I have a problem with my Ubuntu which is when I plug my usb mass storage I get nothing as id i haven't plugged it. Nothing appears in the Computer , and when I do the command fdisk -l.. the usb mass storage isn't there to mount it and when i press lsusb
Code:
Here is the dmesg
Code:
My ubuntu is lucid 10.04, and my mother board is Gigabyte GM31.
I just discovered that inserting any USB drive causes an immediate hang of the system. The keyboard caps lock and scroll lock lights blink. Only recourse is to power cycle the system. This is after installing Kubuntu 9.10 in January, I don't believe I had occasion to insert a USB drive until tonight. 100% reliable. No entries in logs, presumably because it hangs the kernel when it happens. The /var/log/kern.log file has been corrupted due to file system damage (1+ sectors of some other file inserted into chain) and probably other files as well.
I've not had occasion to report other bugs, but I've found no way to report anything other than application bugs. I tried using "ubuntu-bug kernel" which helpfully said there was no such application as 'kernel' and has been busy "collecting problem information" for the last half hour or more. Somehow I don't think its ever going to finish.
The crash only happens when booted into Kubuntu 9.10. If I boot off of 9.04 then USB drives work fine. Both USB drives I've tried reliably produce the crash. One is a random cheap USB thumb drive (imprinted "Cisco"), the other is a 16GB Corsair Voyager.
You have .exe files to install stuff. Even tho I have used ndiswrapper in the past I can't remember how now. I've got a nice old laptop with a nice install of SUSE 10 that does everything I want except connect to the internet. I've got about 1 more day of patience remaining before I have to revert to the hated Ws. I even got a supposed "plug and play" Asus usb-n10, but have not been able to work out the install.
View 6 Replies View RelatedWhen I connect a USB stick to my laptop, it is mounted as root:root. I want ot be able to use it as the logged in user
It has worked in the past (1+ month ago), but recently it just mount it as root:root.
My userid is 1000, so somewhere in the system it knows that the current user is relevant.
The directory created
The date is off System time is correct - so this could be an indication of what is wrong.
I have tried with my own custom compiled kernel and now I am using the latest 2.6.38 official image.
I have Ubuntu9.10 installed in my laptop, and I want to give read-only permission on mass storage device (USB flash & external HD) & CD-ROM.
please guide me how this is possible. It should be automatically.
It's necessary for security purpose.
I am so completely frustrated with this and can't seem to find any solid answers. I have a Google Nexus One phone. I want to also use it as a portable music player. I can find no player for Linux that can do ALL of the following:
- copy music
- transcode when necessary
- transfer cover art in appropriate format
- transfer playlists (music files AND .m3u playlist files)
Banshee is the closest, but it is so painfully slow, has many problems with tags and also doesn't transfer playlist files. Banshee advertises support "out of the box" for this device. I've tried overriding with an .is_audio_player file, but it is ignored. Rhythmbox will transfer song files and transcode as necessary, but no artwork, no playlists. Exaile doesn't recognize this device for some reason.
I am currently using opensuse 11.2 with kde 4.3.1. I am having a problem when I connect my samsung R450. It will not mount or show up as a usable device in either Dolphin, Amarok, or on the device notifier. I have tried manually mounting but I get an error saying it cannot find such device. I did not have any issues using it in 11.1 with KDE 4.2. It is being recognized by my system, but not allowing it to show up as a storage device or being mounted.
output of dmesg:
PHP Code:
output of lsusb:
PHP Code:
When I shut of the usb mass storage on the samsung R450 it switches to modem and is properly detected and usable as modem by my system.I don't have any other problems with other usb devices, such as a digital camera or flash drives, so I don't know if I just missing a system setting or configuring something wrong.
I have a problem when trying to mount a memory card in my cell phone. I connect the phone with an USB cable, select mass storage as the phone prompts it, but no luck.
dmesg shows
Code:
[ 200.673190] usb 3-1: new full speed USB device using ohci_hcd and address 4
[ 200.823377] usb 3-1: New USB device found, idVendor=05c6, idProduct=1000
[ 200.823386] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Code].....
Just to be sure I tried the same thing with FreeBSD, though I knew from past experiences what to expect from it. It just worked(tm) flawlessly, but I'd rather not keep FreeBSD just for the sake of one device I can't seem to get working with Linux. All I can guess it must either be a kernel bug that has persisted for far too long or a faulty udev rule.
steps to block usb mass storage devices in linux
View 2 Replies View Related* I am implementing mass storage device on a test board.
* It contains NAND flash.
* Using corresponding "udc driver" and "g_file_storage" I could make my test board enumerate as mass storage device on my Linux machine.
* my 16 MB pen drive (test board) is now ready for read/write.
