Everything has been fine until tonight - updates have always ran ok. Automatic update screen appeared tonight so ran it as usual.
Now the keyboard layout is all wrong, ie backspace key puts a 5 in rather than go back a space, enter key puts / and spacebar moves 2 spaces also numbers on the right are not correct despite number lock on as usual. What happened to the settings and how can reset keyboard settings.
I was running Ubuntu 10.10 Beta and everything worked great. I upgraded one time and now my screen resolution is wrong. I have tried many things, but I would like to start troubleshooting from scratch.
The computer is a Dell Inspiron 537 Desktop. It is using 1024x768 resolution, when it should be using 1280x1024.
Code:
$ lspci -v
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
Subsystem: Dell Device 02e1
Flags: bus master, fast devsel, latency 0
[Code].....
I have dual boot (winxp) which has been working for over a year now.But for some reason recently, grub wont recognise the keyboards arrow keys. ie cant change menu selection. in fact it wont recognise keyboard at all it seems. Pressing enter wont work either. I have to wait for the timeout.
The arrows work before hand (like in bios settings) and after once ubuntu has booted. Just not in the grub menu
Its something to with the USB wireless keyboard. If i replace it for standard PS2 kybd it works.
When I use the down arrow on my new keyboard it also does and enter key as well. When I use the left and right arrow keys and hold them it doesn't keep going. It just clicks once and I have to pressing it over and over again. Any one know the correct settings to setup my keyboard? It's a Logitech Illuminated Keyboard.
View 2 Replies View RelatedI cannot use several keys (1,`, q, a, z & Esc) on my keyboard.I have just installed Kubuntu 11.04, AMD64 version via Wubi. Everything went well w/o any errors. At 1st boot, I also logged in w/o errors, and then tried some apps for Office & Network and shut down. The keyboard was still alright at that time. However, The problem started on the 2nd boot after the installation. Those keys do not response in Kubuntu & Windows 7 login screen and even in my PC's BIOS setup.
My laptop model is Dell Lattitude E6410, core i5, Intel HD Graphics, WD HDD 160GB. And I installed on the other partition, not my Windows one.
For 9 days now I have been getting errors when trying to run Update Manager saying that ALL my keys are missing.
Code:
W: GPG error: http://archive.canonical.com maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: GPG error: http://extras.ubuntu.com maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 16126D3A3E5C1192
W: A error occurred during the signature verification. The repository is not updated and the previous index f
[Code]...
I have been using SUSE 11.2 for some time now. I have 2 problems that I have been unable to resolve.
1. I like to use the Caps-Lock key to type capital letters every now and then. I turn caps lock on, type the letter, turn it off, and type the rest of the word (Yes I know I can use shift. My brain is not willing to unlearn ). After I turn the caps lock off, there seems to be a delay after which it switches off. This ends up making the second character caps as well. For example I want to type 'Who' instead I end up typing 'WHo'.
What setting can I tweak to get rid of this ? I am not sure what to search for, if some one has already asked this question.
2. I often select a couple of words using the 'ctrl+shift+ left / right arrow key' combination and attempt to overwrite the selection by typing in new characters. For example select the words 'abcd xyz' and then type 'a', which will replace the selected text. Sometimes I get this character '' instead of 'a'. A similar thing happens for other characters. Sometimes the keyboard will not respond for the first 2-3 strokes and the system will send out a *beep*. I have no clue why this happens. It does not happen consistently either. But it does happen in all text related windows. For example in a browser / kwrite / <Insert an application that can handle text here>
When I tried to upgrade (update) current packages list in my synaptic I got error messages about unresolved gpg keys as following:
Code:
How I can get all missed keys for completing update process?
I'm new to linux, been using fedora 12 for about a week. I just noticed a problem with my keyboard layout. When i press the key with the backslash and pipe character, i get < for backslash and > for the pipe character. I have tried the following to fix the problem:
1.$ gnome-keyboard-properties then selected the proper keyboard model (Asus Laptop) tried adding different keyboard layouts and setting them as default nothing i did there made any difference.I am currently using USA, i have tried Canada English, USA international, and more I noticed that even when i change it to something like Afganistan, there is no noticable different when i type in the test area. I notice that there are keyboard layouts that have < and > where the backslash and pipe character should be, but the picture for USA shows the pipe and backslash where they should be.
[Code]...
I just installed Fedora9 in my desktop. The installation was successful and it was doing security update and system update right after install. After all the update service finished, I do a manual update to see what happy (Sysem>Administration>Update System). It keeps coming up with Package Error with the message "failed to get a TID: Incorrect path with ';' returned!".
View 8 Replies View Relatedhow can i control vlc via the keys above my keyboard(my english sucks and i have no idea what they are called, meta keys? multimedia keys? whatever)only MPlayer responds to them, not vlci opened vlc preferences window and in hotkeys page, i wanted to add the "PLAY KEY" to "PLAY/PAUSE" but it wouldn't even recognize the keys, nothing happens when i press them, but it would recognize something else ,like
View 2 Replies View RelatedI could not find any way to enable dead keys on my keyboard on Lubuntu 10.04 via gui.I created xorg.conf by using X -configure command and tried to add followings into /etc/X11/xorg.conf but it did not work.
Code:
Section "InputDevice"
Identifier "Keyboard0"
[code]...
