Quite a few times i have boot puppy linux live and have tried to copy file from the underlying NTFS windows HD only to get an error like permission denied when i try and copy a file to say a USB stick, i think some files copy but i seem to get permission errors with some files.
View 1 Replies
I am attempting to make a backup copy of a file, but every time I try to copy the file, I get a "permission denied error -- even when running as root. The file is on a volume mounted as /media/Data . No problems reading/writing other files on the volume.
Here is the info on the file:
-rw-------. 1 root MailServer.img
I've tried chown but get the permission denied as well. This is a virtual machine image that runs fine, but even with the VM completely shut down, I get the same error.
I am wondering why running this file:
Code:
-rwxrwxrwx 1 root root 1247 2010-04-21 18:25 autorun.sh
by issueing this command:
Code:
./autorun.sh
results in this message:
Code:
-bash: ./autorun.sh: Permission denied
I'm logged in as root and prior to the above I did a chown root:root on the file.
I have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:
mount -t nfs myHostName:/mnt/ltfs /mnt/data1
Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.
[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
I can't copy a few files from my pen drive. Got the files from a public computer, with windows. I use fedora 10.
cp gives the following error--->
cp const1.java /home/user1/Documents/scjp
cp: cannot open `const1.java' for reading: Permission denied
lsattr shows this--->
lsattr const1.java
lsattr: Permission denied While reading flags on const1.java
mount shows this--->
/dev/sdc1 on /media/disk type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
I have a written a java code to ftp a file from the windows box to unix box. It keeps giving me the following error : "java.io.FileNotFoundException: PORT 204,63,56,5,16,78: 550 Permission denied." I am able to ftp manually from windows to unix.
View 5 Replies View RelatedIm trying to move some files from my desktop to /usr/share/ProjectM Project M is a visualization program, and Im trying to move some presets I downloaded there. The error I get is
Code:
There was an error moving the file into /usr/share/projectM/presets.
Error moving file: Permission denied
I am logged in as administrator, why can't I move these files?
I have got centos 5.3 running on my system. I have installed vsftpd and created a separate folder to upload files (upload folder created in/var/ftp/pub). From my client end I can download ftp files but when I try to upload files from my client I get a error message 550: permission denied. The upload folder has full permission ie 777. Checked the ftp config file everything looks ok.
ftp config file
12 anonymous_enable=YES
15 local_enable=YES
27 anon_upload_enable=YES
Mount a Windows share where my user account has admin privileges. All permissions granted to the share on the windows pc side.Mount statement is as follows:sudo mount -t smbfs -o username=johndoe //winname/directoryname /mnt/tmp/Share mounts ok but does not let me create or write to an existing file. When I select Properties on the directory it says that permissions are unknown on the share looking at it from Ubuntu.
View 4 Replies View RelatedI'm trying to install Ubuntu on Windows XP as a dual boot using Wubi, but whenever I try to install it I get an error message that says: An error occurred: Permission denied For more information, please see the log file: c:docume-1lanzarolocals-1 empwubi-10.04.1-rev190.log Does anyone know what this means and if I can fix it?
View 7 Replies View RelatedI'm trying to install 10.10 but it keeps throwing an error. I'll include the error and log file below:
An error occurred: Permission Denied For more information, see the log file: c:...
I ftp into the server and see the files, but when i try to make a directory or upload a file it returns an error saying that permission is denied.I am wanting the users to be able to log on with their user account and then be able to have full control over their directories. What can i do to fix this problem?I have enabled port forwarding for ftp. What else is there i can do? If you need any extra information, let me know! I would like to get this fixed asap!Here is my vsftpd.conf file.
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
[code]....
I have a problem with uploading any file to my Suse 11.1 with vsftpd. The active (not commented out) settings in my /etc/vsftpd.conf are:
dirmessage_enable=YES
chroot_local_user=YES
local_enable=YES
anonymous_enable=NO
syslog_enable=YES
connect_from_port_20=YES
pasv_enable=YES
listen=YES
ssl_enable=NO
And I added umask 022 to the user login script problem I have: I login with user and password that exists as a local user on my suse machine. I can read and download from my homedirectory, but I cannot upload with filezilla. Then I get the error: 550 permission denied critical file transfer error
Im running Ubuntu 10.10 on my hp mini 110 netbook, have been for since i upgraded from 10.04. The problem Im having all of a sudden is when I try and copy anything from internal file system, to anything external [phone, card reader, usb hardrive] I get a pop up that says Error opening file '/media/disk/<filename>': Permission denied
Should be a quick fix i would think, what you guys got ???
I cannot get access to my external hard disk. It says as in the "SUBJECT" above. What should I do? I installed Debian XFCE testing.
View 5 Replies View RelatedI am trying to put a file from one linux machine to my other linux machine. There is absolutely no problem in downloading the file i.e. performing the "get" operation but when I try to upload or "put file" from my host1 to host2 it throws error "Error 0 Permission denied". I am able to put files from host2 to host1 without any problem but not from host1 to host. Infact if I try to tftp even localhost on host2 it throws the same error. Here is my
/etc/xinetd.d/tftp file for host2
service tftp {
socket_type = dgram
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args = -c -s /tftpboot
#disable = yes
disable = no
per_source = 11
cps = 100 2
flags = IPv4
}
And permissions on /tftpboot are 777
[root@LinuxServer /]# ls -ld /tftpboot/
drwxrwxrwx 2 root root 4096 Jan 6 05:21 /tftpboot/
[root@LinuxServer /]# ls -l /tftpboot/
total 16
-rwxrwxrwx 1 root root 11 Jan 6 06:16 new_test
-rwxrwxrwx 1 root root 12 Jan 5 06:02 test2
And the command which I am using is :
[root@LinuxServer /]# tftp localhost -c put new_test
Error code 0: Permission denied
And ya here is /etc/sysconfig/selinux file is as under :
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - SELinux is fully disabled.
SELINUX=permissive
# SELINUXTYPE= type of policy in use. Possible values are:
# targeted - Only targeted network daemons are protected.
# strict - Full SELinux protection.
SELINUXTYPE=targeted
I can't perform any of those.Except from the Terminal.I didn't edit any permission... nor installed anything.Don't know what to do.Also, "Move to Trash" appears grayed out, in the right-click menu (for all the files/folders).
View 8 Replies View RelatedRunning Ubuntu 10.04 I logged into (sudo?) (root?) using:
Code:
sudo -s
and then entering my password.
I navigated into the home folder and viewed the long listing of it's contents using:
Code:
root@host:~# cd /home; ls -l
total 4
drwxr-xr-x 65 uname uname 4096 2011-05-22 17:14 uname
[Code]...
Whenever i copy ELF or BIN files from the filesystem of linux i must get permission denied. For this case i have gone through the linux security module but didn't get much help regarding the permission denied only in case of copy of ELF and BIN files from filesystem. how can i proceed in this. WORK DONE:
1. Downloaded linux-2.6.25.14
WORK NEEDS TO BE DONE:
1. compile the kernel with some modifications in linux security module to get the desired results but this time i am unaware of that.
If I try the sudo mv command on the file listed below I get the error listed. I am confused. It is my file & I have permissions. Somehow a slew of files on my system are now showing this way. This seems to correspond when I ran rsync from my netbook to sync it up with my desktop where I am having a problem.
