I am running 10.10 on a few deferent machines, and my problem is this, My son's name is Sren I am using a U.S. keyboard and can't seem to figure out how to configure it to make the on mac it is option+o and on win it is alt+0248. but there does not seem to be any easy way to set this up in Ubuntu. for now I have to google his name then cut the out and paste it where it should be,
View 2 RepliesWhen I go to type in a response to a forum post (in the box you are reading this in if you reply) I lose keyboard input. Nothing happens when I type. If I go up to the upper right hand corner of the message box and Switch Editor Mode then I get the keyboard back.
View 3 Replies View RelatedYesterday, after browsing for a while, my keyboard suddenly started to show different characters than typed. The keys are just typing different letters than pressed. For example, the j displays a 1, the k displays a 2, and so on. This only happens on the x server. On the terminal, before starting the x server, the keyboard works just fine.
I'm running Ubuntu 9.10.
The title says it all. I'm trying to install Ubuntu 9.10 on my PS3, but the keyboard isn't typing. I can't complete the install, because I can't type anything. I've followed all the steps properly, everything goes smoothly, the mouse works just fine, and the capslock and numlock lights light up on the keyboard, and toggle when I press the corresponding buttons. The keyboard even works at the kboot prompt. After I choose the partition to use, I have to enter my information to continue. Without being able to type, I can't progress. The keyboard obviously works, since I can type just fine at the kboot prompt.This one's got me scratching my head. I'm going to try a 9.04 cd tomorrow, see if that works, but I was really hoping to get 9.10 on there.
View 8 Replies View RelatedMy current keyboard settings are not handling accents and umlauts properlye.g. I get "�e�a�o" instead of "� � �"How can I change the keyboard type from what was chosen during the installation?
View 2 Replies View RelatedI have added a Latvian keyboard layout to my Ubuntu 9.10 system (Russian as the system language). I cannot type Latvian letters with diacritical marks. I chose an apostrophe-based keyboard layout, so that I get the letter I need by pressing an apostrophe before. For example, to get ā, I would press 'a.The problem is, when I press ' followed by a letter or space bar, nothing appears on the screen. I continue typing as normal, but each time I press an apostrophe, the next character I press displays nothing on the screen. I have tried installing a Latvian language pack through System -> Administration -> Language Support. It was generally a useful addition. But it did not solve the problem. I still could not type Latvian. After that, I tried removing the Latvian layout from settings and adding it again. It did not help. I tried removing the layout, restarting my computer, and adding the layout back. The problem was not resolved.
I have tried different Lativan layouts (with tilde, with F, and standard). I had the same problem regardless of the layout I used. I browsed dozens of forum threads, and in one of them I found a workaround for this problem. For example, to type �, I hold down Shift and Control together, and while holding them press u0160 (because 0160 is a hex code for � in the character map). The first 0 is not significant, so to save time I type u160. I looked up the hex codes for the letters I need in Applications -> Accessories -> Character Map. In that application, at the bottom of the window, for each letter there is a code U+(four hex digits) e.g. U+012A. I wrote out all the codes I need on a small paper slip and stuck it to my monitor.Entering symbols this way is rather inconvenient. But at least it is possible.How to enter Latvian letters using just a Latvian keyboard layout? Is it a bug I should file? Would be great to find out.
I am using an external USB keyboard to my laptop. Suddenly (after using this keyboard for 6 months), some randomly times I need to press the button 6-7 times before something appears on screen. This happens randomly, I may be able to type a whole paragraph without problem, and suddenly I can't type anymore for few seconds. My system is opensuse 11.3 and it happened last friday 9/10 ( if it is related to any update). I tested the keyboard to another pc and it is working. I tested another keyboard to my laptop and I still have the same problem.
View 1 Replies View RelatedSince yesterday I have been having a strange and fairly aggravating keyboard problem. For some reason I am sometimes unable to type upper-case characters. My shift key doesn't behave normally. If I type shift-C, for example, nothing happens; if I try it several times, sometimes the character will eventually appear, sometimes preceded by a ) character. What's worse, some key combinations, such as shift-I, kill the brightness on the screen. After this happens a couple of times, the mouse freezes, and only a reboot will restore it. This does not seem to be remedied by logging out of the session (either gnome or KDE) and into another session. The problem seems to affect both desktop environments.
