble with one of my computers.It is a AMD 1800+ with 512 megs of PC2100 high density ram.I am running chrunchbang linux 8.10.2.The problems I am running into is programs freeze, slow way down, or quit out right.The screen saver looks as if it running in slow motion.I had read somewhere that bad memory could cause some of these problems. So I ran memtest86 from the boot menu.After it had ran for about an hour.It did one pass and it said I had about 300 errors.That is about I could understand from all the information listed.
What would be considered bad ram.What is an acceptable number of errors. I have 384 megs of low density (3x128) sticks that I can put back in the machine. Just don't want to dig the machine and ram out if I don't need to.
View 8 Replies
View Related
Apr 7, 2010
I need to check RAM on a server located in a data center several hundred miles away. So, I can't just walk over and boot to CD to run memtest86. Is it safe to run this while booted into the OS? Does anyone know of a knoppix pxe boot image? I can network boot to something...I just don't know what to network boot to.
View 3 Replies
View Related
Mar 10, 2010
When I start ubuntu, memtest86+ work to testing memery... Nothing else show up.... just blue screen with testing. I can't log in to ubuntu I don't no how to fix that I tried to use live cd to edit grub, but no grub at all. maybe because i do something wrong from this answer: [URL]...
[code]...
View 2 Replies
View Related
Feb 6, 2010
I'm stuck in Memtest86, everytime i boot it gives me an option to go into BIOS, and then it says "Loading GRUB." After that it automaticly goes into memtest, and I've let it finish numerous times without giving me errors. I've installed Linux Mint 8 via Unetbootin, I have a nearly fresh install of windows 7 on my laptop.
View 1 Replies
View Related
May 28, 2011
Has Linux some mechanism to test memory online as a background job, flag bad memory as unusable and warn the user if memory is faulty? Much like running Memtest86+ on a little chunk of memory every nth minutte until all memory is tested and then repeat over.
Edit: I did not make it clear that I want such a service running in the kernel. A (peak) performance hit should be avoided by running the test in small steps and only when the system have some CPU cycles to spare
Edit2: I meant this as a Linux kernel service that scans the memory in the background. Not meant to be run in userspace but a routine in the kernel itself, perhaps in the memory manager to make sure memory are sane!
View 2 Replies
View Related
Jun 17, 2011
I am having memory problems on my old Compaq PC, and am trying to run memtest86+-4.20 to check it. I downloaded the source file, and tried a compile, but had the following problem:
[code]...
how to get around this issue?
View 3 Replies
View Related
Nov 18, 2010
I have had no problems with downloading/installing updates and programs, and everything worked fine. Until memtest came along. It ran by itself (I think my dad made it the first boot option in grub), and now if I try to install any packages or programs, it will either say "Grub installation failed" or that any packages I tried to install failed. If I removed memtest, would that make it possible for me to install stuff again? Or is there a way to work around it?the main error report I get is: "E: memtest86+: subprocess installed post-removal script returned error exit status 127"
View 1 Replies
View Related
May 22, 2011
I just recently installed Ubuntu 10.10 on my computer. Everything worked fine at first and then I started to fix all things I wanted to have on my laptop, programs and layout etc. And then I decided to restart the computer to make all the updates and installations work properly on my newly installed Ubuntu computer, but then it seems so that everything just crashed. When I started to computer again a blue screen saying "Memtest86 v4.10" came up. It is some sort of test of the computer's capacity I think. So I thought, ok fine, it is probably really good to do a test like that after a new installation. Like, standard procedure perhaps. It took 1 hour and then it said that no errors could be found on the computer and that I could click ESC to continue.
I did that but then when the computer restarted this blue screen showed up AGAIN and started up a new test (the same one)!!! I can't open up Ubuntu, I've tried several times. What should I do??? Is my computer broken now????
View 6 Replies
View Related
May 11, 2010
I have a Wubi installation of Ubuntu 9.10 and am trying to upgrade to 10.04. The download of everything went fine, but it has stuck on the "installing the upgrades" part, about halfway through it keeps saying "Found linux image: /boot/vmlinuz-2.6.32-22-generic". It keep repeating this constantly. The status bar says "Preparing memtest86+" with about 14 minutes remaining.
View 2 Replies
View Related
Jun 5, 2011
Upgrade from 10.10 -> 11.04 froze at "Setting up memtest86+".I haven't had any problems with 10.10, but I decided to do a Dist. Upgrade from the Update Manager, and I seem to be stuck at Installing Upgrades section of the update, specifically at this point:
Setting up busybox-static (1:1.17.1-10ubuntu1) ...
Setting up dmidecode (2.9-1.2build1) ...
Setting up ed (1.5-1) ...
[code]....
View 2 Replies
View Related
May 24, 2010
I'm totally unable to play or mount audio CDs and unable to use video DVD's on my box right now. When I insert an audio CD I get a dialog box saying:
Unable to mount disc: Location is not mountable
and if I check messages in the Log File Viewer I see the following text repeated (save for the last line) a couple of dozen times.
Code:
May 24 13:04:37 Amber kernel: [ 6680.434685] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 24 13:04:37 Amber kernel: [ 6680.434691] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
May 24 13:04:37 Amber kernel: [ 6680.434695] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[code]...
on a similar but ultimately unrelated thread someone was asked to enter a few commands so I tried them and the following was the output:
Code:
main@Amber:~$ ls /dev/scd*
/dev/scd0
main@Amber:~$ sudo mount /dev/cdrom /media/cdrom0
[code]...
An error occurred: Could not open location; you might not have permission to open the file. As far as I can tell I have the relevant CSS libraries installed I'm lost without being able to play CD's and DVD's on my system.
View 9 Replies
View Related
Aug 15, 2010
I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
View 8 Replies
View Related
Jun 12, 2010
I switch on the PC and it loads the Grub splash screen. However, it does not automatically boot the top entry after two seconds as it's supposed to and just hangs. I hit enter to boot it and it attempts to but after a few seconds gives me the error "unable to mount file system....a maintenance shell will be started"
This occurred after I was using it and then everything suddenly froze up on me and I had to crash out Now this!
View 6 Replies
View Related
Apr 22, 2010
I'm trying to install The Sims 2 (which I'm aware currently does not run properly in wine anyway), using the multi-CD version. The installation goes normally, up until it comes time to switch from disc 1 to disc 2. The installer prompts me to insert disc 2, but it seems that Ubuntu still believes that the installer doesn't want me to open the drive, because, when I try to open it, it doesn't open, and a window pops up with the following message: Unable to eject CD-RW/DVD RW Drive DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
View 3 Replies
View Related
Jul 27, 2010
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
View 12 Replies
View Related
Jun 27, 2011
The machine boots, graphics come up, login window shows up, but after login there is only the background window (and mouse). My .xsession looks like this:
[Code]....
View 3 Replies
View Related
Jun 30, 2011
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies
View Related
Jan 28, 2010
Environment: A 32-bit kernel RHEL5.3 system running on a virtual machine. The root(/) filesystem is on an LV.
Issue: Unable to resize the FS after extending the root LV since it is mounted. After extending the LV, online resizing of the FS was not supported and the root filesystem could not be unmounted while it was in use. On rebooting, I got a kernel panic error. In runlevel 1, I couldn't run chroot, couldn't find the /etc/fstab, root FS could not be mounted, fsck did not run (tried block 31 for second copy of superblock using dd count=1 bs=4k skip=31 seek=1 if=/dev/sda2 of=/dev/sda2), couldn't find any rpm on installation media to install unix-utils rpm. On running commands in runlevel 1,
I got the following output.
View 5 Replies
View Related
Jan 19, 2011
I am running the latest suse release downloaded directly from their website. I ran the installation after buring the dvd and everything seemed to be working fine. after the installation i ran updates and used it for a little bit. When i shut it down that night and went to restart it I got an error that stated the OS wasnt there. I then went through the installation and everything and it retained the information from the installation before (web history etc.) but for some reason every time I reboot or shut it down the system is not able to read the startup information from the hard drive and will not come on without me re installing it.
View 9 Replies
View Related
Jul 16, 2010
Im having a serious issue with booting ubuntu 10.04, the issue being it wont boot up at all, after working so well for so long (i suspect some recent dodgy system updates are responsible) so I decided to just reinstall ubuntu from scratch again but wanted to retrieve some important files from my root device. So I am running the live desktop and I can see my previous filesystems under places but cannot mount or open my original root device where the files I want to recover are located, I receive this error msg:"Unable to mount 77 GB Filesystem.
View 2 Replies
View Related
Dec 29, 2008
I have fresh CentOS 5.2 installed to 2 sata hdd 1.5 TB size; on every of that hdd is primary raid1 submirror of /boot made with md during install. All other space is lvm place, on lvm living root and swap partitions. And it's work. Now I want to mirror my root and swap, and add other volumes with different raid requirements (raid0 and raid1).
# lvcreate -L10G -m1 -n mir vg0 Insufficient suitable allocatable extents for logical volume : 320 more required Unable to allocate extents for mirror(s).
View 2 Replies
View Related
Dec 26, 2010
I have a lenovo x200 laptop running Fedora 14, fully up to date with the Fedora repository. Seemingly out of nowhere, some websites will no longer load. First it happened to www.facebook.com, next (after a day or so) wikipedia.org, now the Fedora forum. Other Internet access seems fine, but when I try to go to these pages I just get "unable to find host" errors. Its totally bizarre. It first happened in an airport so I thought it was just a strange network there, but now it happens at home. I can't get on these sites in firefox or elinks browsers (in a terminal) BUT I can ping both sites no problem. Also, the other computers in this house have no problem visiting these sites.
View 2 Replies
View Related
Oct 31, 2010
I'm having a bit of a crisis here. I installed 10.10 a little while ago and had no problems.Just today, I had a problem with nautilus, and then with the problem unresolved, shut down the computer. Now, I can't log in. If I try, the screen just goes black, and then it goes back to the log in screen.
View 7 Replies
View Related
Jan 12, 2011
Anybody meet this, I use ubuntu 10.10, and vnc4server. Connect to vnc, when trying to input 'cd' command, you can just input 'c', it 'show desktop' when inputing 'd', behave like shortcut 'win+d'. But use the same vnc viewer connect to Remote Desktop, this didn't happen.
View 4 Replies
View Related
