I am computer literate but novice in case of linux.I have installed ubuntu.Please tell me how I connect to internet using mobile.how to install cable driver for connecting with mobile.What are installation steps.which rpm is required.
View 1 Replies
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies View RelatedI have done the following (downloaded the driver to "serial" directory) :
1. cd /usr/src/linux-headers-2.6.31-14/drivers/usb/serial/
2. depmod -a
3. modprobe driver_name
I get FATAL error, Module not found, even though it's there. The driver is for my kernel version.
I am having a problem when I hook my computer up to my tv the desktop is bigger than the screen will allow. Is there a way to shrink the desktop down so that it fits within the screen? I can not find a way to do it on the tv itself... I should also add that the resolution is set to 19201080 and the video card has a vga and dvi port. I am connecting to the tv with a dvi-hdmi cable
View 2 Replies View RelatedI am using ububntu 9.10,and have a cable modem internet connection. All I have is an ethernet cable given to me,and when plugged in a windows machine and fire a browser am redirected to default login page where i can login, but when i plug it into my linux machine,i cant get the same done. In network connections it doesnt shows my autoeth0, i have deleted my existing dsl settings(not autoeth0),made a new wired network,i doubt what should i put into MAC addrs field(i have put my machines mac given by lshw -c network.) What should I put in DHCP client id? Anyways when i click on network connections it says under my wired connections-device not configured properly.
View 6 Replies View RelatedHow can I connect two PCs having Ubuntu OS with network cable?Similarly how can I connect two PCs one having Ubuntu and another having WINDOWS OS?
View 3 Replies View RelatedI want connect my two Linux PCs running in 2.6 kernel via cross over cable. To do this I have done the following settings after a Google search:
In PC1
ifconfig eth0 10.10.11.16 netmask 255.255.255.0 up route add default gw 10.10.11.13 eth0 (default gateway which is ip of pc2 )
In PC2
ifconfig eth0 10.10.11.13 netmask 255.255.255.0 up route add default gw 10.10.11.16 eth0 (default gateway which is ip of pc1 )
Then i tried pinging i could not able to connect.Are these above settings enough or any thing am i missing?
For your more information
In PC1
ifconfig output
eth0 Link encap:Ethernet HWaddr 00:16:76:A1:33:37
inet addr:10.10.11.16 Bcast:10.10.11.255 Mask:255.255.255.0
inet6 addr: fe80::216:76ff:fea1:3337/64 Scope:Link
[Code].....
I have installed ubuntu 10.6.4 in my dell inspiron laptop but my ethernet card is not working when I connect my lan cable to it. But it is working well in windows vista. How to load drivers for it.
View 3 Replies View RelatedI have a vista computer that is connected to a router via a ethernet cord. The router is connected to the internet.I have a computer installed with Debian that does not have a ethernet port in the back of it. Is there a way that I could connect my Debian computer to the internet through my vista?
View 5 Replies View RelatedI am trying to connect this cable
[url]
However, it refuses to connect properly. It previously connected, but now whenever I plug it in, nothing happens.
lsusb before:
Code:
lsusb after:
Code:
dmesg error:
Code:
From some other googling, is seemed as if removing "ehci_hcd" or "uhci_hcd" would fix it, however running the following commands does nothing, as shown below:
Code:
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies View RelatedIs there a way to have linux connect to the network when the ethernet cable is plugged in? I'm using Gentoo Linux, and I haven't found the right setup for the conf/net that'll allow me to do that.
View 1 Replies View RelatedI have an old desktop computer that I installed Ubuntu 10.04 on. I also have a laptop with Windows 7 Pro which is connected wirelessly to the internet. The desktop does not have a wireless card and the modem is in another room. I have a spare ethernet cable, is it possible to connect the Ubuntu desktop to the internet by connecting it to the laptop with the cable? I'm not very good with computers.If this isn't possible, how would I go about connecting the desktop to the internet?
View 1 Replies View Relatedi'm having problems connecting to the internet unless i manually enter the IP info.
automatic DHCP does not work. I'm on a dual boot machine vista/ubuntu 10.04 LTS connecting to the internet through a lynksys wireless g router and a cable modem.
I've just gotten a Motorola Razr phone that has a USB/Charger port thing...Can I connect and use this via my laptop and how?
View 1 Replies View RelatedI have a Samsung C5212 mobile. I use it this as mobile broadband modem in Ubuntu 10.04 without any problems. But in maverick I am not able to connect it to Internet. I tried both bluetooth and data cable. Both fails I googled about the problem and got command nmcli. But gives an error message
[Code]....
