Ubuntu :: Install Calibre From Source?
May 14, 2011Basically I'm looking at the Calibre source code tarball
[URL]
I'm clueless as on how to compile and install Calibre from the tarball source code.
ADVERTISEMENT
Ubuntu :: How To Install Calibre Program
Apr 28, 2010I'd like to install the program Calibre, which does have a Linux installation, but I haven't the faintest idea how to do it. I don't even know how to find out if I have the requirements or not.
Here is the link, if anyone can shed some light. [URL]
Ubuntu :: Unable To Install The Calibre
Jan 28, 2011I installed 10.10 on this (new) system a couple of months ago. Haven't had it attached to the network for a couple of months (for viewing documents) Yesterday I did connect, let Update Manager do its thing (installed ~180MB of updates). Everything went fine. Today, was planning on installing Calibre on this and couldn't remember what version I had installed, so I checked...
> System > About Ubuntu now reports that I have 11.04 (Natty Narwhal) installed. I thought 11.04 wasn't to be released until April 2011.Everything running fine (no obvious changes on the desktop at all)...
Fedora Installation :: Use The Source Dvd To Install The Source Package?
Feb 19, 2010installed the fedora 12, but dont know how to use the source dvd to install the source package.
View 3 Replies View RelatedUbuntu :: Calibre Causes Gnome To Restart?
Feb 9, 2011Recently I tried to install calibre ebook management software from the Ubuntu Software center and it installed fine as expected, ran fine from the applications menu as expected (for the initial run) went through the wizard and clicked next. All of a sudden I was presented with a login prompt. I thought I must have hit a hot key accidentally, so I logged in and it restarted fresh not like the desktop was locked. So I ran calibre again and it did the same thing. I uninstalled calibre and went about compiling from source, after all of the dependencies were met and it compiled and installed ran it again and it logged me out again.
System:
Ubuntu 10.10
Kernel 2.6.35-25-generic
Gnome 2.32.0
Memory 1GB
Pentium 4 2.6ghz
Ubuntu :: Develop Applications Like Calibre
Feb 17, 2011I'm quite in acquaintance wit C,C++,Java etc. And have been using Ubuntu for quite a long time. how develop applications, Applications like calibre, Etc. I've also installed Eclipse, completely ignorant of it utilisation.
View 2 Replies View RelatedUbuntu :: Converting Epub To Mobi Using Calibre?
Dec 21, 2010I have Calibre installed and I'm trying to convert epub file format to mobi. However, when I try to convert any file it stalls at 67%.
View 1 Replies View RelatedOpenSUSE :: Calibre Will Not Startup
Nov 1, 2010I just installed Calibre, but it doesn't start. It just gives the waiting clock for a moment, and then the pointer again. Does anyone know how I can get this program to work?
View 4 Replies View RelatedUbuntu :: Calibre Failed To Convert Epub To Mobi?
Feb 6, 2011I received this message in the terminal window when I tried to convert an ebook to the mobi format.
ICE default IO error handler doing an exit(), pid = 1912, errno = 32
Exception in thread Thread-3 (most likely raised during interpreter shutdown):
Traceback (most recent call last):
File "/usr/lib/python2.6/threading.py", line 532, in __bootstrap_inner
File "/usr/lib/calibre/calibre/utils/ipc/server.py", line 167, in run
[Code]...
Debian :: Calibre Not Recognizing Kindle On Wheezy
Feb 22, 2015The kindle device is seen as per lsusb:
Code: Select allmax@max-debian:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
[Code] ....
But this is my output of calibre debug device detection
calibre 2.20 isfrozen: True is64bit: True
Linux-3.2.0-4-amd64-x86_64-with-debian-7.8 Linux ('64bit', 'ELF')
('Linux', '3.2.0-4-amd64', '#1 SMP Debian 3.2.65-1+deb7u1')
Python 2.7.9
Linux: ('debian', '7.8', '')
[Code] ....
what does exactly means that device error?
OpenSUSE :: Unable To Run Calibre (E-Book Reader)
Feb 22, 2011Using openSUSE 11.3 (64-bit), KDE environment. I am very, very new and inexperienced with Linux... I would like to download and read some e-books using my desktop PC. I poked around the Internet with Google and found several recommendations for an e-book reader called Calibre. So I found it in the openSUSE repository and installed v. 0.6.53-3.3.1 using YaST2. But the darned thing does not seem to work -- I click on the icon and nothing happens!!
