i installed ubuntu 9.10 but it doesnt work i have a laptop MEDION akoya P6622 which its whit a geforce 310m 3d card and a intel graphics media accelerator 3d card can someone help me i just get a black screen when i wanted to start up ubuntu windows 7 just work normal grtzzz mikeyy
View 2 RepliesI have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
I can start libreoffice as root user, but can't start as normal user. Shows error, exception "user" like something, now even that also stopped coming.
View 4 Replies View RelatedI'm having some trouble with Tomcat 6 after upgrading to 10.10. During the upgrade process, the installer hung while dealing with Tomcat 6, which required me to kill the upgrade and do some clean up, and then re-run `apt-get upgrade` again to get things going. This left some weirdness (like the MOTD for both 10.10 and 10.04 being shown on login), but otherwise things are OK. The only remaining problem I have is Tomcat; it simply won't start when the server is booted. The information I have:
Tomcat 6 runs normally when started with `sudo /etc/init.d/tomcat6 start`. No errors are thrown, everything works as expected.I used `rcconf` to try removing and reinstalling the rc scripts, this didn't help. I manually deleted all the rc scripts, then used `rcconf` again. The scripts all seem symlinked correctly to `/etc/init.d/tomcat6`, but it's just not coming up on boot. I ran `sudo grep "tomcat" /var/log/*.log` to see if something is appearing in the logs, but nothing of interest is there.
How can I verify that Ubuntu is even trying to start Tomcat? As this is a development box, I am not adverse to a quick + dirty solution if there's some either simple way of getting it started at boot. I'm thinking the next Ubuntu release will see me blow away the server and start it fresh, but right now I'd just like a working box
I get a blank screen with no progress when I use normal mode, but I am able to get into desktop environment using recovery mode and selecting safe graphics mode from there. Anything I could to do to restore my normal desktop environment.
View 9 Replies View RelatedI am running ubuntu on several computers. One in particular runs mythbuntu and is a mythtv server and frontend.
I do the ubuntu upgrade every 6 months so that I can gain the new features and enhancements included in mythtv.
My issue is that with each upgrade seems to come more issues. For instance, this time I upgraded to the latest and greatest and now mythtv crashes every day or two. Also, since vdpau was added to the new nvidia drivers, i am unable to get it to work.
So my question is: Is it normal for you guys to do a complete reinstall when you want to go to a new version of your linux flavor of choice.
It seems that the new ubuntu (really mythbuntu) is very stable and never crashes, but it just seems to me that once you start running a few programs, they just don't upgrade well.
I am running 11.4 with KDE updated to 4.6.3 and suddenly I cant start Yast or Software Manager using kickoff. It doesn't even open the dialogue to ask for root password. I see Yast appear in the panel for 15 seconds or so then it just disappears without opening a window. If I open a terminal and su to root and run yast2 it work fine.
View 9 Replies View RelatedI have found so many ways for root user to execute commands in so many possible path locations - but having difficulties on executing commands as normal user - during start up.This is what i've got for /etc/rc.d/rc.local script:Code:su -l user && (/bin/sh svc_cmd.sh &)But the command doesn't run at all...
View 2 Replies View RelatedIf I install a regular version of Ubuntu onto a USB drive using my desktop,can i plug the usb into my laptop and it will work normal,no issues having used the laptop desktop to install to the usb. Only reason asking because i can disable the harddrive on my laptop so i just unplug the harddrive in my desktop and install ubuntu like that onto usb,if theres a better method for laptop love to hear it
View 3 Replies View RelatedSo I have forgotten my password, like a moron, and have been trying to reset/recover it.
I have found the plethora of sites giving instructions on how to reset my password, such as psychocats.net
So have gotten into the root shell and this is what I type.
ls /home
(gives me the name of my account)
passwd (my account here)
unknown user (account name here)
I have also tried doing the editing the boot kernel.
I add this: rw init=/bin/bash
Once I restart I get the root@(none) command prompt. Then I type passwd (username here) and get back ' unknown user
Does this happen to anyone? Is there fix for it? The problem doesn't appear immediately but seems to develop some time after launching docky.Some relevant specs:
- Ubuntu 9.10
- GeForce GTX 285 with 195.36.15 drivers
- Compiz enabled
I've attached a picture of it hiding behind Firefox.
If sound on F12 works as root user but not as a normal user, try this simple fix! I've been struggling to get sound working as a normal (non-root) user since F10. Until now I've had to run X as root user to get any sound out of my machine.
Sound actually works OK now for me as a normal user. Here's how I fixed the problem.
First I uninstalled pulseaudio with:# yum remove pulseaudio Then reboot back to the hardware. You might want to keep pulseaudio, but I have no need for it. PA wasn't running on my system anyway.
Running X as root user, I did the following: As a test I opened a root shell and typed the following:
[root]# alsamixer c0 That started the alsamixer OK, and all the controls were accessible.
[Code]...
I recently installed FC13 on my Acer 2920 laptop. During normal routine work, the system shutdown unexpectedly without giving any message. This problem continues every time I boot fecdora.
View 2 Replies View RelatedI was looking at some Vim plugins, and I installed one called Abolish. The page from where I got it [URL] only says:
install details
Extract in ~/.vim or ~vimfiles
So I extracted it in ~/.vim. Now, the issue is that, if I edit a file as root, I am able to use the commands; however, when I edit a file as a normal user, these commands won't work. So... could this be a permissions issue? Or should I copy the plugin in some other directory, maybe?
when i start the computer i will have 3 seconds to choose windows xp or else it will go on linux but someone told me that by changing the grub.cfg when i start my computer i will have 3 seconds to start linux or else it will be xp is this true ? and if it is can someone explain me how to do it because i would like that
View 3 Replies View RelatedIve been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
[Code]...
