Ubuntu :: Retrieve Data Created On Another System?

Aug 23, 2010

My son's laptop with Ubuntu on went belly up, so before we dumped it I salvaged the hard disk.....now some weeks later he remembers there is some things he wants on the disk. Luckily I had done nothing with it ....have just connected the disk to my system I can see everything above(should that be below) home but not anything in his account. Any bright ideas for getting at his data is there a way of mass changing permissions or whatever?

View 3 Replies


ADVERTISEMENT

Red Hat / Fedora :: Retrieve Data From Hard Disk After Installation On The System?

Aug 17, 2009

I have never used Linux before and know nothing about it . But my cousin installed a Fedoro linux CD on my laptop which previously had Lotus symphony . Unfortunately my laptop had single partition and so Linux overrode the old OS ,ie lotus symphony .

I have some critical data on my hard disk but I have no clue how to take backup this data using Linux . I desparately need this data .

Could somebody let me know how I can access this data and take the backup ?

View 4 Replies View Related

General :: Partitioning - Difference Between File System Created By Fdisk And File System Created By Mkfs?

Aug 1, 2011

I'm a little bit confused with partitioning the filesystem in Linux. the difference between creating the file system with fdisk and mkfs (when formatting the disk). I can't clearly tell my problem, so please look at this picture:

View 2 Replies View Related

Ubuntu :: XP Crashed Out And Couldnt Retrieve My Data

Jul 29, 2010

I have a laptop that had Windows XP on it - XP crashed out and I couldnt retrieve my data of it, despite booting up in safe mode, it just didnt want to do anything. So i thought i will load ubuntu instead then try and recover my data - bad move. Now my question is, can I still retrieve the windows data of the hard drive despite having Ubuntu installed on the same drive? I know on windows there is an app called File Scavenger that recovers deleted files even after loading a clean slate of Windows on it. Is there something like that for Linux? I had photos on it that has some real sentimental value. The rest of the data I dont care about. Just the photos. I didnt think before I reloaded it.

View 7 Replies View Related

Ubuntu :: Using Perl Module To Retrieve Data From IPod

Apr 29, 2010

I am trying to make use of the perl module WWW::Nike::NikePlus to retrieve the data from my ipod but apparently I have no idea what I am doing. I installed the package just as the readme said including all the dependencies. I cant really figure out how to run it, i searched for how to use it and found this : Example use that retrieves and prints your last run information

use WWW::Nike::NikePlus;
my $username = 'my@email.address';
my $password = 'MySecretPassword';
my $locale = "en_us";
my $pin = nike_authenticate( $username, $password, $locale );
unless( $pin ) { print "Authentication failed
"; } .....

#Details of the last run
my ($unit, $last_run_dist, $last_run_duration_millisecs,
$last_run_duration_friendly, $last_run_pace_friendly) = nike_last_run();
print "Last run: $last_run_dist$unit in $last_run_duration_friendly
";
print "Last run pace: $last_run_pace_friendly per $unit
";

So I put it in a txt file and saved it with the extension .pl and of course I put in all my info in the username password fields then made it executable with the command sudo chmod +x nikeplus.pl and when I try to run it with either ./ or perl I get this output:

brandon@desktop:~/Apps/nikeplus$ ./nikeplus.pl
./nikeplus.pl: line 1: use: command not found
./nikeplus.pl: line 2: my: command not found
./nikeplus.pl: line 3: my: command not found
./nikeplus.pl: line 4: my: command not found
./nikeplus.pl: line 6: syntax error near unexpected token `('
./nikeplus.pl: line 6: ` my $pin = nike_authenticate( $username, $password, $locale );'
brandon@desktop:~/Apps/nikeplus$ perl nikeplus.pl
Use of uninitialized value $ENV{"TEMP"} in concatenation (.) or string at /usr/local/share/perl/5.10.0/WWW/Nike/NikePlus.pm line 10.
Use of uninitialized value $last_run_duration_millisecs in division (/) at /usr/local/share/perl/5.10.0/WWW/Nike/NikePlus.pm line 106.
Use of uninitialized value $last_run_dist in division (/) at /usr/local/share/perl/5.10.0/WWW/Nike/NikePlus.pm line 107.
Use of uninitialized value $last_run_duration_millisecs in division (/) at /usr/local/share/perl/5.10.0/WWW/Nike/NikePlus.pm line 107.
Illegal division by zero at /usr/local/share/perl/5.10.0/WWW/Nike/NikePlus.pm line 107.
brandon@desktop:~/Apps/nikeplus$

View 2 Replies View Related

Ubuntu :: Finding A Program To Store And Retrieve Data?

