I'm quite in acquaintance wit C,C++,Java etc. And have been using Ubuntu for quite a long time. how develop applications, Applications like calibre, Etc. I've also installed Eclipse, completely ignorant of it utilisation.
View 2 RepliesKernel 2.6.21.5, slackware 12.0 Kdevelop 3.3.91 writing a C program of a pretty good size and, when I am done compiling, I'll have to begin debugging. I know of dbg, but was thinking in one of those integrated development environments (IDEs). Looking into my HDD, I found a KDevelop package and began to see what it was about. The documentation (help) is copious and it seems I will never get to the point in the docs where I'll know if it serves my purpose. For I'm afraid it is intended to develop appls for KDE, when in reality, my appl runs in a text console. So that is the question. Is KDevelop mainly intended for developing GUI applications?
View 7 Replies View RelatedI'd like to install the program Calibre, which does have a Linux installation, but I haven't the faintest idea how to do it. I don't even know how to find out if I have the requirements or not.
Here is the link, if anyone can shed some light. [URL]
I installed 10.10 on this (new) system a couple of months ago. Haven't had it attached to the network for a couple of months (for viewing documents) Yesterday I did connect, let Update Manager do its thing (installed ~180MB of updates). Everything went fine. Today, was planning on installing Calibre on this and couldn't remember what version I had installed, so I checked...
> System > About Ubuntu now reports that I have 11.04 (Natty Narwhal) installed. I thought 11.04 wasn't to be released until April 2011.Everything running fine (no obvious changes on the desktop at all)...
Recently I tried to install calibre ebook management software from the Ubuntu Software center and it installed fine as expected, ran fine from the applications menu as expected (for the initial run) went through the wizard and clicked next. All of a sudden I was presented with a login prompt. I thought I must have hit a hot key accidentally, so I logged in and it restarted fresh not like the desktop was locked. So I ran calibre again and it did the same thing. I uninstalled calibre and went about compiling from source, after all of the dependencies were met and it compiled and installed ran it again and it logged me out again.
System:
Ubuntu 10.10
Kernel 2.6.35-25-generic
Gnome 2.32.0
Memory 1GB
Pentium 4 2.6ghz
Basically I'm looking at the Calibre source code tarball
[URL]
I'm clueless as on how to compile and install Calibre from the tarball source code.
I have Calibre installed and I'm trying to convert epub file format to mobi. However, when I try to convert any file it stalls at 67%.
View 1 Replies View RelatedI just installed Calibre, but it doesn't start. It just gives the waiting clock for a moment, and then the pointer again. Does anyone know how I can get this program to work?
View 4 Replies View RelatedI received this message in the terminal window when I tried to convert an ebook to the mobi format.
ICE default IO error handler doing an exit(), pid = 1912, errno = 32
Exception in thread Thread-3 (most likely raised during interpreter shutdown):
Traceback (most recent call last):
File "/usr/lib/python2.6/threading.py", line 532, in __bootstrap_inner
File "/usr/lib/calibre/calibre/utils/ipc/server.py", line 167, in run
[Code]...
The kindle device is seen as per lsusb:
Code: Select allmax@max-debian:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
[Code] ....
But this is my output of calibre debug device detection
calibre 2.20 isfrozen: True is64bit: True
Linux-3.2.0-4-amd64-x86_64-with-debian-7.8 Linux ('64bit', 'ELF')
('Linux', '3.2.0-4-amd64', '#1 SMP Debian 3.2.65-1+deb7u1')
Python 2.7.9
Linux: ('debian', '7.8', '')
[Code] ....
what does exactly means that device error?
Using openSUSE 11.3 (64-bit), KDE environment. I am very, very new and inexperienced with Linux... I would like to download and read some e-books using my desktop PC. I poked around the Internet with Google and found several recommendations for an e-book reader called Calibre. So I found it in the openSUSE repository and installed v. 0.6.53-3.3.1 using YaST2. But the darned thing does not seem to work -- I click on the icon and nothing happens!!
View 9 Replies View RelatedI just updated to Calibre version 0.7.44 in Debian testing, on an amd64 system. Conversion worked with previous version, but now Calibre freezes as soon as I choose convert individual book. When I run top, I see that python is taking 100% of the cpu. The only way to stop calibre, which shows a grey screen, is to kill python. I got this message in the terminal after it shuts down;
[Code]...
If there is not way to fix this, Is there a way I can just reinstall the previous version of Calibre, even though only the new version is listed when I check in synaptic?
I wrote a document using LibreOffice Writer. It has heading styles and a generated table of contents.I saved the document to ODT and as PDF. I loaded the PDF into Caliber as an e-Book.
