Ubuntu :: Put A Blank CD (Verbatim CD-R) Into External CD Drive Using 10.04 LTS
Jun 12, 2011
I put a blank CD (Verbatim CD-R) into my external CD drive using 10.04 LTS. Dmesg shows:
[ 255.950512] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 255.950527] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 255.950542] sr 3:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 255.950558] sr 3:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
[ 255.950589] end_request: I/O error, dev sr0, sector 0
When I go to /media there are no directories that could be the CD-ROM. I therefore cannot 'see' the CD (which is blank btw). I then went into XP. Windows Explorer could see the blank CD. I then wrote to it. I then went back into Ubuntu. Now when I put the CD into the external drive Dmesg shows:
[97.594505] ISO 9660 Extensions: Microsoft Joliet Level 3
[97.674629] ISO 9660 Extensions: RRIP_1991A
When I go to /media I see the name of the CD. Why will XP and Ubuntu see the CD with information on it but only XP can see the blank CD?
I have been using g4l to do cold backups of my OS partitions for a LONG time. I finally decided to configure a boot USB flash drive instead of a CD for this purpose. Using the EXCELLENT instructions on this page [URL] I configured a Lexar 1 GB Firefly drive and have used it for some time. When a newer version of g4l came out I decided to build another boot flash drive using a Verbatim 1GB drive. I followed the same instructions and...
The Verbatim flash drive will boot my Dell Studio XPS and my Dell Latitude 2100 netbook. It will NOT boot either of my Dell Dimension 4600s. The Dimension 4600s respond with a message "Missing operating system" when I try to boot from the Verbatim drive. The Firefly works on all machines and I configured Kingston 1GB and 2GB Data Travelers which also work on all machines.
this is my first time doing a custom partition, I tried to do it with only the assistance of reading as I go, but I don't believe I found enough information last night. What I am trying to do, is put openSUSE on 200gb out of 500gb space on my external hard drive, as well as on 50gb space out of 110gb on my internal hard drive. The remaining 60gb space on my internal drive is going to be for microsoft windows. The remaining 300gb space on my external drive will be storage space. It seems like what I want to do is achievable
What I want is to have my main openSUSE on the external drive (primary partition I think?), with the GRUB loader so that when the external drive is not plugged in, my little brother can use windows on my internal hard drive. I tried this last night, and when installation had finished, I rebooted my computer and the screen was just blank black with the flashing white line as if waiting for me to type, although it would not allow me to type when I tried. It would be great if someone could tell me the order in which to partition, including the terms primary partition, extended partition, and logical partition, as needed.. I don't want to permanently muck up this machine.
After the login screen, my laptop screen is active but the external LCD monitor hooked to my laptop goes blank which was active to that point.
Here are quite a few details which might help you in diagnosing the problem
alt + clt + f1 takes the monitor screen to command line but alt + clt + f7 fails to bring it back to GUI. The monitor just freezes!!
Contents /etc/X11/xorg.conf # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. #
Previous Fedora releases allowed me to connect to my external monitor via an HDMI-DVI cable to use as my main monitor from my laptop. However, after I did a fresh install of Fedora 15, I have this problem that when I login to gnome 3, both laptop screen and external monitor go blank. I cannot ctrl-alt-f2 to go to terminal. I end up having to ssh from another machine and reboot. Each time, the reboot doesn't even work since I have to go and kill Xorg before it starts to reboot.plymouth and gdm seem to be fine and show up the external monitor. It is only when I login to gnome3 that I get the blank screens.
I have installed Fedora 15 64bit live with no apparent errors and I get to the "Welcome" where it says just a few more steps before I can start using Fedora after filling in the details hit the "Forward" button in the lower right hand corner. The problem is I can't see the forward button, its like I need to page down or something but everything I have tried isn't working. I then decided to use the Fedora 15 64bit DVD thinking a driver was missing or something and it is still the same issue. I am using a Thinkpad T61 laptop with an external monitor and the external monitor goes blank when it boots to the welcome screen, but I can scroll over to the external and see the mouse cursor on the external. It seems that if I could see the welcome screen on the external monitor that I might be able to see the "Forward" button. Both installs went without a hitch, the DVD install found my internet connection and downloaded a bunch of stuff and the DVD install took about two hours to complete, again with no errors reported. I hope I am not being daft here and missing something obvious.
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I am running Debian 8.3, and I'm running Gnome 3.14.1.I have an external monitor plugged in with HDMI, and while Linux is loading both screens are on duplicate. Once the GUI kicks in, only the external screen works, so I have to enter my password blindly. Then, I open a terminal and run
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
I just bought a new desktop. I want to set it up as a dual boot windows/ubuntu. I installed my copy of XP on it with no problems. When I ran the Ubuntu 9.10 amd64 installer, the drive partitioner keeps coming up blank. There is no drive map, and all of the controls are faded out. I tried it with just windows on the hard drive first. Then I used GParted to reduce the size of the windows partition and make the rest into an ext4 file system. Same result. I had no problems with this on my Vista/Ubuntu laptop. If anyone has any idea what I'm doing wrong
His Drive detects every CD/DVD as Blank. Though they all are not empty discs. and It recognizes(I meant it reads) Ubuntu Installation CD as usually! Is there any Hardware problem? or it need firmware upgradation??
