Ubuntu Multimedia :: Play 5.1 Surround Through Three 3.5 Mm Jacks In A Laptop?
Jul 24, 2011
In my dell xps 15 i have an onboard sound card which is 'Intel High Definition audio' code...
the problem is my sound system (Creative INSPIRE 5300) take input through three 3.5 mm jacks one for front right and left, one for rear right and left, and one for center and subwoofer.
In windows 7 when i connect each jack it asks me which device am i connecting and i can select each one accordingly. (the rear two speakers were connected to the mic in port of the system.)
now in ubuntu 11.04 i cannot configure the system to get the sound out through the 3.5 mm jacks.. i can select the sound device to get the sound out through the hdmi port but unfortunately i don't have an hdmi surround system.
View 1 Replies
ADVERTISEMENT
Aug 2, 2011
I have a laptop with 2 headphone jacks. Can I have different things come from each one?
View 3 Replies
View Related
Oct 28, 2009
Im using Ubuntu 9.04 in my acer aspire 6930 laptop. Inbuilt speakers in my laptop is working, however the external or surround speaker system say 2.1 connected to my laptop is not working.. i just want to know possible solutions for this challenge..
View 4 Replies
View Related
Jan 4, 2011
I run Ubuntu 10.10 on my Intel DG965RY. My front audio ports don't work in Ubuntu, the rear one does. I never got it working earlier when I had Ubuntu 10.04 but this time I am going to try it again. My codec is SigmaTel STAC9227
My ALSA information is here.
Handy details:
!!ALSA Version
!!------------
Driver version: 1.0.23
Library version: 1.0.23
Utilities version: 1.0.23
[Code].....
I know something that I will have to change the model of my module to make the front audio jack works but I couldn't find a model related line in my ALSA configuration file - /etc/modprobe.d/alsa-base.conf (I was able to get to that point in Ubuntu 10.04, may be something has changed).
View 9 Replies
View Related
Feb 19, 2010
I like to play videos from my laptop on my tv in my bedroom using an hdmi cable. I used it in windows all the time. I have gotten Ubuntu configured to play the video and sound but I cant figure out a way to keep playing when I close the lid. Every time I do that it goes black. Also when I re-open it the laptop display is blank as well and will not come back on.
Under the power option when lid closed all it offers is
Blank screen
Suspend
Hibernate
shut down
In Windows I had a "do nothing"
Anyway to do this in Ubuntu?
View 2 Replies
View Related
Nov 10, 2010
I just got my new Shuttle SG41J1 v2. Everything works fine under 10.10 except audio. I can hear sound at the headphone-jack on the frontpanel but the jack on the rear isn't working. I tried different models in /etc/modprobe.d/alsa-base.conf (3stack, 5stack, test), nothing helped. All channels in alsamixer are unmuted and the sliders turned up. In the output of alsa-info.sh I can see Nodes for all jacks (Speaker, Mic and Line-In at Ext-Rear for example) but alsamixer and all other mixer-applications I tried shows only Master, PCM, Front Mic, Line, Mic and Aux (all in the Playback section). Also I found nothing in /usr/ share/doc/ alsa-base/driver/HD-Audio-Models.txt.gz about my Codec "IDT ID 76c1".
View 9 Replies
View Related
Jun 1, 2010
I looked around the settings on Ubuntu and I cannot prevent sound from being played on my laptop speakers when external (more powerful) speakers are plugged in. Windows automatically defers all sound output to the external ones as soon as it is plugged in.
View 6 Replies
View Related
Jan 29, 2010
with my motherboard the onboard back sound jack's audio is VERY quiet, but the front jacks wired into HD audio work fine. (I'm building an htpc, btw.)
I tried for weeks to get it to work, but eventually I just pulled a cheap Dynex DX-SC51 card from another machine and turns out it works, but now I can't use the inputs and headphone jack on the front of the case without going into system>preferences>sound and changing "output" back to "internal analog audio stereo"
Is there any way to activate these two audio devices at the same time?
