Debian :: Make A Connection To A Server With FTP Server From Vserver?

Jan 28, 2011

it is possible to make a connection to a server with FTP Server from my vserver? like the IP shown ond the FTP server is the ip from my vserver? Is this like a Socks5? is it possible? and if i download something from this FTP-Server to my home (the vserver is "between"), how big is the Traffic? is all the Traffic, wich i download, throught my v-server? (because i just have a few GB per month to download)

View 3 Replies


ADVERTISEMENT

General :: Lpq Printer 'sdst@other.domain' - Cannot Open Connection - Connection Timed Out Make Sure LPD Server Is Running On The Server

Mar 23, 2011

Linux printing appeared to be working fine up until yesterday. Today typing lpq gives the following: lpq Printer 'sdst@other.domain' - cannot open connection - Connection timed out Make sure LPD server is running on the server

The /etc/cups/printers.conf file is properly set, the printers appear in localhost:631 and they are printing test pages. However, all command line print commands seem to be trying to print to sdst@other.domain I don't know why printers.conf is being ignored and why and how sdst@other.domain was added. Seems like it might have been auto-discovered?

# dit: sdst@other.domain was mentioned in /usr/local/etc/lpd.conf I'm not sure why lpd.conf is being used instead of /etc/cups/printers.conf

View 1 Replies View Related

Server :: Heartbeat On VServer - No Access To Eth0

Feb 25, 2011

i have a root-server and a vserver.the vserver should provide services if the root-server is not reachable. i would like to configure heartbeat. its runnung on the root, but on the vserver i get an error: if i set the following in the ha.cf:

Code:

bcast eth0 # Linux

Code:

heartbeat[14629]: 2011/02/25_16:06:10 info: heartbeat: version 2.1.3
heartbeat[14629]: 2011/02/25_16:06:11 info: Heartbeat generation: 1298641135
heartbeat[14629]: 2011/02/25_16:06:11 ERROR: glib: Error setting socket option

[code]...

View 2 Replies View Related

CentOS 5 Server :: Install Libapache2-mod-php5 On A Vserver For Developer?

Dec 16, 2009

I try to install libapache2-mod-php5 on a vserver for our developer. But it does not work :
yum install mod-php5-apache2
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: mirror.newnanutilities.org

[Code]...

Is the name of the package changed or any other way to install it?

View 2 Replies View Related

Ubuntu Servers :: SSL Setup - Connection Error Unable To Make A Secure Connection To The Server

Feb 10, 2011

I am running an Ubuntu Server on a VirtualBox VM running on my windows machine. So I've created a self-signed certificate using the following tutorial: [URL]

From this tutorial I'm left with 3 files:
server.key
server.csr
server.crt

Then I found this very similar tutorial that has an extra bit on installing the certificates in apache: [URL] So I followed it's instructions which boil down to this:

[Code]...

So I'm thinking this should work now. However in Chrome I get: SSL connection error Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have. Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. IE8 gives me a typical "Internet Explorer cannot display the webpage" Note that [URL] fails while [URL] works fine, so it's definitely something in my ssl setup I'm thinking.

View 5 Replies View Related

OpenSUSE Network :: Can Make A Connection To Vpn Server, Connection Starts, But Nothing Happens?

Feb 2, 2010

I can make a connection to the vpn server, the connection starts, but nothing happens! My IP address remains the same as previous! There is nothing added to my Knetworkmanager, I'm a beginner I should use a pcf file for my vpn connection. I use it properly, I'm sure because the connection starts and an icon is added to my panel and remains until I disconnect.

I checked it via ifconfig -a, the last part (which is for vpn) is:

Code:
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:141.213.169.76 P-t-P:141.213.169.76 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1390 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0

View 2 Replies View Related

Server :: Connection Sharing Feature - Shared Connection To Server Closed

May 20, 2010

I'm a frequent user of the shared connection feature of SSH. Usually i have two or three connections open at the same time through the connection sharing feature, but sometimes when i try to start another i get the message "Shared connection to <server< closed". All the connection that are established through the connection sharing feature are still active and not closed, but when i try to create a new one i get that message.. i've even got that message when i have only had two connections through the shared connection feature.