May 22, 2010

I am looking for a program to help me store, organise and retrieve information. The aim would be to keep notes from literature, concepts and ideas which i come across during my studies. It's always a hassle to retrieve this information when i have to write a paper for instance. So in fact what i need is a sort of wikipedia-like program where information is searchable and where perhaps hyperlinks could lead me from one word/note to another.

View 2 Replies View Related

Ubuntu :: Hard Drive Failed - Retrieve Data?

May 28, 2010

I should have seen this coming when I lost the ability to boot windows, or mount that drive from ubuntu. But now I think my hard drive has failed. Is there any way to retrieve the data from the hard drive, or my settings and the like for ubuntu? I'm at a loss for what to do as i'm booting from a CD right now =X.

View 4 Replies View Related

Ubuntu Security :: Retrieve The Data From Hard Drive?

Mar 24, 2011

I have a friend that has a computer running UBUNTU he has not used in a while and has forgotten the user name and password for it. Is there away to retrieve the data from this hard drive?

View 2 Replies View Related

General :: How To Retrieve Lost Data On A Usb Stick

Jan 24, 2010

My wifes computer, IBM desktop, running XP, was hit by malware. I managed to save the data and tarred it and copied to a USB memory stick using my Linux box Ubu 9.1). I checked and saw it had been truly saved. Two days later I put stick in USB port and it was not recognized (usually any hot plugable device shows up immediately on desktop). I have tried plugging it into a windows machine and nothing was found. We are both very desperate at this apparent loss but because something similar happened with an Iomega zip disk.

View 14 Replies View Related

Software :: Obtain An Older Copy Of KMM To Retrieve The Data?

Sep 17, 2010

I was using 9.10 Ubuntu and was going to update to 10.??. Being an intelligent person, I made four (4) backups of KMyMoney on different diskettes and thumb drives. Now, the problem, after reinstalling my O/S (new version) I reinstalled KMyMoney and found out that the newer version of KMM will not read the data I have backed up.What I need is a way to obtain an older copy of KMM so I can retrieve my data. Then I can update.

View 2 Replies View Related

General :: Retrieve Windows Data From Hard Disk

Sep 29, 2010

I have 2 hard disks and all together I created 6 partion in it.On primary I installed Windows XP and REST 5 partions were having data.From Second hard disk ,I copied all the first partion data to another partions and installed Red Hat 7.It took only 3 GB all togethr for Linux Distribution.Now I need to fetch my Windows data back.I logged from the Windows XP disk and I could see the second disk through disk managemnt .But it was showing "Unhelathy".But I will not be able to retrive the data.So can Anyone give soln for this.

View 2 Replies View Related

Server :: Retrieve MySQL Data From Command Line?

Aug 17, 2011

My computer has broken and I cannot login. I don't know what caused it.

I am using Fedora 14 and so it is easy to retrieve my files with the Fedora 14 installation disk under the 'restore' option. I cannot however, work out how to retrieve my MySQL data.

Would anyone be able to shed some light on this matter?

View 1 Replies View Related

CentOS 5 :: Sound-juicer Does Not Retrieve Track Data?

May 19, 2011

I have a fully up-to-dateCentOS 5.6. As of some very recent package update (later than May 12), sound-juicer is unable to retrieve track data for any disc; it just reports "Unknown Title" and "Unknown Artist".

Unfortunately I do not know how to tell which particular package it was, or even how to get a list of recently-updated packages.

Tracks are still extracted fine, it's just the musicbrainz connection which is doa.

