I've noticed that my field keys don't work on my iMac. The eject key works, but if I try ALT+F2 I get nothing. I there something I need to reconfigure to get my keyboard full functioning?
View 2 RepliesI have Karmic Koala 9.10 working (near) perfectly on my iMac7,1, as identified by
Code:
NOTE: See below for Lucid 10.04 update to these instructions
IMPORTANT: You need to complete the installation procedure while connected to internet via the WIRED network. Then you can enable the wireless by installing the restricted drivers, after the install is complete. Also the fglrx ATI Video driver is effortlessly installed via Menu > System > Administration > Hardware Drivers
The sound card gave me some trouble, as it is an Intel HDA Model, reported as 'Codec: Realtek ALC889A' by
Code:
It shows up in lspci as:
Code:
It sounded rather tinny at first, when I tried mbp3 and other model names. Then I added the following line to /etc/modprobe.d/alsa-base.conf :
Code:
After reboot, my sound is full and can be put much louder than before. Jack detection works. Some people might have to leave out the power saving options. See below.
dmesg reports:
Code:
Sources consulted are mostly the kernel documentation ( Enter into the terminal: sudo apt-get install linux-doc
The relevant info can be found in HD-Audio-Models.txt.gz and HD-Audio.txt.gz in /usr/share/doc/linux-doc/sound/alsa )
Neither Ubuntu's Unity or KDE respond to the function keys on a regular Apple USB keyboard. I can plug in a non-Apple keyboard and they work just fine. What needs to be changed or configure so that F1 and company on the Apple keyboard work as on other keyboards?
View 1 Replies View RelatedScreen brightness on aluminium 24 inch Intel iMac
I was just about to re-install Ubuntu to dual boot with OS X on my 24 inch aluminium Intel iMac. Then I remembered the reason I got rid of Ubuntu the last time... screen brightness.
It is a known fault of these machines - the default brightness is set far too high. Sometimes it hurts the eyes. There is an application I have to use with OS X called 'shades'.
If I instal Ubuntu in VirtualBox I can still use 'shades', but when I run it natively as a dual-boot os, I do not have access to the 'shades' app so the screen is far too bright to use for any reasonable length of time.
Is there a workaround for this, without having to do something on every log-in?
(I am using the 64 bit AMD version of Ubuntu.)
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like
[code]...
On the mbp 5,3 running 10.04, I'm trying to get the screen dimming keys working. Using the tutorial [URL] I followed the instructions for the nvidia-bl-dkms package. Initially upon configuration, the dimming keys work wonderfully, but after a restart, they don't work at all.
View 3 Replies View RelatedThey do work sometimes but then after a while, they stop working completely. I'm not sure why...
View 2 Replies View RelatedI'm using Ubuntu 9.10. All of a sudden several of my function keys stopped working and several keyboard shortcuts that I had setup involving function keys stopped working as well.
For example, when I go to preferences->keyboard shortcuts and try to set "Toggle fullscreen mode" to Alt+F11, the text "XF86AudioRaiseVolume" appears where it should just say "Alt+F11". Pressing Alt+F11 does nothing.
All of my function keys somehow got mapped to XF86AudioBlahBlah and no longer work. How do I undo this? I recently installed ffmpeg and gtk-recordmydesktop but I don't think I installed anything else.
I'm having trouble getting keyboard volume keys working with lxde. I have tried a couple of methods found on another forum, but they did not work
View 4 Replies View RelatedI've been making some progress with my new Dell Inspiron n5110 and the OpenSUSE 11.4. After searching through the net I found some drivers to get my laptop going. Now I'm facing the following problem: I want to adjust the audio volume using a special key combination on my laptop(fn+F11 to rise, fn+F12 to lower, and another key that works as mute). Although the sound itself works fine, when I use these keys the have no effect on the volume. It stays exactly the same. Some I ask myself are the drivers for the sound card installed? In "Playback Devices" there are two devices: Internal audio analog stereo(which is the one that is working) and GF108 High Definition Audio Controller Digital Stereo(HDMI). The lsusb provides:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 8086:0189 Intel Corp.
