Running 10.10. My graphics card has just blown up so I've had to switch to the motherboard internal graphics. Problem is, Ubuntu doesn't like it - I have to start in recovery mode and 'low graphics for this sesion'. How do I remove all 'knowledge' of Nvidia and then let Ubuntu configure itself for my new(!) graphics capability?
View 1 RepliesI setup a dual boot system, with approximately 200gig planned for ubuntu 10.10. Based on the article here:[URL]..And this quote:
Quote:
# sda1 Recovery Partition, unchanged
# sda2 Windows partition, shrunk preferably from inside Windows, hopefully about 30Gb
# sda3 Primary Partition, 10Gb, file-system = ext3, in the Partitioning Section of the installer change the "Mount Point" = /
[Code]...
I assumed at that point that the "sda3" "/" would be for booting purposes. I would have to guess that I was wrong, because it is filling up very quickly. As you may be able to tell by the screen shot, "sda5", "/home" was what was assumed to be the file structure to store all of the programs and such.
I have only been running this setup for a week, and would expect to not be seeing my "boot" partition growing so quickly. Do I need to resize it? here do the standard programs that I get from the ubuntu software center install at (partition wise)? I suppose I dont mind wiping that section dry and starting over, but I would give a resize a try if possible.
nothing informative from me as of now, although I have only been out of "Windows" for a little less than a day, I suppose the only alternative conversation topic is a simple request for those more experienced users to point out some major/musts about topics to focus on as I'm new to open source ANYTHING, really
To think I was so "under the gun" about spending loads of cash to keep up with the IT group of choice, I have gained some much needed relaxation w/my cup a tea. Pinpointed request, I guess, "when you first started, and knowing what you can do with it now, would you be obliged to say 'HEY, THIS IS THIS, BUT WATCH OUT FOR THIS'
I'm currently trying to find ways to get in-depth knowledge of the Linux OS. To give a brief overview of where I am at right now, I am a computational science graduate student who does all of his work on *nix scientific clusters.I also took a lot of computer engineering and computer science courses in college, as well as being the stereotypical standard computer nerd growing up, so I'm somewhat familiar with computer architecture, though more from the hardware side.So I'm familiar (though I wouldn't claim to be an expert quite yet, by any means) with using Linux and C programming, and I have a basic grasp of generic computer architecture, but what I feel I really lack knowledge in is the specific details of the Linux. All the details of the boot process, exactly what the kernel does, how Linux handles memory management, etc. I'm having difficulty finding any information on this;all I can find is generic information targeted towards people who are just starting out, and the stuff I've found that talks about the kernel seems more oriented towards "you change setting X and Y happens" rather than what the kernel is doing.
View 7 Replies View RelatedIs there any Full form of LINUX ?
View 4 Replies View RelatedI've already Googled this problem, and it seems that the only solution is running:
Code:
nvidia-settings -a InitialPixmapPlacement=2 -a GlyphCache=1
in the terminal. However, this barely helped me.
I've heard it's a problem Docky has with nVidia drivers, which I use.
Does anyone have a solution? Docky is so slow it is essentially unusable at this point. Cairo dock seems too glitchy, so I guess it's back to AWN.
Data flow has become nowadays really huge. Although how hard one can try to tide folders, hard-disk, it can always be some days you are looking for something. What could be interesting to make available, e.g. to install for users, on all Debian stations. In some universities, with Linux-machines network, it is often kind of obliged to use emacs and 'office' KDE applications, as a standard at first.
for organizing better, what could be the solution as 'data flow organizer'? Many solutions, many methods, many ways are offered but none will be perfect
I have this broken package nvidia-kernel-common, I don't have Nvidia HW andI'm using ATI.
I tried to remove/purge/install this package since I saw it was broken but without any help.
This is the output that I have:
Quote:
sudo apt-get remove nvidia-kernel-common
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
I cannot find the correct command to uninstall the Nvidia blob, can anyone point me to the right one that removes the latest drivers?
