#lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
How to mount usb storage device in my ubuntu 10.10.
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
Can I auto-mount my storage HDD? If so how?
View 4 Replies View RelatedI would like to have my USB stoage devices to be mounted under my $HOME automatically when I insert them. Those devices have been partitioned, formated with XFS and also given a UUID for this purpose. I think I should use udev's rules and have also done some attempts like this one:
SUBSYSTEM=="usb", ENV{ID_FS_UUID}=="c195a25a-c03e-4cd8-9d86-9b9219acfeb4", OWNER="uqbar", GROUP="uqbar", RUN+="/bin/mount /dev/%k /home/uqbar/work"
Of course it doesn't work. I'm running Kubuntu 9.10 and Ubuntu 9.04 and would prefer a solution not tied to a specific desktop.
My 11.04 installation is running beautifully in VM on ESXi. I'm trying to add storage so I added the disks, assigned them in vmware to the vm, then tried to mount them when I received the error code...
my setup:
HP Microserver, booting vmware from USB drive. Hardware RAID card (Adaptec RAID 2405), 2 x 250GB HDD in RAID1 (datastore1) with VM's, 2 x 2TB HDD in RAID1 (datastore2) - the storage I'm trying to add.
A search of the above errors yielded many results, all of them were different scenarios to mine.
Using Fedora 15 64 bit. The problem is when I put in a USB stick (directly into USB port front or back), or SD memory card via Card reader, they take a long time to auto mount. About 30 seconds. I've tried a few different USB sticks and memory cards. Once mounted they work fine. This is a new install, been running for a few weeks, but the problem only seems to have started in the last few days. Also, not sure if it's related, but now Shotwell takes about 30 seconds to start. The screen comes up, but the interface in non responsive for around 30 seconds. Both USB and Shotwell problems seem to have started at the same time.
View 3 Replies View RelatedRecently I upgraded from my long outdated Kubuntu 6.06 dapper installation to the new LTS, 8.04 hardy. Ever since everything has been working smoothly and going well, but there's one problem: I can't mount either my external USB HDD or my SD card in my USB card reader.When I try to mount either in Konqueror (Media:/) by right clicking on the device and clicking Mount I get this:Code:mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other errorIn some cases useful info is found in syslog - try dmesg | tail or soI also get this in the console:Code:mattmodica@Dothan:/media$ sudo mount sda1[mntent]: warning: no final newline at the end of /etc/fstabmount: can't find sda1 in /etc/fstab or /etc/mtabmattmodica@Dothan:/media$The first method I tried (doing it in Konqueror) worked in dapper 6.06 just fine.If I run dmesg | tail in console I get this:
Code:
mattmodica@Dothan:~$ dmesg | tail
[17254792.288000] sdc: assuming drive cache: write through
[code]...
Since I use openbox with some packages from Xfce4 (mainly for convenience) I get most stuff "for free" as it were when using openbox, but I can't figure out how to mount android devices in a simple way. I can either do it manually, or install some other file manager that has this capability. This leads me to my question, I've noticed that if I install Nautilus, which automatically mounts android devices OotB, I get this functionality in Thunar as well. This leads me to believe that there is clearly a dependency package of some kind installed when running apt-get install nautilus that enables it, It'd be great to get this functionality in Thunar without having all the nautilus packages just littering about for no good reason. the required package is gvfs-backends, which I should have realized when I was unable to browse smb:// addresses. You forget a lot when you only make a fresh install once every 2 years or so.
View 0 Replies View RelatedI am trying to play or backup various DVDs i have recently bought and keep geting this error message: (mind the wrap) org.freedesktop.hal.storage.mount-removable auth_admin_keep_always <-- (action, result) from KIOExec What in tarnation is going on. How about a useful error message.
View 9 Replies View RelatedI would like to download a few (591)images from the Galaxy S phone. Samsung have advised me that to do that I need to place the Galaxy S phone on Mass storage, whivch I can do and plug the phone USB cable to the PC and manually mount the USB. The Galaxy S firmware 2.1-update1 doesn't support automatic mounting! The Galaxy S has an Android platform Kernel version 2.6.29 with root @SE-S604 #2. I'm running Ubuntu 10.04 on a AMD Athlon(tm) XP 1700+ with 1G of ram. It's the manual mounting of the USB connection
View 1 Replies View RelatedHow to you mount a removable storage in Kubuntu 9.10 that is running on a dual-boot machine with Microsoft Windows XP.
