I'd like to set up remote desktop which I can access from any computer with a VNC client, without knowing the IP address in advance and without having access to the "server" at the time of access. I'm aware of the security risks, but there's nothing critical on the server computer, and I'll make sure I use a good password, so I'd still like to go ahead. Is this possible?
View 8 Replies
I have a fresh install of Ubuntu 10.10 on a home server. I can connect to it using vinagre from another computer just fine. However, if I restart the server I can no longer vnc to it because I need to log in (start a gnome session). Is there a way to do this using just vinagre? Do I need to install another vnc server on my home server? The problem is that I don't want to carry a monitor from another room just so I can log in and start a gdm session if the home server gets restarted.
View 1 Replies View RelatedI have an ssh question that I have not been able to figure out.
I am sitting in front of computer A on computer B I would like to start mplayer and have it display a movie on computer B's screen. I think a better question might be how do I start a gui application and the Desktop on a remote computer threw ssh.
I have been trying to use the remote desktop so I can get my files and stuff from one computer and use it on another one, I have not been able to figure it out...
View 4 Replies View RelatedI want to be able to use my desktop from work over VNC but it won't let me connect. In the Remote Desktop Preferences I have "Allow other users to view your desktop" checked and I also have "Allow other users to control your desktop" checked. But it says below that "Your desktop is only reachable over the local network. Others can access your computer using the address 192.168.1.10 or brownserver.local."
Under the Security section I have "Require user to enter this password" checked and I've filled in a password for it.
I've also port forwarded port 5900 to my desktop on my router so that shouldn't be an issue either. When I attempt to connect over the internet from my laptop I get a message that says that the connection was refused. So I think my request is at least making it to the desktop, it's just that the desktop doesn't want to allow it.
One quick question though....I'm not sure, but I might have changed the default port on which VNC is listening on this machine. I don't remember if I did or not. And if I did, I don't remember how I did it. Could someone point me in the proper direction to see which port remote desktop is listening on?
I have been trying (unsuccessfully) to remote access my girlfriend's Ubuntu machine to fix a few things. The problem is that she lives in Japan and I live in RI, USA! Is it even possible to ssh or Remote Desktop her computer with such a high ping rate? (average ping time is 300ms) If so why can I not connect?
View 2 Replies View RelatedMy linux PC is connected at work and I was able to configure the IP to connect to the network. I need a way to access the linux computer from other windows PC in the office via shared folders and or remote desktop. I am stumbling upon "VNC" on google.
View 1 Replies View RelatedToday I noticed my Desktop was being controlled remotely from over the Internet even though I had it set for 'local network only'. Foolishly I relied on this setting and hadn't specified a password or other security. The remote user had opened my Firefox passwords page and was perusing this when I pulled the plug.
All external checks confirmed that my router/firewall is actively blocking correctly. How could this happen? How can I prevent this in the future? I had recently install the Firefox extension for Weave Sync and wonder if that had anything to do with it?
how i can get remote desktop to work on a outside Internet connection i can get it to work on my router but my brother cant access it from his pc i have vnc view on his pc but ever time i try to connect from his pc it keep saying cant connect any idea how i would fix this i have the firewall on my lunix system turned off
View 9 Replies View RelatedIm using Ubuntu and i need help dose anyone know how i can get remote desktop to work on a outside Internet connection i can get it to work on my router but my brother cant access it from his pc i have vnc view on his pc but ever time i try to connect from his pc it keep saying cant connect any idea how i would fix this i have the firewall on my Linux system turned off.
View 5 Replies View RelatedI would like to set up a remote desktop connection between two computers over the Internet. I already tested remote desktop within a local network but it's far from secure enough this time. I will try to follow this guide [URL] (ssh portforward and internet). This still leaves ufw and how it should be configured. Let's say I have this setup, server computer has ip 12.341.245.124 and the client has 78.12.543.234 how should ufw be configured to be secure? This remote desktop wont be connected to a local network
View 1 Replies View RelatedRunning Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
I am going to a country with government managed firewalls. How can I connect to my home computer's (Ubuntu 10.04) internet connection from a computer behind these firewalls?
View 2 Replies View RelatedI maintain plain vanilla Ubuntu 10.04 systems for several friends. Each machine has only one user, the owner. I use Remote Desktop to instruct and to perform maintenance. Here's my problem:After updating the system, if the kernel has changed, a restart is needed. If I do a restart, I then have to phone the owner to insert his login credentials in the gdm login screen, before I can do anything else via Remote Desktop on that machine.There ought to be a simple way I can avoid the phone call and login myself.