I've tried to search google but it doesnt seem like anyone else has had the same kind of problem, does someone know why i sometimes get this error ?

View 1 Replies View Related

Debian Multimedia :: Connection Failed To Server

Jan 26, 2016

I'm working on getting a Debian box up and running for training labs for Cisco, and would like VNC access to this Debian box. My main laptop is a MacBook Pro, and I have a Windows 10 desktop.What the problem is: Using the MBP's built-in VNC viewer, I receive a "Connection failed to "Server" Make sure Screen Sharing or Remote Management is enabled on the remote computer. using Chicken (of the VNC), I receive a "The server refused the connection".I'm using tightVNC as a server on the debian box. This is a fresh install of Debian.URL...

View 8 Replies View Related

Debian :: Get Errors In That It Cannot Reach The Proper Url Or Connection To The Server?

Sep 16, 2010

I'm unable to install this package, tuxpaint.I get errors in that it cannot reach the proper url or connection to the server?Not sure what I'm doing wrong.I figure the repo is correct and I thought I had the proper source since I've installed other packages.What could be wrong?

View 1 Replies View Related

Debian :: Server IP - Remote Desktop Connection Failed

Jun 14, 2011

I want to connect to my Linux debian server, via Remote desktop connection, but when I give IP of my server and click connect, it fail, it says can't connect to the remote computer and below 3 reason.

View 3 Replies View Related

Debian Configuration :: Connection Closed By Server With Exitcode 141

Sep 4, 2011

setting up an SFTP server on debian, all the way down through step 3, though I did not "Match Group" I did Match User as I only need 1 user to have access to the SFTP server(did not continue on to step 4 and beyond as they did not apply to me) Im getting the error:

connection closed by server with exitcode 141

I get this when trying to log in via filezilla. I actually only got the 141 error on the first attempt, any attempts after that just says "could not connect to server". Username and password authentication goes through, so it is not a login info issue.Im running Debian squeeze, and that guide was for Lenny, that shouldnt matter, I dont think.

View 1 Replies View Related

Debian Configuration :: Make Mailboxes For Each Virtual Host On Server?

Mar 1, 2010

I'm using Debian 5 with Exim 4 on my VPS. My purpose is to make mailboxes for each virtual host on my server. What do I have: 1. Exim is set correctly - receiving mail from [URL]... is successfull. 2. Mail for [URL]... is delivered, and the mail for [URL]... too. But [URL]... is the site written to /etc/hosts (it's localhost), and [URL]... is virtual host. But mail from both boxes writes to /var/mail/mail. Now what do I need: 1. Make mail for [URL]... store in [URL].... and mail for [URL].. store in www/Maildir. 2. Make mailboxes like [URL].... to receive mail by Thunderbird. 3. Set passwords for [URL]... and [URL]... (I don't want to enter my system user/root passwords).

View 2 Replies View Related

Debian Configuration :: 7.4 64bit Network Connection Is Dropping On Server

Oct 16, 2015

We are having an issue where our network connection is dropping on our server. Everything was working for about a month without issues then suddenly we experienced a network outage. Here is what I found in our logs. Rebooting the machine was the only way to have everything come up.

Oct 16 09:20:59 server2 kernel: [2612816.936085] ------------[ cut here ]------------
Oct 16 09:20:59 server2 kernel: [2612816.936101] WARNING: at /build/linux-FpPMO6/linux-3.2.54/net/sched/sch_generic.c:256 dev_watchdog+0xf2/0x151()
Oct 16 09:20:59 server2 kernel: [2612816.936106] Hardware name: ProLiant DL380p Gen8
Oct 16 09:20:59 server2 kernel: [2612816.936110] NETDEV WATCHDOG: eth0 (tg3): transmit queue 0 timed out

[Code] ....

We have the same exact server, running the same exact debian version for over a year with no issues.

View 0 Replies View Related

Networking :: Random Network Connection Loss On Debian Server?

May 15, 2011

I have been having this problem for about two weeks now where Debian's network and internet connection randomly fails. It works perfectly fine and hosts all the services I need for a while, and then without warning all network connectivity fails. I can't ping any other network device. Regardless of how much I try to fix it, the only thing that works is restarting the computer. First, the server went 7 days without a problem; then 5 days; now it lasted 2 days. Judging from my Teamspeak server logs, it crashed today at 12:31. I grep'd through my log files and found this information:

[Code]...

View 6 Replies View Related

Debian Configuration :: Install A Multi-core System And Configure It To Run Several VMs, One Each For A Firewall, A Caching Proxy Server, A Mail Server, A Web Server?

Jan 25, 2011

I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.

In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).

View 14 Replies View Related

Server :: Make Two Storage Server Mirror Data In Real Time?

Jan 15, 2011

I have 2 servers each one with a RAID and I want them mirror they data so if one of them goes down the other one take the job with out disruption. I've heard of multipath by I want to know it in detail or learn of more options.

View 2 Replies View Related

Ubuntu Servers :: SSH Server - Connect To Server Via Port 443 I Get A Connection Refused Error?

Jan 7, 2011

I am merely trying to change the port for my ssh server.However it isn't changing.I edited my ssh_config file to:

Code:

# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for[code]...

When i try to connect to my server via port 443 i get a connection refused error. However when i try to connect via port 22 it connects. Since that didn't work, i tried restarting the entire server.To restate, i changed the config file and restarted ssh then the computer, however the port didn't change.Ohh and yes my router is set to port forwarding on port 443, though it doesn't matter since I'm inside the network.

View 2 Replies View Related

Server :: Remote MySQL Server Connection Dies After Wget Large File

Feb 3, 2011

We have 2 servers, 1 is the webserver and the other is the Mysql server.

When transfering a 2GB file from the webserver to the Mysql server.

The webserver's connection to the mysql DB server dies completely.

Need to restart the MYSQL process in order for it to come back online.

During this connection downtime, when using phpmyadmin on the mysql server shows no problem running queries etc.

View 2 Replies View Related

Server :: Configure System Vpn Server For Windows Clients And Roadwarriors Connection?

Apr 26, 2010

How to configure linux vpn server for windows clients & roadwarriors connection?

View 4 Replies View Related

CentOS 5 Server :: Configure A Mail Server Over A Home Internet Connection?

Feb 12, 2009

I have one server at home, connected through a router that gives me a static IP:192.168.1.2 - My PC192.168.1.3 - CentOS serverI enabled the port 80 into router forwarding system and I can connect properly to CentOS server, using the IP my internet provider gives me. My router automatically forwards a changed IP to my dyndns.com account so I can also access the server through a domain name (I pay to have it linked to one of my domains).My next step is to configure the mail server (dovecot) , so I can send emails from my local server(192.168.1.3).I was wondering if anyone has any tutorial links or tips to have the mail server configured through a home internet provider + home router.

View 5 Replies View Related

CentOS 5 Server :: Openssh 5.8p2 - Transfer Data From Other Server Through Scp It Gives Connection Refused?

Aug 1, 2011

I have configured openssh 5.8p2 with centos 5.6. My sftp is working fine with chroot environment but i am having problem with SCP. I am dealing with muliti Redhat servers. When i try to transfer data from other linux server through scp it gives connection refused. For e.g ssh 5.8 is configured on new server and i want to transfer files from old server which is using openssh 4.3 version.i created same username and password on new server as on old server.My sftp users on new server has no shell access but only sftp access. When i try to scp from old server to new server it gives error connection refused. Is the below configuration only for sftp and can't scp? According to google the configurations i found are for scp and sftp. Do i need to generate ssh keys by giving users on new server shell access, once created then stop shell access again, as i dont want to give shell access permanent for security reasons? but i want to use ssh keys for more security as well.

Port 22
PermitRootLogin no
1.override default of no subsystems[code].....

View 5 Replies View Related

Server :: Make Application Server That Would Contain Simple Ones Like Edit / Openoffice / Gim

Mar 16, 2011

I am trying to make an application server that would contain simple ones like edit, openoffice, gimp, so on and so forth. I know how to access these using ssh but what I want is that the application runs on that server as it already does, but to open local files and save them locally.

View 7 Replies View Related

Server :: Make Squid 2.6 Stable As Transparent Proxy Server?