This problem seems to be intermittent. For example, it seems to be working normally now, but about five minutes ago GNOME gave me a bug reporting window on boot and informed me that the keyboard-switcher panel applet had crashed. I have tried exciting to a console with ctrl-alt-F1 while my keyboard is behaving in this way, and have found that my keyboard does not work correctly in the console either.
I would normally use several keyboard layouts as I need to write in several languages, but I have turned them all off and reset the keyboard control panels to defaults in both environments, and I am still experiencing the problem.
[Code]..
Am carrying out installation of CentOS-5.5 on a Sun fire X2270 server using PXE. The installation starts well but on getting to the keyboard type the installation halts. I have plugged in a USB keyboard unfortunately, am unable to select the keyboard type even on reboot as the keyboard is non-responsive.
View 2 Replies View RelatedI use KDE since 4.4 so far with minor bugs, now on latest version my keyboard recuse to type the backslash '/' using Portuguese- Brazilian Layout, but the interrogation carachter '?' type fine...strange it works on 4.5, 4.4 and Gnome 2, but updating to KDE 4.6 its stopped working...
PS: I already set to Country:Brazil and Languages Portuguese and US, and in Yast/Languages Portuguese and US are set to default and secondary languages...
How to bring the "Type to search..." window into focus directly, not by switching to the "Windows view" first?Anybody knows the relevant keybord shortcut? I went though at a number of introductions to GNOME 3, and also examined various tabs at:
Code:
User
> System Settings
[code]...
In my system around 73gb(pc-desktop) i have,1 primary partition(windows)-25gb, 1-extended partition(remaining gb) 3 logical partitions were there in (under) extended partition in one of the logical partition is d:drive. in my hard disk d: drive is -/dev/sda5
previosly i was fat -file system , (d:drive-/dev/sda5), i remember i changed the d: drive(d:drive-/dev/sda5) file system to ext4file system ,with following command using terminal
After doing(changing the file system)this one ,i couldnt see the d:drive data
By doing that
1q) Did i reformatted the partition? i think the new filesystem(ext4) has no knowledge of the data that was on it when it had a FAT filesystem.
2q) How to do undo operation,i tried to change the filesystem type to fat/ntfs in terminal using command --sudo mkfs -t FAT /dev/sda5.
Result:its showing text message-'mkfs.FAT: No such file or directory'(not in single quote)
I had very imp data in d:drive
I just loaded octave. I ran through a few examples of how to implement a script file. Everything works until I get to "plot". When I run the "plot" command I get the following.
octave:2> test1.m
error: can't perform indexing operations for <unknown type> type
sh: gnuplot: not found
Just to double check my work, I ran the following code:
y=[1 2 3];
plot(y);
I am copying the file form one directory to another directory using shellscript.
Here i want to get the Mimetype/Content-type of the file.
How to i can get the MimeType.
I have a server hacked when i try to log in i type root but won't let me type a passwdthere are no services up, can't see page mail nothing
View 11 Replies View RelatedI'm trying to compile a program and it gives me the following:
I checked cmath-util.h:46 and cmath-util.h:48:
I'm not a C person, and the author is unavailable so far.
I am trying to generic way to convert the string datatype to other primitive data type. To achieve, i used Template . But i getting error and couldn't resolve the issue and error reported is also clueless.
Code
====
#include <vector>
#include <iostream>
#include <string>
[Code].....
I defined a variant to my keyboard layout (Italian) editing the file/usr/share/X11/xkb/symbols/it and adding this block:
Code:
partial alphanumeric_keys
xkb_symbols "itaro" {
[code]....
Computer: Toshiba Satellite Pro L510 laptop, 10.10.This has always happened but I have gotten around it by time-out and putting my menu.list in order. When I first boot the machine (switch on for the day from computer being off) I get to the grub options to select a kernel and I have no keyboard. No up/down arrows so have to go with the kernel on top of the list (not always desirable).
