Ubuntu :: Remote Desktop To Another Computer AFTER RESTART Using Vinagre?
Nov 7, 2010
I have a fresh install of Ubuntu 10.10 on a home server. I can connect to it using vinagre from another computer just fine. However, if I restart the server I can no longer vnc to it because I need to log in (start a gnome session). Is there a way to do this using just vinagre? Do I need to install another vnc server on my home server? The problem is that I don't want to carry a monitor from another room just so I can log in and start a gdm session if the home server gets restarted.
View 1 Replies
ADVERTISEMENT
Sep 23, 2010
I'm playing around with trying to access a Fedora 13 system from a Ubuntu 10.04 system. Both are relatively new vanilla installations.I went into System - Preferences - Remote Desktop on the Fedora system and enabled Remote Desktop. When I connect with the Ubuntu system (ssh), I can login, but all I see is an ssh terminal session. I was expecting the desktop environment (GNOME right?) to come up.
View 4 Replies
View Related
Feb 6, 2011
I maintain plain vanilla Ubuntu 10.04 systems for several friends. Each machine has only one user, the owner. I use Remote Desktop to instruct and to perform maintenance. Here's my problem:After updating the system, if the kernel has changed, a restart is needed. If I do a restart, I then have to phone the owner to insert his login credentials in the gdm login screen, before I can do anything else via Remote Desktop on that machine.There ought to be a simple way I can avoid the phone call and login myself.
I'd strongly prefer not to use any software that is not included in a plain vanilla Ubuntu 10.04 installation. And I don't want to weaken system security beyond what it is now.Is there a solution? Or, what is the simplest solution?
View 2 Replies
View Related
Oct 23, 2010
When trying to connect to another Ubuntu machine running remote desktop using vinagre, I get a black screen on the client machine. Annoyed, I went upstairs to check the host machine, and it is waiting for me to authenticate my keyring. Why would the host need to authenticate for me to access it remotely?
View 1 Replies
View Related
Sep 1, 2011
I'd like to set up remote desktop which I can access from any computer with a VNC client, without knowing the IP address in advance and without having access to the "server" at the time of access. I'm aware of the security risks, but there's nothing critical on the server computer, and I'll make sure I use a good password, so I'd still like to go ahead. Is this possible?
View 8 Replies
View Related
Apr 14, 2009
I have an ssh question that I have not been able to figure out.
I am sitting in front of computer A on computer B I would like to start mplayer and have it display a movie on computer B's screen. I think a better question might be how do I start a gui application and the Desktop on a remote computer threw ssh.
View 1 Replies
View Related
Feb 9, 2011
I have been trying to use the remote desktop so I can get my files and stuff from one computer and use it on another one, I have not been able to figure it out...
View 4 Replies
View Related
Mar 1, 2010
I have been trying (unsuccessfully) to remote access my girlfriend's Ubuntu machine to fix a few things. The problem is that she lives in Japan and I live in RI, USA! Is it even possible to ssh or Remote Desktop her computer with such a high ping rate? (average ping time is 300ms) If so why can I not connect?
View 2 Replies
View Related
Jun 28, 2011
My linux PC is connected at work and I was able to configure the IP to connect to the network. I need a way to access the linux computer from other windows PC in the office via shared folders and or remote desktop. I am stumbling upon "VNC" on google.
View 1 Replies
View Related
Feb 19, 2010
Running Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
View 1 Replies
View Related
Apr 30, 2010
I had this issue in 9.04, resolved it in 9.10 (it went away on its own), but it's back in 10.04..I currently run my Ubuntu machine as a headless server and connect to it using TightVNC from a Windows computer.However, this connection won't work unless I start the Ubuntu machine with a monitor connected. Once that's done, the remote connection works fine until the Ubuntu machine has to be restarted. Thankfully Linux doesn't need restarting as much as Windows does, but unfortunately, every time I restart (i.e. with a kernel update, which happened at least a half-dozen times with 9.10), I have to plug the monitor in or TightVNC won't be able to connect.
System - Control Centre - Remote Desktop is set to allow remote connections as it should, I haven't altered this on upgrade.It's like it's some sort of graphics issue - if no monitor is detected on startup, disable the GUI completely...the system runs fine in remote terminal mode over putty, it's serving files fine and running the few server apps I have on it, but nothing over TightVNC.
View 5 Replies
View Related
Jul 9, 2011
I've been trying to find a way to watch videos from my main desktop computer on another computer I've plugged into an HDTV. I'm such a Linux newbie that I decided to give Mythbuntu a try. It was way to complicated for what I needed, and I'm sure that some more experienced people reading my first two sentences laughed to themselves at my naivety.
What I am trying to find is simple: browsing one computer's home folder from another computer, and playing the videos therein. If there's anything like Mythvideo that requires less than half of the skill requirements, I will telepathically send love to the person that informs me of it.
