I boot 5 different operating systems (Windows, ubuntu studio, and 3 versions of Ubuntu), but my grub install is grub 2 on ubuntu 9.10. If I do a kernel upgrade on any of the other ubuntu operating systems, how do I update my grub configuration on ubuntu 9.10 so I can boot it?
View 1 Repliesi am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies View Relatedwe have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies View RelatedI'm looking for a method for modifying some jpg photo files last modification date with the corresponding timestamp creation date of each file.The reason is that shotwell import pictures in folders according to last modification date which is stupid on my opinion.
View 2 Replies View RelatedAs a photographer I'm constantly taking photos and storing them in folders. Now occasionally I'm using two cameras (either for different settings or an assistant is also taking photos) which means that for one event I can have differently named images.Both cameras have the same time set (which always helps in Windows) but in Ubuntu when trying to sort my folder by date taken I can't.The options I'm given are to sort them: Manually, by Name, by Size, by Type, by Modification date and by Emblem.Now none of those are helpful to me once I've done a few edits to the images.So please if anyone knows, how do you organise a folder with images taken on different cameras by Date Taken rather than Date Edited?
View 3 Replies View RelatedI am using CRON to create a new, blank file, every minute, in a specific location on my web server. After web searching, and reading man pages, I get the impression that the following command is supposed to work:touch /home/mydomain/var/folder/attachments/`date +%H%M`.txtThis should give me a new file with a file name that is the current hour and minute.However, when executed, the CRON mailer reports:touch /home/mydomain/var/folder/attachments/`date +/bin/sh: -c: line 0: unexpected EOF while looking for matching /bin/sh: -c: line 1: syntax error: unexpected end of fileSo, it looks like shell is seeing the plus (+) sign as an EOFObviously, nothing get created.What would be the easiest, single line command to create an empty file, at a given location, with a time based file name
View 5 Replies View RelatedAnyone have a ksh solution to convert julian date to gregorian date?
View 6 Replies View RelatedI've installed 2 different distros on this old dell laptop, install goes fine, i run everything...reboot a few times. perfect, but the next day, when i boot up, i get " date/time" not set, if i choose to ignore that...computer won't boot... is this a battery issue ? the battery wont hold a charge, so i only run it with power pack...works great, but when i turn this on tomorrow, I'll get that w=error messy.
View 4 Replies View RelatedI installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
after doing an upgrade to 10.4 and updating grub I get this message. how do I address this
[Code]...
I've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
I have 2 hard disks. sda,sdb
In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].
In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.
I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD
Chose advanced istall
Selected sdb3 for Ubuntu
I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted
I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.
Boot Info:
Code:
Boot Info Script 0.55 dated February 15th, 2010 [code]....
ls: reading directory sda6/: Input/output error
I have tried the testdisk/update-grub method, but it didn't work.
So my computer has ubuntu 9.10 installed 1st and I want to install win 7 in a separate partition. Basically, ubuntu 1st, win 7 later so far from what I learned from search results, grub 2 have problem with win 7 installed later and what was recommended was install win 7 before ubuntu. how ever I do not have the time to start over again because there are too many things to back up or install again. can I simply revert grub 2 to grub 1 again and resolve the problem?
View 7 Replies View RelatedI am running 10.04 and when I installed Nvidia 3d driver the fonts in a non GUI terminal ie. contol-alt-F2 are very large. I used to be able to alter the font size in /boot/grub/menu.lst but cannot do the same in /boot/grub/grub.cfg.
View 6 Replies View RelatedI was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
View 3 Replies View Relatedsince i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies View RelatedI've got myself the curious situation where, when I boot the system, I can get grub to start, but it always drops to the prompt.
I can run:configfile /grub/menu.lst
and this brings up the menu with no problems, and from there I can boot the system to either linux or windows. What I don't understand is why it wont go to the menu in the first place?As far as I can tell, grub/Kubuntu got confused when installing, as each of the hd#,# settings in the menu.lst have needed tweaking to let the system boot. (e.g. windows is actually hd0, but the original install had it at hd2. Likewise linux is on hd1, but the menu.lst had it at hd0). I've happily tweaked these to make the system boot, but would appreciate any help in convincing grub to actually load the menu without me having to use the prompt.
A failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
I have used CentOS for a while and have never run into this issue. I searched all over and didn't see a similar issue anywhere, I did an install of CentOS as a server (no GUI) with only the base. Partition is /boot ext3, size of 100MB. The rest of the drive is partitioned as / with ext3. This is being done on a CompactFlash card of 32GB in size. The BIOS sees it as an IDE drive.
When the install completes and the system reboots, the grub stops at the grub> prompt. There is no menu for OS options. If I do the following commands:
grub>root (hd0,0)
grub>kernel /vmlinuz-2.6.18-194.el5 root=LABEL=/
grub>initrd /initrd-2.6.18-194.el5.img
grub>boot
I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
I would like to modify the boot loader settings and triedo open the file grub.confHowever, it is said that the file could not be opened, as seen in the attachment.Tried to authenticate as 'root' before opening the file, but the problem still exist...
View 10 Replies View RelatedPC: Dell Precision T7400.O/S: Windows XP SP3 64-bit & Scientific Linux 5.3 64-bit
The above PC has 2 HDDs installed one has XP and the other Scientific Linux.
Problem: XP needed to be re-installed, i've done this now but now the GRUB Boot loader doesnt load - So just boots straight into XP.
Qustion: Is there anywhere to fix the GRUB? Without wiping the 2nd HDD and re-installing Linux!
Let me know if you need any more info
I just switched from a basic digital camera to a more advanced one that stores both Jpeg and Raw (.Nef - it's a Nikon) files for me.When importing files in Digikam, I rename the files so that they start with Date and Time. Example: 20110121-223748.JPG for a photo taken on Jan 21st 2011 at 22:37:48.I was a bit surprised when importing both the JPEG and the Raw version of the same photo, that the filename is different by a few seconds (no constant offset, sometimes they are the same):
20110121-223748.JPG
20110121-223750.NEF
I did some "research" by looking at the exif data of both files (using "exiftool 20110121-223748.JPG" from the command line). Here is what I got back
(amongst other data):20110121-223748.JPG
File Modification Date/Time : 2011:01:21 22:37:48+01:00
Modify Date : 2011:01:21 22:37:48
Date/Time Original : 2011:01:21 22:37:48
[code]....
So it seems that Digikam is using the "File Modification Date/Time" (different in the Jpeg's and Raw's of my camera) rather than the "Create Date" (the same for both Jpeg and Raw). (The few seconds difference in "File Modification Date/Time" between the two versions of the same photo is probably due to the time that my camera needs to write away the data on the SD memory card. I guess.) Is there a way to have Digikam use the Create Date? (Or the Date/Time Original?)
PS: I'm on Ubuntu 10.04LTS, using DigiKam 1.2.0
I have an old Dell Dimension 2400 and want to install the latest version of the OS. I downloaded the software and burnt the image to a CD. I new the CD had worked as it was recognized by my laptop. When i insert the disk into my CD drive i selected boot from CD drive. It came up with something like "IOSLINUX from a certian date to now" but didnt load.I load up the computer like normal and clicked on the CD from my computer. It came up with a message like " The application could not be loaded, reinstalling it may fix this".
View 9 Replies View RelatedI am trying to streamline my boot screen/GRUB Menu. I know what I want it to look like (grub_wanted.jpg), and I think I know how to get it by uninstalling a couple of things, (synaptic.jpg). Now I have too many items on the screen, and it looks cluttered to me (grub.jpg).
View 3 Replies View RelatedSplashtop caught my imagination of my own tv like computer-"1button and ready to go " have tried puppy xpudWebConverger still unhappy Now lucid aming for 10 sec boot-Keeping ma fingers crossed installed a minimal karmic and am getting a decent 27 sec I Jus Wanted to ask: Is there a way to remove the grub an directly boot into ubuntu -not just hiding it by editing grub.d files and any other ways to reduce boot time.......
View 9 Replies View Related