When I get to the log-in screen if I hit restart and go back to the grub screen I have a keyboard and can select any kernel. If I login to the kernel I have full keyboard, no problem. If I then restart, I have keyboard at the grub list.
Nutshell: It is only when starting the computer fresh that the keyboard is dead at grub menu (and then only). Any time after that, once the computer has been switched on, if I restart I have keyboard at grub menu and can select different kernels. (Of course, if I switch the computer off and back on again, no keyboard ...)
I'm a used Ubuntu user on a pc, and I like the french keyboard layout because it allows me to type accentued characters easily.I found a win-fr keyboard layout but it's much like windows and not so good.I found xmodmap.fr keyboard layout and I'd like to know if it was possible use it with my Mac SL 10.6.5, maybe I could do xmodmap xmodmap.fr or a way to convert to mac layout file.
View 1 Replies View RelatedRecently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
View 2 Replies View RelatedI'm trying to install slackware 32 bit 13.1.After loading kernel it asks for keyboard configuration, but keyboard (usb wireless) doesn't work.
Keyboard works on the old 13.0 installation, on bios and also in the boot options of 13.1 installation cd.
I've tried removing legacy usb support and changing usb2.0 speed from high to full. Nothing changed.
Anybody with this strange problem? (kernel of setup seems also to detect it correctly as a trust keyboard).
When I use the down arrow on my new keyboard it also does and enter key as well. When I use the left and right arrow keys and hold them it doesn't keep going. It just clicks once and I have to pressing it over and over again. Any one know the correct settings to setup my keyboard? It's a Logitech Illuminated Keyboard.
View 2 Replies View Relatedhas bash a command that reads the keyboard status and exits? I want to write a loop of this form:
Code:
while [ 1 ] do
sleep (1)
[code]....
I have upgraded my laptop to 10.04 while having my usb-keyboard plugged in.f I boot the laptop without a plugged in keyboard, the laptop keyboard is not working. It starts working as soon as I plug a usb-keyboard in though.Quite annoying if I take my laptop with me and the first thing after booting is to find a usb-keyboard to plug in Does anyone know where can I reconfigure this? [edit]I just found out, that the laptop keyboar seems to be in numlock mode... meaning that the keys [j,k,l] is mapped to [1,2,3] etc
View 2 Replies View RelatedSo last night after I got home from the bar I got on my laptop with ubuntu 10.04.
I think I held down the shift key for a while and a message popped up like 'sticky keys' for winbloze.
I hit cancel on the box, but then couldn't type anything after. Not in Gedit, not in firefox, not in openoffice.
I tried holding shift to bring the box back, and no luck.
What to do?
is there any known way to enable any type of 3-d anything on ubuntu? something like 3-d vision from nvidia? i have that for windows, and i know its only compatible with direct x.. but is there any work-around to have something similar for the desktop or the cooliris firefox plugin, or anything at all?
View 6 Replies View RelatedI recently installed ubuntu on my pc in parallel with windows 7 ( I have been running wubi so far ). After the installation was completed I installed chrome and Mathematica ( by using the terminal ). I then restarted the computer. When I restarted ubuntu again I realized that I couldn't type on the Terminal any longer.I can type on anything else, documents, browsers, Mathematica ecc, but, as soo as I try to type over the terminal the mouse pointer disappears and nothing happens. However I can copy paste on the terminal but it is of no use since I cannot use the enter key.
View 4 Replies View RelatedI have been having multiple problems setting up my friends computer to type korean. I installed Smart Common Input Method but none of the hot keys seem to register. If you need more info about the computer or installation just ask!
View 1 Replies View RelatedLast time I let my Ubuntu 11.04 to upgrade all its packages, I think a new kernel was also downloaded. Since then keyboard stopped working so that I can press Enter button on the login screen, but after I get the desktop ready I cannot type. The kernel version is 2.6.38 but if I boot with 2.6.35 nothing changes. I can start Ubuntu in recovery mode, keyboard is working there, but I don't know what to do there. When I looked around the settings on a certain menu point (Input settings or kind of..) I got an error message that IBus daemon is not started. I was asked if I'd like to start it, but after starting nothing got better. How could I get my keyboard working again..?
View 2 Replies View Related