View 1 Replies
View Related
Apr 28, 2011
vlc is struggling to play movies when laptop is running on bettery.Like the video is streaming like a group of screenshots but the audio is good..happening for all video formats...Am using a dell studio laptop..ubuntu version 10.04...am seriously unable to watch the movies this terrible.
View 1 Replies
View Related
Aug 23, 2011
I have a Acer emachine E732z laptop. I have installed debian squeeze gnome, but it is unable to play audio through laptop speaker. The (3.5mm)audio jack is working fine and I can play audio through it. I have also installed Linux mint, but no audio(in speaker and audio jack). There is no such problem in Windows7.
View 1 Replies
View Related
Jul 3, 2011
I just installed 10.10) i had speaker audio on my laptop but the front jacks for head phones didn't work. After fidiling with some config files, i forget which config thing it is in but there was numerous mentions about where you had to put "options I am already added to the audio group for my computer and running vlc as root does not work (vlc-wrapper) regular won't run as root, i tried that because i have fixed other hardware problems by running programs as root. The laptop is a HP Pavillion dv5-1000 and has a regular sound card and a hdmi port (the sound is configured to play out of the non hdmi one)
View 1 Replies
View Related
Apr 17, 2011
I'm having problems with trying to play 3d games or xbmc on a Compaq Evo N1020v laptop with Ati Radeon IGP 330M/340M/350M graphic card. Compiz works, glxgears works but any attempt to play 3d games results in failure.
[Code]...
View 3 Replies
View Related
Jul 16, 2010
Alsa says I'm using a HDA ATI SB audio card with realtek ALC662 rev 1. chip, I've set the default channels to 6 for 5.1 in /etc/pulse/daemon.conf but got only stereo.
; default-sample-format = s16le
; default-sample-rate = 44100
; default-sample-channels = 6
; default-channel-map = front-left,front-right
I would assume I have to do something with the channel map, but I don't know where to begin. I can say it is not a hardware issue as it works fine in windows 7 where my mic in is my sub-woofer/center out and my line in is my line in is my rear speaker out. I tried going into sound preferences to see if I could get it to use line in and mic in as sub-woof out and rear out , but there was no such option. All I was allowed was analog duplex 1 output / 1 input.
View 8 Replies
View Related
Sep 29, 2010
i recently migrated from windows to linunx
Motherboard intel gccr intel hd auduio My 5.1 sourround sound is detected as stereo in ubuntu i tried alsa and other stuff how to condifure it
View 1 Replies
View Related
May 27, 2011
I'm having trouble after installing Lubuntu-desktop on top of a Ubuntu Server (64 bit). about the reason for this abomination of distributions is to achieve 64 bit Lubuntu. I used to run Ubuntu 64 straight, but didn't like Unity at all; Arch Linux was great up until now, but I'd like to settle down and focus more on productivity.
The situation is thus: I cannot manage to make my X-Fi USB sound card work without hacks, and at best it only works in some applications. I *think* it may be a bug in ALSA, but I had no problem in the latest versions of Ubuntu (11.04 as of this) and Xubuntu even (11.04?).
I can currently only play media in VLC media player using the following hack in my ~./asoundrc
Code:
This works as expected, but not for many applications (which fail to launch, with a error message related to below (no mixer controls))
Code:
What could I be missing? Some diagnostic information (any other information on request):
Code:
I also posted this question here: [url]
View 3 Replies
View Related
Mar 5, 2010
When I decode an audio clip which contain 5.1 streams (the encoding doesn't matter - or does it?) I cannot find an option which allows redirection of the lower frequencies (from front, back and center channels) to the sub woofer (LFE channel). I understand that this perfectly normal and this is how 5.1 supposed to work. My problem is that my speakers are not full range, so they cannot reproduce the bass in the streams. What I want to know is if there is a way to do something like this: [URL]
Which is described as: Bass redir - Bass redirection. Route basses from all channels to subwoofer. Works only if it is subwoofer at output speakers. Highly recommended for systems with separate subwoofer. Basses are routed before mixing so basses are shown at LFE input level (although 'real' LFE may be absent).
