Ubuntu :: DKMS Not Compiling New Module Using New Kernel?

Mar 19, 2011

I'm trying to set it up so that I don't have to recompile the driver for my RAID card manually every time there is a kernel upgrade.I found a thread on it, here and a help page here, and it looks like it builds the module fine, but for some reason it's not being inserted into the new kernel, or something. It's like the new kernel doesn't know it exists, even tho modprobe -l shows the newly built module exists (and is in the correct place)Here's the script that I wrote up to get the drivers set up in DKMS:

Code:
#!/bin/bash
set -e

[code]....

View 4 Replies


ADVERTISEMENT

Debian Configuration :: Kernel 2.6.32-trunk Won't Load The Dkms Module And Virtualbox Will Not Run

Jan 22, 2010

My problem is that it won't load the dkms module and Virtualbox will not run.

View 14 Replies View Related

Programming :: Compiling Kernel Module In Ubuntu?

Jul 6, 2010

I have just started learning Device driver programming in Linux and am stuck in my first program. Its just to see init_module and cleanup_module calls to use printk and see results using dmesg. program is:

Code:

#define MODULE
#include<linux/module.h>
int init_module(void)

[code].....

View 3 Replies View Related

Ubuntu :: Compiling Individual Kernel Module From Qcserial.c?

Jan 4, 2011

I am trying to figure out how to compile qcserial.c kernel module from the latest kernel source file located in the 2.6.37-rc8 kernel tree. I have installed the sources for my current kernel 2.6.35-24-generic on maverick and it seems that my includes are not in the right place to make the qcserial.c file happy.

I overcame this issue by passing the -I option to gcc that points to the directories that it is looking for. I am currently getting errors while compiling and I was wondering if it is impossible to compile qcserial.c on my current kernel? I am looking to get the diagnostic port and GPS port enabled for my built-in 3G card.

I havent built modules for quite some time and that was on opensuse with the fglrx module.

View 9 Replies View Related

Debian :: Compiling XIllybus Kernel Module

Sep 25, 2015

I'm having problems to compile XIllybus kernel module. As this guide explains, [URL] ..... (on the top of page 8 of 25) I unpackaged the tar.gz file and compiled the kernel module by typing the make command in the proper path. When I compile the module with make command, I get the following error:

make -C /lib/modules/3.16.0-0.bpo.4-amd64/build SUBDIRS=/home/xillybus/module modules
make: *** /lib/modules/3.16.0-0.bpo.4-amd64/build: No such file or directory. Stop.
make: *** [default] Error 2

/lib/modules/3.16.0-0.bpo.4-amd64/build path does not exist. What does it mean? Should I have to install some kernel packet? www does not work for me.

View 3 Replies View Related

General :: Error During Kernel Module Compiling

Mar 13, 2011

I update my last kernl to 2.6.38-rc7 but when I launch VirtualBox, on stdout.The vboxdrv kernel module is not loaded. Either there is no module available for the current kernel (2.6.38-rc7) or it failed to load. Please recompile the kernel module and install it by sudo /etc/init.d/vboxdrv setup.

View 1 Replies View Related

Programming :: Compiling Kernel Module Using (/asm/system.h)

Apr 3, 2011

I`m trying to compile sources of kernel module which has been written for kernel 2.6.9. There were many changes in kernel headers since then in current kernel sources. I`ve found that old /asm/system.h was moved under architecture dedicated directory /arch/*/include/asm/system.h. Anyway during sources compilation I`m having errors related to kernel sources. It looks like there is something wrong with this /asm/system.h

Code:

../asm/system.h: In function �__cmpxchg�:
../asm/system.h:248: error: expected string literal before �LOCK_PREFIX�
../asm/system.h:254: error: expected string literal before �LOCK_PREFIX�

[code]....