But there are some Bad Blocks on the NAND.Hence copy is not complete. Although on Linux machine there is no error message. Now , what is there in a normal pen drive which manages the Bad Block or what am I missing so that such Bad Blocks are managed.
Here is the error I get on my test board :
mtdblock: erase of region [0x2c0000, 0x4000] on "Bon 2" failed
end_request: I/O error, dev mtdblock2, sector 5664
Buffer I/O error on device mtdblock2, logical block 708
[code]....
I have a 1TB external HDD which I use to store my music library of roughly 40 gigs. Therefore I would normally import music directly from it to my Rhythmbox library while keeping everything stored on the removable drive. In recent versions of Rhythmbox this is no longer needed as the application integrates my external HDD into the side pane and lists the music automatically. This is great although when closing Rhythmbox and reopening it, the drive has to be scanned all over again. This is a huge pain when it has to scan through 40+ gigs of music.
Therefore I would like this feature disabled and removed from my side pane. It is not needed and causes quite a large annoyance. Either I want it removed or the ability to keep the index of music from the drive in Rhyrhmbox at all times. Achieving this would be fantastic and would switch me back to Rhythmbox. recently I have been using Exaile which I love but rhythmbox not working bugs me.
I am beginner in UBUNTO 10.04 LTS. I have a mobile broadband of Relience which use the device of Huawei EC 1262. I have a problem with this modem. when i installed required packages for this device like usbswitch, wvdial etc, my internet connect works fine but as i switch off the PC and restart, PC can not detect the modem, it detect as mass storage device. Is there any command/option that i switch the mass storage device into modem in the terminal window or on the GUI platform mean on the desktop screen.
View 2 Replies View RelatedHow does the read & write request from a command prompt go to usb & retrieve the file ? When a read request is given , I/O manger sends the request to file system manager (FSM) and from FSM to mass storage device drivver and from there to mass storage , is this right in Linux ?
View 1 Replies View RelatedI need to enable my new E2120 samsung phone as a mass storage device. but I think I need a USB driver. Had a good look round the forums but can't seem to find any posts. Its quite a new phone but hopefully the solution is already about. When I plug it into the USB the phones screen has a hashed out 'mass storage' option.
View 1 Replies View RelatedSince I use openbox with some packages from Xfce4 (mainly for convenience) I get most stuff "for free" as it were when using openbox, but I can't figure out how to mount android devices in a simple way. I can either do it manually, or install some other file manager that has this capability. This leads me to my question, I've noticed that if I install Nautilus, which automatically mounts android devices OotB, I get this functionality in Thunar as well. This leads me to believe that there is clearly a dependency package of some kind installed when running apt-get install nautilus that enables it, It'd be great to get this functionality in Thunar without having all the nautilus packages just littering about for no good reason. the required package is gvfs-backends, which I should have realized when I was unable to browse smb:// addresses. You forget a lot when you only make a fresh install once every 2 years or so.
View 0 Replies View RelatedI've searched high and low, and can't figure this one out. I have a older Olympus Camera (2001 or so). When I plug in the USB connection, I get the following log output:
$ dmesg | grep sd
[20047.625076] sd 21:0:0:0: Attached scsi generic sg7 type 0
[20047.627922] sd 21:0:0:0: [sdg] Attached SCSI removable disk
Secondly, the drive is not mounted in the FS, but when I run gphoto2 I get the following error:
$ gphoto2 --list-config
*** Error ***
An error occurred in the io-library ('Could not lock the device'): Camera is already in use.
*** Error (-60: 'Could not lock the device') ***
What command will unmount the drive. For example in Nautilus, I can right click and select "Safely Remove Device". After doing that, the /dev/sg7 and /dev/sdg devices are removed.
The output of gphoto2 is then:
# gphoto2 --list-config
/Camera Configuration/Picture Settings/resolution
/Camera Configuration/Picture Settings/shutter
/Camera Configuration/Picture Settings/aperture
/Camera Configuration/Picture Settings/color
/Camera Configuration/Picture Settings/flash
/Camera Configuration/Picture Settings/whitebalance
/Camera Configuration/Picture Settings/focus-mode
/Camera Configuration/Picture Settings/focus-pos
/Camera Configuration/Picture Settings/exp
/Camera Configuration/Picture Settings/exp-meter
/Camera Configuration/Picture Settings/zoom
/Camera Configuration/Picture Settings/dzoom
/Camera Configuration/Picture Settings/iso
/Camera Configuration/Camera Settings/date-time
/Camera Configuration/Camera Settings/lcd-mode
/Camera Configuration/Camera Settings/lcd-brightness
/Camera Configuration/Camera Settings/lcd-auto-shutoff
/Camera Configuration/Camera Settings/camera-power-save
/Camera Configuration/Camera Settings/host-power-save
/Camera Configuration/Camera Settings/timefmt
Some things I've tried already are sdparm and sg3_utils, however I am unfamiliar with them, so it's possible I just didn't find the right command.