View 4 Replies View RelatedI'm interested in buying a new hardware for my company. The old server (now 10 years old) should be replaced with a new one. Till now, I was looking on different hardware suppliers, boards and different other places. I found a Tyan board [URL]. The hardware spec is quite interesting and the board would fullfill our claims.
how both storage devices will be supported by Ubuntu or Debian??
- SATA-Controller: AMD SP5100
- SAS-Controller: LSI 1068E
My Canon PowerShot A470 + CHDK can write to SD-cards that are "locked" (the lock switch is used to make the card bootable), but GNU/Linux
`/dev/mmcblk1': Read-only file system
(I'm using "Texas Instrument 5-in-1 Multimedia Card Reader")
So I have to switch that switch on and off again and again. ("unlocked" to write to the card in Linux, "locked" to boot the camera from it).
How to force locked card to be writable in GNU/Linux?
I am trying to do the cluster storage with the Rock Cluster storage operating system . I have install the rock cluster on the main server . and I want to connect the client with the PXE boot . when I starting the client then it boot from the PXE boot into the mode of compute node. but it ask the where is to be stored the I have give the path..then server says that not able to find the directory path.
Steps:-
1) insert-ethers
2) client is started with the PXE boot.
3) it detects the dhcp .
4) At last it demand where is to be started by cd-rom, harddisk ,nfs etc.
then I started with the nfs and I have given the lanIp of server.and server is detecting the client but client is not finding the filesystem directory. into export partition directory but it is not taking path.
PATH:-
/export/rock/install it is not finding this path then it is not able to start the o/s from PXE boot..Is there any solution and manual of rock or anyother solution then u can reply to me...
I am trying to get raid 5 set up as storage. I have karmic with myth set up on primary drive and wish to just use raid 5 for storage with jfs filesystem.
View 2 Replies View RelatedI'm in the process of duplicating all the data from my existing filesystems to a new storage solution. I know it is not recommended to do so but this will be a *lot* faster then having to reinstall and reconfiguring the system from scratch...I've synchronized the filesystems using rsync, used the following command line for that:
Code:
rsync --recursive --acls --xattrs --delete --force --one-file-system --links --perms --owner --group --stats --specials --devices --human-readable / /mnt/sde1
rsync --recursive --acls --xattrs --delete --force --one-file-system --links --perms --owner --group --stats --specials --devices --[code]....
To make sure all data is mirrored properly, the next step is to boot into a live system and rerun rsync to copy any previously locked/altered files to the new storage. After moving this, I know I have to edit /etc/fstab on the new storage to make it match the proper UID for the drives. I also have to update grub and install grub into MBR of the new storage.
I'm now having to access a lot of data on a portable hard drive on a regular basis. The drive needs to be used with three different Windows systems, three Ubuntu machines and two slackware units. The data is backed up once per week.
I have been using Ext2IFS to access the data (stored on Ext3) from Windows but keep having problems. Obviously Ubuntu and Slack have no trouble reading or writing to the drive. Additionally, some sensitive data will be put onto the drive shortly and I would like to encrypt it.
What is the best solution here? Is NTFS reliable enough and is data access and writing reliable enough from Linux? Can I encrypt NTFS and still leave it accessible by Linux? What is the best software to encrypt the drive with (if I can) that is accessible by both Windows and Linux?
I created a dual boot on my computer with windows vista and ubuntu using the wubi ubuntu installer for windows, and my ubuntu boot is limited to 15gb of hard drive space. My hard drive in actuality has about 150gb left on it. How do I expand the amount of storage ubuntu is allowed to use?
