Ubuntu :: Script Only Work With 'Front' Or 'Surround'
Jun 8, 2010
I'm having a frustrating problem with a .sh script. It's a fairly simple script to get a volume readout in Conky. I refer to the .sh file in my Conky file as such;
[Code]...
It seems to be talking about; if [ $mute == "[on]" ] What else would it be expecting and why does it work using Front & Surround but nothing else? I've attached a pic. The volume script I'm trying to get working is just under the clock. I'd really love to get the Master volume working on this.
View 2 Replies
ADVERTISEMENT
Apr 26, 2011
I have these Creative Inspire M4500 4.1 surround sound speakers.I got them to work succesfully on my older computer by installing the ALSAmixer. and then unmuting the channels. However on my new computer even after installing ALSAmixer, i cannot seem to be able to get playback from my rear two speakers. I tried the community ubuntu documentation and ALSA's own guide(which seemed too complicated for me.)
View 9 Replies
View Related
Jan 13, 2011
I'm running slack64 13.1, I don't have KDE installed or any of the KDE libraries (so answers concerning KMix aren't going to help), I'm using xfce4 as the desktop environment. Anyway I just bought a new 4.1 surround sound speaker system from Amadeus and wanted to give it a shot. Obviously my first instinct was to plug them in and give it a whack... much to no one's surprise this didn't work. So I googled my ass off, and it seems for every person that has had a surround sound system, there's a different solution for them. I tried a couple tutorials to end at the same disappointing conclusion: the front two speakers and the subwoofer work. So here's the current situation:
The front two speakers are plugged into the speaker-out port (the green one) and the rear-two speakers are plugged into the line-out port (the light blue one). Since the subwoofer works I'm going to assume it uses the the same line that the front two speakers do. I've turned all the lines all the way up in alsamixer, and made sure it's playing on 4 channel. I reran alsaconf just to make sure and it configured snd-intel8x0 for me with no complaints. I also added a .asoundrc file that looks like this:
[Code]...
Then I ran "speaker-test -c 4 -D surround41 -t wav". Again only the front two speakers play any sound. I'm kinda new to configuring sound, as I've never before had a problem.
View 3 Replies
View Related
May 23, 2010
Getting sound out of the back ports just fine. Using an ASUS P5N73-AM motherboard and a fresh install of 10.04. Everything else works perfectly except the blasted front panel headphone port.
View 5 Replies
View Related
Jan 4, 2011
I run Ubuntu 10.10 on my Intel DG965RY. My front audio ports don't work in Ubuntu, the rear one does. I never got it working earlier when I had Ubuntu 10.04 but this time I am going to try it again. My codec is SigmaTel STAC9227
My ALSA information is here.
Handy details:
!!ALSA Version
!!------------
Driver version: 1.0.23
Library version: 1.0.23
Utilities version: 1.0.23
[Code].....
I know something that I will have to change the model of my module to make the front audio jack works but I couldn't find a model related line in my ALSA configuration file - /etc/modprobe.d/alsa-base.conf (I was able to get to that point in Ubuntu 10.04, may be something has changed).
View 9 Replies
View Related
Apr 20, 2011
happened and now half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel. i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 2 Replies
View Related
Apr 20, 2011
now half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel.i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 1 Replies
View Related
Jan 4, 2010
I have installed Ubuntu on my MSI Mega PC but have no sound, also the display on the front of the computer doens't work. Unsure if there are drivers for this but here goes:
[Code]...
View 5 Replies
View Related
Jul 27, 2010
I have got a Creative X-fi gamer card. I have Creative 4.1 speakers. One of the front speaker doesn't work and I use one front and two rear and of course one subwoofer.
In Gnome, it works after I do few commands and all is well. But, in any other desktop environment only the front one speaker works and the rear two don't. Neither in KDE nor in XFCE or LXDE.
I am tearing my hairs on this. And it is indeed the same with other distributions.
Is it because now it has become actually 3.1 and channelling is not happening. But in Gnome they work.
View 3 Replies
View Related
Jul 3, 2011
I just installed 10.10) i had speaker audio on my laptop but the front jacks for head phones didn't work. After fidiling with some config files, i forget which config thing it is in but there was numerous mentions about where you had to put "options I am already added to the audio group for my computer and running vlc as root does not work (vlc-wrapper) regular won't run as root, i tried that because i have fixed other hardware problems by running programs as root. The laptop is a HP Pavillion dv5-1000 and has a regular sound card and a hdmi port (the sound is configured to play out of the non hdmi one)
View 1 Replies
View Related
Sep 19, 2010
I'm trying to switch from debian to fedora (13) and I'm stuck at getting yum to remove leave dependencies.
So far I've installed "yum-plugin-remove-with-leaves" and I'm able to remove leave dependencies if I invoke yum with the "--remove-leaves" argument from command line.