I'm not sure what to do, but I just rescued photos and documents using ubuntu live cd, gddrescue and photorec. The data carving went fine and I was able to move all of my recovered jpg's into a recovery/jpg folder, as well as my word doc's into a recover/doc folder. I also have recovery/video and recovery/audio. Now here's my problem...
I used the right-click "safely remove drive" from the ubuntu interface and then unplugged my external drive. I then tried to view the recovered photos, etc on my windows 7 desktop, but when I plug in the external drive I get an error and a prompt to "format the drive" so that windows can use it.
I plugged the external drive back into my failed laptop and with the ubuntu live cd can see the drive, but none of the folders display. I can cd "change directories" to all of the folders using a terminal, but still can't see them outside of the terminal. That is, with the ubuntu interface. I'm just trying to finish up recoverying these photos, which I thought I had done.
I am using both K3b and Basero to try and burn a DVD Iso. Both programs show that I need to insert blank media in the drive, however the disk utility shows that I have an unformatted disk in the DVD-RAM drive. Using Ubuntu 10.10 with wine installed. I mention wine because I remember messing with it a while back to get a multi disk install to work and needing to mess around with mounting the disks in odd configurations however cant remember exactly what I did. (It was a late night)
My new PC fails boot when having my IDE DVD drive connected. If the drive is removed the OS boots up without any issue. Once the PC is powered ON, the grub menu shows up, but when Ubuntu 10.10 is selected I get a blank screen with a blinking cursor on the top left corner and I have only option to force shutdown the CPU.ON selecting windows 7 i'm able to boot successfully and use the DVD drive without any problems.
I got an ISO from a friend and it's been sitting ontop of my desktop for ages now, and I'm not able to burn it because for some reason, Ubuntu has stopped reading any CDs in my drive.
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
I need to re-format an external drive. All the instructions I have found start with figuring out where the drive is mounted (sda, hda, etc.). However, as soon as my RH Linux machine sees the drive's format (ntfs) it decides it won't even mount it in the first place. Gives me an error message. Also, the drive doesn't show up at all via "df -k". how to convince RHL to be a little more accepting?
I downloaded the OS I wished to use, loaded it onto a clean 4.0GB drive, everything went as planned. But then I rebooted, and it never booted the file off of the USB. So, I changed the boot options, and tried it again. Now, every time I boot with the drive in, it goes normally and then opens a blank page with only one line of text detailing the date of copyright, something about Linux, etc... And a blinking cursor. Is this normal and I just have to wait for it to load, or is something not being processed? Any information you guys need I can obtain, I'm not new to computers but I am new to changing OS's.
I am new to linux and have searched over a period of days on the internet for any reference to installing XUBUNTU 10.10 onto a brand new hard drive that has no operating system on it I have successfuly made the CD using this PC I am on now and Nero Burning Rom from my Nero 9 aplication but I have built a new PC that I wish to put XUMBUTU onto
After the mass amount of updates that appeared for Debian, my DVD drive seems to detect a burned DVD I have as blank now. And when i put in the disc, there's two copies of the DVD drive on Computer, both of which are labeled CD/DVD Drive: Blank DVD-ROM Disc. I have gone in to disc manager and found that it is possible to mount the volume on the disc, and on the second icon it will appear and work. However, this is annoying having two icons.
Now, when I don't have a disc in there, it only shows one drive. My PC may have messed up during the updates, because I just let it update in the background while my sister was using it to show my mom's friends pictures and she randomly closed out of one of the windows without asking me anything (ffff), so that may have messed something up. Does anyone know how I would go about fixing this?
i have Ubuntu10.04 on a dell desktop and 9.10 on a dell mini10 net-book installed from flash drive both work flawlessly, And have been for month but now i finally buy a external drive case with its own power supply slip a working drive from the desktop into it plug it in and nothing it doesn't show up on the desktop or under computer on either the desktop or the net-book.
I have a USB flashdrive and when ever I plug it in it's named CORSAIR. This I like. Now I have some external hard disks that I use for back up. They are USB also, but they tend to get some random name that is mounted to /media like disk-1. How can I name a specific drive to something like "backup" and have it always be recognized that way even across different different Ubuntu boxes.
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
I've got a question: how can I format my Creative Zen Vision M and use it then as an external drive? I dont want to use it as an MP3 and as a hard drive, i want to remove everything from it and use its 30 gigs.I'd rather format it into fat32, but could also deal with ext3
I would like to format my new external hard drive (1.5TB) so it can be accessed on both Linux (Ubuntu) and OSX. Is that possible without using FAT system? If yes, what file system should I use?
