Ubuntu :: GRUB Menu Showed The Memtest86+ Option?
May 7, 2011
recently performed an upgrade to Ubuntu 10.10. when I rebooted, my GRUB menu showed only the memtest86+ option, rather than the usual options for Ubuntu, Fedora, Debian, Arch, and WinXP (which I haven't booted in a very long time, so I am almost 100% sure that it is not WinXP's fault. I was able to boot using a Live CD, and when I checked grub.cfg, all of my boot entries were still there. However, when GRUB itself actually loads, only memtest86+ is in the menu. I also checked that I can still boot by editing the memtest86+ option in grub so that it matched the entry for Ubuntu in grub.cfg, and it still booted correctly. However, I am curious as to why my GRUB is now forcing me to manually enter the boot entry on each boot. Here is my grub.cfg:
Code:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
[Code]...
View 9 Replies
ADVERTISEMENT
Apr 26, 2010
Here's exracted from ubuntu Grub2 document https://help.ubuntu.com/community/Grub2:
GRUB_HIDDEN_TIMEOUT=0 This setting determines how long a screen without the GRUB 2 menu will be displayed. While the screen is blank, the user can press any key to display the menu.The default behavior is to hide the menu if only one operating system is present. If a user with only Ubuntu wishes to display the menu, place a # symbol at the start of this line to disable the hidden menu feature.According to above information, I have tried to set below in order the show the menu:
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=false
GRUB_TIMEOUT="20"
[Code]...
View 3 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Jun 17, 2011
I am having memory problems on my old Compaq PC, and am trying to run memtest86+-4.20 to check it. I downloaded the source file, and tried a compile, but had the following problem:
[code]...
how to get around this issue?
View 3 Replies
View Related
Mar 22, 2010
I have Windows XP as well as Ubuntu in my desktop. I would like to temporarily disable XP for a month or so, so that One cannot see Windows XP appearing in the grub menu list or during the boot. Is there is any option to edit the grub menu?
View 1 Replies
View Related
Jun 10, 2010
I've had two students report a problem whereby Ubuntu does not show up as a menu option in Grub. Both systems used Wubi installations of Ubuntu 10.04 Desktop for x86 on Windows XP. In both cases, Ubuntu completed the installation process. Upon reboot, we have the options to choose between Windows XP and Ubuntu. However, once we enter into Grub, only the Windows XP option shows.
View 8 Replies
View Related
Jun 21, 2010
i have a dual boot. i loaded 9.1 on one disk and windows xp is on another. grub worked fine. i downloaded 10.4 and i must have selected the wrong option cause when i restarted it dropped me into a shell. i reloaded 9.1 and wiped out 10.4. again i must have selected the wrong option cause i get the grub menu with an option for windows but nothing happens. 9.1 comes up alright and i can select windows office files from ubuntu.
View 1 Replies
View Related
Oct 21, 2010
I installed Ubuntu onto a separate partition I have. Now however when i boot up, Grub (v1.98 ) gives m 5 options.
Ubuntu, with Linux 2.6.35-22-generic
Ubuntu, with Linux 2.6.35-22-generic (recovery)
Memory Test (memtest86+)
Memory Test (memtest86+, serial console)
Windows Recovery Environment (loader)
With no Vista option.
When I run the recovery environment however, it runs just my regular vista boot would have. Is this just a name issue? Ideally I would like to have my Vista option back.
View 8 Replies
View Related
Jan 9, 2010
if it's possible to see or retrieve from the system which menu option from the grub boot menu was selected afterall.
View 1 Replies
View Related
Jan 10, 2010
I installed Ubuntu as a dual-boot system with Windows XP very carefully. Unfortunately, though given the option to boot Windows at the grub menu, when I select it, I get an error. Booting Ubuntu on my other partition works just fine, no issues.
I also attempted to access files from the first partition in Ubuntu using gparted, but once I mounted it, all of my files were not present. I only saw manufacturer files, and many files and folders I didn't recognize.
Also, as an aside, my laptop monitor is suffering from occasional black-outs during use. Ubuntu gave me a little toolbar flag, telling me to go to a website and use the patches given to fix it, but I'm not quite so sure where to input the given patch text. Do I really need to go through the trouble of finding the source code, etc., or is it more simple?
View 9 Replies
View Related
Jun 2, 2011
I know that there is a nice little launcher that will run the script for Grub to select a menu option upon shutdown for a reboot [URL]
I however would like to use this from Windows XP and have grub select menu item 2 during a reboot. Does anyone know if there is any way to set Grub commands from within Windows?
View 2 Replies
View Related
Mar 1, 2016
After installation of windows 7 installed debian 8.3. But in grub menu no boot option showing to windows.There ar only two option 1.)to boot in debian and 2.)advanc option for debian ONLY!!
View 1 Replies
View Related
Jun 20, 2010
I would like to know if there is a solution to this problem. The multimedia hotkeys (play/pause, stop, volume up/down, volume mute, ecc) stop working when i open any menu (for example mintmenu, that i use, or any menu of firefox like bookmarks) or if i start an application, such as openarena. The major problem is for volumes keys, that stop working in these cases.
Any ideas? I tried to change keyboard model, disable hotkeys mapped in prefereces->keyboard shortcut (with this they just stop working), but nothing changed.
View 3 Replies
View Related
Feb 6, 2010
I'm stuck in Memtest86, everytime i boot it gives me an option to go into BIOS, and then it says "Loading GRUB." After that it automaticly goes into memtest, and I've let it finish numerous times without giving me errors. I've installed Linux Mint 8 via Unetbootin, I have a nearly fresh install of windows 7 on my laptop.