Yesterday, after browsing for a while, my keyboard suddenly started to show different characters than typed. The keys are just typing different letters than pressed. For example, the j displays a 1, the k displays a 2, and so on. This only happens on the x server. On the terminal, before starting the x server, the keyboard works just fine.
I'm running Ubuntu 9.10.
I have set my Keyboard as listed in the tile and it work great with one drawback, When typing in Espańol I can not get the inverted ?. I have looked on the Keymap under Latin with no success either.
View 5 Replies View RelatedI recently updated from 8.10 to 10.4 by updating to 9.04 & 9.10 first. My problem is, everything seems to be booting normally but once the splash screen loads, it freezes and the keyboard and mouse both stop working. After the splash screen hangs for several minutes, the screen goes black. I am wondering if there is something I can do during the boot sequence to affect the process or if I could do something with a burnt copy of 10.4.
View 2 Replies View Relatedlive in the German speaking part of Switzerland and therefore a Swiss German keyboardThere are only 3 different keyboard layouts: Switzerland, Switzerland eliminate dead keys/sun keysThe problem is: I desperately need the dead keys to type the be ?rall of the layouts have the dead keys eliminated so the only way is to use caps lock, but that's not all that great.
View 4 Replies View RelatedI've noticed that my field keys don't work on my iMac. The eject key works, but if I try ALT+F2 I get nothing. I there something I need to reconfigure to get my keyboard full functioning?
View 2 Replies View RelatedThey do work sometimes but then after a while, they stop working completely. I'm not sure why...
View 2 Replies View RelatedAfter one of latest update I have problem with meta keys (like shift, ctrl and alt) in KDE. When I press one of this keys, it sometimes stays active after release and deactivates only after I press it again. It's annoying especially while I'm writing some code (php or html) and meta keys randomly stays active after release.
xorg.conf:
Code:
For example I want * key to print #. I searched some Web pages about it but information was too complicated and I should learn about it. Do I have to if I just wanna change some keys?
View 4 Replies View RelatedIs it possible within Linux to program Ctrl + 1 to type my name and address? If so, how?
View 3 Replies View RelatedI recently ran the update manager on my Ubuntu 11.04 box then shutdown and went to bed. When I booted the pc back up the next day my resolution is stuck at 1024x768 when I normally run at 1366x768.
I'm using the default open source drivers since the AMD ones are useless with my hardware (specs in the signature) I've tried changing the resolution through the "monitors" GUI and directly through xrandr.
xrandr output:
Code:
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
[Code]...
I'm using Ubuntu 9.10. All of a sudden several of my function keys stopped working and several keyboard shortcuts that I had setup involving function keys stopped working as well.
For example, when I go to preferences->keyboard shortcuts and try to set "Toggle fullscreen mode" to Alt+F11, the text "XF86AudioRaiseVolume" appears where it should just say "Alt+F11". Pressing Alt+F11 does nothing.
All of my function keys somehow got mapped to XF86AudioBlahBlah and no longer work. How do I undo this? I recently installed ffmpeg and gtk-recordmydesktop but I don't think I installed anything else.
I have updated to 10.10 and now my ir remote is simulating keyboard arrow keys which is causing problems in applications like Boxee. The weird thing is if I stop lircd it still simulates the keyboard arrow keys.
Does anyone know how to stop the keyboard arrow keys from triggering when the ir remote up, down, left or right buttons are pressed?
(Here are all the IR config files)
hardware.conf
Code:
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Streamzap PC Remote"
REMOTE_MODULES="lirc_dev streamzap"
[Code]....
I got Sun Type 5 Unix keyboard which uses mindin-8 connector, attached to a PC through a special adapter which converts it to USB. The keyboard's distinctive features are Control key in the middle row (swapped with Caps Lock which makes it a Unix layout - much more comfortable for the pinky) plus a whole bunch of extra Sun keys, including such useful ones as "Copy", "Paste", and volume control. (Sun Type 5 keyboard has very good feeling to its keys, much better than Type 7 one).Those extra keys work as expected with this adapter in Gnome on OpenIndiana (OpenSolaris previously), but aren't supported out of the box on Debian. Looking around I didn't find any good up to date tutorial how to enable them on Debian or any other Linux. Did anyone try to do it?
View 5 Replies View RelatedI found this:Software.openSUSE.orgIt's supposed to make G keys work and make them programmable, but i don't know if it'll work for G11 keyboard...Did anyone manage to get the G11 macros to work in Linux?I'm using openSUSE 11.2. 64 bit.I tried searching in YAST for some drivers or something, but couldn't find anything...
View 1 Replies View RelatedI want the system to see a certain keyboard key as if it were another key. To put an example, suppose I want each time I type 'e' the system sees 't'. Can this be done?
View 7 Replies View RelatedI am running Arch Linux with KDE 4.5. I have a Microsoft Wireless Keyboard 3000 v2.0
At the top of the keyboard are 5 extra buttons numbered 1 to 5. These are in addition to the function keys.
I ran xev to determine the keycodes generated by these buttons and nothing results. The keys do nothing in xev. How can I enable these keys to use for desktop switching?
I'm having trouble getting keyboard volume keys working with lxde. I have tried a couple of methods found on another forum, but they did not work
View 4 Replies View Relatedhow to map the G keys. i tryed installing g15 daemon but now what am i supposed to do?
View 1 Replies View Related