I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I'm running Virtualbox from the Sun website (need the USB support) and it breaks after each kernel update.The problem is that I installed a lot of Ubuntu systems for transitioning windows users with Windows in virtualbox to ease the migration but I have to rerun vboxdrv setup after each kernel patch.
I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
I have inserted a module with modprobe. However it seems to have problem. 1- How can I remove the module from modprobe? 2- If I reboot and the kernel can not boot up because of this faulty module, how can I remove it?
xubuntu 9.10 I have a Drobo, sort of RAID storage device. It makes use of volumes of 2TB. Only the first volume (LUN) is shown up. According this information;[URL]... that happens if the scsi_mod kernel module is not loaded.
I need to rebuild a kernel module and I'd like the module to be compatible with the ubuntu distributed kernel.I tried something along these lines:
* get the sources via: apt-get source linux-image-2.6.35-24-generic * cd to the unpacked (and patched, I believe) directory: cd linux-2.6.35 * take kernel config that I'm currently running (I'm running 2.6.35-24-generic): cp /boot/config-2.6.35-24-generic .config * build the module I care about: make drivers/usb/class/usblp.ko
The module is built, but when I try to load it, insmod fails and I see this in dmesg: usblp: no symbol version for module_layoutI tried to generate the kernel config via debian/rules genconfigs, which resulted in the same config file (with the exception of the local version string). I tried building some other modules and loading them, but I always get that error on loading.
I'm trying to set it up so that I don't have to recompile the driver for my RAID card manually every time there is a kernel upgrade.I found a thread on it, here and a help page here, and it looks like it builds the module fine, but for some reason it's not being inserted into the new kernel, or something. It's like the new kernel doesn't know it exists, even tho modprobe -l shows the newly built module exists (and is in the correct place)Here's the script that I wrote up to get the drivers set up in DKMS:
I have just started learning Device driver programming in Linux and am stuck in my first program. Its just to see init_module and cleanup_module calls to use printk and see results using dmesg. program is:
Code:
#define MODULE #include<linux/module.h> int init_module(void)
Just updated the kernel to 2.6.32.22 as requested by Update Manager, and was rebooted into low graphics mode, the nvidia kernel module failed to load.I tried installing the linux-headers-2.6.32.22 but this made no difference. This could get ugly if such an early update mucks up
My nvidia graphics driver was updated last night, and since then I've been unable to get into Gnome without resorting to low graphics mode. I have extensive knowledge of Windoze systems. Upon boot up, I get the following error:
(EE) NVIDIA(0): Failed to load NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration
I've tried some troubleshooting, including attempting to uninstall all nvidia drivers and reinstall (via synaptic).
Administration->Hardware Drivers reports that version 173 is installed loaded and active. Nvidia X Server Settings (nvidia-settings) gives me the "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." error.
I've tried the nvidia-xconfig (both with gdm up and down) and it hasn't made any difference.
Oh, it's a GeForce 6200 wwith two Dell E193FPp monitors running on Ubuntu 10.04.
Here's my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010 Section "ServerLayout"
My laptop broke beyond repair recently so I am stuck on a 6 year old hp pavilion zv5000 given to me by a friend and I thought I may as well give linux a go, I have been meaning to for years. I've installed xubuntu 10.04 as I heard it is less resource intensive than normal ubuntu but have been unable to configure the nvidia graphics card. I used the hardware drivers program which installed the nvidia accelerated graphics driver 96 (which was the recommended version) and then ran sudo nvidia-xconfig as instructed and got
Code: Warning: Unable to locate/open X configuration file. New X configuration file written to '/etc/X11/xorg.conf'
Which I presume means it worked correctly, but whenever I try to boot I get a message saying "failed to load nvidia kernel module", at which point I either have to restore the generic configuration or just start the session in low graphics mode. I have googled the problem and in a lot of peoples cases it seems to be linked to upgrading from a previous version whilst mine was a fresh install. I tried sudo modprode and it says the nvidia module isn't present. I tried installing the packages in synaptic which mentioned nvidia kernel modules but still no luck.
