When I try to copy PDF files from one folder to another folder, it give me this error: "Error while copying "2004-SNUG-Europe-paper_...log_DPI_with_SystemC.pdf". There was an error copying the file into /media/CCDCE66BDCE64F70/Backup Master/Heterogeneous_cosimulation/Documentation" "Error splicing file: Input/output error" What is the reason of this error and how can this be fixed?
View 9 RepliesI have a 7.2 GB file (VMWare virtual machine file) that I am trying to copy from its original location to the another folder OR to external hard drive...each time I try to do this, I always get the following error after the copying process reach 'exactly' 1.4 GB
Error reading from file input/output error
And I have to either Cancel or Skip
I've tried to split the files to smaller pieces but the idea didn't work as I still get the same error whenever I try to compress/ split or do any operation with this file. how I can copy this file?
I recently upgraded my file/media server to Fedora 11. After doing so, I can no longer copy large files to the server. The files begin to transfer, but typically after about 1gb of the file has transferred, the transfer stalls and ultimately fails with the message:
"Error writing to file: Input/output error"
I've run out of ideas as to what could cause this problem. I have tried the following:
1. Different NFS versions: NFS3 and NFS4
2. Tried copying the files to different physical drives on the server.
3. Tried copying the files from different physical drives on the client.
4. Tried different rsize and wsize block sizes when mounting the NFS share
5. Tried copying the files via a different protocol. SSH in this case. The file transfers are always successful when I use SSH.
Regardless of what I do, the result is the same. The file transfers always fail after approximately 1gb.
Some other notes.
1. Both the client and the server are running Fedora 11 kernel 2.6.29.5-191.fc11.x86_64
I am out of ideas. Has anyone else experienced something similar?
I have seen this 3 times now - it's an updated Lucid with EXT4, trying to copy to a 500G USB drive?
View 3 Replies View RelatedI just received a 1TB external(Western Digital) hard drive(NTFS) for backup purposes. I'm using an Ubuntu Live CD, and an external hard drive dock. I am transferring over esata and am receiving the error:
Code:
Cannot open file: input/output error
Seems strange that it said "open". At any rate only about 60 of the 200+ GB were able to be transferred over...this won't do. I have tried to copy via CLI using
Code:
cp -r
and received the same issue. For clarification I am attempting to transfer from a mounted partition onto the mounted external.
I got a new HDD like a Storage on my Ubuntu ,it is formated as ext3 and i am able to mount it ,but sometimes while downloading from FTP ,when the session broke Ubuntu crates some ./afternature.mp4 Input/output error ,which i can see on "ls -l" ,and that causes great troubles to me ,because i can not copy or write on that disk another file with the same one which is created like this ,these error are gone only if i format the hdd .
My mounting command is "mount /dev/hdb3 /tmp/hd ext3 rw 0 0" So is that possible to remove these error without formatting the disk . PS:I did a lot of search for that error ,on unix forums also here but i didn`t find a concrete answer ,i found a thread which is for that case but removing with inode is impossible because on ls -l i`m not receiving the inode .
When running rsnapshot tonight it failed with a bunch of
cannot remove `file': Input/output error
errors.
I navigated to the directory and tried to delete it manually and I got the same errors. I tried with 'sudo rm directory'. How else can I delete this directory? What would cause a situation like this?
I'm trying to create an iso file in a terminal with the following command:
$cat /dev/sr0 > nameofdisk.iso
I get the following error
cat: /dev/sr0: Input/output error
I already checked and my optical drive is indeed /dev/sr0. I've hunted google a few hours trying to figure it out. Does anyone know why I'd be getting this error?
I want to install Xubuntu 10.10 x64, but it does not work. While copying data the setup tells me about an Input/Output error, but i don't think there are hardware errors.
The environment:
AMD Phenom II 1055t 6x2,8 Ghz
2x 2gb ram
Hitachi 1TB hard drive
Two partitions: 1st for Windows 7 Ultimate (NTFS), 2nd for my Data (NTFS)
So I decreased the size of the data partition and created two new partitions beside the Win7 partition and the data partition. The first is ext4-journal (20gb) the second is Swap (4gb). I've done that all by the Xubuntu setup.
I've downloaded the image from the german mirror (TU Chemniz) and checked the integrety via SHA1. Checksum was correct. I also checked the data after burning.
I am curious if perhaps I am doing something wrong extracting pages from a pdf doc using pdftk and creating a new file. I am only extracting the odd pages from the file and outputting them to a new file that is now only 20 pages instead of the input's 40 pages, yet the new output file is still 1.4Mb in size, the same as the original.
It seems strange to extract only half the pages of a large document and end up with a result that is the same size. how to streamline the resulting pdf's using pdftk?
