Ubuntu :: Set Up Middle Clicker To Use For Scroll Function In Firefox?
May 31, 2011i wasn't sure how to explain it right. So basically i want the middle scroll wheel to navigate up and down the page(I'm new).
View 3 Repliesi wasn't sure how to explain it right. So basically i want the middle scroll wheel to navigate up and down the page(I'm new).
View 3 RepliesIn Google Chrome Beta and in Epiphany, I am able to scroll through the different tabs with the middle mouse button. However, this doesn't happen in Firefox. Is there any way to implement a feature like this in Firefox?
View 4 Replies View RelatedI would like to say that I have tried searching for a possible solution on this, and I may be wrong, but I haven't found anything on it. Anyhow, I am here because I would like to know if there is a way to enable the "scroll wheel" in Firefox, like in Windows, on Ubuntu 10.04.
View 3 Replies View RelatedI want to be able to auto scroll by clicking my middle mouse button. In Firefox you can do this in the about:config easily, but with Google Chrome, I don't know what to do.
There is no Chrome option to allow this, so I guess I'd have to configure some stuff. Does anyone know how to do this? I really prefer Chrome over Firefox, and would like to go back to it, but can't without auto scroll.
I don't know what it is called really, but in windows it has a 'fast scroller' when you click down the middle scroll button down and move the mouse down. Is there a way to do this on Ubuntu?
View 2 Replies View RelatedI recently purchased a Wacom Bamboo Pen Only (CTL-460). It's a great device and in Fedora 15 (x86_64) it worked out-of-the-box like a charm!
I don't miss the rubber or the extra keys on the tablet. But I'm having quite some trouble, using the pen as a mouse replacement in all day use. The following is with respect to usage outside GIMP and Inkscape (i.e. Firefox, Nautilus etc). What I would really like to have, is:
+ scrolling by pressing the "first button" and simply _moving_ the pen. Just like with my Thinkpad-Trackpoint: Here I press the middle key and can then scroll just by controlling the Trackpoint. Would already be cool, if I could scroll by pressing the "first button" and touching the tablet. A short tap while pressing the "first button" should still be a "middle click"!
Code:
Found a solution for "jamming at the edge of the screen". Just resized the "area" a bit (smaller) with xsetwacom...
Is there anyway to change the scroll speed for the mouse in Firefox? Right now it leaps down a long way for each click of the scroll wheel, practically leaving me cross eyed and having to search for my position where I was reading. I can't seem to find a way to adjust this anywhere.
View 2 Replies View Relatedi have at least one site that don't look well in firefox in this site all the site is glued to the left side of the screen not the middle as it should be what can i do about it?
View 7 Replies View RelatedI was just wondering about something. I have linked the middle click to initiate the cube rotation and it works perfectly except when I have the cursor on firefox. Then it just acts like I middleclicked in firefox itself. Personally I like this behaviour but was wondering why it is JUST firefox that has it. Would be great if I could achieve the same in Blender
View 4 Replies View RelatedI've been working on tightening up my firefox display. I've managed to cut down the vertical scrollbar. Anyone know how to do the same with the horizontal scroll bar. See screenshot? I'm running this on an eeepc 701 (hence the small screen size).
From my userchrome.css
/* hide vertical scrollbar */
notificationbox {
overflow-x: hidden;
} browser[type="content-primary"], browser[type="content-targetable"] {
overflow-y: scroll;
margin-right: -12px; /* 12px == width of my scrollbar */ }
After installing a bunch of new updates with the update manager a few problems have popped up regarding the scrolling in firefox with the arrow keys. The first problem is that when I open up a new web page it does not automatically allow me to scroll. I have to first click the web page and then are the arrow keys enabled. The second problem that I have is that when I press the down arrow key to scroll down in the beginning it jumps down to the end of the page. The third and final problem is how it scrolls. For some reason a site in firefox acts like a word document. Instead of be the arrow keys controlling the scroll bar it controlls the little I symbol you see when typing.
It is amazing how annoying it can be when you can't scroll with the arrow keys. If nobody knows how to then I will probably just reinstall firefox. I have also just figured out that page up and down also do not work.
Usually but not always, when I try to scroll down by clicking in the vertical scroll bar - instead of going down approx 1 screen firefox slowly and jerkily and out of control goes all the way to the bottom of the page. If it is a long page I wait a long time.
The wheel on the mouse works fine, moving the vertical scroll handle with the mouse works fine, pushing the down arrow also works fine.
Alternatively - sometimes the vertical scroll works as I expect it to.
Alterntively - when I use Opera it scrolls as I would expect.
When zooming in on some websites there is no horizontal scroll bar and therefore you can't scroll over to see the rest of the webpage? Fedora 15, Gnome Shell and Firefox 4 & 5 & Nightly builds version 64bit. On this site for example [URL]. 30 views and no one has clicked the link and tested it in firefox?
View 2 Replies View RelatedIt's a lot more laggy and jerky in GNOME/X, even with GL-render on. Is this normal with nVidia cards or should I try tweaking some settings?
View 5 Replies View RelatedHi, very new to opensuse. I have 64bit 11.3 and its been working very well. My problem is that in Firefox: I have Firefox 3.6.12 when i scroll down using the mouse scroll wheel (not up?) most of the time, but not all the time i get horizontal lines instead of the "real picture". This also happens when i use my keyboard's down arrow key.
When i go slower it seems to happen less often. Also if i click off the page and back on again the display is fine. Is this problem my graphics card? Firefox? or my mouse/keyboard?
I really enjoyed using Apple's wireless Mighty Mouse and Magic mouse because of their ability to easily touch scroll 360 degrees. Unfortunately, Linux drivers are not provided for these mice.Is there an equivalent wireless mouse that works well in Linux? Ideally with native support or community provided drivers, etc.
View 2 Replies View RelatedThe new scroll tab that 11.04 has appears when you hover over the orange area on the scroll bar. The scrolling arrows are gone.Well this scrolling tab often vanishes before I can click on it to scroll down. Is there a way to revert to the old style, like the scrolling mechanism on these forums? It is nice to have the option of the arrows on top and bottom, along with the scroll tab thing.
View 3 Replies View Relatedthe problem i am experiencing on my laptop (hp pavillion zv5000) which runs ubuntustudio 9.10 (this problem also occurred with ubuntu 9.10, before i upgraded to ubuntu studio) is that whenever i view a video on firefox, be it videos, metacafe, and generally any site where you can see online videos, the video glitches a lot, and after a few seconds firefox grays out, and is not responsive, which means i either have to kill firefox.i am running firefox 3.5.7 with the ubuntu firefox modifications 0.8 pack added. in the preferences, on the content tab the enable java button is not ticked. the following is the list of plugins i have on firefox:
View 5 Replies View RelatedI am running Ubuntu, and I was wondering if there are any settings that I can change in order to remove to make it so that users of the computer cannot delete the history in Firefox without a password. I am even willing to switch to another Internet browser if necessary.
View 1 Replies View RelatedI bought a multifunction stylus sx218 Espon model and I can not run the scanner function. I did some research and found a few solutions and very functional. I hope someone solves the problem. My version of openSUSE 11.2.
View 9 Replies View RelatedCode:
#include <iostream>
using namespace std;
[code]...
I am doing some Linux kernel programming for my research project. I need to record the timestamp (by using cpuid and rdtsc) when an interrupt handler (top half) is first invoked. Due to the time critical nature of the problem itself, I have to do the timestamping inside the interrupt handler itself (the first operation when the handler is called). However, I understand that tasks that are not so time critical should be deferred to a tasklet function (bottom half) for processing because other interrupts are disabled in a (top-half) interrupt handler. I am currently out of idea on how I can pass the timestamp information that I have obtained in the interrupt handler to the corresponding tasklet function.
View 2 Replies View RelatedI'm currently using OpenSuse 11.1 web server. This is bad since 11.1 is no longer supported. the reason why I am using it is because Function set_magic_quotes_runtime() was no longer being used. (so I was told)
That being said, is there a way to get Function set_magic_quotes_runtime() to function on the newer versions of OpenSuSE?
the function terminates if no key is pressed for 10 consecutive seconds. I tried using the -t option as suggested in some forums, but my version of showkey doesn't have the option of changing the timeout. The options I get are:
-h --helpdisplay this help text
-a --asciidisplay the decimal/octal/hex values of the keys
-s --scancodesdisplay only the raw scan-codes
-k --keycodesdisplay only the interpreted keycodes (default).
Is it possible to write a script to use this function and still keep the function active until an interrupt is recieved?
I looked on the net for such function or example and didin't find anything, thus after having made one i guess it would be legitimate to drop it to see what others thinks of it.
#!/bin/bash
addelementtoarray()
{
local arrayname=$1
[code]....
I use middle click much more than right with my Asus EEEpc 900, so I prefer to use it with two fingered tap. Default configurations for multiple finger taps are 2 = right and 3 = middle. I got this reversed with this guide ("Make middleclicking work in Firefox again...":[URL] but after an update it doesn't work anymore. I tried to install the .deb again, but Ubuntu tells me that the system already has a newer version of it.
P.S. If only we'd get this configured straight from the GUI of mouse settings like the scrolling options...
I was in the middle of updates when a console message appeared stating it needed permission to exit while others were logged on to my computer.so I clicked cancel because the terminal was still clearly configuring the kernel update.upon clickingh cancel the system crashed and would not boot.what should I do if the system wants to log off befotre its done .was this an early message that would have worked itself out?I have never used gparted before but I know that I will never get a second installation to take without all of the settings being screwed up.
View 6 Replies View RelatedI have been searching for a way to disable middle click in Ubuntu, but all the websites I came across say to edit the /etc/X11/xorg.conf file. but when I open that file in Gedit there is no input device section as described in post #3 @ [URL] all I have in xorg.conf is
Code:
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
[Code]....
I hate the middle click paste feature as I'm always accidentally pasting text in documents.
I'd like to put an applet exactly in the middle of my Gnome Panel, I can't do it manually as the applet size varies so I need a way to put it in the middle always. The applet is dockbarX (a window list) so when I open or close a window the size of the applet changes and then it's not in the middle. Here you are an screenshot of what I'm talking about:[URL]..
View 9 Replies View RelatedI don't know what have I done, but when I switch a window, the cursor always moves to the middle of the window I've just switched to. How can I disable it?
View 2 Replies View Related