I am running 10.04 and when I installed Nvidia 3d driver the fonts in a non GUI terminal ie. contol-alt-F2 are very large. I used to be able to alter the font size in /boot/grub/menu.lst but cannot do the same in /boot/grub/grub.cfg.
View 6 RepliesI created a new partition in Windows Vista which, after rebooting, screwed up Grub. I believe that I need to reinstall Grub and everything should be fine, and I remember reading the command to do this on this forum, but I can't find it. When I boot, I now get a black screen with white letters instead of the Grub boot menu. It says something about "Minimal Grub" at the top and gives me a prompt that looks like this.
grub>
I can boot the live CD and I have internet access with it, but I can not remember the terminal command to repair Grub. Can someone tell me this command?
i am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies View Relatedafter doing an upgrade to 10.4 and updating grub I get this message. how do I address this
[Code]...
we have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies View RelatedI've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
I have 2 hard disks. sda,sdb
In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].
In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.
I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD
Chose advanced istall
Selected sdb3 for Ubuntu
I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted
I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.
Boot Info:
Code:
Boot Info Script 0.55 dated February 15th, 2010 [code]....
ls: reading directory sda6/: Input/output error
I have tried the testdisk/update-grub method, but it didn't work.
So my computer has ubuntu 9.10 installed 1st and I want to install win 7 in a separate partition. Basically, ubuntu 1st, win 7 later so far from what I learned from search results, grub 2 have problem with win 7 installed later and what was recommended was install win 7 before ubuntu. how ever I do not have the time to start over again because there are too many things to back up or install again. can I simply revert grub 2 to grub 1 again and resolve the problem?
View 7 Replies View RelatedI was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
View 3 Replies View Relatedsince i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies View RelatedI've got myself the curious situation where, when I boot the system, I can get grub to start, but it always drops to the prompt.
I can run:configfile /grub/menu.lst
and this brings up the menu with no problems, and from there I can boot the system to either linux or windows. What I don't understand is why it wont go to the menu in the first place?As far as I can tell, grub/Kubuntu got confused when installing, as each of the hd#,# settings in the menu.lst have needed tweaking to let the system boot. (e.g. windows is actually hd0, but the original install had it at hd2. Likewise linux is on hd1, but the menu.lst had it at hd0). I've happily tweaked these to make the system boot, but would appreciate any help in convincing grub to actually load the menu without me having to use the prompt.
A failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
I have used CentOS for a while and have never run into this issue. I searched all over and didn't see a similar issue anywhere, I did an install of CentOS as a server (no GUI) with only the base. Partition is /boot ext3, size of 100MB. The rest of the drive is partitioned as / with ext3. This is being done on a CompactFlash card of 32GB in size. The BIOS sees it as an IDE drive.
When the install completes and the system reboots, the grub stops at the grub> prompt. There is no menu for OS options. If I do the following commands:
grub>root (hd0,0)
grub>kernel /vmlinuz-2.6.18-194.el5 root=LABEL=/
grub>initrd /initrd-2.6.18-194.el5.img
grub>boot
I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
I would like to modify the boot loader settings and triedo open the file grub.confHowever, it is said that the file could not be opened, as seen in the attachment.Tried to authenticate as 'root' before opening the file, but the problem still exist...
View 10 Replies View RelatedPC: Dell Precision T7400.O/S: Windows XP SP3 64-bit & Scientific Linux 5.3 64-bit
The above PC has 2 HDDs installed one has XP and the other Scientific Linux.
Problem: XP needed to be re-installed, i've done this now but now the GRUB Boot loader doesnt load - So just boots straight into XP.
Qustion: Is there anywhere to fix the GRUB? Without wiping the 2nd HDD and re-installing Linux!