Dec 22, 2010

I want to make a transparent squid proxy server in centos. The squid proxy version is 2.6 stable. I made a normal squid server but want to make it transparent so that users do not need to enter the proxy settings in web browser. Even i searched about this on google but not getting it properly.I have two lan cards on centos system. ETH1 used for LAN and ETH2 used for WAN. And in this squid.conf i written "http_port 172.16.31.1:3128 transparent" and i also added a rule in iptables which is "iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 3128" but still i have to enter proxy settings at client's web browser to use internet

View 4 Replies View Related

Server :: OpenVPN And Local Computers \ Cant Make A //server/SHARED?

Jul 6, 2010

i just one to emulate the windows 2003 - windows XP easy VPN deployment, with my ubuntu server.I got my server side (ubuntu) and client side ( openVPN gui) and everything looks okbut now, i cant make a //server/SHARED and get from my house to the office's docs, despite the conection its ok... whats wrong?

View 14 Replies View Related

Ubuntu Security :: Pgadmin3 Through Ssh Tunnel - Error Connecting To The Server: Server Closed The Connection Unexpectedly

Mar 1, 2010

I'm using Postgresql 8.4.2-2. I'm trying to remote into my server securely. I figure I could do so with ssh. Apparently I figured correctly, as per, [URL] and [URL] I setup the ssh tunnel. ssh -L 5432:serverip:5432 Then I setup pgadmin3 to connect as follows:

host: localhost
port: 5432
user: postgres
maintenance db: postgres

And I receive the following error:

An error has occurred: Quote: An error has occurred: Error connecting to the server: server closed the connection unexpectedly This probably means the server terminated abnormally before or while processing the request.

I'm not sure what the problem is. I can connect with Code: psql from the cli after connecting to the terminal via ssh. So I know that I'm using the correct password.

View 3 Replies View Related

Server :: Setup Home (1 Computer) FTP Server Using DSL Connection No Router?

Jan 21, 2010

I'm going to start a new thread because previous searches have not totally satisfied my question. I've read all day about doing this but each inquiry leads to discussion of configuring the router. I am also not network savy. I would like to set up an FTP server on my home computer (presently Ubuntu 8.10). I have only one computer. I am using DSL with my telephone line for internet connection. I do not use a router.

Is it possible to do this with no router and only a DSL ISP connection?

View 3 Replies View Related

CentOS 5 Server :: Server Unexpectedly Closed Connection While Using Putty?

Nov 4, 2009

was trying to access the server through putty, it immediately closed connection.i tried this a couple of times and still the same problem.

View 2 Replies View Related

CentOS 5 Server :: ERROR: Connection Dropped By IMAP Server

May 7, 2011

Whenever I try to login via SquirrelMail into my account I get this error message:

ERROR: Connection dropped by IMAP server.

View 1 Replies View Related

Programming :: Sms Server Tools Cross Compiling Sms Server Tool For An Embedded Computer And Make Just One Binary File For It?

Mar 27, 2010

I wanted to know how can I cross compile SMS SERVER TOOL for an embedded computer and make just one binary file for it or how can I change all of its default files places like its demon and object file and gather all of them to one directory to execute and use and run.let me explain it better for you : I have an embedded computer with Linux OS that its file system is read only and I can not add any file to /usr /lib and ..... and I can just mount a SD memory card to it and copy all of my programs to it and run them from there as you understand I have two choices to choose, first make one big binary file for each program that I am doing it now and it is not a suitable solution and the second is finding the way to change default place of shared object file of my program.now you tell me what can I do to solving this problem.

View 1 Replies View Related

Server :: How To Make MS Sever As One Of User Accounts Of Server?

Jul 15, 2010

I've been tried to be system admin, programmer, network admin, or network engineer. So, I've been studying this and that... what so ever struggling to find my talent. Back in 2007-2008, I was MS server admin/comm tech. I saw a building running MS server for user computers and Red Hat 9 as a main system server. MS sever was a just one of the user accounts of Linux server. When I log in to Linux, I could see log menu to access MS server. How could somebody make this creative thing?I'm now a Network engineer because working with CISCO router and switch is easier than working as programmer or server admin. I've studied Oracle 10 and VMWARE also but there are ceasless stuffs that I need to study... For now, in regards of my limited brain power, network engineer is proper for me.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved