As in windows all the delted items will got to RecycleBin is there any such thing in linux.
(Or)
Can we retrive the file which got removed from file system(using rm command)
By mistake i deleted imp folder which as certain imp files created, so i want to reterive it ? is it possible by using any specific linux commands only
View 4 Replies View RelatedHow can I retrieve the file in LINUX which I have deleted using 'rm' command .???
View 1 Replies View RelatedMy .jar file needs and uses some files in the same directory it's in (everything, including the jar was unzipped into said directory). It runs perfectly when I do java -jar file.jar in the command line, but there's trouble when I double-click the file when running from the file system manager. I've tried a custom command under properties ie java -jar, but the problem is that the .jar file doesn't seem to be able to use any of the files in the same directory. When running, the jar can't find any of the files that it needs.
View 5 Replies View Relatedi have generated .exe file from C file (ie filename.c ) after compiling in linux machine with -O option. I wish to know about how to run that .exe file when linux system starts up ?
View 3 Replies View RelatedI am just starting out in LINUX and I know the basic commands but I am a having a problem. I scoped the man pages but I can't get it. Maybe one of know... Can anyone tell me the cmd to figure out the system a file was created on? I just can't figure out this problem.
View 6 Replies View RelatedThis is gaurav. I have lost/override the old configuration (config file) while compiling the new kernel resulting in my internet connection failure. I have tried re-booting the pc, the only escape (somewhat weired) i would thought of, still it does not restore the original.
View 4 Replies View RelatedDoes the dump command back up entire file-systems or is it capable of backing up subsets of a file-system? And is tar capable of taking device names (for file systems) as input to be archived?
View 1 Replies View RelatedBy accident, I used rm on a file I didn't want to delete. Is there any way that I can get it back under Linux?
View 4 Replies View RelatedHow can I create a multipart 7zip file in Linux using the p7zip console client?
Many people referred me to it. My console app is
7-Zip [64] 9.13 beta Copyright (c) 1999-2010 Igor Pavlov 2010-04-15
p7zip Version 9.13 (locale=C,Utf16=off,HugeFiles=on,4 CPUs)
The output of my fdisk command is as follows :-zodiac@gml-admin:~$ sudo fdisk -l[sudo] password for zodiac: Disk /dev/sda: 160.0 GB, 160041885696 bytes255 heads, 63sectors/track, 19457 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe30ce30c
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1958 15727603+ 7 HPFS/NTFS
/dev/sda2 1959 4752 22437838 f W95 Ext'd (LBA)
[code]...
I have accidentally removed my apache2 startup file /etc/init.d/apache2 using rm /etc/init.d/apache2 command.
How can I get that back?
Consider the following:
mount | grep home
type reiserfs
rm -Rf /home/user/over_9000_little_and_big_super_secret_files/
# oops, I should have shredded it instead.
How can I properly and securely "initialize free space" to ensure that no additional info can be restored restored by digging in free space (Preferrably without stopping or disturbing the filesystem much.) Is dd if=/dev/frandom of=/home/qqqqq really secure for this (tails, journal, etc.)?
As a strategy for learning linux I have decided to adopt using a lean windows based approach. I want to focus on command line machine system, network basics, and file management knowledge. In other words find out how desktop manager does it's business, so I know how to master my machine, but by and large once I have made my choices, leave it alone to do just that.
I figure I should know how applications are internally configured etc., but I also figure an apps GUI and config choices should take care of installations, and program usage as in M$ windows. Surely taking care of an applications dependencies are the responsibility of the developer, are they not?
I am working my way through "Rute User's Tutorial and Exposition (Version 1.0.0)" right now for an overall viewpoint. Can anyone suggest a specific source for a point by point explanation of the command basis of a generalised "desktop management" application (KDE,LXDE)? Better yet would be if it had some parallel comparison of the varied approaches taken by different distributions of linux.
A secondary question, is that allowed? Up to a certain point in Ms windows, a thorough knowledge of DOS 6.xx would theoreticaly enable one to more or less duplicate the actions of the windows overlay. Is there a basic distribution (or subset in all of them maybe?) of linux that would be consistent with that paradigm? What would be analogous to DOS batch files, or GM-Basic? Oh! that's 3.I am certainly appreciating the depth of this forum, and the breadth of knowledge among you forumite's. Reading it is time well spent.
I need to be able to convert HTML email messages saved as text files (.eml or .msg) to PDF documents, one PDF per email, retaining formatting and images.
Are there any Linux tools that will allow me to do this from the command line (so it can be scripted)?
I work for a company that makes portable devices running Linux and I was recently asked to make the underlying file system read-only for "security" purposes. Since the distribution is based on LinuxFromScratch, I know that very little writing happens at run time. So, even if the device runs on a usb flash device, I doubt that putting the root file system RO will be that beneficial. I am actually more concerned about a process actually breaking because it cannot open a file in RW mode than a process going rogue and filling the root file system with log files, etc. I'd really like to ear what kind of advantages disadvantages there really is with read-only file-systems.