View 1 Replies View RelatedAfter having tried to fix the plymouth without any successfully result (i am meanning the thread i began few weeks ago and sited here: [URL]. I decided to keep nvidia's privates drives on giving up any hope to fix the plymouth bug and, right now, i would like to optimize or configurate the drivers properly like it is on Mandriva One 2010.
Perhaps someone is not exactly understand what i want to say. Well, i was using Mandriva One 2010 before installing Ubuntu Maverick and i have noticed there was no a low latency, lag effect, low performance or a lack of initial smooth and clean windows moves in Mandriva One 2010 but on Ubuntu there is.
This is very hard to explain for me, for example, If i use the "flip windows selector" (i mean, pressing "<Super>+Tab" keys) show me this effect too slow initially but if i forced the GPU for a while (repeating and pressing the keys), the lag effects vanished and then, the flip windows selector works nicely fast, clean and smooth. Now if i stop to use that effects, let the Nvidia GPU repose a while and use again the flip windows selector again, the lag effects come up again.
This fact does not just happen using the "flip windows selectos", any effects which minimize, resize or maxime the windows generate that annoying initial lag effects, for example, a simple minimize windows:
I am in despair with this, i do not if i have to do some change in the /etc/X11/xorg.conf file, what i have to configurate in the "Nvidia X server Settings" or in the "compiz manager settings" application.
Anyone knows a tutorial about how to optimize the Nvidia drivers on Ubuntu? or the Compiz effects to reduce the lag effets?
i run debian squeeze, and i followed this guide, using m-a. But, when i try to install the nvidia-glxReading package listsBuilding dependency tree..g state information...The following packages were automatically installed and are no longer required:
libnautilus-extension1 gnome-mount
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
[code]....
As a strategy for learning linux I have decided to adopt using a lean windows based approach. I want to focus on command line machine system, network basics, and file management knowledge. In other words find out how desktop manager does it's business, so I know how to master my machine, but by and large once I have made my choices, leave it alone to do just that.
I figure I should know how applications are internally configured etc., but I also figure an apps GUI and config choices should take care of installations, and program usage as in M$ windows. Surely taking care of an applications dependencies are the responsibility of the developer, are they not?
I am working my way through "Rute User's Tutorial and Exposition (Version 1.0.0)" right now for an overall viewpoint. Can anyone suggest a specific source for a point by point explanation of the command basis of a generalised "desktop management" application (KDE,LXDE)? Better yet would be if it had some parallel comparison of the varied approaches taken by different distributions of linux.
A secondary question, is that allowed? Up to a certain point in Ms windows, a thorough knowledge of DOS 6.xx would theoreticaly enable one to more or less duplicate the actions of the windows overlay. Is there a basic distribution (or subset in all of them maybe?) of linux that would be consistent with that paradigm? What would be analogous to DOS batch files, or GM-Basic? Oh! that's 3.I am certainly appreciating the depth of this forum, and the breadth of knowledge among you forumite's. Reading it is time well spent.
I've only a small /boot sector and
rpm -qa | grep kernel
kernel-2.6.31.12-174.2.22.fc12.i686
kernel-PAE-devel-2.6.32.9-70.fc12.i686
kernel-PAE-2.6.32.9-70.fc12.i686
kernel-2.6.32.9-67.fc12.i686
abrt-addon-kerneloops-1.0.8-2.fc12.i686
I'm using the PAE kernels, need the devs for nvidia kernel building,can I remove all the non PAE kernels without damage please?
The driver has crashed X and before I had a chance to find RPMfusion instructions on dealing with initrd, I removed the package just to keep X running.Uninstalling the package does not restore kernel and Xorg operation. I am still in VESA mode.Although they claim they don't put stuff in non-standard places and use RPM, still there is something left over, as nuoveau driver no longer loads.Now that system configuration is all over the place, it is not clear what they actually changed or replaced.
View 3 Replies View RelatedIf you read /etc/passwd you find all sorts of entries with important sounding names: Before I get flamed about publishing this list, I chopped it up from a live-DVD copy of the contents.)