View 3 Replies View Related

Debian Programming :: Compiling Linux Kernel Module

Aug 27, 2014

I'm trying to compile a Linux kernel module called hello-2.c using the command "make -C /lib/modules/$(uname -r)/build M=${PWD} modules" (without the quotes) (which I found online), and the following is the (seemingly successful) output.:

Code: Select allmake: Entering directory `/usr/src/linux-headers-3.2.0-4-amd64'
  Building modules, stage 2.
  MODPOST 0 modules
make: Leaving directory `/usr/src/linux-headers-3.2.0-4-amd64'

However, I don't see a hello-2.ko (in the same folder or anywhere else for that matter). I'm Using Debian GNU/Linux 7.6.

Everything I am doing is within a folder/directory called "thefolder" (without the quotes) in the "/tmp" directory (without the quotes).

Why I can't see a hello-2.ko, and what to do to get it?

View 2 Replies View Related

Fedora :: Use Rpmbuild To Compile Kernel Without Re-compiling Unchanged Module?

Apr 20, 2011

Using the rpmbuild to compile the kernel, every time the patches will be applied to the source code. So even if no changes are made to the source code and no patches are added to kernel.spec, the whole kernel will still be recompiled, wasting a lot of time

View 13 Replies View Related

Ubuntu :: Using DKMS To Automagically Build Rr26xx After Kernel Update?

Nov 29, 2010

I am trying to setup dkms to automagically build the rr26xx driver for a rocketraid 2640x4 card when the kernel is updated.I followed this guide which sounded like exactly what I was looking for.When I get to the step where you actually use dkms to build the module with:

Code:
sudo dkms build -k `uname -r` -m rr26xx -v 1.2
I got the following error:

[code]....

View 4 Replies View Related

Ubuntu Installation :: Lirc (dkms) Fails Each Time Kernel Upgraded?

Aug 10, 2011

each time i upgrade my kernel, my installation of lirc fails to work after the upgrade, and i have to re-compile (against new kernel) and install the lirc modules... which i do via something like:

Code:
sudo modprobe -r lirc_imon
sudo dpkg-reconfigure lirc-modules-source
sudo modprobe lirc_imon

after which all is well. this of course is a problem that DKMS should solve for me but it doesn't do it. also i get this message in my messages log:

[Code]...

View 1 Replies View Related

Debian :: Compiling Kernel - 2.6.26 Version Of Kernel Doesn't Longer Exist In Kernel.org Website

Sep 16, 2010

i'm using this guide videos - howto: debian linux kernel compilation, part 1 and the author says i need kernel 2.6.26 this version of kernel doesnt longer exist in kernel.org website and the only 2.6.26 i found is a patch here. should i use the patch? or download another version of kernel?

View 2 Replies View Related

General :: Adding A New Kernel Module To Wireless Driver Module?

Apr 22, 2010

I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.

View 2 Replies View Related

General :: Install Module U32 Into The Netfilter Module For Kernel 2.6.27

Jan 30, 2011

I need to install module u32 into the netfilter module for kernel 2.6.27.

I did not see the source code in the kernel version I have. where can I find the code for U32 module.

I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?

I building the kernel for a MIPS processor.

View 3 Replies View Related

Ubuntu :: Packages Needed For Compiling Module?

May 24, 2011

A friend is running Ubuntu 10.04 on a laptop that uses the Ralink RT5390 chip for wifi which requires compiling and adding a module. My plan is to...

1. download on my 10.04 laptop whatever .dpkg packages are needed to compile a new module,

2. meet at a location that has a good wifi (just in case),

3. connect the two laptops with a cross-over Ethernet cable,

4. download and install the compiling tools + module source on her laptop, I need to know three things:

1. Which Ubuntu packages must I download to be able to compile a new module? Is "build-essential" enough?

2. Where can I find those packages as .dpkg, so I can install from those offline files instead of fetching them from the Net?

3. To get an Ethernet connection going between the two laptops, do I need to do anything extra on her laptop besides assigning it an IP manually that is in the same range as my laptop?

View 1 Replies View Related

Ubuntu Installation :: Packages Needed For Compiling Module?