But this doesn't work with graphical front ends and I want to remove unused leave dependencies every time if I remove a package not just if I remember to invoke yum with the "--remove-leaves" argument.
Later on I discovered an option in "/etc/yum/pluginconf.d/remove-with-leaves.conf" named "remove_always = 1" and uncommented it. But yum doesn't seem to care. I still need to add the "--remove-leaves" argument otherwise yum isn't going to remove the leave dependencies.
How to configure yum to handle dependencies the way I used to know from apt under debian? Install a package with a graphical front end and dependencies get pulled in as needed. Uninstall a package later on and dependencies installed in the first place are removed as well if not needed by anything installed in between.
View 5 Replies
View Related
Jun 16, 2010
I would really like to get digital (5.1) surround in Ubuntu 10.04 with pulseaudio. However, when I go to the preferences->sound->hardware setting, I can only select analog surround outputs. The only digital outputs shown are stereo.
View 9 Replies
View Related
Jun 28, 2010
Ubuntu Lucid How can I get Dolby 5.1 Surround with Intel HDA?
View 2 Replies
View Related
Jul 16, 2010
Alsa says I'm using a HDA ATI SB audio card with realtek ALC662 rev 1. chip, I've set the default channels to 6 for 5.1 in /etc/pulse/daemon.conf but got only stereo.
; default-sample-format = s16le
; default-sample-rate = 44100
; default-sample-channels = 6
; default-channel-map = front-left,front-right
I would assume I have to do something with the channel map, but I don't know where to begin. I can say it is not a hardware issue as it works fine in windows 7 where my mic in is my sub-woofer/center out and my line in is my line in is my rear speaker out. I tried going into sound preferences to see if I could get it to use line in and mic in as sub-woof out and rear out , but there was no such option. All I was allowed was analog duplex 1 output / 1 input.
View 8 Replies
View Related
Sep 29, 2010
i recently migrated from windows to linunx
Motherboard intel gccr intel hd auduio My 5.1 sourround sound is detected as stereo in ubuntu i tried alsa and other stuff how to condifure it
View 1 Replies
View Related
Apr 24, 2011
I've got an old Philips 5.1 surround sound system and I'm just wondering how to set it up.Everything's hooked up properly (I think) but it's journeyed to no avail. I'm actually wondering if it's possible. I haven't got a surround sound card. I simply have a twin audio RCA to stereo cable plugged into the sound card.I've set the hardware in sound preferences to Analog 5.1 Surround. Here's the contents of my /pulse/daemon.config
Code:
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
[code].....
View 1 Replies
View Related
May 27, 2011
I'm having trouble after installing Lubuntu-desktop on top of a Ubuntu Server (64 bit). about the reason for this abomination of distributions is to achieve 64 bit Lubuntu. I used to run Ubuntu 64 straight, but didn't like Unity at all; Arch Linux was great up until now, but I'd like to settle down and focus more on productivity.
The situation is thus: I cannot manage to make my X-Fi USB sound card work without hacks, and at best it only works in some applications. I *think* it may be a bug in ALSA, but I had no problem in the latest versions of Ubuntu (11.04 as of this) and Xubuntu even (11.04?).
I can currently only play media in VLC media player using the following hack in my ~./asoundrc
Code:
This works as expected, but not for many applications (which fail to launch, with a error message related to below (no mixer controls))
Code:
What could I be missing? Some diagnostic information (any other information on request):
Code:
I also posted this question here: [url]
View 3 Replies
View Related
Mar 5, 2010
When I decode an audio clip which contain 5.1 streams (the encoding doesn't matter - or does it?) I cannot find an option which allows redirection of the lower frequencies (from front, back and center channels) to the sub woofer (LFE channel). I understand that this perfectly normal and this is how 5.1 supposed to work. My problem is that my speakers are not full range, so they cannot reproduce the bass in the streams. What I want to know is if there is a way to do something like this: [URL]
Which is described as: Bass redir - Bass redirection. Route basses from all channels to subwoofer. Works only if it is subwoofer at output speakers. Highly recommended for systems with separate subwoofer. Basses are routed before mixing so basses are shown at LFE input level (although 'real' LFE may be absent).
I'm aware of the enable-lfe-remixing = yes option. It works fine for stereo, but not for 5.1
I use ubuntu 9.10 and my pulseaudio version is 0.9.19. The player I use most is SMPlayer (version 0.6.8 (SVN r3213)) and AC3-liba52 for AC3 decoding. My system is up to date.
View 3 Replies
View Related
Apr 13, 2010
Just beating my head against a wall lately trying to enable 5.1 surround through the digital out (spdif) of my Audigy SE card. It outputs fine to stereo right now, but watching a DVD with 5.1 selected in any media player (VLC, Totem, Mplayer etc.) still yields stereo output.