Bus 001 Device 004: ID 1bcf:2880 Sunplus Innovation Technology Inc.
Bus 002 Device 003: ID 0bda:0138 Realtek Semiconductor Corp.
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
So I searched for some Realtek drivers and came up with nothing. If you have any idea on how to get my audio running or how to make the special keys working, please let me know!
1) Keyboard number keys on the right side, including backslash, plus, minus, etc. stopped working. The rest of the keyboard seems okay. It's not just this keyboard, either, because I plugged in my other keyboard and it has the same problem.
2) My mouse seems to have an intermittent problem in which it stops working for a few seconds or a minute. I can move it around the screen but I'm not able to click on anything. Sometimes if I wait long enough, it returns to normal. If I logout using the keyboard commands and log in again, it seems okay, at least until the next occurrence.
I'm running 10.04 LTS Lucid Lynx. I installed a kernel update a couple of weeks ago (2.6.32-29) but I've gone back to -28 in the hope that it would solve the problem. It has not. Is there a software package I need to reinstall or some other way to revert keyboard and mouse settings to defaults?
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like URL...
View 1 Replies View RelatedI set up my Mac Mini to dual boot Windows 7 and Ubuntu. I started with Windows only, and allowed it to rewrite the partition table (GPT/MBR). When I tried to install Ubuntu, it didn't see Windows until I used Gdisk to delete the GPT portion. Then it recognized the Windows partition and installed Ubuntu as per normal. Now when I boot, I get GRUB and the option to boot Ubuntu or Windows 7. The only problem is that the USB keyboard (Aluminum or standard PC keyboard) doesn't work until an OS is loaded.
Is this an EFI problem? I'm starting to think that EFI is required for USB keyboard support at bootup since it replaces the BIOS functionality. Is this even remotely accurate? Did I mess things up by not going the rEFIt route? I'm not sure what I can do at this juncture as I can only boot into Ubuntu.
I could install OS X, rEFIt, then Windows and Ubuntu, keeping rEFIt as the boot loader, but if there's an easy solution I'd like to avoid that. More importantly, I'd like to understand what's going on.
I upgraded to 10.04 on my Macbook and everything was working fine. Now, my keyboard isn't working at all. I didn't do any system tweaks or anything.
View 9 Replies View RelatedMy keboard was working perfectly (backlight, inverse FN) until upgrade from karmic to lucid. Now neither backlight neither inverting FN (in pommed.conf) works- backlight is always off, FN is default OSX-like.
Trackpad worked "almost superb" (missing click with one finger and drag with another!!) but after upgrade (=no mode udev) event number changes with every reboot so I cannot put configuration based on /dev/input/eventX to Xorg.conf. How can I make it have the same number after reboot now?
When I use the down arrow on my new keyboard it also does and enter key as well. When I use the left and right arrow keys and hold them it doesn't keep going. It just clicks once and I have to pressing it over and over again. Any one know the correct settings to setup my keyboard? It's a Logitech Illuminated Keyboard.
View 2 Replies View RelatedThis morning I bought an Apple wireless keyboard and I got it connected through Blueman. It works like a charm, but I have on problem;
When I log out I can log back in by typing in my password. However, when I restart the computer it seems that bluetooth is not loaded yet and I cannot enter my password. So I have to log in using my wired keyboard, and then disconnect & re-connect to my wireless keyboard using blueman before I am able to use the wireless keyboard.
Is there any way that I can already auto-load bluetooth and connect to my keyboard before I log in?
i have not been able to get my hot keys and right clicking to work, i have installed pommed i have a 8,2 macbook pro
View 4 Replies View RelatedI am dual-booting Karmic/OS X. I have a MacBook Pro 5,1. When using the keyboard to change the backlight, the graphic in the top left does move to indicate a higher brightness (albeit, it moves extremely slowly).