I'd be happy to try an alternative program with musicbrainz capability, but couldn't find any. The installed k3b doesn't have any ripping options in the tools menu, where I gather it's supposed to be.

View 6 Replies View Related

Ubuntu Servers :: Set The Default Files Created By Www-data To 774

Jul 22, 2010

I am trying to set the default files created by www-data to 774 (umask of 003).

I go to

Code:
/etc/apache2/envvars

and have set these parameters. NOTE: The only thing I actually changed was adding the umask 003 at the end.

Code:
# envvars - default environment variables for apache2ctl
# Since there is no sane way to get the parsed apache2 config in scripts, some
# settings are defined via environment variables and then used in apache2ctl,
# /etc/init.d/apache2, /etc/logrotate.d/apache2, etc.

[Code]....

View 8 Replies View Related

Fedora :: Logger Pro - Retrieve Data From Scientific Calculators / Instruments?

Oct 5, 2010

(Logger pro is an app to retrieve data from scientific calculators/ instruments) I've always wanted to ask this question so here it goes... Has anyone gotten Logger pro (Linux beta) to work w/ Fedora? I have tried alien the two .deb packages to .rpm's so it becomes installable.. The installation seems fine, But the app doesn't run (I think it was like segmentation fault or something... I don't remember) anyways.. this is not absolutely important. I'm just wondering if this may be a problem w/ my install.

View 4 Replies View Related

Hardware :: Retrieve Data From Old Wide-plug Hard Drives?

Jul 8, 2011

Is there a way? My computer has a newer, narrow-plug hard-drive. Not Linux specific, I know, but I'm in a bind.

EDIT: Picked up an I/O Magic 2.5 inch IDE/SATA enclosure.

View 2 Replies View Related

Software :: Use Wget To Retrieve Some Data From Tape Backup Utility?

Sep 30, 2010

I'm trying to use wget to retrieve some data from our tape backup utility (HP Command View 1/8 G2 Autoloader). The URL requires two parameters for the info I want to retrieve. I have searched for a few hours and have tried numerous combinations to get the data but the parameters aren't being executed. I have escaped the URL as well.

Code:

wget --user=x --password=x --recursive --no-clobber --page-requisites --html-extension --convert-links --no-parent -O ssi.html "10.0.x.x/inventory_status.ssi?mag_0=1&mag_1=1"

returns:

Code:

<HTML><HEAD><TITLE></TITLE></HEAD><BODY>
<SCRIPT LANGUAGE="javascript">
top.location.href='logout.ssi';

[code]....

View 3 Replies View Related

General :: Recover Data From Encrypted Partition (created By EXT3 Ubuntu 10.04)?

Oct 11, 2010

I am facing a serious problem.I installed UBUNTU 10.04 and encrypted it during installation. I accidentally erased some of the necessary files from root folder. now the the OS is NOT booting.luckily i still have the encryption key i have some important documents in that drive (desktop folder).

PS: I have tried to run Live Ubuntu it shows the Root, but it does not enter any of the folder.

View 14 Replies View Related

General :: Files (system & User) Created After Login To System In RHEL 5.0?

Jun 4, 2010

How to find, what are the files (system & user) created after login to the system in RHEL 5.0?
Any single command available?

View 1 Replies View Related

Server :: MySQL Error 134 From Storage Engine Query: Select Data, Created, Headers?

Mar 1, 2011

I need help about the error in my website. I have the following error....

Code:
user warning: Got error 134 from storage engine query: SELECT data, created, headers, expire, serialized FROM cache WHERE cid = 'theme_registry:database1' in /var/www/html/web/includes/cache.inc on line 26.

View 2 Replies View Related

Ubuntu :: Moved Data To A Pc With Windows XP - Created File Is Named With A "~" At The End

Mar 11, 2010

So I just recently moves a lot of data from ubuntu to a pc with windows XP. I do a lot of html editing and I noticed, for many of the HTML documents I have, a duplicate was created that is named with a "~" at the end.
What are these files? Is it safe for me to delete them?

View 1 Replies View Related

Ubuntu :: Where To See When Files And Folders Were Created On System?