BTW this is the command I am using, in case perhaps I am missing an option to optimize file size or something:
Code:
pdftk A=ch15.pdf cat A1-40odd output odd.pdf
I am new to shell scripting.What i am trying is to write a shell script which take the input file and output should like as mentioned below.Output file should have data till SOK (marked in red)from every second line and then the selected data(marked in green) from 4th line.So selected data from 2nd and 4th line in one line of O/P file and then similarly selected data from 6th and 8th line in second line of O/P file.Input File:
3c3
< c1111;11.11.11.11;pOK;SOK:abcde;Universe:aa
---
[code]...
I booted my Fedora 13 live CD on my Dell server, and configured networking and SSHd. On my desktop I logged into the live cd and started copying over a big file (1.5 GB) (i.e. copying from the desktop computer to the server). After copying about half the fil, the download fails with an error message about the filesystem being read-only.I've seen this exact same behavior on both i386 and x86_64 of the same live CD, but don't know why it's happening. I've also had the same issue when copying small files. In /var/log/messages these messages are repeated many times:
Code:
Dec 20 12:32:23 localhost kernel: Buffer I/O error on device dm-0, logical block 684075
Dec 20 12:32:23 localhost kernel: lost page write due to I/O error on dm-0
[code]....
whenever I copy (or move) files from one place on my hd to another One or two of them dont copy, and I get an error similar to " There was an error copying the file into [location]. Show more details> Error splicing file: Input/output error. The file is always an .avi file and always between 600MB and 1.4GB in size, how can I fix this problem?
View 9 Replies View RelatedI have a headset microphone plugged into the built-in audio input. The output is plugged into an amplifier > speakers.
Pulseaudio is "helpfully" routing the microphone input signal to the speaker output. I do not want this. I go to pavucontrol and disable the "monitor of the internal audio analog stereo" -- and what I say into the microphone is still coming out of the speakers.
Google gives a lot of information about how to live-stream mic input over the Internet. And, I found this here (that's for karmic, I'm running lucid):
[URL]
... but that's about how to ENABLE loopback. It says loopback should not be enabled by default, but I very clearly hear that something is doing the same thing as loopback.
(Of course, I need to hear sound from applications that are playing, and when I'm dictating text into NaturallySpeaking running under virtual box, I need sound input to go there -- so turning the mic all the way down to zero is not the solution.)
I'm fairly sure I remember hearing this behavior ever since installing Ubuntu, and I didn't do anything to turn it on. I can't imagine most users would prefer this behavior -- if it's the default behavior, why? It makes absolutely no sense to me. (Sorry. It's one of those piddly little configuration things that costs a couple of hours of web searching time, and after a while I just have to give up, but not before becoming much more frustrated than I should have to.)
So, to be clear, here's what I want:
- Applications playing audio should send sound to the main output.
- Applications receiving audio input should hear the microphone.
- Microphone sound should not EVER go to the main output unless I have explicitly launched an application making the connection. (The signal goes input -> output even when NO application is open - hence my consternation.)
I am trying to copy a 7.3gb .iso file to an 8gb USB stick and I get the following error when it hits 4.0gb
Error while copying "xxxxxx.iso". There was an error copying the file into /media/6262-FDBB. Error splicing file: File too large The file is to be used by a windows user, and I'm just trying to do a simple copy, not a burn to USB or anything fancy. Using 10.4.1.LTS, AMD Dual Core, all latest patches.
i have this .mkv file of a movie which is of size 7.9GB and when i try to copy it to my external drive after some time it shows a error saying "Error splicing file: file too long" so how to copy help
my external HD's file format is vfat. and i am using ubuntu 10.04
I'm using fedora 13 to connect to my server's share folder(windows server 2003) and i found that i can create folder,create file, access and open or delete the file in the window share folder, but i can't save or replace the file in the share folder. the error message is like below...there are error copying file into smb://path/folderShow more detail:
Invalid argumenti also have attach the pictureby the way....i had disable the firewall and selinux already....but still can't save the file into the window share folder.previously i use fedora 11 and all is ok with no problem, but the fedora13 got this problem, please tell me what cause this happen?
when I try to print the current keyboard layout with "xkbprint -o layout.ps" it gives me the error mentioned in the subject. I also remember printing it a couple of weeks ago (and I'm sure I didn't specify any additional options), but now it just doesn't work. Everything I read on the Net assume this command prints the current layout, and so far I haven't discovered even the slightest mention of this error. It's a trifle, but it drives me mad. What could I be doing wrong?
View 1 Replies View RelatedI am having problems with scp during a backup operationI added a ps -ef before and after the scp operation used during the backup.The backup is a script to backup a Zimbra ServerI am including the code segment that I am having problems
Code:
# DRCP Section. To scp newly created archives to a remote system
if [ "$DRCP" = "yes" ]
[code]...