I'd strongly prefer not to use any software that is not included in a plain vanilla Ubuntu 10.04 installation. And I don't want to weaken system security beyond what it is now.Is there a solution? Or, what is the simplest solution?
I'm not really a newbee in Linux but I am a newbee in networking. I have both a Ubuntu laptop and a Gentoo desktop computer. I have just bought me the MBR1000 Cradlepoint router and it works great with my Verizon USB 760 modem plugged in it. I can now send and receive email on my Ubuntu laptop. I like it.My Gentoo desktop computer is just sitting there with no Internet access because my Verizon modem is no longer plugged into it but plugged into the router instead. Only my laptop now has Internet access. The laptop has an integrated wireless card built in the MB but my desktop has no such capability.
Is there a way (besides buying a wi-fi adapter) to get Internet access on my desktop computer through networking so that the router would give both computers Internet access at the same? My Gentoo desktop does have an ethernet adapter that perhaps I could useThe router has several LAN ports and one WAN port, both unused.
I've been trying to find a way to watch videos from my main desktop computer on another computer I've plugged into an HDTV. I'm such a Linux newbie that I decided to give Mythbuntu a try. It was way to complicated for what I needed, and I'm sure that some more experienced people reading my first two sentences laughed to themselves at my naivety.
What I am trying to find is simple: browsing one computer's home folder from another computer, and playing the videos therein. If there's anything like Mythvideo that requires less than half of the skill requirements, I will telepathically send love to the person that informs me of it.
I'm working on getting my myth box hooked up to my Sony flat panel display.Originally the nvidia drivers could not read the EID, so defaulted to only 640x480 over my HDMI-DVI connection.I manually updated xorg.conf with a mode for the resolution I know the thing can handle. Suddenly there are several resolutions avaialble in nvidia-settings and it seems to be communicating with the TV, as it is now listed as a Sony FP display rather than a CRT.I'm able to change the resolution now as expected.my problem, however, lies with the TV itself. I can't seem to get it to actually display the output. I'm able to remote desktop into the box and can see Gnome logged in and everything.However nothing on the TV itself.How do I troubleshoot this? Am I missing something obvious?
View 6 Replies View RelatedI have my main box, Ubuntu 10.04lts, and I am trying to use remote desktop viewer to see the desktop on a Windows XP machine. The machines are side by side The Ubuntu box is hardwired to my network router, and the XP machine is connected via wireless. Both get to the internet fine, and I can ping the Ubuntu box from the XP box. But, I cannot ping the XP box from the Ubuntu box, and Remote Desktop Viewer won't establish a connection to the VNC server I have running on the XP box.
View 6 Replies View RelatedI am using 2 PCs, both running ubuntu. I want to connect via remote desktop (vnc, ssh -X, etc) form one to the other. However, what the solutions I found until now offer me, is the possibility to create a new desktop session and view that one (or run an application an view that one). I have an application running on the server, and I want to see that application, without needing to restart it or running it again in a new desktop. Is this possible?
View 1 Replies View RelatedI am trying to setup my HTPC. I wanted to have the most minimal overhead possible so I installed Ubuntu 10.10 server from the mini.iso and just added the ssh option. I then used the following command to give me a desktop environment because I will want to run firefox and it apparently requires this to run.
Here is the command that I ran:apt-get install xorg gnome-core gdm gnome-applets gnome-system-tools gnome-utils ubuntu-artwork compiz-gnome firefox sysv-rc-conf.The desktop works fine and I can open fire fox, however, the remote desktop is missing from the preferences menu.How can I install this? I would like to add the remote desktop option from a command line.
I have set up a server running ubuntu desktop, and I'm able to logon through remote desktop (win 7). The problem is that if I logon from computer 1 and open some programs, I don't see these programs when I logon from computer 2.I logon with the same user, so I find this strange. Is there some setting I have missed to be able to see the same from any computer (logon through remote desktop).
View 5 Replies View RelatedIs there a way to have drag and drop access between Linux and a Windows remote desktop connection?
View 1 Replies View RelatedI have VMware server installed on this machine. I also have a Windows XP VM running all the time. I have it bridged so it gets a valid IP from my router and such and is in my network. I use KRDC to remote desktop to it and I make it full screen. However if I want to go back to my desktop I have to minimize KRDC.
Is there a RPD client out there I can use so I can go full screen on 1 desktop and have everything else on another desktop then use KDE's Desktop switcher or ctrl+alt+arrow keys to switch between desktops to flip between Windows XP and Linux without having to minimize?