Every time I start up my Ubuntu 10.04 install, instead of the graphical login screen, I get an error dialog stating the following:
Code: Ubuntu is running in low-graphics mode. The following error was encountered. You may need to update your configuration to solve this. Also in the dialog are several lines of text:
Code: (EE) <date and time> Failed to initialize the NVIDIA kernel module. Please see the system's kernel log for additional error messages and consult the NVIDIA README for details. ***Aborting*** Screen(s) found, but none have a usable configuration.I'm not sure what it means by "kernel log," or where any error logs might be saved. Any tips? Perhaps if I can find such error logs, posting them will help diagnose the problem.
If it matters, I have 2 monitors, an NEC AccuSync 120 CRT and a Samsung BX2440X LCD. I use them in Xinerama mode with the Nvidia drivers under my Ubuntu 9.10 install and have no problems there. To get normal graphics under 10.04, I have to start up in low-graphics mode, kill X server, reinstall the Nvidia proprietary drivers, and restart the X server. Then I have to do it all over again after the next restart, every time I want to run 10.04.It's very annoying.Also possibly relevant: I use the latest 32-bit Nvidia drivers for 10.04, version 256.53.I've found a few other threads where people had problems similar to this, but nothing exactly like my situation nor any real resolution so far. I hope it can be fixed, because there are other things about 10.04 that I really like.
I am trying to figure out how to compile qcserial.c kernel module from the latest kernel source file located in the 2.6.37-rc8 kernel tree. I have installed the sources for my current kernel 2.6.35-24-generic on maverick and it seems that my includes are not in the right place to make the qcserial.c file happy.
I overcame this issue by passing the -I option to gcc that points to the directories that it is looking for. I am currently getting errors while compiling and I was wondering if it is impossible to compile qcserial.c on my current kernel? I am looking to get the diagnostic port and GPS port enabled for my built-in 3G card.
I havent built modules for quite some time and that was on opensuse with the fglrx module.
I am trying to fix my friends laptop and after the most recent upgrade she performed she got this error message when her laptop boots. Thing is that it stays frozen in that mode. I don't even see the grub boot loader. I know its the only operating system she has running on her laptop as well. The following error was encountered. You may need to update your configuration to solve this.
(EE) NVIDIA: failed to load the NVIDIA Kernel module. please check your (EE) NVIDIA: system's kernal log for additional error messages. (EE) failed to load module "nvidia" (module-specific error, 0) (EE) no drivers available She is running ubuntu 10.10
I recently bought an AMD R7 360 videocard and I'd like to use the free Radeon driver.
Problem is, PCI-ID 0x665f is not present in Jessie's 3.16 kernel sources. The hardware however is supported, it's just not recognized. So I'll have to get the Debain sources and patch include/drm/drm_pciids.h
From the 4.1rc1 kernel I know what to patch and where.
Debian page that explains how to use the Debian build system for recompiling the current kernel from Debian packages?
I have been trying to run my vmachines in virtualbox with no success so I decided to install upgraded packages for upgraded kernel, this means to install them from Virtualization-kernel-HEAD repo.The error is about that known issue where the kernel module can't start.
I have a Samsung phone GT-B3210. For some time I was unable to find working Windows drivers for it. I eventually gave up looking. Then one time I was charging phone over its USB port and booted Ubuntu and was pleasantly surprised when I saw phone's μSD card reader on my desktop. I now need to switch to Gento and would like to be able to work with phone there too. Lsusb tells me it's detected as Bus 007 Device 006: ID 04e8:663f Samsung Electronics Co., Ltd SGH-E720/SGH-E840but lsmod wasn't very helpful. On the list of loaded modules, I wasn't able to find one which looks like it's related to the phone.