Jan 18, 2010

I can't figure out where to see when files and folders where created on the system. All I can see in Gnome and the terminal is the modification time. I also want to see the last access time.

View 2 Replies View Related

General :: Need Command To Figure Out System A File Was Created On

Jan 31, 2010

I am just starting out in LINUX and I know the basic commands but I am a having a problem. I scoped the man pages but I can't get it. Maybe one of know... Can anyone tell me the cmd to figure out the system a file was created on? I just can't figure out this problem.

View 6 Replies View Related

OpenSUSE :: Created A Tab To Look That The Physical Memory In The System? Monitor Program?

May 11, 2010

I have a system with 1 GB RAM. I'm running KDE 4. I created a tab to look that the Physical Memory in the System Monitor program, which I assume appears to look at the same stats that "top" looks at. In that Physical Memory tab I have 3 tables: Used Memory, Free Memory, and Application Memory.The Used Memory table shows that the system is using .94 of .98 GiBytes. The Free Memory table shows that the system has .5 GiBytes of RAM free.

However the Application Memory shows that only 339 M-Bytes of RAM is being used.Note that "top" shows the same info.So where is the other .6 GiBytes of RAM that the Used Memory table shows as being used?If I look at the process table which is supposed to encompass all of the processes running, including the ones for the OS, then it appears to add up to the 339 M-Bytes being used in the Application Memory table. Is the rest of the memory being held in reserve by the OS to be used as needed? If so, then why when another application is opened the Free Memory goes down instead of staying constant?I also noticed this memory "black hole" when I was running 11.0 on a system with 4 GB of RAM. The OS appeared to "take up" a large chunk of memory that was NOT being used by any applications and making it "disappear" - meaning that the applications were using about 1.3 GiBytes of RAM and Free Memory was showing only .7 GiBytes instead of the over 2 GB of RAM that should be free.

View 2 Replies View Related

Software :: Skype Icon Not Created In System Tray (taskbar)?

Jan 17, 2011

I'm running Kubuntu Meerkat. If I set skype to start minimized automatically, it seems that it's running but there's no way to get to it. It shows up in the process list but there's no icon for it in the taskbar or anywhere else on the screen. Even worse, I can't just kill and restart it; if I kill it, it just comes back. If I issue the skype command from the K menu or from a command line, I get a complaint that another instance is already running.

View 2 Replies View Related

General :: How To Update Newly Created Partion In RHEL6 Without Rebooting System?

Apr 17, 2011

How to update newly created partion in RHEL6 without rebooting the system?partprobe /dev/sdaN...does not work here in RHEL6, however it did work in RHEL 5.

View 2 Replies View Related

Debian :: Which Default File System Will Be Created On Usb Stick Using Live-helper Usb-hdd Image?

Feb 5, 2011

which default file system will be created on usb stick using live-helper usb-hdd image?

View 1 Replies View Related

Programming :: Detecting Newly Created Folders / Files On Local File System?

Apr 16, 2010

Using C++, I want to process sub-folders on my home folder sequentially each with a special naming format and containing some binary files in it:

Code:
1/
2/
3/
4/
5/
6/
...

Give above folders, I will process files in 1/ at first, 2/ at second, 3/ at third, and so on.

For some n/ folder, if I realize that n/ actually does not exist in local file system, I do not want to wait for it. Hence I will keep processing (n+1)/ folder, and so on.

However, when processing some (n+m)/ folder, previously not processed n/ folder may have been created on local file system. In this case, I do not want to miss processing it, but somehow detect its creation and process it. After processing n/ folder, I want to continue from (n+m+1)/.

View 5 Replies View Related

Programming :: Send Some Data From A System To A Windows System And Vice Versa?

Mar 4, 2010

How can I do some socket programming using which I can send some data from a linux system to a windows system and vice versa. Can we do that using the IO:Socket:INET perl module??

View 10 Replies View Related

General :: Retrieve The File Which Got Removed From File System Using Rm Command?

Nov 23, 2010

As in windows all the delted items will got to RecycleBin is there any such thing in linux.

(Or)

Can we retrive the file which got removed from file system(using rm command)

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved