I created a dual boot on my computer with windows vista and ubuntu using the wubi ubuntu installer for windows, and my ubuntu boot is limited to 15gb of hard drive space. My hard drive in actuality has about 150gb left on it. How do I expand the amount of storage ubuntu is allowed to use?
View 6 Replies
I have a 300 Gb Hard drive, I used to have windows xp on it but decided to install ubuntu, so what I did (after some suggestions) was to create 3 partitions, one of 30 Gb for windows (I use Adobe software), one of 10 Gb for Ubuntu 9.10 and the rest as a common partition used for storage. Started ok, but I really got hooked with ubuntu and now my partition is full!. My question is ( and here is where I show my deep ignorance and shame): can I "expand" the ubuntu partition gaining space from the storage one? If not, how many Gb would you recommend for an Ubuntu partition? I'm using a lot of music/video/graphics production software.
View 9 Replies View Relatedi have a small home server that i would like to add some disks to it. ideally 4 sata2 disks.
i have been reading about SAS controller that can be installed on PCI-E connection on the motherboards.
but i am not sure how these actually work.
how i can use these? i have tried searching for it. but i get loads of selling material which does not really clarify much.
how these SAS connect to sata2 disks - do i need some adapter?
I decided a few days ago it was time to reinstall ubuntu since Lucid looked fun and interesting. Everything went really well (my table functions even worked with no configuration!) until I decided I wanted to resize my linux partition so I could install a win 7 virtual machine. I had some issues getting gparted to let me expand my partitions into free space, so I started diking around with various settings commands and I managed to screw up my partition table badly enough that I needed to boot with the live cd. After a few hours in panicked trouble shooting mode, I finally got grub reinstalled and managed to boot things regularly. But now Gparted is completely nonfunctional; it shows the entire HD as unallocated and says "can't have partition outside of disk". Apparently one of my partitions is oversized.
Here's my output of fdisk -lu and sfdisk -d:
sudo fdisk -lu
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x5c5ef856 .....
I clean installed Ubuntu 10.10 by shrinking my Windows 7 partition slightly. Now that I want to expand my Linux partition, I shrunk my Win 7 partition from Windows OS. From Ubuntu, the partition manager shows /dev/sda1 contains the Win 7 and unallocated partition. /dev/sda2 contains the Linux and swap partitions. I can't seem to expand my Linux partition (ext4) in sda2 with the unallocated space in sda1. I also can't shift the unallocated space in sda1 to sda2. Any idea how to expand my main Linux partition with the unallocated space?
View 4 Replies View RelatedI have Ubuntu 10.10 installed along side of Windows 7 on the same partition. I'm a bit of a noob as I have only recently got serious about using Ubuntu daily. I was wondering how I could go about expanding the space Ubuntu can use seeing as how I don't have it set up as a separate partition.
View 5 Replies View RelatedI am not sure where to post this so move please if its the wrong place. A few weeks ago i decided to try out Ubuntu, so I installed it as a dual boot, along with Windows 7. Now i have decided to switch fully to Ubuntu, so I have formatted the windows partition. Now however i am not sure how to allocated the unallocated space and expand the Ubuntu partition. Is even possible?
View 4 Replies View RelatedSo, I wan't completely paying attention to the default partitioning that Red Hat Enterprise 6 does.
I was setting up a base image for VMWare and the disk was 200GB, but for some reason the default is for about 40% to go to the root partition and then the rest of it to go to /home (this doesn't include the 2GB or so in swap).
Is there an easy way to recover the space under /home and expand the root partition? Assume there are no user accounts created.
I have been using Natty (11.04) for a while with a 3disk RAID5 via MDADM and all have been ok.I have just stuck in another disk using: mdadm /dev/md0 --add /dev/sdb, then mdadm --grow /dev/md --raid-devices=4I then resize2fs /dev/md0all seemed ok until i tried "tail -f /var/log/syslog" and was given:tail: cannot watch `/var/log/syslog': No space left on devicedf -h gives me loads of space freedf -i no problemsany i have an expensive lump parts just sitting here doing nothing.
View 9 Replies View Relatedran out of space in my /home dir. Have a second hard drive to install and would like to designate it as additional space for /home. I do not want to mount it as a dir inside my home I would like it to simply work as though my /home simply has more space available to it.
View 1 Replies View RelatedI'm about to do a clean wipe of my laptop, to try out Ubuntu. I've read quite a bit about dual-booting WIn7 and Ubuntu, but not alot about the process of installing. I'd like to install Win7 and Ubuntu on 2 small drives, and leave the rest for a Storage partition. But when should I partition that Storage Drive? Should I do it while I'm installing Win7? Or should I partition the amount of space to Storage after I've installed Ubuntu?