I converted the PDF to EPUB format for Nook(tm) devices. I stored the EPUB to my 'droid phone and loaded it into an EPUB reader. VIOLA! I can see the table of contents as page #1. I cannot see any other pages in the EPUB. I can read the original PDF just fine.
Q1. What must I do along the way so that I have a useful EPUB? (I don't need fancy just complete and readable.) Q2. Are their things that I need to do to the PDF in Calibre? Q3. Are there things I need to do in LibreOffice Writer or to the generated PDF before I convert it to EPUB with Calibre?
i was working in microsoft visual c++ but i have a plan to move Linux, So i installed ubuntu then how to program c++ application in ubuntu
View 1 Replies View RelatedI installed Mono Develop on Ubuntu 10.04 X86 . What I found when I tried to design a GUI using the GTK designer is that the tool box which houses GUI widgets does not appear. Is there any fix or solution to this?
View 1 Replies View RelatedIs there any plan to develop a native KDE (K)ubuntu one client?
View 4 Replies View RelatedWhere would I begin if I want to develop my own distribution? I have the kernel 2.6 downloaded, so obviously I need that. Anyone have a decent site or book I can look at? I want to use KDE/Gnome, with a GUI installer. I know a bit of C/C++, and I'll need a good, (and cheap if possible) book to brush up.
View 5 Replies View RelatedDo you need to know C++ to develop software. I'm an advanced PC user. Is it pretty easy to pick up. What kind of capabilities can I tap into?
View 14 Replies View RelatedI would like to know what should I do to be able to develop firmware for a system.I have been a hobbyist kernel programmer and as an interest I have written device drivers.Now I would like to jump to firmware development.
View 2 Replies View RelatedI just started taking OS implementation class, and you might wonder why im not asking this from my professor, well I have but he said its too soon.I want to know that if someone were to develop a new kernel , where would they start ?If you could just let me know where to start I would appreciate it very much.
View 2 Replies View RelatedI have installed mono develop 2.4 from terminal successfully. But surprisingly I could not find any icon on my desktop to launch Mono Develop. How can I solve the above issue and how can I create a icon on desktop to launch Mono Develop.
View 1 Replies View RelatedIf I choose Ubuntu develop php app, which edition should I get, Ubuntu Server Edition or Ubuntu Desktop Edition?
View 3 Replies View RelatedI'm developing a server application for ubuntu server, clients will connect to in through socket connection. It's in beta stage and under heavy development. At the moment lots of people are using it and it is updated almost every day. So I seed to seriously consider security issues and in the same time don't restrict myself too much. Now I have two questions:
Where is the appropriate place to store its files? Application consists of executable, some config files and startup script. But I don't want to spread it accross the filesystem just store in single folder for convenience since app is under heavy development. My guess would be to create new dir under /var. Right now I store it in my home folder.
Do I need to create separate user for it? I start it up using init.d script via sudo -u me. I want to restrict its access to system for security purposes but in the same time I want to be able to update it through FTP and not run into access issues (user that uploads it is different from user that runs it, and it sometimes need write access to some files). How to do that?
OK, so i have been thinking of developing my own distro. After experimenting with LFS(Linux From Scratch), i now know even more Linux, but i could not find out to create a Distro. Now, i want to use an existing Linux Distro, modify source code, and develop my own Window Manager(like GNOME and stuff.. i HAVE googled it, but it was nothing good there.) I also know that Elive has a good window manager, but i want to modify it a little. Do you guys know a good way to start, or a good website with resources i can use?
View 11 Replies View RelatedAs an owner of the HP Touchsmart TM2T 2100 CTO I had to search on the internet to fine tune Ubuntu Netbook Remix, like auto-rotate.I am a Linux noob.Is there an expert who can develop an installation script to get the fine-tuning done by executing that script?I am thinking about installing auto-rotate, maybe fixing the ATI-card, multitouch,I know multitouch works out of the box, but I red some drivers can be updated to get the latest gestures and so on.
As Linux user who is not familiar knowing what he really is doing, such a script can be handy. It also helps new TM2T owners to work fast with the best OS there is: Ubuntu!
What desktop environment should i install to develop Gnome apps? As i cna see ,the required tools are
Anjuta - 3.0
Devhelp - 3.0
Glade - 3.10
and most of these versions are not available for ubuntu. Tell me what DE to have in order to do that!
Any useful IDE and GUI pkg that I can use under Linux to develop a software utility in C#? It would be good if the license for the GUI pkg allowed my code to be sold and not require it to be given away for free.
View 2 Replies View RelatedBut started to develop Embedded linux in ARM9 controller.
View 12 Replies View RelatedThere isn't a package for puppy linux and I have no idea how to install it.
View 1 Replies View RelatedHow can I create packages for Windows7 and Linux using C# in mono-develop ? Will the packet be directly installed under Windows7 ?
View 1 Replies View Related