View 2 Replies
View Related
Sep 30, 2010
i have a problem i cant access remote support on teamviewer but i have access to transfer file. is there a way to make a file and send it to restart the computer. or is there anyway i can restart the computer over the internet. i cant be physically be at that computer for another 1 week.
View 2 Replies
View Related
Oct 25, 2010
Have installed Ubuntu Lucid and I'm unable to restart the computer. Doesn't work using the power icon in the top right or using sudo reboot from the termial - I have to hit the reset button to get the computer going again. The problem is only related to restart - shutdown works as it should. When I try to reboot, the screen goes black aside from a narrow band of crimson on the far left of the screen; it freezes at that point. I've had a look through the var/log/messages and saw nothing that was an obvious problem, but then again it's not something I've ever had to look at before. Tried adding acpi=off as an option but that seemed to make no difference.
Not sure whether it's relevant, but specs are 3ghz Core 2 Duo; ATI 4850;4gb ram; Gigabyte motherboard with Intel p31 express chipset.
View 1 Replies
View Related
Mar 18, 2010
I'm working on getting my myth box hooked up to my Sony flat panel display.Originally the nvidia drivers could not read the EID, so defaulted to only 640x480 over my HDMI-DVI connection.I manually updated xorg.conf with a mode for the resolution I know the thing can handle. Suddenly there are several resolutions avaialble in nvidia-settings and it seems to be communicating with the TV, as it is now listed as a Sony FP display rather than a CRT.I'm able to change the resolution now as expected.my problem, however, lies with the TV itself. I can't seem to get it to actually display the output. I'm able to remote desktop into the box and can see Gnome logged in and everything.However nothing on the TV itself.How do I troubleshoot this? Am I missing something obvious?
View 6 Replies
View Related
Nov 20, 2010
I have my main box, Ubuntu 10.04lts, and I am trying to use remote desktop viewer to see the desktop on a Windows XP machine. The machines are side by side The Ubuntu box is hardwired to my network router, and the XP machine is connected via wireless. Both get to the internet fine, and I can ping the Ubuntu box from the XP box. But, I cannot ping the XP box from the Ubuntu box, and Remote Desktop Viewer won't establish a connection to the VNC server I have running on the XP box.
View 6 Replies
View Related
Sep 30, 2010
i am having trouble connecting on teamviewer to my home computer. i can do file transfer but remote access is not working. is there a way i can transfer a file that can restart my home computer or any way i can restart my home computer through the internet?
View 1 Replies
View Related
Nov 25, 2010
I am using 2 PCs, both running ubuntu. I want to connect via remote desktop (vnc, ssh -X, etc) form one to the other. However, what the solutions I found until now offer me, is the possibility to create a new desktop session and view that one (or run an application an view that one). I have an application running on the server, and I want to see that application, without needing to restart it or running it again in a new desktop. Is this possible?
View 1 Replies
View Related
Apr 8, 2011
I am trying to setup my HTPC. I wanted to have the most minimal overhead possible so I installed Ubuntu 10.10 server from the mini.iso and just added the ssh option. I then used the following command to give me a desktop environment because I will want to run firefox and it apparently requires this to run.
Here is the command that I ran:apt-get install xorg gnome-core gdm gnome-applets gnome-system-tools gnome-utils ubuntu-artwork compiz-gnome firefox sysv-rc-conf.The desktop works fine and I can open fire fox, however, the remote desktop is missing from the preferences menu.How can I install this? I would like to add the remote desktop option from a command line.
View 6 Replies
View Related
Jul 19, 2011
I have set up a server running ubuntu desktop, and I'm able to logon through remote desktop (win 7). The problem is that if I logon from computer 1 and open some programs, I don't see these programs when I logon from computer 2.I logon with the same user, so I find this strange. Is there some setting I have missed to be able to see the same from any computer (logon through remote desktop).
View 5 Replies
View Related
Jun 25, 2010
Have tried to install 10.04 from a cd sent to me by ubuntu. lts on an x-windows medion pc mt7 (med mt 345). Previously comp. was running windows xp pro. After pressing restart at end of install process I get nothing! Black screen, no mouse control , no keyboard control, nothing at all.
Have tried putting cd in again but get nothing, on pressing restart the cd was politely ejected. Have tried rebooting a few times but get no response. Everything is switched on. So now I cannot even get a terminal up, the only thing I am fairly certain about is that the computer is sending a signal to the screen as there is Not a "no signal" message.
View 4 Replies
View Related
Jul 23, 2010
[code]...
this is my AGP card. My problem is while using ubuntu.. i experience sudden black screen and when the black screen appears it appears for forever until i restart the my computer, it happens suddenly and many times and im having this problem in ubuntu only never experienced in windows.. as i kicked of windows and using ubuntu so i am having this problem regularly. I am using Ubuntu 10.04 Lucid. Ram 512. And i am 10 days Old in ubuntu
View 2 Replies
View Related
Jul 27, 2010
this explanation could take a paragraph or two. I have 7 hard drives in my system. One is a 250GB PATA I use for the Ubuntu install, 3 are 1.5TB SATA Seagates and the other 3 are 1TB SATA Seagates. I have had to replace 4 drives (one of them is the same drive twice) in order to get 6 that actually work well. That's a 40% failure rate. Most of the failed within a week or so of putting them in.