May 24, 2011

A friend is running Ubuntu 10.04 on a laptop that uses the Ralink RT5390 chip for wifi which requires compiling and adding a module. My plan is to...

1. download on my 10.04 laptop whatever .dpkg packages are needed to compile a new module,
2. meet at a location that has a good wifi (just in case),
3. connect the two laptops with a cross-over Ethernet cable,
4. download and install the compiling tools + module source on her laptop, and
5. cross my fingers.

So I need to know three things:

1. Which Ubuntu packages must I download to be able to compile a new module? Is "build-essential" enough?

2. Where can I find those packages as .dpkg, so I can install from those offline files instead of fetching them from the Net?

3. To get an Ethernet connection going between the two laptops, do I need to do anything extra on her laptop besides assigning it an IP manually that is in the same range as my laptop?

View 1 Replies View Related

Slackware :: Compiling A RT73 Module In Slack 64 13.1?

Sep 27, 2010

Actually, I have posted this problem here but I don�t know if is best to ask it here. The problem is that I have upgraded my OS to Slackware 13.1 64 bits, and now, I can�t compile the module RT73 from serialmonkey

There are a lot of similar tutorials explaining the steps for a succesfully installation. I had followed any of them before, and I had no problem never.

But now, I get this error:

Code:
make[1]:Entering directory "/usr/src/linux-2.6.33.4"
Building modules, stage 2
MODPOST 0 modules
make [1]: Leaving directory "/usr/src/linux-2.6.33.4"
rt73.ko failed to build!
make:*** [module] Error 1
On the other hand, in the serialmonkey page they said that the driver was included into the kernel yet, but I don�t know how can I now if I have the driver installed. The true is that my usb doesn�t work.

It�s is a USB D-Link System AirPlus G DWL-G122 Wireless Adapter (rec.C1) [Ralink RT73]

View 4 Replies View Related

Software :: Compiling Mod_auth_mysql Apache Module On ArchLinux?

Nov 2, 2010

I've never compiled/built/installed any Apache module before, and I just can't seem to get it working on ArchLinux. I got the source code from here: [URL] Then I tried doing this...

Code:

apxs -c -L/usr/lib/mysql -I/usr/include/mysql -lmysqlclient -lm -lz mod_auth_mysql.c

And I get this...

Quote:

/usr/share/apr-1/build/libtool --silent --mode=compile gcc -prefer-pic -march=x86-64 -mtune=generic -O2 -pipe -DLINU X=2 -D_REENTRANT -D_GNU_SOURCE -pthread -I/usr/include/httpd -I/usr/include/apr-1 -I/usr/include/apr-1 -I/usr/incl ude -I/usr/include/mysql -c -o mod_auth_mysql.lo mod_auth_mysql.c && touch mod_auth_mysql.slo mod_auth_mysql.c:591:2: error: expected expression before

[code]...

I would eventually like to modify the mod_auth_mysql.c source code so I can append a salt/padding to the end of the hashes (that mod_auth_mysql reads from the database), but I will be happy if I can just install the damn thing.

View 5 Replies View Related

OpenSUSE Multimedia :: Realtek RTL2831 USB Digital-TV Key - Compiling Driver Module?

Sep 12, 2011

I am running openSUSE 11.1 with modified Kernel. While trying to run make on the downloaded driver for the RTL2831 I am getting an error message that I do not full understand. That is:

Code:

linux-2c5j:~/rtl2831-r2 # make
make -C /root/rtl2831-r2/v4l
make[1]: Entering directory `/root/rtl2831-r2/v4l'
No version yet, using 3.0.4-41-desktop

[code]...

I am not sure what is required when the error is "first use this function". How can I use the function T_DIGITAL_TV if I first have to install my driver in order to use the stick?

View 1 Replies View Related

Ubuntu :: VirtualBox Kernel Module Breaks After Each Kernel Update?

Jan 6, 2010

I'm running Virtualbox from the Sun website (need the USB support) and it breaks after each kernel update.The problem is that I installed a lot of Ubuntu systems for transitioning windows users with Windows in virtualbox to ease the migration but I have to rerun vboxdrv setup after each kernel patch.

View 2 Replies View Related

OpenSUSE :: Kernel Module / Building VirtualBox Guest Additions Kernel Modules - Failed?

Feb 10, 2010

I installed openSUSE 11.2 on virtualbox. My host is windows 7. I tried to install the guest additions, but i get an error saying

Code:
Building VirtualBox Guest Additions Kernel Modules...Failed
(Your system does not seem to be set up to build kernel modules)

How should i go about to let my system build kernel modules?

View 7 Replies View Related

Debian Configuration :: Nvidia Kernel Module With Custom Kernel

Jan 24, 2010

I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.

View 2 Replies View Related

Ubuntu :: Compiling Kernel In 10.04?

Mar 2, 2011

so I am wanting to compile my own kernel to see if i can get my laptop to run a lill better. I found the how too's to do the compile, but what I want to know is.. what is the most complete way to find all the hardware and such that is in my laptop so i can build all the support into the kernel that i need and leave out EVERYTHING i dont need.

i figured lspci is a start but there has to be more info somewhere to find the exact needs of the laptop.

View 7 Replies View Related

General :: Getting Error "invalid Module Format" And "insert Kernel Module" / What Is This?

Feb 22, 2010

What is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?

View 8 Replies View Related

Ubuntu :: Compiling A Custom 64 Bit Kernel With BFS?

Aug 1, 2010

I would like to try and optimize my kernel a bit. Since I am doing this on a fresh install, I don't really care if the os gets bricked in the process, and I am sure I can bring it back if I can boot into a recovery console from the old kernel. So, I followed thispost. I patched it and copied and edited a config file from /boot/, saved it as .config, I tried it several times with both removing and not removing /debian and /debian.master directories from the source, yet I always get the same error when I run "make oldconfig".

Code:
$ make oldconfig
scripts/kconfig/conf -o arch/x86/Kconfig
*** Error during writing of the kernel configuration.
make[1]: *** [oldconfig] Error 1

[Code]...

View 1 Replies View Related

Ubuntu :: Compiling A Kernel => Root Fs Won't Mount?

May 16, 2010

I'm trying to compile a "faster", more optimized kernel. It compiles ok, but can't mount the root filesystem.Here is my kernel configuration for the 2.6.33.4 kernel. My boot partition is ext4 on a two-disk FakeRAID array totaling 1TB.When trying to boot in recovery mode, it says I could mount /dev/sdaX, etc. but can't recognize my dmraid array. BTW,

View 4 Replies View Related

Software :: Compiling Kernel 1.0.0 With Gas?

Jun 18, 2010

i want to compile and make kernel 1.0.0(the first kernel sources of linux) but its asking gas..... yup gnu assembler. i am using ubuntu 9.10 and if you ask why i am compiling this kernel.... because the truth is to study complete linux kernel.

View 2 Replies View Related

Ubuntu :: Made A Shell Script For Compiling A Kernel?

Oct 8, 2010

Based on the instructions of master kernel thread I made a shell script for compiling a kernel.

Code:
#!/bin/sh
YELLOW="�33[1;33m"
RED="�33[0;31m"
ENDCOLOR="�33[0m"
ech

View 2 Replies View Related

Ubuntu :: Compiling Kernel With Bare Minimum Options?

Nov 10, 2010

I am looking to compile a kernel for my system which is a home built machine. This machine is stable and has not had any hardware changes in the past 2 years. I am trying to figure out exactly what modules and options to include in my custom kernel. Is there a way to see what modules are actually in use on my system and build a custom kernel based on that?

View 5 Replies View Related

Ubuntu Installation :: Compiling A Custom Kernel With Kernelcheck?

Dec 18, 2010

I am thinking about compiling a custom kernel with Kernelcheck. I would like to know if I do compile my kernel will future kernel updates from Canonical replace my custom kernel? Please explain this in simple terms. This would be my first time compiling a kernel.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved