I can enter my password just fine to log into the system, and using sudo from a terminal also works, but "gksu" does not. It tells me my password is incorrect. That means Synaptic doesn't work unless I "sudo synaptic" from the terminal. Anyone else happen to encounter this yet, or is it just me? I started with a clean install of Kubuntu 10.10, which I later installed ubuntu-desktop over and then removed. Would that possibly make a difference here?
I am running a file server on Jaunty. It was a fresh install about a month ago and I have been having problems ever since. I connect external drives to the machine to do nightly backups. Lately, I have been using GParted (Gnome Partition Editor) to format the drives before using them as backups, as I keep a backup for every day of the week.
After using GParted a couple of times, it will stop working and I can't open it or any other application that needs root privileges. I can't use Gnome to mount drives anymore. I have to open Terminal and use the mount command to mount drives. Trying to start gparted or any other application, including nautilus from the Terminal using gksudo or gksu, I get the following error message:
Code: gksudo nautilus (nautilus:25353): nautilus-extension-gnome-mount-WARNING **: Cannot connect to system bus: org.freedesktop.DBus.Error.LimitsExceeded : The maximum number of active connections for UID 0 has been reached (nautilus:25353): nautilus-extension-gnome-mount-WARNING **: Could not initialize hal context
[Code].....
Once the machine is rebooted, everything works fine until I run a few more privileged applications, then the applications stop working again and this whole process starts all over. The only way to fix the problem so far is to reboot the machine, which is completely unacceptable.
I'd like to be able to run gksu (i.e. the default windowed authentication) without a password. I tried to find this on the wiki and here on the forums but wasn't able to find anything. I've allowed 'sudo' to run without a password:
Code: <username> ALL=NOPASSWD: ALL
for my username but this has no effect on 'gksu'. As I am the only user on my machine and I have to enter a password on login
gksudo nautilus on the terminal, and i receive this message,
(nautilus:2252): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
I have this issue on both Ubuntu and Lubuntu 11.04 64-bit on 2 different machines. I have not tested 32-bit.
When I run synaptic or update-manager it presents me with gksu, not gksudo as it previously did in previous Ubuntu releases, no matter how many times I try it will not accept my password.
I have even given it command line arguments to print the password to the terminal and it's correct.
I have found a workaround - by running gksu-properties and changing the mode from su to sudo it will now display gksudo and accept my password.
However, I want to know why it won't accept my sudo password for the su and gksu commands? There are no error messages which are outputted, the gui just says incorrect password.
How to fix the problem that is happening with gksu. It prompts me for the administrative password. I don't (for advised security reasons) have a password associated with the root account.
The sudo works fine and accepts my sudo password. Gksu fails with "incorect password... try again." error.
This is a new install of the Ubuntu Server 10.10 x64 Maverick edition.
This comes at some point after installing GNS3 and Dynamips, which require administrator access as GUI's. Although, the first couple times I tried to run GNS3 as administrator, it worked fine. I do still receive the password prompt, whether running from the command line or the context menu. Note that GNS3 is the first application for which I've needed to run gksudo, so this may have been an issue before the above were installed, although I've always been able to run "Open as Administrator" in Nautilus and "Synaptic Package Manager," which now will not run either.
Added an icon for Xampp via Alacarte(Main Menu) and need something like gksu to make it work. In the past i installed Beesu but in F15 it causes problems during boot and shutdown. Is there any convenient way to install gksu or any other solution to get the graphical starter working?
gksu doesn't come with Fedora 14, but since i'm running on the latest VirtualBox, i need gksu to install the guest additions. anyone know how to install latest gksu or how to workaround this dependency?
I'm using sbopkg-0.35.0 in Slack 13.37, and Ponce's SBo-git current repository (but have the identical problem with the official SBo 1337 repository). I have installed GConf & ORBit2 from /extra & have installed the other dependencies (gnome-keyring, & libgtop) via Ponce's repository. When compiling libgksu, it errors as follows:
I have 13.0_64 installed. Found gksu on slackbuild.org. I downloaded it and followed the links to the dependencies and built and installed each one mentioned. gksu built okay and gave me a package which I installed. If I open the run command and enter "gksu thunar" I get this error
Code: The gksu-run-helper command was not found or is not executable. I'm lost at this point. Forgot to mention that I am running Xfce.
I am using open suse 11.3 (gnome). Have installed gnome commander and it is asking for gksu to be installed to enable root file function. Have searched Webpin and can only find the 11.2 package which will not install in 11.3.
using ubuntu 8.04..off late whenevr i try 2 open some applications frm ystem>administration like login window,synaptic,software sources,hardware testing tey all crash..all tese probably use gksu
Just like the title says, if I were to try to run anything through gksu and accidentally put in an incorrect password, instead of the gksu window coming up again, it would just terminate.