Potential Source ->
sudo rsync -av --delete --rsh=ssh joe@192.168.1.4:/media/Abyss/Memories/ /home/joe/Pictures/
Type of issue ->
mv: cannot remove `100_2259.jpg': Permission denied
joe@Tux-Box:/media/Abyss/Memories/2009/3-09$ stat 100_2259.jpg
File: `100_2259.jpg'
Size: 243012 Blocks: 480 IO Block: 4096 regular file
Device: 811h/2065dInode: 1312030 Links: 1
Access: (0777/-rwxrwxrwx) Uid: (1000/joe) Gid: (1000/joe)
Access: 2010-07-17 11:41:26.708020712 -0400
Modify: 2009-12-13 21:49:59.501938000 -0500
Change: 2009-12-24 05:54:02.854309200 -0500
I am importing my project to another machine on my LAN to the directory:
/srv/svn/repos/my-repo
where my-repo was created via svnadmin create option
The permissions of /srv/svn/repos/my-repo are
drwxr-xr-x 6 svn svn 4096 2010-04-19
17:30 my-repo
I executed following command to import myProject files to my-repo on remote system
sudo svn import -m "First import" myProject svn+ssh://baltusaj@192.2.12.133/srv/svn/repos/my-repo
This command started 'Adding' files but gave following error after 'Adding' 7 files
svn: Can't open file '/srv/svn/repos/baltoros-valgrind/db/txn-current-lock': Permission denied
I have two computers. One runs unRaid NAS software which is built on Linux. The other is running XBMC media center which is built on Ubuntu. XBMC has a local folder (/home/kevin/.xbmc/userdata/Thumbnails/) that it stores thumbnails in. I am essentially trying to move this folder to my server, but XBMC needs to see it as local. I started by deleting the old Thumbnails folder and it's contents. I then created an empty Thumbnails folder on XBMC and I also created one on my unRaid comp (192.168.1.20/disk7/xbmc_thumbs/Thumbnails). On the XBMC comp I run:
Code:
chmod 777 Thumbnails
mount -t cifs //192.168.1.20/disk7/xbmc_thumbs/Thumbnails Thumbnails
It creates the mount and as long as I'm logged in as root, I can copy files to the XBMC Thumbnails folder and they appear on my unRaid server's Thumbnails folder. The problem is that if I log in as kevin (the user that XBMC runs as) I get permission denied errors. I've tried changing ownership of the XBMC Thumbnails folder to kevin via:
Code:
chown -v kevin Thumbnails
And it says it changed it, but if I check, the ownership and group both still show as root. I'm thinking that may be because now that the mount is made, it's showing the ownership of the Thumbnails folder on the unRaid server? Whatever it's doing I can't seem to change it and XBMC can't write it's thumbnails because of this.
I'm trying to install Ubuntu 9.10 on my Windows Vista Home Premium machine. My specs far exceed the requirements to install, so I know there's no problem there.On installation I receive an error somewhat through that says something like:Quote:An error occured:Permission deniedFor more information, please see the log file:C:UsersUsernameAppDataLocalTempwubi-9.10ubuntu1-rev160.logSo.... I go to that file, and the last line in it is:Quote:OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-9.10-desktop-amd64.iso'I did run Wubi Installer as an Administrator, and unblocked it giving it full privileges.It's really annoying because my download speed is 80kb/s so it takes about 3 hours to download. During that 3 hours I can't use my internet so I have to wait, and wait, and wait, and then boom.error. And wubi can't pick up where it left off, you have to uninstall to reinstall, which sucks tremendously.
View 6 Replies View RelatedHere is a copy of my fstab # /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
[code]...
Code:
[serv@local subsys]$ rm -rf nagios
rm: cannot remove `nagios': Permission denied
[code]....
I am trying to create:
/etc/X11/Xsession.d/95xinput document
where
/etc/X11/Xsession.d is a folder.
So I enter the above commands:
cd /etc/X11/Xsession.d
nano 95xinput
I type my text and when I try to save it it says that permission is denied.
Trying to use tcpdump -r TEST, and get permission denied, even though I am logged in as root or super user. Tried using the "chmod a+rw TEST" (any other file for that matters, yes it came from another source) and get permission denied.
View 4 Replies View RelatedI Have been trying to change a file in filestarter using sudo /etc/rsyslog.conf. but am getting a permission denied message. How do I get into this file to change it ? Firestarter is working ok but for some reason it cannot open the system log. I Have found what amendments need to be made to get this to work but simply cannot get access to the file
View 2 Replies View RelatedI'm having a problem with my hard drive. Windows can't even open it. I run DSL linux and successfully moynted the drive so I can view my file structure. I thought I just connect my other windows HD, mount it and then just copy all the folders I need. Unfortunatelly I'm getting cp: cannot create directory blabla - read-only file system. Is there a way at all to copy NTFS files in Linux?
View 7 Replies View Related