I have a t-mobile webconnect usb modem.Bus 002 Device 005: ID 19d2:1203 ONDA Communication S.p.A. its not recognized immediately,i have to eject it first,then it starts up.i can tell its working by the led,first it turns green,then dark blue(scanning for the network)blinking,then when it finds the network it turns light blue.and im connected.but then it changes back to dark blue,and i cant connect.so no internet.i did some searching on the forums and google,but nothing seems to work?the network mgr.recognizes it and it shows up as connected.here are some terminal commands i tried.
Code:
rick@narwhal:~$ ls -al /dev/serial/by-id/usb*
lrwxrwxrwx 1 root root 13 2011-04-09 13:33 /dev/serial/by-id/usb-T-
[code]....
I have some problem while connecting mobile phone to fedora through Bluetooth.
View 2 Replies View RelatedI have HP mininote 2133 with Suse SLED 10. I am trying to connect internet via bluetooth and a mobile phone. The machine itself does not have bluetooth, but it recognizes the Belkin bluetooth gadget, which I inserted into the USB port. I started the bluetooth with Yast and "Information about the equipment (I don't know what the correct term is in English, because my OS is in Finnish language)" tells that there is Belkin Bluetooth adapter connected.But my mobile phone cannot find my computer (there is nothing wrong with the phone, because it can find other computers!) when I try to pair up the phone and the computer. What should I do to connect?
View 3 Replies View RelatedI am having a Sony Ericssion Aspen M1i window's mobile which I need to connect as modem to my fedora 13 laptop....
View 11 Replies View RelatedI have HP mininote 2133 with Suse SLED 10.I am trying to connect internet via bluetooth and a mobile phone. The machine itself does not have bluetooth, but it recognizes the Belkin bluetooth gadget, which I inserted into the USB port. I started the bluetooth with Yast and "Information about the equipment (I don't know what the correct term is in English, because my OS is in Finnish language)" tells that there is Belkin Bluetooth adapter connected.But my mobile phone cannot find my computer (there is nothing wrong with the phone, because it can find other computers!) when I try to pair up the phone and the computer
View 1 Replies View RelatedI am the new bies for redhat.i am using "Nokia 5300" on "RHEL5"as i am going to connect the phone to the sysytem.System gets hang.on the main screen it shows some alphabeats and it Gives the message "KERNEL PANIC".i had read in some thread to use "VID" and "PID" but i dont know how to use it.Is their any method so my kernel can Find my hardware.and runs smoothly. please suggest me some methods so i can use my Nokia phone as an MODEM.
View 4 Replies View Relatedsometimes our ADSL connection gives up and we are left without internet connection for days until the problem gets fixed. I mean by this problem along the phone line. It affects all machines that connect to the internet through a Netgear WIFI Modem Router. I recently tried an alternative when this happens is to use a USB Huawei Mobile Broadband UMTS connection which works when you insert it in 1 laptop. Is there a way i could get the Netgear WIFI modem router to connect on that usb stick or PC that is online on that usb stick and give access to other machines that will want to connect to the web ?
View 4 Replies View RelatedI have been trying to install an old HP Laserjet 4100 printer using an USB to Parallel Cable (Cables Limited USB IEEE 1284 printer cable). The driver provided with the cable worked on windows XP and I was able to print. The cable is also sold as supporting Linux but it seems that is was tested for fedora core 4 and Moschip Support Team wrote me that ubuntu 9.04 was not supported. When trying to install the driver (makefile) I got a lot of errors (see annex) . I have a System 76 PC with ubuntu 9.04, kernel 2.6.28-17-generic, intel(R) Core(TM). Whwn connected the printer is not recognized.
How to install the cable ? Or any trade / model of printer cable really able to work with ubuntu ?
Additional information: lsusboutput, linux dirver file list, errors whwn carrying out the make and dmesg output
Additional information: lsusb indicates Bus 002 Device 002: ID 9710:7705 MosChip Semiconductor Printer USB to Parallel
The linux driver files are:
Errors when doing make:
trying to create a "local network" by directly connecting an IBM Thinkpad with Debian Linux installed on it to an Alix computer running Voyager Linux. I'm following a "how to" I found to create a music server, hence the requirement. My issue is I can't get a static IP address to be configured on the Debian machine.I've trawled the net and have found the instructions about editing the /etc/network/interfaces and have tried to do this. First I tried to get DHCP working so I could connect the Debian machine to the net and this proved successful. I edited the interfaces file to look as follows:
# The loopback network interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
Then I tried adding a static IP address to the machine. As this is a network purely between two machines I made up the IP addres and used 192.168.0.1 and used a NetMask calculator to give me a NetMask of 255.255.255.254 (I told the calculator there would be 2 machines on the network). I then edited the interfaces file as follows:
# The loopback network interface
auto lo
iface lo inet loopback
[code]....
I re-booted the machine (ifdown eth0 followed by ifup eth0 keeps saying that eth0 hasn't been configured - a problem there that I don't understand), but during boot up time it failed to assign the Static IP address to eth0 and made me go into SU mode. To fix it I simply replaced the interface file with the static IP inputs with the file that had the DHCP entries (I'd made a copy of the DHCP file), and re-started the machine. Everthing came up fine. So the first question is how do I get a static IP address to be assigned to eth0 such that whenever I shut down and restart the machine the static IP address is always loaded?
The second question is around creating the network via the cross over cable. From what I've found via Google, all I should have to do is create a static IP address on the Debian machine and a static IP address on the Voyager machine. Once they're connected by the cross over cable they should see each other. Is that correct, or do I have to do anything else?
Using ubuntu 10.10 (pinguy OS) i connected an ethernet cable from my girl's macbook pro to her lenovo ideapad s10-3t to transfer some DS9 episodes onto it. new enough to linux to have not been able to figure out how to access the files on the mac, so i disconnected the ethernet, and the wireless hasn't worked since. tried everything i know, and googling for a while (as well as searching again on this forum) to no avail.
Just before linking the 2 computers via ethernet, the wireless worked fine on the ideapad, always had; but not so after the ethernet connection that did nothing other than apparently kill the wireless. an "lshw -C network" command tells me i have a BCM4313 wireless card, and *-network UNCLAIMED. also, if i launch "install additional drivers", i see that the proprietary driver is not active.
How could merely plugging in an ethernet cable that happened to be conncected to a MBP running OSX.6 do that? and will that happen again? i thought linux was supposed to play real nice with other OS's, so why did a simple file transfer kill my wireless connectivity? i have no access to internet via ethernet cable, so i cannot just download the driver i need now. shouldn't it still be in the computer still? somewhere? is there a simple solution to this, or has the wireless driver been wiped out by plugging in the ethernet? is this a bug that should be reported?
how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:
Three Ethernet Cables
Two Printer Peripheral USB Cables
The Two Computers
A 2GB Flash Drive
That is all I can think of right now. I do not want to use CDs. In a way, I would like to do a network boot. So, how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? I want to put Xubuntu on it, and earse the rest of the Hard Drive. The computers getting this are the iMac G3s and the eMac G4. The eMac has 256MB RAM, 40GB HDD, and a 700MHz processor. Two iMacs have 128MB RAM, 40GB HDD, and a 600MHz Processor. The other iMac is the same as the rest but has a 500MHz processor.
I m nokia mobile to connect to internet in 11.2 configured it all in n/w manager with phone number *99#
APN: XYUX(as given by provider)
Also wrote the dns in resolv.conf but all in vain . it is not connecting neither dialing any number just shows "activating" but with no progress earlier in 11.1 i used kinternet (but i couldn't find it here) is there not any other dialer ? as i ve heard that n/w manager is quite troublesome.
Can Cat5e RJ45 connector crimper be used for Cat 6 connector because I heard cat 6 connector is different from cat 5e connector and also same question for cable tester can cat5e cable tester be used for cat 6 cable?
View 1 Replies View RelatedPerhaps someone has run across this problem I loaded CentOS 5.3 on an AOpen MP45-BDR workstation. It uses the Mobile Intel 4 Series Express Chipset for the video graphics. It is officially identified as: GM45 chipset (Intel GMA X4500 MHD).
There are two problems. Using the "intel" video driver, the X11 server does not appear to support digital video cable (DVI interface). It is also stuck in 1024x768 resolution and I want it to display in 1280x1024 resolution. Using a DVI cable, the system boots and displays properly (GRUB and boot messages) until the X11 server starts, then the signal is lost. The system is configured with a dual boot (Windows XP Pro) and Windows operates properly and supports all of the features of the video graphics chipset (DVI and full resolution). So the hardware is ok.
The "intel" video driver has a description of "Experimental ..." so maybe there is an update to this driver or a replacement driver that supports this chipset. I checked the buglist and found CentOS bug ID 2951 which is somewhat similar. The user was utilizing the "intel" video driver and it locked his system but changing the driver to i810 was a work-around. My system does not lock. I did try the i810 video driver but the X server did not like it - it would not start. This makes sense since the description of this driver specifies support for the older Intel onboard chipsets.
[Code]...
