Now i have two different OS in different partitions and i want to doble boot with grub.
When i start my pc i get the GRUB TERMINAL: grub>
How to boot?
I've resized partitions with some program - perhaps even gparted - but from Win7. partitions are indeed resized, but now I can't boot Win7, grub says:
"No such device found - No such partition found".
I tried to use some advices on similar problems I found here (like adding GRUB_PRELOAD_MODULES="part_msdos" to etc/default/grub and running grub-mkconfig after), but nothing helped. I guess I could restore win7 with installation dvd but I want to fix GRUB (and have both ubuntu 10.10 and win7)
Code:
john@john:~$ sudo fdisk -l
[sudo] password for john:
Disk /dev/sda: 82.0 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xd576590b
Device Boot Start End Blocks Id System
/dev/sda1 1 789 6336513 f W95 Ext'd (LBA)
Partition 1 does not end on cylinder boundary.
/dev/sda2 * 1476 4008 20346322+ 7 HPFS/NTFS
/dev/sda3 4009 9964 47841570 7 HPFS/NTFS
/dev/sda5 1 749 6008832 83 Linux
/dev/sda6 749 789 326656 82 Linux swap / Solaris
Computer StatisticsiMac (Model No. A1225) Dual Boots Mac OS X Partition Layout/dev/sda1 = EFI /dev/sda2 = Macintosh HD (HFS Format with Journaling) Free Space (32 GB) I had the linux installation program automatically partition the free space into three partitions. I forget what they were, but I know they are correct.
I tried doing a rescue installation, and reinstalled it many times with different settings. I even tried a manual partition according to instructions from the internet and reinstalling the grub boot-loader onto different partitions. I have reinstalled it at least 5 times!
i'm trying to install 98se to a 110gb partition so i can dual boot with ubuntu 10 for 98 and 100 for ubuntu after the resize. when i tried making multiple partitions manually for ubutnu putting it on separate partitions i got grub boot errors. the problem i am having every time i try to install 98 it forces me to scandisk it then i have to hit space bar to fix every error i thinks it finds wich is impossible to press it 2 million times. now if I format in a non 98 format and tell it to format in lba it keeps asking for a boot disc, i burned one off but, still kept asking for it. if i do it in non lba, it only saw 2 gigs in 98 and when i went to install ubuntu it was a giant hard drive no partitions. i did try making 3 fat 32s 1 for 98 and then swap and linux partition but, the i got grub errors 17 and 18.
the problem is that bios a cap of 130gb for each drive or in this case partition. it's 320gb WD blue Scorpio. the short i want to dual boot 98se and ubuntu 9.04 with 2 fat32 partitions for storage 110 +100 + 80 = 320 also some visuals.
I have been an MCSA for the last 20 years, but recently I have been very impressed indeed with Ubuntu 11.04, having dabbled with and then discarded Susi Linux some five years ago. My problem may be summarised as outlined below: Using the downloadable ISO I installed Ubuntu 11.04 as a dual boot on a Win7 100GB HDD on my Lenovo T61 laptop. No problem they both rock and I'm very impressed. During the installation procedure I selected the largest partition sizes available from the Ubuntu installer wizard being 25GB Extended split into 18GB Ext4, and 3.2GB and 3.2 GB swaps (I couldn't suss out any way of manually increasing them any further).
I found that the 11.04 Startup Manager application didn't work at all, so I downloaded and installed Grub Customizer 2.1..and that did work after a fashion.. certainly enough to actually effect changes in the grub configuration settings. Everything worked so well on the 100GB HDD that I decided to transpose the entire disk image to a new 500GB WD Scorpio and make the dual boot my main working disk. Using Acronis I imaged off the 100GB installation selecting the partition by partition, and retain disk signature options. I then recovered the image to the new 500GB HDD and everything works beautifully on the new HDD.
Except of course all the partitions are still the same size. I won't waste your reading time recounting everything that I have done using Acronis Disk Director (V Good) and Gparted (not so good), but needless to say whatever I do Grub won't have it, and I have lost count of the times that I have re-recovered the good image. Basically I want to increase the partion sizes to apportion larger partitions to both Win 7 and 11.04 and obviously I'm missing something somewhere.
