Ubuntu :: Mplayer Pegged At Or Near 100% After Upgrading To Maverick?
Oct 18, 2010
After upgrading to Maverick, I have noticed that when I'm streaming from a site on the Internet with mplayer in wave format, my processor pegs at near 100%. I have to nice it to get it to relent, but this is a new issue for the upgrade. Streaming mp3 doesn't register very much.
View 2 Replies
ADVERTISEMENT
Jan 7, 2011
As seen in the screenshot, my update manager won't let me mark the proposed kernel updates for installation.I have heard that I would be able to mark them after a few days have passed ( I don't know the reason, though). Well, now it's been 3 weeks that I have them as "proposed updates" and I still can't mark them.I decided to run apt-get upgrade in the terminal and here is the output:
Code:
~$ sudo apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
View 6 Replies
View Related
Apr 30, 2010
After upgrading to 10.04 I get the following pulse error in mplayer before it starts.
Code:
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
[code]....
Not a biggie since I get both sound and video, but it takes a bit longer to start the file then before. Also Kde tells me that the sound card "pulse audio" is no longer connected although pulse seem to live just fine.
View 2 Replies
View Related
Oct 13, 2010
While upgrading to 10.10, I opted to keep my apache conf files as they were (since I forgot to back them up before starting) and now apache isn't happy at all. At first it just wasn't working, so I backed up my entire /etc/apache2 dir, ran
Code:
'sudo apt-get purge apache2'
and then deleted all references and left over config files, then ran
Code:
'sudo apt-get install apache2'
and still apache wasn't working - in fact it did not seem to properly/completely reinstall with all dependencies.
Next I went through in Synaptic and removed a bunch of stuff myself, tried another apt-get purge and install, and still nada. Next I tried:
Code:
'sudo aptitude purge apache2'
which seemed to run a little more robustly. So naturally next I ran
Code:
'sudo aptitude install apache2'
and though it seemed to install everything appropriately, apache was not started and trying to run
Code:
'sudo service apache2 start'
I get an unrecognised service error.
When trying to directly run
Code:
'sudo /usr/sbin/apache2'
I get
Code:
'apache2: Could not open configuration file /etc/apache2/apache2.conf: No such file or directory'
Which is true, it does not exist but I don't understand why it's not reinstalling properly. Luckily this is just a local test server and I don't need to right now, but it would be good to get it back up and running. Could this really be all because I didn't replace my old files with the new conf files?
View 5 Replies
View Related
Nov 4, 2010
Since upgrading to maverick, I no longer have a shade animation. It was working splendidly in Lucid, but now, if I trigger the shade, it just snaps up. No nice, smooth rollup that I like. Screenshot attached of my compiz animation settings page.
View 5 Replies
View Related
Nov 14, 2010
I am unable to shutdown ubuntu after upgrading it to Maverick Meerkat.
I can do Ctrl + Alt + F4 and then Ctrl + Alt + Del but it does not let me use the taskbar button. When I press the shutdown button it just takes me to login page.
View 5 Replies
View Related
Sep 3, 2010
Added the following line to sources.list:
deb [URL] squeeze main non-free
After that I did an update and upgrade.
The following packages were kept back : ffmpeg libavcodec52 libavdevice52 libavformat52 libcairo2 libpostproc51 libswscale0 mplayer ( libcairo2 is on hold ).
To overcome this I did: apt-get install mplayer
The following extra packages will be installed:
liba52-0.7.4 libartsc0 libbs2b0 libdirac-decoder0 libfaac0 libggi2 libggiwmh0 libgii1
libmp3lame0 libopencore-amrnb0 libopencore-amrwb0 libvdpau1 libx264-104 libxvidcore4
It ends like: Unpacking replacement mplayer ...
dpkg: error processing /var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb (--unpack):
trying to overwrite '/usr/share/pixmaps/mplayer.xpm', which is also in package mplayer-gui 2:1.0~rc3++final.dfsg1-1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Processing triggers for man-db ...
Processing triggers for menu ...
Errors were encountered while processing:
/var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Next thing I tried : apt-get dist-upgrade:
The following packages will be REMOVED:
libavfilter0
The following NEW packages will be installed:
libavcore0 libavfilter1 libavutil50 libva1
The following packages have been kept back:
libcairo2
The following packages will be upgraded:
ffmpeg libavcodec52 libavdevice52 libavformat52 libpostproc51 libswscale0 mplayer
Preparing to replace mplayer 2:1.0~rc3++final.dfsg1-1 (using .../mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb) ...
Unpacking replacement mplayer ...
dpkg: error processing /var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb (--unpack):
trying to overwrite '/usr/share/pixmaps/mplayer.xpm', which is also in package mplayer-gui 2:1.0~rc3++final.dfsg1-1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Processing triggers for menu ...
warning, in file '/var/lib/dpkg/updates/0006' near line 5 package 'libavcore0':
missing description
warning, in file '/var/lib/dpkg/updates/0006' near line 5 package 'libavcore0':
missing maintainer
warning, in file '/var/lib/dpkg/updates/0015' near line 5 package 'libavfilter1':
missing description
warning, in file '/var/lib/dpkg/updates/0015' near line 5 package 'libavfilter1':
missing maintainer
Errors were encountered while processing:
/var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
View 2 Replies
View Related
Jan 2, 2011
I've been having a problem with intermittent stuttering in video and audio playback since upgrading to Maverick (it also happened when I briefly installed Lucid). It started out as the odd skip every 20 minutes or so but now it can happen 5 or 6 times in 10 minutes when watching a film. I've tried:
reformatting and clean installing using a half-dozen players installing every codec I could think of (only after the normal ones wouldn't help) diangosing my 3 hard drives (the problem occurs on them all and they're not in a RAID setup) changing then changing back my video drivers disabling pulseaudio and ubuntuone-sync (these were not installed in my previous, working setup) looking at every relevant log file (mplayer, smplayer, demsg...) I know of running ubuntu's testing utilities I'm out of ideas. Going back to Jaunty is the only solution I'm pretty sure will work but it's not exactly ideal. It will be a few months a least before I'm able to install a completely new distro.
View 7 Replies
View Related
Apr 11, 2010
I am trying to install gnome mplayer and later mplayer codecs.script run
Code:
root@zorro:/home/siawacsh/Downloads/MPlayer/mplayer/slackbuild/gnome-mplayer# ./gnome-mplayer.SlackBuild
gnome-mplayer-0.9.8/
[code]....
View 16 Replies
View Related
Oct 17, 2010
can we upgrade lucid to maverick by using maverick live cd. what are the other methods for upgradation
View 3 Replies
View Related
Mar 3, 2011
This should be a very elementary question. I have a URL like http://SERVERNAME/file.wmv. When I enter it in "Open Location" in gnome-mpLayer it connects to the server and plays the stream. But when I run
mplayer "URL"
in the terminal I get a crazy endless loop of
Playing URL.
Resolving SERVERNAME for AF_INET6...
Couldn't resolve name for AF_INET6: SERVERNAME
Resolving SERVERNAME for AF_INET...
Connecting to server SERVERNAME[xxx.xx.xxx.xx]: 80...
Cache size set to 320 KBytes
I think my usage of mplayer in the terminal is correct, since I can watch other URL's.It's only this specific one that doesn't work (I am not authorized to write the URL because they want it to be private.So my question is: Does anyone know why I get this loop? Or is it possible to see how mplayer is called by gnome-mplayer and what output messages it generates?I use gnome-mplayer 0.9.9.2 and mplayer 1.0rc4-4.4.5 on Ubuntu 10.10.
View 1 Replies
View Related
Sep 29, 2010
i am trying to upgrade to ubuntu 10.04 from 8.04, and am getting this warning:"Upgrading may reduce desktop effects, and performance in games and other graphically intensive programs.This computer is currently using the AMD 'fglrx' graphics driver. No version of this driver is available that works with your hardware in Ubuntu 10.04 LTS.Do you want to continue?"should i continue? i have no idea what a 'fglrx graphics driver' is
View 4 Replies
View Related
Jan 9, 2009
ive had ubuntu 8.1 for awile now on my laptop and windows on desktop. ive downloaded lives media maker or movie maker what ever u widh to call it. after opening lives it says i need to download mplayer. i got to the mplayer homepage thur the downloads given here, and dont know what to do. never messed with binary or codes and dont want to realy mess things up. so looking for some advice here. how do i get mplayer on ubuntu?
View 3 Replies
View Related
Jan 27, 2010
I'm having a problem running Mplayer in Ubuntu 9.1. I've installed and uninstalled several times. Mplayer refuses to open from the applications menu.n I attempt to open from terminal it comes up with the following: mplayer: error while loading shared libraries: /usr/lib/i686/cmov/libavcodec.so.52: file too short I've also tried other players such as Gnome Mplayer to play the video and it plays really fast with no audio or video. This has really been the only problem i've run into since switching from windows to linux two weeks ago.
View 3 Replies
View Related
May 25, 2011
I've installed both mplayer and mplayer-gui packages, but I cannot find and launch mplayer with graphical interface. I want the classic mplayer's gui and seems that isn't there after installed. Doesn't appear ind applications on launcher and when I'm trying to run from terminal the mplayer-gui command I get the error:command not found. So, where is mplayer-gui and how to get it back. This problem doesn't exist in any previous ubuntu version.
View 3 Replies
View Related
Jan 23, 2010
I am trying to take advantage of VDPAU for playing video files with my ASRock ION 330. As far as I know, MPlayer and VLC both include VDPAU support. Ok then, I managed to make MPlayer work from the command line:
mplayer -vo vdpau -vc ffh264vdpau ./filename.mkv
In this way it plays a 720p content smoothly, with under 10% CPU use. Great!The problem is when I try to make this permanent, i.e., configuring the files ~/.mplayer/config and ~/.mplayer/gui.conf.This is what I have in there:
config
======
vo=vdpau,xv,
vc=ffh264vdpau,ffmpeg12vdpau,
[code]....
But still, when I open MPlayer from the menu, no matter what file I try to open it gives this ugly message:Error opening/initializing the selected video_out (-vo) device. With regard to VLC, I had no luck, although I am using the latest "1.0.3 Goldeneye" version, I don't know how to make use of VDPAU.
View 3 Replies
View Related
Apr 5, 2010
I opened MPlayer, two boxes opened, both a blank and will not close. System manager does not show it and "ALT-F2" typed xkill and clicked on bottom tray button does nothing. I opened second MPlayer and it closed but not first one.
View 2 Replies
View Related
Apr 10, 2010
After finished a partial update, the system automatically removed my dear Gnome Mplayer, when I try to install again, it says:
[Code]...
View 5 Replies
View Related
Jun 26, 2010
I think I've installed mplayer from svn and now I'm getting that annoying "broken package" pop-up. Is any way how to make Ubuntu to ignore this package? I've tried it to solve it by following:
Code:
user@mymachine:~$ sudo apt-get install -f
[sudo] password for jan:
Reading package lists... Done
Building dependency tree
[Code].....
View 3 Replies
View Related
Jul 18, 2010
I spend hours following a dozen different how tos to get wma, asf, and a techsmtih videos to play. I still can't play asf, or techsmith. The asf plays the video, but there is no audio. The Techsmith flashes the video every so often but the sound works fine. mplayer -vc help says the techsmith codec is working, but it is not.
Available video codecs:
vc: vfm: status: info: [lib/dll]
ffmvi1 ffmpeg working FFmpeg Motion Pixels [motionpixels]
ffmdec ffmpeg working FFmpeg Sony PlayStation MDEC (Motion DECoder) [mdec]
ffsiff ffmpeg working FFmpeg Beam Software SIFF [vb]
ffmimic ffmpeg working FFmpeg Mimic video [mimic]
[Code]...
View 4 Replies
View Related
Aug 21, 2010
A recent update to ffmpeg, in which I've learned was an upgrade to the restricted ffmpeg as opposed to the unrestricted default one that is in the official repos, has now made it unable for me to use mplayer or Devede. Reading up about this, especially from here: [URL].. I have learned it's a frequent problem when installing the restricted ffmpeg. Basically what Devede says at startup is:
Code:
Cant's find the following programs:
mplayer
mencoder
Devede needs them to work. If you want to use Devede, you must install all of them. Using the terminal to open mplayer (or mencoder), I get this error: mplayer: relocation error: mplayer: symbol codec_wav_tags, version LIBAVFORMAT_52 not defined in file libavformat.so.52 with link time reference From my research, seems as though the problem lies in libavformat52 not being installed (or removed) and libavformat-extra-52 is installed, which is the same thing, but because it's the restricted version, it is called something different. Anybody know if that is correct?
Also, checking up, libavformat-unstripped-52 isn't installed but available, so should I install that to replace the missing libavformat52, as when I sudo aptitude install libavformat52, it says it conflicts with libavformat-extra-52?
I installed libavformat-unstripped-52, which didn't conflict with the already installed libavformat-extra-52, just to see if it would basically just replace the missing libavformat52, which conflicted with libavformat-extra-52 and couldn't be installed safely, but after I did, nothing changed. I still get the same error with opening Devede and mplayer (or mencoder) in the terminal.
View 9 Replies
View Related
Nov 17, 2010
Running Lucid Lynx. VLC works fine but Xvmc output uses less CPU on my PIII 750 laptop and isn't supported by VLC. I installed Mplayer but I can't play anything from the Mplayer GUI. I get the message "FATAL: Could not initialize video filters (-vf) or video output (-vo)". The interface is all black so I can't see the controls. I installed Gnome Mplayer GUI and now I have different problems. Playing video files, including VOB files from a DVD works fine. Trying to play a DVD with or without menues does not. I followed the instructions at URL.... What could be wrong?
View 3 Replies
View Related
Nov 22, 2010
So I'm running Ubuntu 10.10 64-bit on an HP Mini 210-1190NR. Everything runs fine except mplayer. I installed mplayer from the repos but when I try to play a video I get no sound. I can't figure out why.
Here's the output:
Code:
mplayer star.wars.the.clone.wars.s03e10.720p.hdtv.x264-ctu.mkv
MPlayer SVN-r32636-4.4.5 (C) 2000-2010 MPlayer Team
160 audio & 350 video codecs
Playing star.wars.the.clone.wars.s03e10.720p.hdtv.x264-ctu.mkv.
Cache fill: 3.12% (262144 bytes)
[Code]...
View 4 Replies
View Related
Nov 27, 2010
I'm trying to use mplayer to stream some content from the net to my desktop. This worked fine the first time I did it (though failed dismally on all subsequent occasions. Now, the first umpteen times, I was behind a proxy. Now I am not behind a proxy, but mplayer still looks for the proxy settings. Why? I have changed the proxty settings in the network proxy (applied globally), in Firefox and every where else I can think of. I use the following command:
Code:
mplayer -dumpstream -dumpfile ~/Desktop/<desired_filename>.avi http://<source>.avi
and I'm told in response
Code:
Resolving www<proxy> for AF_INET6...
What gives? Why is mplayer trying to use a proxy, and how can I tell it not to?
View 1 Replies
View Related
Feb 22, 2011
I have this wma file that I want to play and I looked around and found alot of ways to make this happen. However, none has work for me. But first let me explain my problem. I have these wma files that just wont work but they worked once before. Now when I try to open the files all I get is some message that the file can not be opened. I have done many efforts to make it work including things like medibuntu. BTW, there was this once moment that when I tried to open the file it PLAYED! but then after it did not open.
View 3 Replies
View Related
Feb 1, 2010
what do i need to write to get the mediafile info from mplayer?
View 6 Replies
View Related
Feb 4, 2010
The DVD is mounted. From the console, I input "mplayer dvd://", and I receive the following output:
MPlayer SVN-r29237-4.4.1 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
[code].....
View 2 Replies
View Related
May 1, 2010
I've noticed a couple of times having comments about mplayer being outdated or that it needs updated since I installed Lucid a couple days ago. Anybody else having this issue? Or having trouble with mplayer?
View 9 Replies
View Related
May 14, 2010
There is a fix to enable the sound to be heard when realplayer plays rm files Is there a fix to enable sound in gnome-mplayer?
View 1 Replies
View Related
May 22, 2010
I have been searching for this rampantly and couldn't find any solutions for it anywhere...i installed mplayer successfully and now im trying to install mozilla-mplayer on lucid... and i keep getting the following error
sudo apt-get install mozilla-mplayer
Reading package lists... Done
Building dependency tree
[code]....
View 4 Replies
View Related