Code:
root:x:0:0:root
daemon:x:1:1:daemon
bin:x:2:2:bin
sys:x:3:3:sys
sync:x:4:65534:sync
games:x:5:60:games
man:x:6:12:man
lp:x:7:7:lp
[Code]...
Can do nothing with the PC. New install of 10.04 and was prompted to install Nvidia driver. Did so. Rebooted, now have nothing except a thin line at top of screen. How can I remove this driver when I see nothing?
View 2 Replies View RelatedI'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
I don't know if you have heard of Nvidia FREE Rendering program, called Nvidia Gelato.
I've logged on thw web, and tried to look it up on the web. I found the webpage, but all the download link's seem to be broken.
[url]
Does anyone know if this is happening for any reason? Am I missing something? If it is broken and there is no other solutionn, Can someone send me the Gelato 2.1 Rendering source for Ubuntu 9.10?
i am having a problem with my just recently upgraded ubuntu 10.10 ive search google and forums for well over 4 hours with no luck so im asking here. Now i know nvidia 96 has problems with xorg 1.9 but i installed the updated nvidia 96 driver that supports xorg 1.9 through maverick-proposed and i dont have nvidia control panel under system->preferences and if i types sudo nvidia-settings in terminal i get it says im not running an nvidia driver but the hardware driver reports it as activated but not in use and nvidia settings also tells me to run nvidia-xconfig but it says this when i do sudo: nvidia-xconfig: command not found
View 6 Replies View RelatedOnly about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
I have 9.10 running on an old computer with a Nvidia Vanta-graphics card. Unfortunately these appearently aren't supported by 9.10, since the oldest nvidia drivers in the repository for this build are nvidia-gfx-96, while vanta seem to supported up to nvidia-gfx-71. After some hours of following tutorials, fiddling around and testing I managed to install the 71-drivers. But, the nvidia-settings require nvidia-xconfig to be around, which is embedded with later driver-builds but not with 71.
Fortunately I found a tar.gz at this page, so I downloaded it... but -and here is finally my question- where am I supposed to extract it to and are there other things I should do to get it working? Or, if I'm overcomplicating things, feel free to give me directions on what to do. Unfortunately I couldn't find anything on Ubuntu 9.10 and nvidia-gfx-71, hence I'm messing around for hours by now.
I spent quite a lot of time jumping from one thread to another trying to fix a problem with my NVIDIA drivers in Lucid. I was getting the error message on startup: NVIDIA: Failed to load the NVIDIA kernel module ...Failed to load module "nvidia" (module-specific error, 0) No drivers available".
After a lot of trial and error, this is what worked for me (I have updated this thread following [URL]):
- Download the latest NVIDIA driver from www.nvidia.com/page/drivers.html
- In the terminal cd to the directory where you downloaded the driver package (e.g., $ cd Downloads)and make it executable (e.g., $ sudo chmod +x ./NVIDIA-Linux-x86_64-256.53.run)
- Edit blacklist.conf $ gksu gedit /etc/modprobe.d/blacklist.conf
and add the following lines to the end of the file:
#recommended by http://ubuntuforums.org/showthread.php?t=1467074
blacklist vga16fb
blacklist nouveau
blacklist rivafb
[Code].....
This has been bothering me for years now...when I go to remove a thumb drive from my computer, I have two options when I right click the device eject and safely remove. What on earth is the difference supposed to be?
View 3 Replies View RelatedI have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
View 5 Replies View RelatedI am the only user on my laptop so there are somethings that I don't need.I would like to remove the login at start. What do I remove to make it go away? Second one is Keyring. Is it necessary? Can I remove it without causing problems?
View 8 Replies View RelatedUsing online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
I can't find kmod so I'll go for the Nvidia installer from [URL]. I tried to run it Quote: su -c 'sh NVIDIA-Linux-x86-XYZ.AB.pkg1.run' but it wants me to kill xserver. How can I do that? " gdm stop" will kill Xserver too? How will I start it again?
View 3 Replies View RelatedThe freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,