View 6 Replies View Relatedmy partitioning layout was as follows
Vista Recovery
Windows 7
GRUB
Extended
-->Fedora 12 (ext4)
so, I shrunk my recovery in Windows 7 successfully, and booted into my Fedora 12 live cd to run Gparted, and move the partitions so that the free space could go towards fedora, I did such, and then I couldn't expand the partition to my dismay. Next, I woke up this morning, tried to boot to fedora to run SSH, grub loaded, but when I tried to boot fedora, I got the "File system check failed" error, and when I tried 7, it just went to a blank screen with a single "_" in the top left-hand corner.
I have an ntfs partition that I wish to access as a normal user(non-root). For this I did the following. As root I created a folder /windows and did a chmod 777 -R on /windows. Then I added the following line to /etc/fstab
Code:
/dev/sda3 /windows ntfs-3g defaults,nosuid,nodev,umask=000 1 0
Now, the partition is mounted alright but the problem is that when any other user (non-root) creates a files in /windows (say by executing touch newfile) the newly created file has the owner and group set as root. The non-root user can create the file and he can also delete the file, however, he cannot change the permissions of the file and also the owner:group is always set as root:root. How do I get across this problem, i.e. how do I mount a partition, so that a non-root user can also change the permissions and ownerships of the files he creates.
I used the ext3 format when I formatted my partition prior to installing Ubuntu10.10. I had accidentally deleted a file and began the process to get it back. It wasn't critical but helpful to recover the file. To make a long story short I ran into to some unexpected road blocks. I tried to use PhotoRec to get the job done but with no success.
I'm just looking down the road in the event I might have to recover something important.If it would be better going back to the Fat32 file system I would rather do it sooner than later. Just as a side note I am dual booting between linux and windows.
I'm a little bit confused with partitioning the filesystem in Linux. the difference between creating the file system with fdisk and mkfs (when formatting the disk). I can't clearly tell my problem, so please look at this picture:
View 2 Replies View RelatedI use this command for make image file :
Code:
#dd if=/dev/zero of=disk.img seek=2G count=1
and use this command for check file size :
[code]...
I bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.
"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"
Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).
My Redhat Enterprise Linux 4 with 6x partitions (/, /boot,/home, /usr, /var, /tmp) of 6.0 GB IDE Hardisk was working quite fine. I decided to create LVM on /home and /var partitions but due to some errors occured and I delete the /home partitions. That's why partition table altered. I then delete 4,5,and 6th partitions (/home, /var, /tmp) partitions and now try to create one by one but following error is coming:-
[Code]....
The Super block could not be read or do not describe a clear ext2 file system. E2fsck b 8193 <device> I have tried following commands,but could not successful:- e2fsck -p /dev/hda7 (where hda7 was created but afterthat it was deleted) e2fsck -a /dev/hda7
I followed this tutorial exactly:When I rebooted, I tried to log in but was redirected to the login screen every time.I removed the file that it said to create, but still can't log in.
View 2 Replies View RelatedHave just assembled a new computer and thought I would install the 64 bit version of openSUSE 11.2 in a "Windows free zone". After a hiccup or two I have managed to get a system of sorts running but on trying to copy files from my old computer(via a memory stick) it tells me that Vfat is an unknown file system.On my old computer I am running 32 bit openSUSE 11.2 as a dual boot system with Windows XP and have no problems moving files between the two different file systems.Is it possible to get a 64 bit file system to read 32 bit file system drives and if so how do I do it?
View 7 Replies View RelatedI'd like to know which command i should run from the terminal to know which file system (ext3, ext4, etc...) my Ubuntu runs on.
View 2 Replies View RelatedI download some movies those are with 'mkv' , but couldn't be played, I tried other players , like mplayer , dragon , xine, even swich OS to windows , didn't work . not all of those files , but some of them. one of them named 'the.other.man', 2GB.I opened a terminal and executed "file the.other.man.mkv "utput is "data", and command 'strings the.other.man.mkv", output like as follow:
T5}.
S!e
I|
[code]...
I work for a company that builds computers for military applications. We have a unit that is using Redhat Enterprise Linux Server using a CF Card for the HDD. The CF Cards were prepared for us by the customer. We just got them in however, upon testing it will start to boot but it looks for a serial ID plug which we do not have, so when it does not find it, the TERM signal is sent and it shuts down. so we emailed them for instructions on how to get around that. they told us to remove a certain file using the rm command.
The only problem is that we still cannot get redhat to boot, therfore I cannot get to the linux terminal to even use the rm command.
Is there any way I can rm <file> in the GRUB or any other way?
FYI I am not very familiar with linux but I do have a decennt understanding of general programming/scripting.
I am using openSUSE 10.3.When I install software from tarball then to record time required I send output of date to beg.txt(when installation begins) and end.txt (when installation finishes).How can I append output of date to a file so I don't need two files?
View 4 Replies View RelatedI am trying to execute command mactime in order to control changes made to the file system, but I am getting an error. I am running the shell as root, and it is the first time I run the command in this system - Debian Squeeze up to date. The I/O is as follows:
# mactime 3/1/2011
cannot exec /bin/date: No such file or directory
cannot exec /bin/hostname: No such file or directory
cannot exec /bin/uname -n: No such file or directory
Cannot open /var/cache/tct/data/Amnesiac/body: No such file or directory
The first three lines of output are the ones that are worrying at the moment; I am not concerned with the last. Although error messages suggest the programs date, hostname and uname do not exist in /bin directory, they are available as shown by
[Code]...