I, of course, have all the necessary drivers installed.
I have all the packages I needed from the Mactel repository. This has been a problem within Karmic since I've put it on my MBP. There have been several updates from the Mactel repository concerning the Nvidia backlight package (I don't remember exactly what that package is called though). I hope each time that it will fix what is going on, but obviously, it hasn't.
Is there any program that I could use to otherwise change the backlight? When I'm sitting outside it's really difficult to see what's on my screen as it also doesn't automatically respond to the change in environmental brightness by making the screen brighter.
I'm using ubuntu 10.04 on mbp 5.1 and change of FN/F behavior after _EVERY_ kernel update is getting really ridiculous.On update "a", I gey F-keys without FN; after upgrade to kernel "b", I get media keys by default, then again F,...I _really_ don't want to change pommed.conf after every reset (and re-reset it)
View 2 Replies View Relatedhow can i control vlc via the keys above my keyboard(my english sucks and i have no idea what they are called, meta keys? multimedia keys? whatever)only MPlayer responds to them, not vlci opened vlc preferences window and in hotkeys page, i wanted to add the "PLAY KEY" to "PLAY/PAUSE" but it wouldn't even recognize the keys, nothing happens when i press them, but it would recognize something else ,like
View 2 Replies View RelatedI could not find any way to enable dead keys on my keyboard on Lubuntu 10.04 via gui.I created xorg.conf by using X -configure command and tried to add followings into /etc/X11/xorg.conf but it did not work.
Code:
Section "InputDevice"
Identifier "Keyboard0"
[code]...
Yesterday, after browsing for a while, my keyboard suddenly started to show different characters than typed. The keys are just typing different letters than pressed. For example, the j displays a 1, the k displays a 2, and so on. This only happens on the x server. On the terminal, before starting the x server, the keyboard works just fine.
I'm running Ubuntu 9.10.
I have set my Keyboard as listed in the tile and it work great with one drawback, When typing in Espańol I can not get the inverted ?. I have looked on the Keymap under Latin with no success either.
View 5 Replies View RelatedI had a thread about installing on a Mac and decided to go the VirtualBox route and everything is running splendidly EXCEPT for the fnmode setting in /sys/module/hid_apple.
The problem is that the directory hid_apple does not exist for me to modify the settings for the apple keyboard. I'm assuming that when installing in VB, Ubu assumed it was a PC. Anyone know of a way to get the keyboard config directories in there so I don't have to hit Fn to do Alt-F2? Also, I tried to create the directory (sudo mkdir) and it returned "Cannot create directory...no such file or directory", but not in so many words.
live in the German speaking part of Switzerland and therefore a Swiss German keyboardThere are only 3 different keyboard layouts: Switzerland, Switzerland eliminate dead keys/sun keysThe problem is: I desperately need the dead keys to type the be ?rall of the layouts have the dead keys eliminated so the only way is to use caps lock, but that's not all that great.
View 4 Replies View RelatedEverything has been fine until tonight - updates have always ran ok. Automatic update screen appeared tonight so ran it as usual.
Now the keyboard layout is all wrong, ie backspace key puts a 5 in rather than go back a space, enter key puts / and spacebar moves 2 spaces also numbers on the right are not correct despite number lock on as usual. What happened to the settings and how can reset keyboard settings.
After one of latest update I have problem with meta keys (like shift, ctrl and alt) in KDE. When I press one of this keys, it sometimes stays active after release and deactivates only after I press it again. It's annoying especially while I'm writing some code (php or html) and meta keys randomly stays active after release.
xorg.conf:
Code:
For example I want * key to print #. I searched some Web pages about it but information was too complicated and I should learn about it. Do I have to if I just wanna change some keys?
View 4 Replies View RelatedIs it possible within Linux to program Ctrl + 1 to type my name and address? If so, how?
View 3 Replies View Related