View 3 Replies View RelatedI'm building an Ubuntu 9.10 home server to essentially backup all my PCs to, serve media, and store other large data (I record music and film). Here's what I have as far as storage goes:
4GB CompactFlash: for OS
2x 500GB WD drives: intended for RAID-1 for backup (which I will in turn back to external drive on a weekly basis)
3x TB Hitachi drives: intended for RAID-5 for media and storage
Both RAIDs will be software-driven. Now, a few questions:
From what I've read, I can benefit from using LVM on top of the RAID. Is this true, and besides the complexity and potential difficulties in recovery in case of disaster, is there a downside to LVM?
Would I benefit at all from using smaller logical volumes on the RAID-5, or should I just make one at the full size of the drive?
Also from what I've read, it seems that XFS may be the best filesystem to use, from a stability and performance standpoint. Should I go that route, then? I suppose that if it IS beneficial to have multiple smaller logical volumes, then there may come a point that I need to shrink and grow these logical volumes, and if that's the case, it appears XFS is out of the question. What's the runner-up; Reiser? I currently have /swap and /home partitions on the CF card. I'd at the very least like to remove the /swap partition and just create a swap file on the RAID-5. Should I move my /home partition to the RAID-5 as well?
I have an Ubuntu 10.04 machine, and I would like it to host a folder over the Internet so if I am on another network (with a windows computer) I can log into it's folder and share and edit files among other users.
View 1 Replies View RelatedI have a Fedora NAS (not built by me) there is a 1 Tera of storage 2x 500 set at raid 0. The server runs Fedora 7/8 I believe which, runs flawlessly. Sadly, I am running out of storage space and would like to add more. Can I just put another drive in the box? If so, what do I need to do and what impact does it have on the existing raid 0 setup. Ideally I would like to put two additional in but I am not confident how to configure them. Is this just a case of mapping them in Windows 7.
View 2 Replies View RelatedI am running a dual boot system with Win7 on /dev/sda and Ubuntu 10.10 on /dev/sdb
I also have a 250 GB disk I use for storing backup data, /dev/sdc
The two logical partitions on /dev/sdc (/dev/sdc2 and /dev/sdc5) each take up 2.86 GB and I would like to free up that space if possible.
Since the filesystem on /dev/sdc doesn't have an OS on it, does it still require that those two logical partitions exist?
Cost effective (the people want cheap) solution to increase server storage space with as little impact on throughput (what I want) as possible. I have a server that sends instructions to 20 clients to perform certain tasks. The clients send gigs of data back to the server for storage.
BACKGROUND INFORMATION
Network: Gigabit Ethernet
Clients: (20) HP, Solaris, Linux
Linux Server: Dell R805 PowerEdge (QUAD Core Athlons 16 gigs of ram, 4 gigabit ports.
Selected directories are mounted (NFS) by clients. One directory to be mounted by the clients contains executable files. Mount commands are sent from the server (rsh) to the clients. Yes I know (ssh) but this is how the software was originally written so let's go with it.
The clients then receive commands to execute the binaries contained within the mounted directory. The binaries basically create an image of the clients filesystem including special applications. The client then sends the files and directories to the server which stores this �image�. This process can be reversed to restore a client to the initial baseline image.
In a nut shell, 20 clients are sending gigs of data to the server for storage. I need to attach a NAS (gigabit) to extend the storage capability of the server. The server would mount (NFS) to the hard drives on the NAS. The NAS, configured as a �direct attached storage� device (DAS), means the storage device is connected directly to the server and not the network (which makes it a DAS). This would provide direct storage expansion for the server. However, this configuration cannot be a bottleneck that significantly hinders performance.
Clients <---data---->Server<----storage---->DAS/NAS
1) Will a low end NAS (gigabit port) work? (NetGear 1TB ReadyNAS Duo, RND2110-100NAS) or something with a higher rated throughput (QNAP TS-239 Pro II)
2) Low end won't work, go with �?
3) Does the processor on the NAS play any role that would determine the performance of this configuration given that the server would mount directly to a directory on this device (DAS/NAS)?
using onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?
View 4 Replies View RelatedI'm interested in buying a new hardware for my company. The old server (now 10 years old) should be replaced with a new one. Till now, I was looking on different hardware suppliers, boards and different other places. I found a Tyan board [URL]. The hardware spec is quite interesting and the board would fullfill our claims.
how both storage devices will be supported by Ubuntu or Debian??