I'm aware of the enable-lfe-remixing = yes option. It works fine for stereo, but not for 5.1
I use ubuntu 9.10 and my pulseaudio version is 0.9.19. The player I use most is SMPlayer (version 0.6.8 (SVN r3213)) and AC3-liba52 for AC3 decoding. My system is up to date.
View 3 Replies
View Related
Jun 4, 2010
Currently using an Asrock ION 330 with an SPDIF output and running 10.04It works as stereo but can't get the system to run as surround sound and everything shows as 2 channels only.The hardware itself supports it fine as it works under windows 7 without issues so it has to be a config issue somewhere.I have tried everything I can find via google including upgrading the alsa drivers but so far there has been no change.
View 1 Replies
View Related
Jul 22, 2010
I just installed Lucid X64 on my PhenomX4 machine and I can't get my 5.1 speakers working. Only works in stereo.
Sound Preferences have only stereo options, how can I get surround 5.1? If it helps, I have Realtek for sound.
View 9 Replies
View Related
Sep 2, 2010
I own an external usb soundcard: Creative Blaster X-Fi Surround 5.1. After some tweaking around Multimedia Settings, (K)Ubuntu 9.10 successfully detected the card. I can now use it.
However, setting the sound level in KMixer does not work at all - KMixer now only contains a Microphone channel. Using hotkeys, I can still turn volume from 0 to 100%, but that has no effect on the volume produced by the soundcard. The sound card comes with a sound joggle, but turning it left or right has no effect whatsoever on the volume level.
Is there a way to solve either of these issues? p.s. Also, the card came with a Windows app and driver cd.
View 3 Replies
View Related
Oct 4, 2010
I've been trying to get my surround sound(5.1) to work for the past couple of of days, followed a number of guides, but nothing seems to get it working at all. I'm connecting the speakers using 3 analogue audio cables, I have tested and they work fine under Windows. When I go into the Sound options in Ubuntu I don't see a 5.1 profile listed under the Hardware tab, only stereo(and that works fine).
The sound controller is a Realtek ALC892 built-in to my mobo(Gigabyte P55A-UD3).
Here is some info I've seen requested in other threads, I'm running 10.10 RC, but I can assure you it doesn't work under earlier versions.
Code:
Linux Yurippe 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64 GNU/Linux
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
[Code].....
View 9 Replies
View Related
Nov 13, 2010
I just got a 5.1 Surround sound system and set it up. I found that it was only working as stereo, though (That is, only the two frontal speakers were producing any sound). I made sure everything was not muted in alsamixer and checked that the hardware was set to 5.1 in the Sound Preferences Hardware tab.
I'm using Ubuntu 10.10 64bit and my sound card is an onboard Intel DG41TY, Realtek ALC888VC codec.
View 1 Replies
View Related
Jan 2, 2011
I recently purchased a Creative Fatal1ty headset with a USB connection, and was wondering if it's possible to use its 5.1 surround sound capabilities under Ubuntu.
View 1 Replies
View Related
Mar 20, 2011
I have a Acer Aspire Revo R3600 running Ubuntu 10.10. Its a clean install, all I have done is update the NVidia drivers and ASLA. The PC connects to my AV Receiver via HDMI and I have stereo sound but no surround sound. If I go to System > Preferences > Sound and look under the hardware tab I only have "Internal Audio Digital Stereo (HDMI) Output" and no mention of surround sound or 5.1 etc. I assume this is part of the problem.
View 2 Replies
View Related
Apr 26, 2011
I have these Creative Inspire M4500 4.1 surround sound speakers.I got them to work succesfully on my older computer by installing the ALSAmixer. and then unmuting the channels. However on my new computer even after installing ALSAmixer, i cannot seem to be able to get playback from my rear two speakers. I tried the community ubuntu documentation and ALSA's own guide(which seemed too complicated for me.)