# mount | grep sdg
# mount | grep sg7
# umount /dev/sg7
umount: /dev/sg7: not mounted
# umount /dev/sdg
umount: /dev/sdg: not mounted
# gphoto2 --list-config
*** Error ***
An error occurred in the io-library ('Could not lock the device'): Camera is already in use.
*** Error (-60: 'Could not lock the device') ***
It doesn't show it on the device-notifier, or fdisk, and not sure if this will be any use to you. In windows it appears immediately as a MSD, doesn't show as a modem or anything first.
Code:
linux-gg0e:/home/Chris # tail -f /var/log/messages
Feb 14 10:20:09 linux-gg0e smartd[2752]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 51 to 50
Feb 14 10:20:09 linux-gg0e smartd[2752]: Device: /dev/sda [SAT], SMART Usage Attribute: 195
[Code]....
I would like to download a few (591)images from the Galaxy S phone. Samsung have advised me that to do that I need to place the Galaxy S phone on Mass storage, whivch I can do and plug the phone USB cable to the PC and manually mount the USB. The Galaxy S firmware 2.1-update1 doesn't support automatic mounting! The Galaxy S has an Android platform Kernel version 2.6.29 with root @SE-S604 #2. I'm running Ubuntu 10.04 on a AMD Athlon(tm) XP 1700+ with 1G of ram. It's the manual mounting of the USB connection
View 1 Replies View Relatedwhat are the series of files that are called when a user make copy operation from usb mass storage to hard disk?i have reached the code of the usb mass storage in linux kernel 2.6.33 and i want the exact code the make the copy how can i do that?
View 2 Replies View RelatedI need to auto-mount a storage device AND execute a program passing mount point path to it. How can i do this? I'd like to avoid polling for new storage devices. I'm looking for something like acpid for ACPI events, but working with storage plug events instead.
View 6 Replies View Relatedhere we have an older digicam (Jenoptik/Exakta Model "DC 22", if someone might want to know) that can be switched between some "PC Camera mode" and "Mass storage mode".Unfortunately, if attached to USB, it is always recognized as
Code:
UDEV [1262910483.475886] add /class/video4linux/video0 (video4linux)
lsusb tells:
[code]...
I'm interested in buying a new hardware for my company. The old server (now 10 years old) should be replaced with a new one. Till now, I was looking on different hardware suppliers, boards and different other places. I found a Tyan board [URL]. The hardware spec is quite interesting and the board would fullfill our claims.
how both storage devices will be supported by Ubuntu or Debian??
- SATA-Controller: AMD SP5100
- SAS-Controller: LSI 1068E
I have an icon for what seems to be universal access preferences modifying that is residing near my notification area on top GNOME panel. I have been trying to figure out how to get rid of it, but can't seem to. I took the program off of autostart apps, and have checked running processes to see if I could find which program has it going but I have exhausted my limited knowledge base in solving this.
View 2 Replies View RelatedI used to have the volume icon in Top Panel before upgrading from 9.1 to 10.4 I'm sure it's something stupid I'm not seeing, or maybe not, but anyhow....
View 3 Replies View RelatedI have installed Fedora 12 yesterday and the codecs sound today obtaining audio mp3. I have update kernel to 174 version and after restart I haven't sound. I saw a alert but I ignored it in which said something about a path deleted (i don't remember which). But in Preferences/Sound/Aplications i see that my reproductor is open.
View 4 Replies View RelatedI haven't sound for any application - XBMC, VLC, Amarok, etc.I didn't install or change anything and all work perfect fine until yesterday.
View 8 Replies View RelatedI installed Kubuntu 9.10 this morning and haven't been able to get my wireless working properly. I can connect to my network (WEP 128bit key) and acquire an IP address without any problems. But as soon as it connects it stops talking to the router (about 4 pings after it connects). The pings then change from a reply to saying "Destination host unreachable", even though it works fine on the Windows box I'm sending this from.
View 1 Replies View Relatedi just got this downloaded and i kinda like it. haven't customized it with apps yet, but i'll get to that later. right now i was wondering if there was any way i can set it to panel mode with only my desktop, yet still have my windows overlapping it.
View 9 Replies View RelatedThis is the hard way to learn when you MUST use visudo. That's right. I did something stupid like:Quote:$ sudo vi /etc/sudoersand now have:Quote:
$ sudo
>>> /etc/sudoers: syntax error near line 79 <<<
sudo: parse error in /etc/sudoers near line 79
[code]....
I recently installed Ubuntu 10.04 and I would use my tv as desktop, in wireless connection with my notebook. The problem is that on the page url I haven't found the software for Linux.
View 3 Replies View Related