Through all of that I have learned a few things and now have them configured as follows. I have all six of them Raid5 with 1TB partitions. And then the 3 extra 500GB partitions I put as Raid 5 also. Seems weird, but it saves 1TB of space instead of having 3 1.5TB RAID5 and 3 1TB RAID5.I then use LVM to make it all one big 6TB drive. Yummy, lots of space.
Here's the problem I have had the last couple of times I restart the computer the 6X1TB RAID does not start up, or I should say it has all the drives as spares (the 3X500GB RAID starts fine). I have to use --force to get the raid to load, and all 6 load fine. I believe it says something about having to write something to two of the drives (I believe it is something about the superblock) to make them the same. I'm sorry I did not catch the message.Is that enough information for someone to tell me why it does this? It's done it twice now, when I reboot the computer.
View 2 Replies
View Related
Oct 8, 2010
just installed ubuntu 10.04.1 after using ultimate for abit but having sound issues which i thought could have been os based.Sound works fine from boot and continues fine until i open options and try to configure my mic settings, i get like maybe 5 secs to make adjustments then all my sound dies totally. The icon then shows as speaker with 3 lines next to it and within the configuration for sound my mic hardware vanashes. I cannot get any sound until i restart my computer and so cannot use apps like skype which i do tend too use alot.
View 2 Replies
View Related
Feb 27, 2011
I was playing with the Gnome-shell and my gui crashed. I was stuck in full-screen Terminal (i.e., Ctrl Alt F2) but I could not figure out how to shutdown/restart the computer.Anybody know if there's a command for this that works from within Terminal?
View 8 Replies
View Related
Apr 4, 2011
I have a slight problem. I think it is corrupted file(s).
My Debian Testing KDE is not functioning properly. When I Leave and click Restart Computer, the computer does not go to a reboot but goes to the KDE login screen. When I cold boot the computer and click Restart Computer from the KDE login window, the same thing happens, the login window reappears.
When I choose Turn Off Computer, the computer properly powers down.
It looks like I should re-install something but what that something is I don't know. I checked the boot and dmesg logs. Nothing leaps of the screen at me but I have to admit that I am not 100% sure what I am looking for.
View 4 Replies
View Related
Oct 25, 2010
Done a fresh install of Fedora 13 - it's the only os on the computer. Everything appeared to go well, but I'm unable to restart the computer. It gets to a point where it says restarting and just hangs there. Had a bit of a search through the forums and I see this was a problem for some people with earlier versions but haven't seen much mention past Fedora 10, and there doesn't seem to be a universal fix that's worked for everyone so not sure what I should be doing. There was some mention of the problem being related to nvidia drivers, but my video card is an ATI 4850 so that seems to rule that out as a possible cause. I've had several years using Linux (mostly Ubuntu and openSUSE) but hardly any experience with Fedora.
View 1 Replies
View Related
Jul 10, 2011
Is there a way to have drag and drop access between Linux and a Windows remote desktop connection?
View 1 Replies
View Related
Jun 23, 2010
I tried to install Ubuntu as a dual-boot on my Windows XP machine, using the USB stick trial OS and automatic installation. My screw-up came when I left my external USB hard drive plugged in during the install, and as far as I can tell, Ubuntu was installed on that as opposed to my internal HD. Now when I try to boot, I get knocked straight to the grub rescue prompt with an error message that basically shows my "no such device (my external's ID)" -- assuming that the MBR (which I know nothing about editing) is trying to boot off the external that isn't actually enabled until an OS starts it up, and dumping me at the rescue prompt when it can't find it.
I can still load up the trial Ubuntu off the original USB stick (though can't get online with it without wireless drivers), but that's as functional as the computer gets right now. And I don't have a Windows Setup CD anywhere (using a rooommate's Mac at the moment with a terrible European keyboard on it). So is there any way to edit the MBR or something to tell it to boot my regular XP off my internal HD, at which point I can re-partrition and try this whole thing again, or otherwise remove the failed install of Ubuntu through the trial-stick or... well, I'll leave the suggestions up to you all. I've been working on this since about 4am last night and my brain is kind of fried.
View 3 Replies
View Related
Jul 2, 2010
I have a Dell desk top PC, running WinXP and Ubuntu 10.04 LTS with a Ge-Force FX 5200 video card. In trying to get both monitors to work properly I thought it would help to reinstall Nvidia binary X.Org driver V173. After I removed the driver I tried to restart the computer with Umbuntu, it hangs up at the Ubuntu logo. I can boot with the live disk, I also tried to reinstall the Nvidia driver But the machine still will not boot from the hard drive, it will boot into Win XP normally.hould I just reinstall Ubuntu or fix the problem I created? My skills working in Terminal are minimal
View 7 Replies
View Related