Let me know if you need any more info
I would like to know if there is any differences on how to install and to configure GRUB 2 in the different architectures (BIOS/IBM PC-Compatibles, EFI/MacIntel and Corebbot)? Does the Ubuntu installer automatically recognize the different architectures and install the appropriate GRUB 2 package ('grub-pc', 'grub-efi' or 'grub-coreboot' according to the arch)? Or does it just install 'grub-pc'? Is the location of GRUB 2's configuration files different depending on the arch of the computer? Or are they all located in '/boot/grub/', '/etc/grub/default' and '/etc/grub.d/', no matter the arch of the computer? Are the files' structure and options to configure GRUB 2 ('/etc/grub/default' and the scripts in '/etc/grub.d/') different depending on the arch of the computer?
View 3 Replies View Relatedmy Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies View RelatedI'm just slightly confused here, but... what the? Why does installing grub-doc remove BOTH grub-pc, and grub-common? So basically it seems like by installing grub-doc, I have uninstalled grub totally (yes, it is still there as the bootloader, but i have no way of updating it now!) from my system. What's the conflict between grub-doc and grub-pc, such that grub-pc has to be removed?
View 5 Replies View RelatedI am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
I just recently installed a kernel, everything works fine after reboot except. When I use nano -w /boot/grub/grub.conf I get /boot/grub/grub.conf: No such file or directoryIs there something i have to do after installing a new kernel in Gentoo Linux.I can't access my /boot all that appears there is a symlink to /boot How can i see my kernels located in /boot.
View 3 Replies View RelatedI have an old laptop that I installed EasyPeasy Lucid on. I have never used Grub2 as my other Ubuntu installs still use Grub Legacy. I have studied all the tutorials which instruct that the grub.cfg file should not be edited directly.This old laptop has one of the dreaded Intel graphics chips for which the kernel automatically loads the i915 module. Of course (like a multitude of others with Intel graphics and Lucid) I booted into a black screen but knew the workaround was to enable mode setting through grubI used the
Code:
i915.modeset=1
and added it to /etc/default/grub line GRUB_CMDLINE_LINUX, just after "quite splash", just
[code]....
I have an old BIOS (only 149 GB detected in 160 GB drive). I have installed very few OS as a result - Windows in first 80 GB , 2 distros (20 GB each) in next 40 MB which is within the 149 GB. On issue of "update-grub" grub seems to detect all OS and generates grub.cfg. But on boot , one distro does not appear in the menu.
View 3 Replies View RelatedI have installed the updates as it was showing by the update manager.After completion of the installation ,the os asked for the rebooting the system so i have just clicked on it..when i again comes to enter the ubuntu...a terminal type window is coming just after my click on ubuntu.it is something like this---
grub release version 1.97 beta 4
sh:grub>
now what should i enter here so that i can come on the main ubuntu gui window..?
I had hard drive = 2 partition, 1 being extended. I had two ubuntu instances+swap+fat on extended and XP on primary. I moved a partition = success. I create a new partition = success. I installed new ubuntu instance -> fail on restart->. I saw sector error on screen on restart. So, Grub has lost 1 existing ubuntu instance and could not create new entry for new ubuntu instance. Read on forum just boot from Live CD and execute some grub cmds from terminal?
View 5 Replies View RelatedTried upgrading from 8.04 lts to 10.04 and it wouldn't work b/c of too many mods to my 8.04 system? So I tried a fresh install per usb stick. System kept locking up during install, as well as when I run it from the usb, I've since learned. graphics card? I can't log into windows either per the grub loading please wait error 15. I've googled & searched the forums & everything I've tried doesn't work, there were some possible solutions that I don't understand how to do. can't get to a terminal to check or modify anything. Hitting "e" at the boot menu does nothing. I don't know how to do anything from here! Compaq Presario SR5350, 2GB RAM, Dual Core Proc 2150MHz. Dual boot w/Vista, HDD is partitioned separately with Root, Home & swap. Also, sda5 or / has been formatted to ext4, still using grub 1.5.
View 9 Replies View Related