View 1 Replies
View Related
May 2, 2011
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
View 3 Replies
View Related
Jul 28, 2009
I am testing my crash recovery strategy for my linux system and I am having trouble with GRUB. I am basically restoring my backup (i.e. tar) unto a different hard drive, but I am having problems getting the machine to boot without me having to type the GRUB commands at the GRUB prompt that is presented when the machine boots up off the new hard drive. I have tried to restore the MBR in two ways (the 2nd one is the one that gets me to the GRUB prompt):
1. Get the MBR off the original drive and write it unto the new drive (all via dd), but that did not work at all: the machine hangs right away during boot up. It seems to hang right at the point where the BIOS tries to read the MBR.
Code:
On original drive:
# dd if=/dev/sda of=mbr+part.bin bs=512 count=1
On new drive (new drive is now in place of original drive):
# dd if=mbr+part.bin of=/dev/sda bs=1 count=446 conv=notrunc
2. By using the FEDORA rescue CD, I installed grub unto the new hard drive as follows:
Code:
# chroot /mnt/sysimage
# grub-install --root-directory=/boot hd0
reboot and remove FEDORA CD Using the 2nd option above, I get the GRUB> prompt during bootup. I can then boot into the system by issuing the commands that are in the menu.lst file, followed by the "boot" command. However, I would like for those commands to happen automatically, just like in the original configuration. It seems to me that GRUB is actually finding all its stage files because I doubt the GRUB program (the one displaying the prompt) fits entirely in the 446 bytes it has on the MBR. So, it must be loading its stage 2 (and stage 1.5??) files from my /boot partition. However, if GRUB is loading its stage files off the boot partition, why does it not load/read the menu.lst/grub.conf contained in the boot partition also?
Code:
# ls -l /boot
total 22888
-rw-r--r--. 1 root root 1274567 2009-05-27 16:39 System.map-2.6.29.4-167.fc11.i686.PAE
-rw-r--r-- 1 root root 1274538 2009-06-16 22:27 System.map-2.6.29.5-191.fc11.i686.PAE
[code]....
View 3 Replies
View Related
Feb 15, 2010
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want.
In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
Is there a document explaining all of the radical changes?
View 5 Replies
View Related
Apr 29, 2010
I want to edit the GRUB menu in ubuntu but Menu.1st is missing.When I open the /boot/grub.cfg from terminal I cant save it.
View 7 Replies
View Related
Apr 22, 2011
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want. In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
View 1 Replies
View Related
Nov 1, 2010
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
View 24 Replies
View Related
Dec 22, 2010
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
View 9 Replies
View Related
Apr 22, 2010
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
View 3 Replies
View Related
Mar 19, 2010
I am trying to make a bash menu that loops with options but it does not work as I want:
Code:
I want to make it read an option and do the action then return to menu.
View 2 Replies
View Related
Aug 19, 2010
When I start the computer the boot menu doesn't prompt, when I try to load it manually it doesn't prompt neither, it just reset the command line.The grub.cfg was generated by update-grub.It's really annoying to load the kernel manually each time the computer starts.
View 3 Replies
View Related
Apr 19, 2011
I updated my grub yesterday using the command:
Quote:
sudo grub-update
and I rebooted and grub menu not coming now. I have a dual boot with Win7. Ubuntu 10.04 is installed with WUBI. I can run WIN7 but can't run Ubuntu now.
View 7 Replies
View Related
Mar 9, 2011
I increasingly use Ubuntu so swapped SATA ports 1&2 around so now 7 boots from BIOS F11 pop out menu. Windows did not complain so far but hibernate is missing from Ubuntu's power down options. I installed Ubuntu Tweak, but cannot see an option to re-enable. Is this something to do with the swapped HDDs &/or the swap partition? Or more likely a recent update?
View 3 Replies
View Related
Jun 5, 2009
I've got myself the curious situation where, when I boot the system, I can get grub to start, but it always drops to the prompt.
I can run:configfile /grub/menu.lst
and this brings up the menu with no problems, and from there I can boot the system to either linux or windows. What I don't understand is why it wont go to the menu in the first place?As far as I can tell, grub/Kubuntu got confused when installing, as each of the hd#,# settings in the menu.lst have needed tweaking to let the system boot. (e.g. windows is actually hd0, but the original install had it at hd2. Likewise linux is on hd1, but the menu.lst had it at hd0). I've happily tweaked these to make the system boot, but would appreciate any help in convincing grub to actually load the menu without me having to use the prompt.
View 7 Replies
View Related
Apr 17, 2010
I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
View 6 Replies
View Related
Apr 27, 2010
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
View 9 Replies
View Related
Dec 1, 2010
Code:
grub-install -v
grub-install (GNU GRUB 0.97)
I loaded GRUB, and now when I reboot it goes straight into the 'grub>' command line. Initially GRUB had the root as (hd0,2), whereas the boot is on (hd0,1)...(hd0,2) is my '/home' partition, and (hd0,1) is my '/' partition... So on a bootup I ran...
Code:
root (hd0,1)
setup (hd0)
Now when I boot I still get the 'grub>' command line, but now the root is correct.
From 'grub>' I can type...
Code:
grub> configfile /boot/grub/menu.lst
GRUB will then show the menu, and I can click the listings to load them. All's fine, but why doesn't GRUB just load the menu.lst without my prompting? How can I automate this process of typing 'configfile /boot/grub/menu.lst' each time I boot?
View 1 Replies
View Related