I'm configuring some security and i'd like to run arpon to a specific device everytime wicd connects.So, if Wicd connects to a wireless, i'd launch gksu arpon -d -i eth2 (for example.) But this doesn't work, because it seems that gksu only works for X apps.I found that if i do: gnome-terminal -e 'sudo arpon -d -i eth2' It works, but it leaves me with a terminal window open, and i'd like to be asked for a password gksu style.I've also tried this: gksu -- arpon -d -i eth2which also works, but the program quits right after it's started.Am i missing something here?
Does Fedora 11 gnome have that gksu graphical authentication program which allows a normal user to open tools such as that NTFS Configuration Tool to enable full ntfs write support ? I did try to find it with both yum in a terminal, and the package manager, but is not found.
** (nautilus:2347): WARNING **: No marshaller for signature of signal 'UploadFinished' ** (nautilus:2347): WARNING **: No marshaller for signature of signal 'DownloadFinished' ** (nautilus:2347): WARNING **: No marshaller for signature of signal 'ShareCreateError'
The "root - File Browser" comes up and it all seems to work but "what's up with the 3 warnings"?
I installed lubuntu 10.10 from a minimal netinstall. For some reason, the main menu entry for synaptic package manager uses gksu instead of gksudo at the beginning of the command, as revealed by right-clicking the entry, then clicking "properties". This, of course, precludes the ability to access the program unless you're among the few who have activated the root user account. That's a problem in and of itself, but it's been recognized elsewhere. However, after I fixed the command and clicked "ok", nothing changed. I opened up the little properties menu again and it was gksu, as though I hadn't fixed the command.
The properties window is a mysterious little program called lxshortcut. I suspect that if I run lxshortcut using sudo, then the changes I make will actually stick. Problem is, I don't know how to find the actual location of the main menu's SPM shortcut/launcher-thingy. Nor are there any clear instructions on how to use lxshortcut in terminal. I flailed about with my best interpretation of vague instructions, but to no avail.
I downloaded alacarte (which is, of course, intended for gnome), and I got the software sources entry to show up in the list, but nothing else in the program responded when I clicked. The whole experience in alacarte was weird and unhelpful and somehow I've outright removed the menu entry for synaptic. And that's fine, I barely use it anyway, but Software Sources also has the same gksu problem, and I actually use that one. So how do I change the command associated with one of the preferences in the lxde/lubuntu main menu?
Like in the kde desktop there is; "kdesu" for temporary root, such as to open a text to edit. So then does the gnome desktop use "gksu" for it's temporary root ? I now refer to a Fedora 11 install. And how can I change a utility tool to open up as a regular user, (not just only as root) ?
Anyone what this gksu error is about (it repeats it three times)
gksu-2.0.0-1.el5.rf.x86_64.rpm # gksu ls
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
"failed to run * as user root, the gksu-run-helper program is not found or is not executable"
Tried googling and checking threads at LQ didnt find a solution or another instance running slackware64 current.. everything built fine, tried and everythings executable...I also have Alien's multilib installed, with only firefox and flashplugin as 32bit, everything else 64bit. I can't open any apps as root by normal user
I think this started just lately.gksu refuses to authenticate me; it just tells me my password is incorrect.sudo and gksudo both work fine. This is no problem if what I want is in the menu, because I can just change gksu to gksudo, but some functions, like the Check button in Update Manager,
When i open applications which need su or gksu commands sometimes a string "Granting rights" appears in the window. I just find this [URL] It happens mostly when i use desktop launchers to run these applications.
Netbeans 6.8 Ubuntu 10.04: I add php to netbeans and when I type $ gksu netbeans its open netbeans without php editor. Only when I type $ sudo netbeans its open it properly
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
I have been looking around the forums searching for similar problems, it seems not only me had this problem. About a month ago I did a regular update via Upd Manager. The next day - no wired connection.Still managable, since the local library has wireless. Now that won't work either.Just after I upgraded from Jaunty, I accidentally removed NetwMngr from the top right corner of the screen, but that should not have anything to do with how the program works, right? I now cannot reach NM, if I run it from the terminal, nothing happens visibly.
I installed it on a Dell Inspiron 531 with the GeForce 6150SE nForce 430 built in video card. From the recommend driver list I installed �NVIDIA accelerated graphics driver (version current) [Recommended
Well, turns out it should not have been recommended. I had restarted and all I got was a low res ubuntu logo and a boot right into a full screen terminal. Tried startx and got a no screens found, I look online for about an hour last night and decided to just reinstall, which takes a couple hours when installing all the packages.
I have done more research today and found to install the latest linux x64 driver from nVidias website, which I did, but it does not run. I followed some more instructions and it said to do a �sudo chmod +x <file>� which I did, and it starts to open and I get �You appear to be running an X server; please exit X before installing.�
I�m starting to get a little frustrated here, guess I�m just used to a lot of the ease of windows and assumed that something like installing a graphics card driver would be easy.