I have a single harddisk partitioned with Ubuntu Maverick and Windows 7 installations. I installed Windows first and then Ubuntu, after resizing partitions and adding a new one for Ubuntu. Win7 did not appear in the Grub2 boot menu. I added it (sda3), but on rebooting, I get the message "BOOTMGR is missing/Press Ctrl+Alt_Del to restart".
I understand that Win7 might have put its boot manager in another partition, and sda1 had FAT. I added sda1 as another grub2 entry, but when I try that, I get the error message "Windows Boot Manager/ Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225/ Info: The boot selection failed because a required device is inaccessible." Attached are fdisk and parted outputs; and the grub2 files I created. How do I get Windows 7 to boot up?
can windows7 programs properly work on ext3 filesystem in windows (if i use ext2ifs)?
View 2 Replies View RelatedI installed the 10.04 64 bit beta after 9.10 went down on me AGAIN, and when I booted up and got to the login screen I got the ubuntu chimes then the screen went black, the three lights on my keyboard, numlock etc, started flashing every second, and the chimes continued every second. Machine was completely unresponsive, cntrl+alt+del or cntrl+alt+backspace did nothing. Any ideas or how do I report this officially like?
View 2 Replies View RelatedI was running Ubuntu 9.10 with 3 - 1.5TB drives in a software Raid 5 array. The OS is installed to a separate drive. I decided to format the OS drive and install Ubuntu 10.10, but having done that I can no longer get my Raid array to start. When I am in the Disk Utility and hit the "Start RAID Array" button I get a message saying that there are not enough components to start the Raid array, even though the 3 raid drives show up within the Disk Utility.
View 1 Replies View RelatedI have the Ubuntu Netbook CD. I tried installing Ubuntu by launching Wubi.exe. But nothing seems to be happening. I opened task manager and checked whether the process wubi.exe is starting. It is indeed starting up, but goes off in a few seconds.
I downloaded the wubi.exe again and tried, but without any success.
Any clues?
I run an 11.04 Server with Bind9, DHCP, Apache 2 PHP5, PostgreSQL8.4 and would like to install an FreeradiusServer. After I downloaded the packages with code...
View 1 Replies View RelatedI've just upgraded to Lucid Lynx on my Asus Eee Netbook, with Notebook Remix installed. I wqs glad to see that Canonical integrated the gwibber client into the desktop environment, as this gives me better opportunities to use my Twitter account properly. Unfortunately, i can't run "Set up broadcast account" when clicking the "letter-applet" icon. When running gwibber from terminal, I get this code...
View 9 Replies View RelatedI have used LVPM to resize my ubuntu root.disk from 25 GB to 30 GB. But this was a big mistake because I had 61 GB in my /host drive and I seemed to used it up all. I have not lost data because my work was in another partition but Windows won't start up. I copy-paste the files ystem space usage (from ubuntu):
luisridaocruz@ubuntu:~$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/loop0 25G 22G 1.2G 95% /
udev 1001M 332K 1000M 1% /dev
none 1001M 252K 1001M 1% /dev/shm
none 1001M 92K 1001M 1% /var/run
[Code].....
How can I free up some of the memory in /host so that Windows will work?
I'm running Fedora 12 constantine, and firefox was working just days ago, but today i tried and it wouldn't launch.
I go to terminal and type "firefox -safe-mode" (because i was using ubuntu this command worked when this exact problem occurred) but here i get "Could not find compatible GRE between version 1.9.1.4 and 1.9.1.4"
also i would like to ask, how do i update my fedora from terminal, something similar to "sudo apt-get update" on ubuntu..but yum instead,.
I just installed fedora on an old laptop. After restarting, the computer just shows me a black screen, it doesn't even show the BIOS screen. If I put a CD with the fedora installation program, it sounds like its reading it, but the screen keeps being black.
Just as background, i thought this laptop had died 4 months ago when I tried to start it and then nothing happened (black screen). Today, I decided to check if it was working before throwing it to the garbage, with the fedora 13 live cd in it, and voila, in entered and I was able to install fedora. But then upon installation of fedora it just shows again the same black screen...can this be a hardware problem?
I installed qmailtoaster and after reboot xwindow didn't start
View 1 Replies View RelatedI am running Ubuntu 10.10(I know what you're thinking, but I have a thing for Betas) and everything was going well until I installed an update calles Grub-PC, which I don't know exactly what it does but it said it was important. Now ubuntu won't start unless I first restart from Windows. If I try to turn on the pc and start ubuntu it restarts itself. I can only read something about NTFS, it only shows the text for less than a second than it restarts.
View 1 Replies View RelatedI've tried installing Ubuntu 10.10 several times on my computer and i keep getting an invalid argument and I've tried running it off the cd but The computer boots straight into Windows and i've tried to boot from the cd but the computer bypasses it and boots straight to Windowsthis is the log error i received.
Code:
11-24 16:51 INFO root: === wubi 10.10 rev197 ===
11-24 16:51 DEBUG root: Logfile is c:usersjavierappdatalocal empwubi-10.10-rev197.log
[code]....
I want to have it with vnc remote, because I want to have it in a place away from monitor and if it shuts down I have to connect it with a monitor and keyboard enter the user password and open vnc. So I want to do as windows start vnc on startup, and I don't know if it's possible enter the user password from remote.
View 4 Replies View Related