View 6 Replies View RelatedI am getting seriously pissed off and dissappointed at the way things are handled here i bought some music from rhythmbox and after a long journey in disconnections and reconnections i finally got the files in my U1 storage ( rhythmbox still says "Transfering to ur U1 storage" in mydownloads ) now how am i supposed to download all this files??? i can't download an entire folder in web browser ( i can only do one file at a time ) and i am not able to find another way through rhythmbox or anywhere else after reading one hour of irrelevant tutorials and faqs ( i have a headahe at this time, so even if there was a way i probably would not understand it :D )
is there a way or do i just have to suffer downloading all my files one by one ???? and btw: i had to do all this on a virtual machine becuz noscript got in the way of adding my pc to the account ( w/ allowing all the servers it still blocked something) and rhythmbox crashed somewhere in the process and after restarting my pc, it kept getting stock when pressed the check out button any way that's not important i actually prefer it this way to have one dedicated virtual machine for U1 music
My friend bought a new PC, and he's duel booting Ubuntu 10.04LTS and Windows 7 Ultimate. At first I tried partitioning the hardrive using fdisk in Ubuntu, but it couldn't find hda. After looking in /dev/, there wasn't hda, or any sd* devices. I looked in gparted and used the installer afterwards and both came up with nil. I installed Windows, updated the BIOS using the utility that came with the mobo, and tried seeing if Ubuntu could detect my hardrive and it couldn't. I even turned ACPI off when booting and that didn't work either.
The motherboard is a new Gigabit with 3 PCIe slots and a USB3.0.
is there a way or terminal command to disable access to a USB storage device upon insertion given that it is not permitted?
View 5 Replies View Related[URL]
In the above link am using for the Disable for USB device. how i can re enable the USB devices.
In our school I was thinking of moving to virtual desktops for the students, that would revert to a pure state upon every log out. No changes preserved after a session. We use Google docs for office, so that works. But where can we store stuff like Inkscape drawings?As far as I can tell Google storage can't be reliably mounted yet on Ubuntufor a good cloud storage option that we can quickly log into that will give us a folder for storage online?
View 1 Replies View RelatedI am running Karmic on a stripped laptop, and running it off a usb thumbdrive.Its purpose is mainly as a slide show/video show inset in a tableI did not really want to go out and buy a HDD, since it does not need to store that much. Then I went to aldi and they had 8gb flash drives for $5, so I got 6. The ultimate question comes down to the best way to make use of them. I ordered a 7 slot USB hum off ebay for cheap, and I was going to go from there. would it be easier/better to just plug them in and make links to them from the normal folders and just operate directly from there, or is there a better option. I guess a usb raid array could be neat
View 4 Replies View RelatedI'm running Ubuntu 9.10 with Kvm. I've used a howto to configure my network. Seems to work fine, I've installed the Virtual Machine manager, when I go to create my Virtual Machine, I see the the image is automatically created in /var/lib/libvirt/images. I have a totally separate path for my images. How to I configure a different image directory
View 1 Replies View RelatedI've been backing up a lot of my computer data for 2 years now and it has added up to a terabyte, so I went to bestbuy and bought a 1.5 terabyte external hard drive. I went home and I moved all my data on to it.Now it is starting to fail! As soon as I heard clicking noises I copied all the files over back to my original hard drive.
I had alot of personal information on the 1.5 TB hard drive that is failing(it is still working though), and incase when I try to take it back and they restore it, I do not want them looking through my stuff. I have tried the shred command but thats going to take forever just to overwrite one terabyte once.Will a format remove all my personal files from recovery? What are some other things I could try?
I have installed mythbuntu and all is going well! A couple of questions.
1) What is a storage group and what advantage do they have ?
2) When I select "watch videos" it takes me to the next window which is called storage group. There is a question mark and is called storage...
I have attached picture.
I wanna try to install ubuntu server on my poweredge 1955 with emc storage, but on the partitioning step it says:
"the following partitions will be formatted:
...<here goes all the lvms in the storage>..."
I already tried all the options in the partitioning step without success
I have learned a little about LVM through tinkering but on my new setup I am having trouble. I am running Ubuntu 9.10 Server with Gnome desktop 64 bit. I started with a 2TB HD and setup LVM with a LV for my data ("Storage) that mounts at /storage. That is full so I then added a second drive 500GB, formatted, added to VG and then extended the LV "Storage" with the 500GB partition. Now the LV reads as ~2.2TB which is right. Everything is successful up to this point. Except now when I go to the mounted LV at /storage Ubuntu shows it as full and only as ~1.7TB. The 500GB were never added!
View 2 Replies View Relatedhow to keep all my history --online storage like xmarks problem is i m weird person and like to keep massing up with my pc.. so have to format it more than usual so keeping my important history is hard so is there anyway to keep it online
View 2 Replies View Related