I have apache2 on my system, and it stopped working since the router was messed with (not by me). I removed apache2 and deleted /etc/apache2, but if I install apache2 it doesn't bring the files back. How do I fix everything that I messed up so it's as if apache was never installed so I can install it again?
View 2 RepliesFirst problem:
apt-get --purge remove ubuntu-desktop
Reading package lists...
Building dependency tree...
Reading state information...
Package ubuntu-desktop is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
I have installed Ubuntu desktop on Ubuntu Server to get Boinc manager running. Now I want to remove Ubuntu-desktop.
Second Problem: /etc/init.d/xorg start : No such file or directory When the server boots i get a blinking cursor.
I am using Ubuntu Maverick and I wanted to try the xubuntu desktop environment, so I installed xubuntu-desktop package from synaptic package manager. There were many programs automatically installed with the xubuntu-desktop.After trying the xubuntu desktop, I didn't like it and removed it from synaptic package manager but it didn't remove the programs which were automatically installed with it.Is there any way to remove those programs without having to remove them one by one?
View 3 Replies View RelatedI recently started an installation of Debian Lenny. During the install, I accidentally chose to install "Desktop environment" when I meant to de-select it (I hit enter, which was obviously the wrong key to de-select) so what should I do now? Should I restart the install, and be more careful the next time the task selector comes up? Should I let it continue, and uninstall all the X stuff afterwards (and how would I remove ALL of the stuff installed with the "Desktop environment", 10GB hard drive
View 3 Replies View RelatedI am trying change the MaxClients parameter for apache2 on ubuntu. I looked in apache2.conf and there are two instances where MaxClients is mentioned.
<IfModule mpm_prefork_module>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
[Code]....
I can't get PHP to work properly with my apache2 server. I've tried adding this to the empty httpd.conf file:
Code:
AddType application/x-httpd-php .php3 .php
AddType application/x-httpd-php-source .phps
but that didn't work. Also, there are no apparent php related files in /etc/apache2/mods-enabled
I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........
I have set up a server with Ubuntu 10.4. It always worked fine with 32-bit inside VMware. But on the production machine with 64-bit, it wasn't working well by now. I could now reliably trace the problem down to the "ubuntu-desktop" package. I have installed it (without the recommends) so all its depends are also installed. But as soon as that package is on the system, it freezes at boot time, on the page where CPU freq modules or AppArmor stuff is started. My server is an Intel Core i7, so it lists 8 CPUs for cpufreq. They're normally all listed in a line on their own, but when the system freezes here, the output is broken already. Sometimes it says that cupsd is started, or "Checking quotas", sometimes it stops after "CPU4", sometimes it prints out the lines "CPU0" to "CPU4", then "CPU7" in the same line followed by "[OK]". The system won't react on anything from then on except a hard reset.
As soon as I remove the package "ubuntu-desktop" (chrooted into the system from the rescue system), the OS on disk boots normally into the GUI logon. No problem at all anymore.
It took me a few days to figure out why it wasn't working. I first suspected quota, then a kernel upgrade. But the system booted well after each change on their own. Just as I installed all the graphical stuff, it stopped booting.
What's happening there? What am I supposed to to now? I need the desktop environment and the machine must be working by Saturday. Although the description of ubuntu-desktop says that I should not uninstall it because it's used for update management, I could now install it to get all its depends, and then immediately uninstall it to make the system boot up again. Is that a good idea? Shouldn't it be working without such hacks?
Is there a way in SuSE 11.1 to have the conventional desktop, instead the plasma desktop? I thought that installing KDE 3.5 will fix it, but I was wrong. I really don't want to download back SuSE 11.0, just to have my old desktop layout. SuSE developers should at least leave it as an option than to force people to install it
View 2 Replies View RelatedI want to password protect say a subdirectory, or a subdomain via vhost, with a username/password, but use the systems users and passwords as logins -> I want go avoid any and all .htaccess... as everyone should be doing anyway How would I go about doing this? I know my way around the apache configs fairly well, so I'm not a total newb -> I now I can use .useraccess and .pwaccess but that's flat file driven, not based off of the systems users/passwords.
View 1 Replies View RelatedI'm doing a custom version of mod_musicindex, but can't get the cache to write like it's supposed to.example cache file: /tmp/testing/cacheNow, normally I think setting the dir testing and file cache to www-data:www-data would be enough. Permission denied. I tried 666 as well, figuring why not. Permission denied.777 works, but thats pretty far out there...Am I using the wrong user/group? I figured apache modules would run as apache.Do I need to use 777? 700 or 744 don't work, which is making me think it's not running as apache...
View 2 Replies View RelatedI just installed Fedora 15 with the gnome desktop which looks like the android system for mobile phones, I installed wine which put the icons on my desktop but whenever I install a windows app it doesn't put an icon on my desktop for that particular application. How would I add an icon for those window apps so I can lunch them from the desktop, I don't know if you call that the desktop or just the program luncher either way how do I put an icon there so I can run those windows apps from there?
View 4 Replies View RelatedI have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
View 9 Replies View RelatedI am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
I searched for a hex editor in the USC, and chose to install a package called okteta. Only problem is...(I didn't realize until after it was too late to cancel)...it's a KDE package.Since it was probably one of the first (only?) KDE based app on this fresh Lucid installation, I believe about 115 (!) packages (see the list below) were installed in addition to the one I wanted. Grrrr.I then went into synaptic and removed okteta, but as I should have known, it did not remove any of the dependencies.I then looked at the dpkg logfile to see what had been installed. Here's what I found:Quote:
2010-05-18 02:27:56 install libqtcore4 <none> 4:4.6.2-0ubuntu5
2010-05-18 02:27:58 install libattica0 <none> 0.1.3-0ubuntu1
2010-05-18 02:27:58 install libqt4-network <none> 4:4.6.2-0ubuntu5
[code]....
I attempted to install the CLI management tool for my Highpoint Rocket Raid card (rr62x) downloaded from this page: [URL] When I tried installing it, this is what happens:
Code:
# dpkg -i hptraidconf_3.5_amd64.deb
Selecting previously deselected package hptraidconf.
(Reading database ... 68853 files and directories currently installed.)
[code]....
How can I get this package removed? I was able to get a different management tool installed to configure my RAID so I don't need this one. My system appears to be working, but everytime I use apt-get to install something else, it shows the hptraidconf package as failed.
We all know that we can remove installed applications straight from terminal or ubuntu software center. However, sometimes we download .deb files from the web that are not necessarily on the repository. My question is, how do I uninstall a manually installed deb application?
View 9 Replies View RelatedRunning 10.10 64bit
I tried installing the latest Mupen64Plus from source, and something went wrong, and now I get errors when trying to run it. How do I remove the link that was created from the source install?
This is what I get code...
I had a dual boot system (Ubuntu 10.04 and XP) and had a problem with my XP and had to reinstall it. Unfortunately I forgot to backup the boot file. After the re-installation of XP, I can't load Ubuntu 10.04 anymore, so I booted up Ubuntu 10.10 using USB, during the install, it didn't give an option to do a repair, so I did an install along with other OS. After the install, the GRUB showed now 3 OS:
Ubuntu 10.10
Win XP
Ubuntu 10.04
How can I remove the newly installed Ubuntu 10.10 without damaging the other OS? I'd like to keep the 10.04 because it's all customized and have several apps already installed.
I need to know how to repair ubuntu. I don't want to reinstall it. I want current version keep working. Is it possible?
I know that i need to remove recently installed program but how can i do that if ubuntu doesn't start. Even in recovery mode.
I found that "ask search engine" installed as default web search engine instead of google in firefox. Now it's impossible to go back to google search engine as "ask" always remains as default search and no other search engins are shown in the firefox list.Any idea about how to get rid of "ask"? I managed to install another "unofficial google" search plugin but if i click on restore default search engine "ask" will be restored.
View 9 Replies View Relatedmy 10.10 installation is configured with my favourite settings. will an upgrade to 11.04 remove the softwares installed? i have also made some changes to grub file. will all these be reset after upgrade?
View 3 Replies View RelatedI would like to know if I can delete all of my files and remove all programs from my ubuntu laptop, like a clean install but without having to install the drivers and going through the installation
View 6 Replies View RelatedCurrently i am working in nagios and i have installed check_mysql_health plugin in the nagios monitoring server and after installing this plugin, i removed the MySQL in my system and installed another version of MySQL and now also my plugin is showing the error as
[root@wipro libexec]# ./check_mysql_health --hostname wipro --username root --password root123 --mode connection-time
CRITICAL - cannot connect to information_schema. install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: . /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5
[code]....
I have MySQL 5.0.8 in my machine. how to remove the installed plugin.
I just installed fastCGI with this guide is quite short and now i want to undo all that changes.. can some one guide me with the steps to do it?
This is the install:
So far i leave this file empty so the module is not loaded.. bou i like to remove it completely from my system
Since I plugged in and then unplugged in the firewire port a video camera, I have a note in the bottom-right corner of one of the desktops. It says 'libieee1284-3".
It's not a serious problem at all, I can live with it, but if there was a way to remove this yellow square from my pretty desktop I would like to hear about it .
I tried clicking and right clicking on it; it does nothing except I can access a tiny menu with - apparently - enlarge, refresh and configure buttons. Only the configure button (a spanner) does something, it opens a "configure" box which does not have a "remove" or "delete" option. Rebooting does not remove it.
How can I access files of my Windows desktop from Ubuntu desktop while using Ubuntu?
View 3 Replies View RelatedI am trying to connect an Ubuntu 10.04 desktop system wirelessly to another desktop that is directly connected to a cable modem via dlink wireless router and ethernet card. I have not been able to connect on the second system (Ubuntu) to the wireless router.
View 9 Replies View RelatedAfter updating to Karmic, Synaptic shows almost all of my installed packages in the category "Installed (manual)", including about half of the packages that belong to a clean Ubuntu installation (e.g. apparmor, apt and hundreds of others). As a result, I can't easily get a list of those packages that I did indeed install manually and may want to remove. Is there a way of removing the "Installed (manual)" flag from all packages?
If I could do this, all packages that do not belong to the core Ubuntu system should show up as "Installed (auto removable)" and I could individually mark only those as manually installed that I really still need and let apt/synaptic uninstall everything else. I know that with today's hard disks, disk usage of installed packages is not an issue. But those packages accumulate over time and need to be updated with every security update and every ubuntu dist-upgrade, wasting time and bandwidth.
as much as i am one for saving space and throwing out the trash. now my problem is the fact that I DO NOT WANT THIS program (localepurge) running on my system. i look and did everything i could. note : i am a noobie. when i config the program from the start i told it NO don't delete anything. and now that i have done some reading i do not want it working period. i could not find a way to disable or uninstall localepurge.
View 4 Replies View Related