Yesterday, after browsing for a while, my keyboard suddenly started to show different characters than typed. The keys are just typing different letters than pressed. For example, the j displays a 1, the k displays a 2, and so on. This only happens on the x server. On the terminal, before starting the x server, the keyboard works just fine.
I'm running Ubuntu 9.10.
I have added a Latvian keyboard layout to my Ubuntu 9.10 system (Russian as the system language). I cannot type Latvian letters with diacritical marks. I chose an apostrophe-based keyboard layout, so that I get the letter I need by pressing an apostrophe before. For example, to get ā, I would press 'a.The problem is, when I press ' followed by a letter or space bar, nothing appears on the screen. I continue typing as normal, but each time I press an apostrophe, the next character I press displays nothing on the screen. I have tried installing a Latvian language pack through System -> Administration -> Language Support. It was generally a useful addition. But it did not solve the problem. I still could not type Latvian. After that, I tried removing the Latvian layout from settings and adding it again. It did not help. I tried removing the layout, restarting my computer, and adding the layout back. The problem was not resolved.
I have tried different Lativan layouts (with tilde, with F, and standard). I had the same problem regardless of the layout I used. I browsed dozens of forum threads, and in one of them I found a workaround for this problem. For example, to type �, I hold down Shift and Control together, and while holding them press u0160 (because 0160 is a hex code for � in the character map). The first 0 is not significant, so to save time I type u160. I looked up the hex codes for the letters I need in Applications -> Accessories -> Character Map. In that application, at the bottom of the window, for each letter there is a code U+(four hex digits) e.g. U+012A. I wrote out all the codes I need on a small paper slip and stuck it to my monitor.Entering symbols this way is rather inconvenient. But at least it is possible.How to enter Latvian letters using just a Latvian keyboard layout? Is it a bug I should file? Would be great to find out.
I type characters with an overbar, like the NOT symbol in math, when in a linux SSH shell with no GUI?
View 3 Replies View RelatedI've recently purchased a VPS to run a private server on. I installed gnome and configured it to run on TightVNC to access from my home computer. Whenever I try to type certain letters such as a lower case "s" it instead accesses the shutdown menu at the top right corner. This is disabling me from finishing my server and downright frustrating.
View 3 Replies View RelatedI reinstalled Ubuntu after a disastrous install of gnome 3. I installed the mscore fonts etc. When I select a ms true type font I just see a row of squares instead of letters
View 2 Replies View RelatedAfter installing lots of stuff from the main repo (letters Q though U). I, apon starting to catalog the missing software that V-Z needed (and I did not have) I found that open office would not print letters on the screen. I tried rebooting (the computer)and reinstalling (open office is what I reinsalled) and nothing worked. I then tried to type on to a txt document using Kwrite and it wored at first then it started to type symbols and a pop up on the lower left showed the symbols then ABC etc. I clicked on ABC and Kwrite worked but open office did not. If it helps I installed some program that had to do whith typing python. I need to know the following
1:Is it a bug or my mistake?
2:How do I get open office up and running?
since today's update my keyboard is acting strange. Letters e a c b f d won't come out right. They show for example e. and then I can't type anything more except the same letter over and over, until the eeeeee transforms into some weird symbol, sometimes asking me to choose between several ones...already checked languages and keyboard settings, nothing will do...
View 9 Replies View RelatedWhen I use the down arrow on my new keyboard it also does and enter key as well. When I use the left and right arrow keys and hold them it doesn't keep going. It just clicks once and I have to pressing it over and over again. Any one know the correct settings to setup my keyboard? It's a Logitech Illuminated Keyboard.
View 2 Replies View RelatedI have a wireless keyboard and for some reason it is typing random letters, symbols, and numbers while I am not even touching the keyboard. I tried a different wireless keyboard and that worked for awhile, but even that started to do the same thing. I plugged in a cord keyboard and that has been working fine, but I am unable to type my password if it goes into sleep mode or select my windows partition. It's very confusing and I plan on reinstalling both windows and linux anyways it's that time, but I have to figure this problem out before I do.
View 2 Replies View RelatedI've been using using Ubuntu and Arch with gnome for ages, but after the whole gnome3 and unity hubub, I decided to go with kde and openSUSE. and I'm completely loving it. However, I have one problem Ubuntu (gnome) has the option to choose the Faroese keyboard layout, but in openSUSE with kde, it's not an option. Now I really need to be able to write a lot, so I need the regular Faroese layout, otherwise I'm missing the letter "ð". openSUSE should really implement Faroese into the keyboard layout options
View 4 Replies View RelatedI recently built my first computer which has Debian Jessie running on it.
Everything was running great until I updated the computer a few days ago. After doing that and turning it on a few hours later, the keyboard started missing letters (as in it wouldn't register every key click) and was also typing some letters over and over again. It seems that it doesn't matter what key I press, the same problem occurs.
I tried using the keyboard on my laptop; it worked perfectly. I also tried connecting up another keyboard I had laying around and that seemed to have the same issue. Both keyboards are mechanical.
I have lirc but I haven't got the hang of it yet. Ive have made a lircmap.xml and put that file in /.xbmc/userdata but xbmc still doesn't respond to it. I have even tried /.xbmc/userdata/keymaps and nothing. You can say that I have lost faith in lirc. I there a program that can translate remote control signals to regular keyboard letters?
View 1 Replies View RelatedI have XFCE and xorg-server-1.7.7 in slackware64-13.0. I have my keyboard set up in xorg.conf. X ignores that and takes info from hal. So I have a US keyboard, when I have a UK/IE keyboard actually. When I added openoffice, i found I was getting double letters am getting double letters all over the place, and the cursor blink has slowed too near zero. So when I want to remove them again, the mouse will not land the cursor in the middle of a word to delete the extras. An average of 3 double letters are happening each line. Mouse sometimes works to remove them, usually not. I have set 'repeat delay' at maximum, 'repeat speed' & 'blink delay' at minimum. No effect. Disabled key repeat - still happens.