View 9 Replies View RelatedDebian :: Calibre Ebook Software Freezes When Trying To Convert
Feb 25, 2011I just updated to Calibre version 0.7.44 in Debian testing, on an amd64 system. Conversion worked with previous version, but now Calibre freezes as soon as I choose convert individual book. When I run top, I see that python is taking 100% of the cpu. The only way to stop calibre, which shows a grey screen, is to kill python. I got this message in the terminal after it shuts down;
[Code]...
If there is not way to fix this, Is there a way I can just reinstall the previous version of Calibre, even though only the new version is listed when I check in synaptic?
Software :: LibreOffice Writer And Calibre And EPUB Format?
Jun 4, 2011I wrote a document using LibreOffice Writer. It has heading styles and a generated table of contents.I saved the document to ODT and as PDF. I loaded the PDF into Caliber as an e-Book.
I converted the PDF to EPUB format for Nook(tm) devices. I stored the EPUB to my 'droid phone and loaded it into an EPUB reader. VIOLA! I can see the table of contents as page #1. I cannot see any other pages in the EPUB. I can read the original PDF just fine.
Q1. What must I do along the way so that I have a useful EPUB? (I don't need fancy just complete and readable.) Q2. Are their things that I need to do to the PDF in Calibre? Q3. Are there things I need to do in LibreOffice Writer or to the generated PDF before I convert it to EPUB with Calibre?
OpenSUSE Install :: 11.4 Cannot Install RPM Or Execute Updates: Media Source Does Not Contain The Desired Medium
Mar 14, 2011Since I've installed opensuse 11.4 instead of 11.3, I cannot install .rpm packages nor execute updates. I get the following message: "There has been a (probably temporarily) when connecting to the software source/repository" (own translation) details: Media source [URL] does not contain the desired medium So, probably there is something wrong with my software sources. Could anyone give a suggestion to repair this since I'm not a linux expert and would like to install new software on my newly updated machine.
View 9 Replies View RelatedServer :: Install Source Not Getting Recognized During Para Virtual Guest Install Of Xen
Sep 20, 2009I am trying to install CentOS guest on CentOS 5.3 host. I have installed all the requirements for the same. As per documentation, only NETWORK install is supported if the guest is to be installed as paravirtalized.I copied the CentOS DVD in /home directory with folder name centos52 and exported it through NFS. When I run Virtual machine manager and give installation path as: nfs:<ip address of host>:/home/centos52 , the system while trying to create the storage fails and throws following error:Unable to complete install: 'Invalid install location: Mounting location nfs://<ip address of host>:/home/centos52 failed'
View 1 Replies View RelatedUbuntu :: Can't Install From Source?
Jan 16, 2010I was trying to install a program from source. I cd'd to the directory then ./configure'd. It was configuring fine until this.
Quote:
checking for GTK+ - version >= 2.4.0... no
*** Could not run GTK+ test program, checking why...
*** The test program failed to compile or link. See the file config.log for the
*** exact error that occured. This usually means GTK+ is incorrectly installed.
configure: error: *** GTK+ version 2.4.0 not found! How can I fix this?
Ubuntu :: Open Source Virtual Machine - Study The Source In Order To Create My Own?
Jun 28, 2011Is there any open source virtual machine so i can study the source in order to create my own? i'm gonna write my own, so it doesNT matter if license does not allow further development of the code.
View 1 Replies View RelatedUbuntu :: Source Code Of The Krnel From The Kernel.org - Source Trees Organization
Apr 11, 2011i am already a little bit familiar with linux and now i want to know better the linux OS. i have downloaded the source code of the krnel from the kernel.org and i dont understand the linux source trees organization, so can somebody do me a favor and give me a link to some internet page (or at least a book) that explains that?? i have searched in the internet with the tag:::linux source trees organization and i have not found nothing interesting
View 1 Replies View RelatedUbuntu :: Trying To Install Audacious From Source
May 19, 2010I am trying to install audacious from a tar.gz. Here is the ./configure output
Code:
elliotn@elliotn-desktop:~/Desktop/audacious-2.3$ ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no .....
Configuration:
Install path: /usr/local
Use one plugin dir:
Allow user plugin dir: yes
Additional debugging output: no
Automatic character code detection: yes
D-Bus support: no
Session management (eggsm) yes
XSPF playlists no
SSE2: yes
AltiVec: no
WARNING! DBUS support is disabled. This means that various features the user might expect (such as remotely adding files to session via commandline) will not work! If I type make it dies make but I see nothing under sounds if I type make here is the output:
Code:
elliotn@elliotn-desktop:~/Desktop/audacious-2.3$ make
Entering directory src.
Entering directory libeggsmclient.
Successfully generated dependencies.
Leaving directory libeggsmclient.
Entering directory libaudcore .....
Ubuntu :: How To See Source Code Of Open Source Software
Sep 12, 2010I want to see the source code of smplayer software.from where i can see source code of open source softwares?
View 9 Replies View RelatedUbuntu Servers :: How To Install GUI (from Source / Offline)
Jan 20, 2010I just installed ubuntu server 9.04. Now i wanna install GUI on that such as Xinit, and others, theni stuck because i wannna install it without connection (from source / offline).
View 4 Replies View RelatedUbuntu :: Correctly Install A Tar.bz2 Source File?
Apr 18, 2010Since the time I have moved to Ubuntu..I am finding it difficult to do work on images.... since in Windows I was using Photoshop.. But I tried running photoshop using wine and stuff but either didn't work or caused a lot of problems. So I found a new solution GIMP that is very close to Photoshop but not exactly like that.Now I got another solution that is some modification to GIMP called GIMP shop.
I downloaded the Linux version and I got a file gimp-2.2.8.tar.bz2 I was always confused in how I can install these source... there is no help on their website. installing these source files.... since I need to do many images manipulation and editing for my work.
Ubuntu Servers :: Install OpenSSL From Source?
May 9, 2010I saw, there is a new OpenSSL v 1.0.0 and I wanna ask how to install it. I have this server now Apache/2.2.14 (Ubuntu) PHP/5.2.10-2ubuntu6.4 with Suhosin-Patch mod_ssl/2.2.14 OpenSSL/0.9.8k
And I try to install by reading the Install file in the package but I still have 0.9.8k.
$ ./config
$ make
$ make test
$ make install
Ubuntu Installation :: Install Nautilus From Git Source?
Aug 1, 2010I downloaded the source code with the following command :
[code]...
Then, I run the autogen.sh script
[code]...
Ubuntu :: How To Install Program From Source Code?
Nov 2, 2010I am wonder if somebody could take the time to teach me to install or compile a program from source.I have downloaded ZSNES from sourceforge but cannot figure out how to install it from the command prompt or using the package manager.
View 9 Replies View RelatedUbuntu :: Gnome-do Failed Install From Source?
Dec 2, 2010I attempted to install from source. Following the instructions on the gnome-do website verbatim, I received several errors. Gnome-do was installed (in Gnome menu), but would not run. Realizing I was over my head and was out of time, I ran "sudo make uninstall", restarted my machine for good measure, then installed gnome-do from my software manager. It still won't run. Running gnome-do from terminal gives the same error as when I attempted to install from source:
Unhandled Exception: System.InvalidOperationException: Could not read add-in description
at Mono.Addins.Addin.get_Description () [0x00000] in <filename unknown>:0
at Mono.Addins.AddinSessionService.CheckHostAssembly (System.Reflection.Assembly asm) [0x00000] in <filename unknown>:0
[Code]....
I used purged gnome-do and plugins, restarted, and reinstalled, but am experiencing the same problem.
Ubuntu :: Install Python Program From Source?
Dec 16, 2010I downloaded this programs source and I'm having a hard time figuring out how to install it. I assume it is python source? I tried downloading the debian file but could not figure out how to install it aswell. I downloaded the software from [URL]
View 9 Replies View RelatedUbuntu :: Install Programs Using Livecd As A Source?
Apr 5, 2011I'd like use a livecd of ArcheOS to install some applications into my Kubuntu 11.04 system. Is this possible?
View 2 Replies View RelatedGeneral :: Use Rpm And Key To Install Red Hat 9 Source CD?
Aug 30, 2010I want to look at Red Hat 9 source code on the same PC I installed RH9 on. Yes, I know that is old. The CD package has 3 source CDs and each has a key. I try using:
rpm -i package_name.rpm
and I get warning saying NO_KEY. Also, where is the source installed?
Ubuntu Installation :: DELUGE : Install From Source File?
May 31, 2010How to build .deb package from deluge-1.3.0_rc1.tar.bz2 or from deluge-1.3.0_rc1.tar.gz downloaded source files?
and
How to install Deluge-1.3.0_rc from deluge-1.3.0_rc1.tar.bz2 or from deluge-1.3.0_rc1.tar.gz downloaded source files.
How to edit source.listfile with Deluge auto-update?
OS: Ubuntu 10.04 Lucid Linux
Desktop PC, Intel Core2 Due.