View 9 Replies
View Related
Jun 4, 2010
Currently using an Asrock ION 330 with an SPDIF output and running 10.04It works as stereo but can't get the system to run as surround sound and everything shows as 2 channels only.The hardware itself supports it fine as it works under windows 7 without issues so it has to be a config issue somewhere.I have tried everything I can find via google including upgrading the alsa drivers but so far there has been no change.
View 1 Replies
View Related
Jul 22, 2010
I just installed Lucid X64 on my PhenomX4 machine and I can't get my 5.1 speakers working. Only works in stereo.
Sound Preferences have only stereo options, how can I get surround 5.1? If it helps, I have Realtek for sound.
View 9 Replies
View Related
Sep 2, 2010
I own an external usb soundcard: Creative Blaster X-Fi Surround 5.1. After some tweaking around Multimedia Settings, (K)Ubuntu 9.10 successfully detected the card. I can now use it.
However, setting the sound level in KMixer does not work at all - KMixer now only contains a Microphone channel. Using hotkeys, I can still turn volume from 0 to 100%, but that has no effect on the volume produced by the soundcard. The sound card comes with a sound joggle, but turning it left or right has no effect whatsoever on the volume level.
Is there a way to solve either of these issues? p.s. Also, the card came with a Windows app and driver cd.
View 3 Replies
View Related
Oct 4, 2010
I've been trying to get my surround sound(5.1) to work for the past couple of of days, followed a number of guides, but nothing seems to get it working at all. I'm connecting the speakers using 3 analogue audio cables, I have tested and they work fine under Windows. When I go into the Sound options in Ubuntu I don't see a 5.1 profile listed under the Hardware tab, only stereo(and that works fine).
The sound controller is a Realtek ALC892 built-in to my mobo(Gigabyte P55A-UD3).
Here is some info I've seen requested in other threads, I'm running 10.10 RC, but I can assure you it doesn't work under earlier versions.
Code:
Linux Yurippe 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64 GNU/Linux
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
[Code].....
View 9 Replies
View Related
Nov 13, 2010
I just got a 5.1 Surround sound system and set it up. I found that it was only working as stereo, though (That is, only the two frontal speakers were producing any sound). I made sure everything was not muted in alsamixer and checked that the hardware was set to 5.1 in the Sound Preferences Hardware tab.
I'm using Ubuntu 10.10 64bit and my sound card is an onboard Intel DG41TY, Realtek ALC888VC codec.
View 1 Replies
View Related
Jan 2, 2011
I recently purchased a Creative Fatal1ty headset with a USB connection, and was wondering if it's possible to use its 5.1 surround sound capabilities under Ubuntu.
View 1 Replies
View Related
Mar 20, 2011
I have a Acer Aspire Revo R3600 running Ubuntu 10.10. Its a clean install, all I have done is update the NVidia drivers and ASLA. The PC connects to my AV Receiver via HDMI and I have stereo sound but no surround sound. If I go to System > Preferences > Sound and look under the hardware tab I only have "Internal Audio Digital Stereo (HDMI) Output" and no mention of surround sound or 5.1 etc. I assume this is part of the problem.
View 2 Replies
View Related
Jul 24, 2011
In my dell xps 15 i have an onboard sound card which is 'Intel High Definition audio' code...
the problem is my sound system (Creative INSPIRE 5300) take input through three 3.5 mm jacks one for front right and left, one for rear right and left, and one for center and subwoofer.
In windows 7 when i connect each jack it asks me which device am i connecting and i can select each one accordingly. (the rear two speakers were connected to the mic in port of the system.)
now in ubuntu 11.04 i cannot configure the system to get the sound out through the 3.5 mm jacks.. i can select the sound device to get the sound out through the hdmi port but unfortunately i don't have an hdmi surround system.
View 1 Replies
View Related
May 11, 2011
I have a 4.1 surround setup that the computer sees a 4 channel setup (stuff going to subwoofer is split out in hardware so all the computer sees is the front and rear l/r channels).
All well and good, but phonon isn't giving me an option to set my output to 4 channels, only stereo (which means my rear speakers are useless) or 5.1 (which makes me fear losing channels if I play anything with actual surround sound).
View 3 Replies
View Related
Apr 23, 2011
I cant get sarround on pulseaudio
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
I have 5.1 speaker, sound is only from front, front left && front right and from subwofer its no sound from rear left and right.
View 6 Replies
View Related
Jul 10, 2011
i have problem to get my 5.1 surround sound card to work properly on Slackware 13.37 with example the Mplayer, Spotify or even when watching movie-clips at .....s. I have searched through forum but havent find any solutions to this problem.I have tested my sound card and it seems to work properly when executing "speaker-test -Dplug:surround51 -c6 -t wav" in the terminal. I have saved the ALSA settings through "alsactl store". But like i said, it still doesnt work with explicitly programs like Mplayer or Spotify, it still plays the sound as 2.1 (stereo).
View 3 Replies
View Related