I hope I am not repeating a thread. I am trying something very simple: To remotely connect from a ubuntu desktop to another ubuntu server (physically not reachable). When I ping the server, it seems to be fine. However, when I try to ssh, the connection is closed by the host. I am the only one using the server. It worked fine a few hours ago and I was trying to copy a lot of data using a couple of scp sessions. At some point the connection was closed and I cannot access the server anymore.
View 2 Replies View RelatedAs for what I am trying to do: I am looking for a way to run scripts and/or launch programs from a cell phone using SMS. I've found a few options close to this, but nothing that really fits what I'm trying to do. It seems I can either get speed or ease of use, but not both. To explain:
If I understand correctly, Evolution has this functionality through email, but email isn't instant. I'm trying, as best as I can, to use my phone almost like a remote; sending email from my phone would create a considerable wait time.
Using Pidgin's Buddy Pounce feature with AIM lets me use SMS to get a quick response, but I'm running into the problem that I can't make its action depend on what the message says. I want to be able to text, say, "Shutdown", and have my computer run a shutdown command, but Pidgin's Buddy Pounce feature doesn't seem to support checking for specific messages. I've been unable to find a plugin that changes this; if there was, it'd probably be my best bet.
Bluetooth is out; my computer's bluetooth adapter died a long time ago. Additionally, some of the things I'd like to do would be when I'm not near the computer, so even if it was functional, it would be limiting.
Anything that requires any apps for android, iPhone, or w/e are out too. I have an LG Dare, and while it's a nice phone, you can basically forget custom apps.
So, to recap, I'm trying to find some way of sending an SMS or email from my phone, have it be received as quickly as possible, and have the computer run a console command based on the content of the SMS/email. Any ideas?
I'm running Ubuntu 10.04.
My home network consists of two computers that share one internet connection via a router. I have a desktop computer that runs Ubuntu (Karmic), connected via ethernet; and a netbook that runs Windows 7 (will be Ubuntu, eventually), which connects wirelessly. Both computers have multiple user accounts. What I would like to do is access my account on the Ubuntu desktop via the netbook while my wife is using the desktop with her account (or enable her to access her account on the desktop while I am using it). I looked into VNC, but it, apparently, only supports the active desktop. So, if someone connected to the computer while it was in use, they would be looking at the other user's desktop. Is this a misconception on my part?
So, I have 3 questions:
-From the netbook, how can I log into my account on the desktop and just get a command-line shell?
- From the netbook, how can I log into my account on the desktop and actually have access to my Gnome desktop?
- If I leave my house with the netbook, and want to log into my desktop machine across the internet (CLI and/or Gnome), how can I do that?
I want to use one computer to control Banshee on another computer in the room. without using remote desktop. That's not going too well for me (it works, but it's slow and clunky over my network).
View 1 Replies View RelatedI've been using Linux on a more regular basis for the last two months now and have been able to find replacements for most of the software i use in Windows, or by using Wine. But i have one big problem that is keeping me from switching permanently to Linux. I frequently use remote control software to access and control my computers, both at home and to access my computers from remote places over the internet. I've been using NetOp, and more recently RealVNC. The client, or "viewer" part of RealVNC is working fine in both Windows and Linux. It's the host or server part that i can't get to work properly when it comes to VNC. The vnc.so module doesn't work on my system, x0vncserver program seems rather useless since it refuses to load before i have a network connection and this prevents me from start the program automatically as the wireless connection isn't ready and the vncserver command isn't an option since it doesn't display what i see on the actual screen. So, does anyone have a nice solution to this problem? Either to make VNC work or suggest some software that does. Anyway, it has to work on both Windows and Linux, in Linux it has to display the native x display, there must be built-in encryption and preferably be free or open-source software. I'm using Ubuntu 9.10.
View 5 Replies View RelatedI am using ubuntu 9.10 and I want to know if I can power on a remote computer working on windows server 2003.
View 5 Replies View RelatedI want to show you this scheme:MyPC -> router -> internet <- router <- Mom'spc I want to connect from my pc to my mom's pc using ssh. The first router doesn't represent a problem, but my mom's router does. Our IPs are both dynamic (anyway, I can easyly know them) and I have opened the port (TCP/UDP) 2100 on the router in order to open a gateway on mom's pc.The firewall is not enabled on the router, nor on mom's pc.
Granted all this, now I should be able to connect to that computer using ssh:ssh user@ip -p 2100 But I can't, I always get a "connection refused".if I do it on my intranet, I can connect without any problem (to others computers, of course, not mom's) What's the reason because I always get a connection refused?