We make everyday a DB Mysql backup on Linux redhat Enterprise. We are using a bash shell script (and putting it in the crontab) to execute it automatically everyday. We added a line to this script telling, once the backup has completed, to find old backup files (stored on hard disk after each backup) older than x days to remove them. We use the find command (search for file type) with the mtime option and in combination with rm command. Everything runs ok but we also want to add some new code to the same line: If find command cannot find anything or fails, for example if it cannot delete file or fails, send the error message (standard error output) to an error file (like error000001 and increasing) and mail the errorxxxx file to an email address for example to admin@companyname.com. What would be the code for this issue to add it to our find command in the same bash shell script??
View 2 Replies View RelatedUbuntu 9.10 64-bit
Lenovo T400
I'm trying to install gopenvpn from source. [URL] I'm pretty sure I have all the necessary libraries installed.
./configure ends with:
.
.
.
configure: creating ./config.status
config.status: creating Makefile
config.status: creating pixmaps/Makefile
config.status: creating src/Makefile
config.status: error: cannot find input file: `po/Makefile.in.in'
Asuming I have two files, one large file and one small file, I want to write the smaller file to the large file without overwriting the remaining part of the larger file.
Both are binary files, and the large file can become very large, so I want to avoid copying the whole file, as that will take some time. Is there any standard Linux console utility to do this, or do I need to write it myself?
I have a bash script that i created for a colleague to configure the servers he installs. It does package installations, modifies some config files, creates directories.
The problem is sometimes he says that the script skips some steps. There are some steps that require user input and i think he chooses wrong option. (i have tested the script and it works fine).
My question is how can i save the output in a file (or log) so i can check if there are error? I know about the ">>" operators but will this "script.sh >> output.txt" still bring the dialogs for user input (like read input from shell and mysql password dialog from install package)? And how can i record everything he inputs?
I read about logger, but since there are a lot of commands do i have to log every command or can i just log the whole script.
I don't know the format of these old floppie disks, ive tried
Code:
PC8-248suse:~ # file -s /dev/fd0
/dev/fd0: ERROR: cannot read `/dev/fd0' (Input/output error)
how i can go about reading this data?
when iam opening my dec_backup folder the folling error is appering :
the error is gzip :stdin:input /output error
/bin /gstar :unexpected EOF in archive
/bin /gstar: error is not recoverable :exesting now
Today went from jaunty to koala then to lucid. The package manager doesnt work nothing works in terminal for apt-get or anything getting the message ---->
View 1 Replies View RelatedQuote:Error benchmarking: helper exited with exit code 1: Error reading 27099136 bytes at 2509258752 from /dev/sda: Input/output errorthis issue is also preventing me from making a copy/backup of the partition with gpartedwhich i decided i should do since i had a scare when booting todayunable to mount / i said fix itthen it said /var was not readyi waited it became readyi am running 10.04.2 would upgrading the kernel to get trim support fix it?
Code:
sudo fsck -t ext4 /dev/sda1
fsck from util-linux-ng 2.17.2
e2fsck 1.41.14 (22-Dec-2010)
System: clean, 247383/983040 files, 1394162/3907803 blocks
Solution: drive is under warranty and it needs to be used this is not software problem
I am splitting a file based on the values read from an input file. The below one is the script.
1)How do I add the header which is present in the original file to the new split files created?(For eg. pharmacyf conatins header as table column names. The new files created (ODS.POS.$pharmacyid.$tablename.$CURRENT_DATE.dat) are without the header).
2) Also the script is creating 0 byte files for the pharmacyids which are not available in the intial file? Can this be avoided?
for pharmacyf in *
do
tablename=`echo $pharmacyf |cut -f4 -d'.' `
while read pharmacyid
do
grep -w $pharmacyid $pharmacyf >> $OUT/ODS.POS.$pharmacyid.$tablename.$CURRENT_DATE.dat
done< inputfile
done
I have dir in my HD that is very important to me,but when I try cd commad to go in the dirI got this message:cannot access `./Lab': Input/output erroralso when use ls to view the currently dir and the other dir's also I got this message:"ls: cannot access Lab: Input/output errorLab"with touch:touch: cannot touch `Lab': Input/output errorwith mkdir:mkdir: cannot create directory `Lab': Input/output error
View 3 Replies View RelatedI downloaded Go-OpenOffice from SlackBuilds.org, but I can't build it. make terminates with configure error: checking for C compiler default output file name. configure: error: in `/tmp/SBo/ooo-build-3.1.1.5': configure: error: C compiler cannot create executables See `config.log' for more details.
(I can't find config.log anywhere) I use a quite 'light' installation (no xap, ap), and I suspect that I have some unmet dependencies, but the error message provides no information about what software is needed (I've installed all dependencies listed on SlackBuilds.org). I'm using Slackware64-13 with Xfce