- SATA-Controller: AMD SP5100
- SAS-Controller: LSI 1068E
Logical Memory Space of 4GB is divided in to 3GB User Space and 1GB Kernel Space. Always. Correct?
1. How can we change it? (just changing value of PAGE_OFFSET is okay?)
2. If system have only 256MB of memory (embedded system) and suppose Kernel Modules eat away all the memory during boot. User space will be left will no memory. Is this case possible?
I am trying to do the cluster storage with the Rock Cluster storage operating system . I have install the rock cluster on the main server . and I want to connect the client with the PXE boot . when I starting the client then it boot from the PXE boot into the mode of compute node. but it ask the where is to be stored the I have give the path..then server says that not able to find the directory path.
Steps:-
1) insert-ethers
2) client is started with the PXE boot.
3) it detects the dhcp .
4) At last it demand where is to be started by cd-rom, harddisk ,nfs etc.
then I started with the nfs and I have given the lanIp of server.and server is detecting the client but client is not finding the filesystem directory. into export partition directory but it is not taking path.
PATH:-
/export/rock/install it is not finding this path then it is not able to start the o/s from PXE boot..Is there any solution and manual of rock or anyother solution then u can reply to me...
Is it possible to use a pen drive to expand the amount of ram you have? In Lucid 10.04 LTS.
View 1 Replies View RelatedI want resize my partitions, i need more space for ubuntu, i already have 58gbs of free space, but i dont know how i can expand my partitions, i have tried "GParted Partition Tool", but it won't allow me to do it. The only other thing i can think of is re-installing ubuntu, and if i have to reinstall it how can i retain my settings and programs that i have installed?
View 6 Replies View RelatedI've got a 500gb hard drive.
-sda1 is 400gb (ubuntu 9.10/32bit/ext3)
-sda2 is 50gb (ubuntu 10.04/64bit/ext4)
I would like to expand my lucid partition now and eventually get rid of my 9.10 partition. I've got an 80GB virtualbox file sitting on sda1 that I need and want to expand sda2 now so I can first copy the VB file over, then expand sda2 completely. I just finished creating sda3 ext4, but cant figure out how to merge it with sda2 (well really sda6). Please see image. [URL]
I need to expand my ntfs and have ample GB, all taken up presently so if I create some unallocated GB's under ntfs how do I expand the ntfs partition. I have gparted live CD.
View 1 Replies View RelatedI have decided that Windows 7 is something that belongs MAYBE in a virtual machine and that I have no use for it. Therefore, I want to recover the 130 gigs it takes on my hard drive and add that to my Ubuntu partition.
Here is the output of fdisk -lu:
Code:
I want to edit my volume meter so that way i can change my volume but be more precise about it. I mean if i slightly slide my finger a little bit it goes from to mute to all the way up. (I have a touchpad buttons)
View 2 Replies View RelatedWhen I use disk utility to expand my RAID array it creates a partition on my 1.5TB drive which it would like to add to the RAID 5.
However, none of the drive existing on the RAID are partitioned so what I think has happened is the partition itself has created a difference of about 2 million bytes smaller than the others and thus unable to add the component.
How can I specify the exact bytes for my hard drive partition so that I can add this to the array?
I have been using ubuntu for about a year now. Since then one main thing have evaded me: how to increase the size of /home without reinstalling the OS. I tried to change the size from the default 200mb once while installing and it ended up messing up my hard drive, so I decided not to do it this time around because I have important stuffs on it.
View 9 Replies View RelatedI have just gotten back into Ubuntu and installed 11.04. However I happen to see alot of issues with this. Trying to run compiz and all bejesus is breaking loose on me here. The biggest frustrating one is this new desktop, after searching I found how to go back to old school way I use to use it.So, now I get into this desktop, start compiz after the other desktop totally barfed on me, this one is doing the same as well.I lost all of my little boxs at top to close minimize and expand the windows.
Seriously, they took something and turned it into this just so ppl quit complaining about moving from windows to this. I for one dont like it and it doesnt work right with nothing,(Sounds like windows ughh) very hard to navigate, where you think one thing is suppose to be and they totally moved it, took me half of yesterday to get my wifi working but only after I went back to old desktop, video wasnt working properly, only after I went back to old desktop.
i don't know what i did but the minimize exit and expand buttons that are usually on the top left or right of windows just dissapeared, it's getting really irritating =/ Anyway to restore them?
View 2 Replies View Related