View 5 Replies View RelatedRecently I faced a problem in typing in English in OpenSuse 11.3.When I try to type in English it shows me Greek letter and worse than that I think it is really Greek (not only in font) because when I enter my passwords or try to type a command in terminal I get error,I tested with UK and USA and all other English languages and I still have this problem. I even do reset in my keyboard layout setting and in KDE setting but it didn't help.
View 3 Replies View Relatedhow can i control vlc via the keys above my keyboard(my english sucks and i have no idea what they are called, meta keys? multimedia keys? whatever)only MPlayer responds to them, not vlci opened vlc preferences window and in hotkeys page, i wanted to add the "PLAY KEY" to "PLAY/PAUSE" but it wouldn't even recognize the keys, nothing happens when i press them, but it would recognize something else ,like
View 2 Replies View RelatedI could not find any way to enable dead keys on my keyboard on Lubuntu 10.04 via gui.I created xorg.conf by using X -configure command and tried to add followings into /etc/X11/xorg.conf but it did not work.
Code:
Section "InputDevice"
Identifier "Keyboard0"
[code]...
I have set my Keyboard as listed in the tile and it work great with one drawback, When typing in Espańol I can not get the inverted ?. I have looked on the Keymap under Latin with no success either.
View 5 Replies View Relatedlive in the German speaking part of Switzerland and therefore a Swiss German keyboardThere are only 3 different keyboard layouts: Switzerland, Switzerland eliminate dead keys/sun keysThe problem is: I desperately need the dead keys to type the be ?rall of the layouts have the dead keys eliminated so the only way is to use caps lock, but that's not all that great.
View 4 Replies View RelatedI've noticed that my field keys don't work on my iMac. The eject key works, but if I try ALT+F2 I get nothing. I there something I need to reconfigure to get my keyboard full functioning?
View 2 Replies View RelatedEverything has been fine until tonight - updates have always ran ok. Automatic update screen appeared tonight so ran it as usual.
Now the keyboard layout is all wrong, ie backspace key puts a 5 in rather than go back a space, enter key puts / and spacebar moves 2 spaces also numbers on the right are not correct despite number lock on as usual. What happened to the settings and how can reset keyboard settings.
They do work sometimes but then after a while, they stop working completely. I'm not sure why...
View 2 Replies View RelatedI am running 10.10 on a few deferent machines, and my problem is this, My son's name is Sren I am using a U.S. keyboard and can't seem to figure out how to configure it to make the on mac it is option+o and on win it is alt+0248. but there does not seem to be any easy way to set this up in Ubuntu. for now I have to google his name then cut the out and paste it where it should be,
View 2 Replies View RelatedAfter one of latest update I have problem with meta keys (like shift, ctrl and alt) in KDE. When I press one of this keys, it sometimes stays active after release and deactivates only after I press it again. It's annoying especially while I'm writing some code (php or html) and meta keys randomly stays active after release.
xorg.conf:
Code:
For example I want * key to print #. I searched some Web pages about it but information was too complicated and I should learn about it. Do I have to if I just wanna change some keys?
View 4 Replies View RelatedIs it possible within Linux to program Ctrl + 1 to type my name and address? If so, how?
View 3 Replies View RelatedI'm using Ubuntu 9.10. All of a sudden several of my function keys stopped working and several keyboard shortcuts that I had setup involving function keys stopped working as well.
For example, when I go to preferences->keyboard shortcuts and try to set "Toggle fullscreen mode" to Alt+F11, the text "XF86AudioRaiseVolume" appears where it should just say "Alt+F11". Pressing Alt+F11 does nothing.
All of my function keys somehow got mapped to XF86AudioBlahBlah and no longer work. How do I undo this? I recently installed ffmpeg and gtk-recordmydesktop but I don't think I installed anything else.
I have updated to 10.10 and now my ir remote is simulating keyboard arrow keys which is causing problems in applications like Boxee. The weird thing is if I stop lircd it still simulates the keyboard arrow keys.
Does anyone know how to stop the keyboard arrow keys from triggering when the ir remote up, down, left or right buttons are pressed?
(Here are all the IR config files)
hardware.conf
Code:
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Streamzap PC Remote"
REMOTE_MODULES="lirc_dev streamzap"
[Code]....
When I go to type in a response to a forum post (in the box you are reading this in if you reply) I lose keyboard input. Nothing happens when I type. If I go up to the upper right hand corner of the message box and Switch Editor Mode then I get the keyboard back.
View 3 Replies View RelatedI got Sun Type 5 Unix keyboard which uses mindin-8 connector, attached to a PC through a special adapter which converts it to USB. The keyboard's distinctive features are Control key in the middle row (swapped with Caps Lock which makes it a Unix layout - much more comfortable for the pinky) plus a whole bunch of extra Sun keys, including such useful ones as "Copy", "Paste", and volume control. (Sun Type 5 keyboard has very good feeling to its keys, much better than Type 7 one).Those extra keys work as expected with this adapter in Gnome on OpenIndiana (OpenSolaris previously), but aren't supported out of the box on Debian. Looking around I didn't find any good up to date tutorial how to enable them on Debian or any other Linux. Did anyone try to do it?
View 5 Replies View RelatedI found this:Software.openSUSE.orgIt's supposed to make G keys work and make them programmable, but i don't know if it'll work for G11 keyboard...Did anyone manage to get the G11 macros to work in Linux?I'm using openSUSE 11.2. 64 bit.I tried searching in YAST for some drivers or something, but couldn't find anything...
View 1 Replies View Related