Fdisk -l -u produces..
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x9f011ed1 .....
i want to boot windows from grub loader and delete linux .Is this possible?or can i keep only /boot partition so that windows boot from grub prompt i want to boot windows from grub loader and dont want any linux partitions on my machine.Is this possible?or can i keep only /boot partition so that windows boot from grub prompt and delete rest of the linux so that i can get all free space.it is not possible for my system to get windows boot loader hence i want only grub boot loader to load only windows.
View 1 Replies View RelatedUpdated to 10.04 OK except for a couple of things. No sound icon on the task bar and it's not in the 'add to taskbar list'. Not a major problem, just put it in the 'start programs section'.Annoying thing is after selecting from the grub boot menu, the machine seems to be suffering some indesision as the cursor sits on the top lhs of the screen flashing and the screen modulates between various degrees of darkness. Then the machine boots OK. Certainly slower than karmic - not quicker as reported. Seems to be some conflict happening. There is a duplication of the kernal entries for default and safe. Mabe this is the problem. I have run update-grub2, but it keeps giving me double entries.
View 5 Replies View RelatedI have Ububtu installed (9.10) which uses Grub2. How can I double boot Fedora 12 with Ubuntu 9.10?
View 12 Replies View RelatedI need a Linux O.S. to double-boot with Win7 (already installed). It should be user-friendly, have a tv player (Myth TV?) already installed and as-far-as-possable already configured for my tv stick..Avermedia. Emphasis should be on multimedia..with good video decode/encode possabilities. I`m considering either Mythbuntu or Linux Mint.
View 3 Replies View RelatedMy laptop's been locking up in Linux (Ubuntu, Backtrack, Puppy) periodically for a while now. When it locked up, it was always immune to the magic of SysRq, which I thought might indicate a hardware problem. It became so bad that I had to stop using the laptop.
Today, when I turned it on and tried to boot into Fedora 12, I got the following error (just once, it just locked up at various points during the splash screen after this once):
double fault: 0000 [#1] SMP
last sysfs file:
CPU 0
odules linked in:
Pid: 1, co m: swapper Not ta nted 2.6.32.11-99.fc 2.x86_64 #VGN-T 250N
RIP: 0010:[<ff
All the seemingly missing letters were really missing, not my typos.
As you can see, kernel version is 2.6.32.11-99.fc12.x86_64 and my laptop is a Sony Vaio TZ 250N (Core 2 Duo ULV 1.2GHZ). Note that with the other remaining kernels from the updates, nothing ever happened other than the locking up. The core temperatures hover pretty high, about 55-60C peak but this is still below the critical temp. Memtest came up clean when the problem first started happening.
I have two hard drives in my laptop, they are NOT raid configured. I installed 32-bit Ubuntu on the second HD, third partition: Sdb3. I then installed 64-bit Windows 7 on the same hard drive, first partition: Sdb1 (Sdb2 is formatted NTFSd willusedasstorage).Windows installed fine.Then I installed Windows in 32-bit on the first hard drive, first partion: Sda1. Sda2 will again be used as storage.When I boot up, Windows boot manager gives me the option of the two windows OS's to install (but not Ubuntu of course).I wanted to boot into the Live CD, where I would reinstall grub, assuming it would recognize my two Windows, and I could boot into any of the three OS's upon start-up.The Ubuntu Live CD, will act as though it is going to boot, bringing me up to the loading screen, then it cuts out to "busy box" and I am not sure what to do. Buys box is almost like a command prompt, but I don't understand the commands.
View 1 Replies View RelatedI recently decided to build up a Linux computer with the following configuration:
- Motherboard : MSI KT4 Ultra
- CPU : Athlon XP 2000+
- RAM : Kingston ValueRAM (2 DIMMs, I put them in all possible arrangements)
I doubt other compoment details are relevant, but if you do think so, feel free to ask.
I installed Debian 5.05 on that machine ; it worked all fine.
However, given that my mobo would not support wake on lan (and that I needed it given that my goal was to build some sort of server), I searched for a new one that did, I then installed an ASRock K7S41GX.
Since doing so, I have not been able to boot Linux ; after doing some fixing on my part, I have come to the point where I have the very same error repeating times and times again every time I try to boot ; here's the error message I get and how I get to it.
GRUB loads like a charm, then Linux starts booting and stuff happens :
Checks filestystem, initrd and stuff (I actually don't understand that part, but it seems to work OK).
Where "########" stands for a series of eight hexa chars (I assme these might be memory adresses ?).
A few more details :
- The ########'s are NOT the same on each attempt to boot.
- When I try to reinstall Linux, I also got various error messages (Mosty "PANIC: attempted to kill init" or "PANIC: attempted to kill the idle task")
- Rescue mode fails the same way re-install does.
- For some reason I just can't explain I ONCE happened to manage to start the installer process, which unfortunately ended up hanging on "Detecting Network hardware". (I attempted to disable the onboard network device to no avail).
i am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies View Relatedwe have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies View RelatedI installed ubuntu on my internal hard disk I experienced a problem with Grub and I just formatted all the Ubuntu Partitions and convert their format to NTFS to restore my windows (I have a backup) but now despite of I format all the Ubuntu's partitions but in the boot time, the grub exist and the grub apear I want to know where does grub exist? I installed ubuntu on the dual booter situation and it was ubuntu 9.10
View 1 Replies View RelatedI've using win7 and 9.10 for a few months now. Today I decided to install yet another OS, but during installation a new grub was written to the mbr. Result: I can no longer boot Ubuntu.This is what my menu.lst looks like
Quote:
timeout 10
color black/cyan yellow/cyan
gfxmenu (hd0,4)/boot/gfxmenu
default 0
[code]....
I can see and mount my 9.10 partition just fine from the new OS, it's located on dev/sda6.And I'd still very much like to keep using Ubuntu. So, how do I go about editing this file to make it work?
How can I install grub after changing partitions with a partition live cd (gparted), since the old grub is no longer working. Usual reinstall won't work here, it'll just reinstall with all the wrong pointers to partitions.
View 2 Replies View RelatedI have a 320GB Hard Drive, divided into 4 partitions.
20GB Windows 7 Home Premium x64(NTFS)
20GB Mac OSX Leopard
20GB Ubuntu 9.10 x64 Root (Ext4)
[code]....
I have two "Ubuntu" installations, for the record. My HDD is laid out like so:
PRIMARY - First Ubuntu
PRIMARY - Second Ubuntu [XBMC Live]
4GB Free
14GB LOGICAL
-4GB Free
-10GB Swap
Now, GRUB is currently on XBMC Live. I have terminal and root access if needed, and a "Live CD" ready to use. What I want to know is how I can move GRUB, preferably on its own partition but it can go back the the first partition.
I've been running ubuntu 9.10 until this week without any problems. I've just done an in-place update to 10.04 and now cannot boot my windows XP partition.
looking at grub.cfg it appears to be referring to sdb1 as the XP partition whereas the disk utility says the correct partition is sdb5.
sdb1 is a data partition formatted ntfs but not bootable.
When I choose XP from the grub menu all I get is a black screen with a flashing cursor at the top, which would suggest it is trying to boot the data partition.
I've tried update-grub and also startupmanager and it makes no difference. I would just try to edit grub.cfg but the next update would presumably wipe out my changes.
I am building a 10.04.1LTS server. I am putting the /root filesystem into a Software RAID1 partition. I want to keeo my /boot partition outside of RAID.Is there a way to have a boot partition on both sda and sdb so if one drive fails the second boot partition will work away - or should this be kept in with RAID also.
View 6 Replies View RelatedI was yesterday evening experimenting inserting a script into /boot/grub/grub.cfg. Well I broke grub.cfg and had to try to boot from a grub2 prompt.I have separate /boot and / partitions on /dev/sda1 and /dev/sda2 respectively.Working out the correct syntax for the boot to work was a little complicated, so I thought it would be useful to post the correct procedure here, in case anyone else has the same set up that I do (separate /boot and / partitions)At the grub prompt code:
grub> set prefix=(hd0,1)/grub
grub> insmod linux
grub> set root=(hd0,2)
[code].....
I want to resize and eventually remove some partitions on my drive but I need to know how this will affect grub and what to do if I need to fix it.I currently have 3 standard partitions and 1 extended partition on a 160Gb drive.
1st Partition -Windows XP about 60Gb with about 35Gb used. NTFS
2nd Partition -Ubuntu Lucid 10.04 amd64 about 40Gb, 22Gb used ext4
3rd Partition -Linux swap about 2.5Gb
Extented Partition -Ubuntu 9.10 about 49Gb with 23Gb used ext4
I'd like to shrink the Extended partition down and add the space to the 2nd partion where Lucid is. Eventually, I'll want to delete the whole extended partition and add all the space to the Lucid partition.
After using GParted to resize these partitions, what will happen when I boot? Will I need to tell grub where the swap and 9.10 are? I am not changing the start of the first two partitions so I would assume there will not be any problem with them (I'm not sure how moving the start of the swap might affect the Lucid installation though).
my old 80gb pata HD showed a dual boot Ubuntu - XP on startup, although ubuntu never worked, onlly XP booted. Recently I tried to Restore a Macrium backup on one of its two partitions, & spoiled something. On boot up it says:-
GRUB loading stage 1.5GRUB loading please waite Error 22
I tried to reinstall Ubuntu 10.8 with no success, & also XP with "R" for repair again with no success.
I had tried many distros over the years but settled on Ubuntu for the last two or three, unfortunately the new version of Ubuntu (Natty) has prompted me to make the change again. To keep access to all my Ubuntu docs e.t.c. I installed Fedora 14 on a seperate partition and hey presto, there's the Ubuntu partition for me to read from, problem is that my laptop still just boots straight into Fedora, this is ok on my laptop but I wanted to make the switch on my desktop as well which has the wife's Windows partition on it, not being able to boot into that would cause eruptions! The problem is that Fedora hasn't installed a Grub menu.
On advice I typed this:-
[eric@Eric-Fedora ~]$ grub-install -v
and got:-
grub-install (GNU GRUB 0.97)
[eric@Eric-Fedora ~]$
I have 2 fat32 partitions that I use for things that I share between windows and fedora
I decided to merge them into one partition so I did this with cfdisk by deleting them creating and creating 1 large fat32 partition with the free space. When I boot my machine I am presented with:
grub>
I used the fedora cd to "rescue a broken system" and everything seems fine? I didn't touch any partition besides my extra fat32 partitions and my /boot partition is bootable. How do I tell this minimalistic grub to use my normal grub.conf?
I am preparing for RHCE. While doing the lab I renamed /etc/grub/grub.conf as grub1.conf. Now (obviously) system boots on grub> prompt. Can I recover without using a bootable CD? Another problem that I encountered was, while doing lab for fdisk, I used command umount -al. Now, fdisk -l is not listing the partitions but giving a message:- /proc/partitions does not exist. If I reboot the system this is restored.
View 1 Replies View RelatedI'm running Debian Squeeze AMD64 with full disk encryption and LVM. After reinstalling Windows 7 I lost GRUB from the MBR. I managed to install GRUB after following this guide and using an Ubuntu 10.04 graphical installation disc, but I only get to a GRUB CLI when booting, so I can't actually choose an OS there.
I tried following this guide but I'm stuck after "# Mount the partitions to /mnt/root" and don't know what to do.
Does anyone know how I can fix GRUB so I get to choose between Debian and Windows 7 there?
In bash I need to use some equivalent of double quotes inside double quotes (or the other way around.)I need to run the following statement to get the output of foo and store it in a variable while passing foo the $file which probably contains spaces.
Code:
variable=$(foo "$file")
The problem is that foo might return an empty string and if it does I need to catch it
[code]...
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....