The problem I'm facing is that I can't use my headphone. Sound works, but not the headphone. See my ealier thread. It was suggested to edit the module options, but I don't quite know which buttons to push.
for the last few releases, starting with 9.04 i've been having serious crashing problems with the nvidia driver. whether i installed it manually using the latest drivers directly from nvidia, or installing them through the restricted driver option. after a few hours CRASH. it's been awful. and i tried everything from this side to the moon to fix this issue, all to no avail. no idea why i've even stayed with ubuntu after all these issues. came from the debian world back in 5.04, and almost moved back a few times. but i did a clean install of 10.04, and thought i'd give the nvidia driver one last chance... if it didn't work i'd be moving back home to debian (with the suspicion the issue would stay).
so after i tried the restricted driver and CRASH. nothing to fix it. then i thought ok i'll try to use the latest driver from nvidia. but ran into this error when installing it:
Quote: ERROR: Unable to load the kernel module nvidia.ko. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release. so after googling around i found a fix to this error i was getting during the install:
Quote: sudo nano /etc/modprobe.d/blacklist.conf
blacklist vga16fb blacklist nouveau blacklist rivafb blacklist nvidiafb blacklist rivatv
I have had this error for way too long. This post will be done in parts. I've had it for months now and I'd like to solve it. Every suggestion on linux forums, ubuntu forums, or some XYZ-linux blog seems to either work for just one boot or none at all. since I have updated my kernel on several occasions, I have also re-installed my NVIDIA kernel module by downloading the run file from NVIDIA's website. It also follows instructions from this post. I have installed the linux header files and the xorg-dev files from repository I have also tried this.
Problem: computer and graphics card had been running for months without problem. For some reason, last night, things locked up...wouldn't think it's related, but happened when I noticed I was locked out of creating new folders on my usb attached My Book storage drive. So, from terminal I tried to sudo change permissions to read/write. Everything locked up. Now, every time I reboot it states needing to use low graphics mode "Screen, graphics card, and input device settings could not be detected correctly."
When I check the error log I see: "(EE) Failed to initialize the NVIDIA kernel module.."(EE) NVIDIA(0): ***Aborting* Screens found but none have a usable configuration. Fatal Server Error - no screens found"
If I try to then start in safe low graphics mode or restart X, I get the Ubuntu splash screen with the 5 dots that turn red to show progress...but nothing ever happens. I can switch to VT 1, login at command line, and type "startx" and then the graphical desktop loads just fine. Video playback, etc. is perfect and fine - not in low graphics mode at all. System seems totally normal.
However, I have to go through these steps each time I reboot. Also, I noticed that when I try to boot from Ubuntu Live CD I can't. I get as far as picking English as a language, then screen goes blank and goes to power saving mode (no signal being sent). This greatly concerns me as even though I have a work around for now - getting to command line then startx'ing - if I ever needed to reinstall from the CD, it seems I can't.
Some info on my pc:Running 10.04 on Compaq Presario SR1950NX AMD 64 GeForce 6150 LE/PCI/SSE2/3DNow! <- believe built onto motherboard on what I can do to fix? Is this a sign that something is wrong with my video card?
before i get a lot of annoyed responses, I did check the forum and found a couple older previous threads on this topic, but they don't seem to really explain any real solutions to the problem im having.Here's the story- I was looking around for instructions and found this "howto guide" on installing nvidia display driver [URL]I went through the steps he listed:
downloaded the driver packages, install the dependencies from the shell, and then i pressed CTRL+ALT+F2 to get out of X and into text mode. I stopped my gdm with the command: sudo /etc/init.d/gdm stopand then i tried to install the driver using: sudo sh (on my NVIDIA driver- his version was a bit outdated compared to the one I downloaded)But here is where the problem starts, as I go through the installation process and click yes, i reach the "progress bar" then the screen says "unable to build the NVIDIA kernel module". and then it just exits. What is going on here? Am I missing some other package or file?