View 9 Replies
View Related
Oct 29, 2010
Here is the update to the old thread that somehow disappeared "HOWTO: A52 Encoded 5.1 Surround Sound Awesomeness with PulseAudio and ALSA on Hardy" thread (archived here). See also this bug report.There are two steps here: add the a52 plugin, and tell pulseaudio to use it.
Step 1:
Go to a terminal and do the following:
Code:
sudo bash
echo "pcm.a52 {[code]....
Pulse should come back on its own unless you disabled autospawn.Now pulse should be aware of your digital surround output. Go to System -> Preferences -> Sound. Click on the "Hardware" tab and change the profile to one of the 'Digital Surround 5.1' profiles. Play some sound (I like to test with www.pandora.com) and enjoy!If it doesn't show up, it probably means that alsa didn't create it correctly. To test if alsa sees the a52 device, type:
Code:
aplay -D a52:0
If it errors out (audio open error: No such file or directory) then that means it did not like your asound.conf settings. You might learn something by looking at the output of 'sudo alsa reload' or just 'aplay'.[code].....
View 9 Replies
View Related
Nov 8, 2010
I got a 5.1 desktop sound sys for my recently built gaming rig. It sounds great. On Windows, that is. In ubuntu when I'm playing music, primarily when the subwoofer plays the bass, the speakers sound like they're farting and ripping phone books in half. Also, they get very statticy and sort of quiet. In sound preferences, analog stereo duplex is selected, if that's of any value. How can I get good sound playback in ubuntu?
View 1 Replies
View Related
Mar 16, 2010
Well i will write this down one more time i hope you don't delete it again To enable surround sound with ALC888 on Intel DG31PR for all versions of ubuntu inluding Lucid.(this works on other distros with alsa as well) gksu gedit /etc/modprobe.d/alsa-base.conf Find this line (if there is no such line (or the file is empty) it doesn't matter just add the next line and save it)(note that on older Ubuntu versions the file is named "alsa-base" as far as i remember): # Prevent abnormal drivers from grabbing index 0
Add this line after the #Prevent abnormal drivers from grabbing index0: options snd_hda_intel model=3stack-6ch-dig Then use this command to edit pukeaudio: gksu gedit /etc/pulse/daemon.conf
Find this line:
; default-sample-channels = 2
Change it to (make sure to remove the ; in front of it):
default-sample-channels = 6
[Code]...
View 3 Replies
View Related
May 29, 2010
I bought the Creative X-Fi 5.1 Surround USB card today and it works flawlessly with my 5.1 speaker set that I use for my computer. However, in the next few days, I'm getting a 5.1 home theater system to which I want to hook up both my new SACD player and my PC.
I got the Creative because it has an optical output, so it should allow me to send 5.1 audio to the receiver. I'm a bit confused, though, because when I look at my hardware tab in the Sound Preferences, I only have the options that I attached to choose from. There is no digital/optical multichannel profile in there.
View 9 Replies
View Related
Jun 18, 2010
On my initial setup I follow the Comprehensive sound guide that is posted on the ubuntu forums because I wanted to get the spdif work Optical out with surround. After a while I was able some how to get it to work and but my headphones would no longer output sound so in an effort to get sound back to the headphones I maanged to ruin the the settings for the spdif.My question is how can I get spdif back and switch between headphones and spdif.I there no way to figure it out how do I purge every file that has to do with sound and recompile. ( THe comprehensive sound guide showed how to purge the alsa utils but that didnt work if someone know why please let me know and if you could explain.)
View 1 Replies
View Related
Sep 12, 2010
I found out there is no way to install headset's own drivers. At least I am looking for a way to switch its 5.1 property on. Is there any way for it on ubuntu 10.04 with pulse or whatever works?
View 1 Replies
View Related
