I'm using sbopkg-0.35.0 in Slack 13.37, and Ponce's SBo-git current repository (but have the identical problem with the official SBo 1337 repository). I have installed GConf & ORBit2 from /extra & have installed the other dependencies (gnome-keyring, & libgtop) via Ponce's repository. When compiling libgksu, it errors as follows:
[Code]...
I have 13.0_64 installed. Found gksu on slackbuild.org. I downloaded it and followed the links to the dependencies and built and installed each one mentioned. gksu built okay and gave me a package which I installed. If I open the run command and enter "gksu thunar" I get this error
Code:
The gksu-run-helper command was not found or is not executable. I'm lost at this point. Forgot to mention that I am running Xfce.
error message
Quote:
"failed to run * as user root, the gksu-run-helper program is not found or is not executable"
Tried googling and checking threads at LQ didnt find a solution or another instance running slackware64 current.. everything built fine, tried and everythings executable...I also have Alien's multilib installed, with only firefox and flashplugin as 32bit, everything else 64bit. I can't open any apps as root by normal user
it's possible to compile the 2.6.37 kernel patched with the autogroup patch on a Slackware 13.1 system running 2.6.33.4-smp with 2.6.33.4 headers? I just compiled and installed the 2.6.37-autogroup kernel from AUR on my ARCH setup and I like it especially when using firefox with lots of tabs open and other background apps also running. I did notice a speed and smothness difference in my ARCH testing setup with this kernel patch and I can get same results in 13.1??
View 1 Replies View RelatedI am in trouble compiling libvirt (latest version 0.8.3) to use with KVM in Slackware64-13.1.
Here's the output of make:
Code:
Config.log is attached.
I've downloaded and tried to install the newest ATI driver, but I get this error when I try to build packages:
Code:
./packages/Slackware/ati-packager.sh: line 56: unexpected EOF while looking for matching `]'
./packages/Slackware/ati-packager.sh: line 406: syntax error: unexpected end of file
I extracted the package and am pretty sure I found the source of the error (a missing ]) but I'm unsure of how to repackage the installer after correcting it. I did a google search and at least one other person has had this error: [URL]...
Installed Slack-13.1 x86_64. Downloaded OOo_3.2.1_Linux_x86-64_install-rpm-wJRE_en-US.tar.gz and SlackBuild.
Started with:
Quote:
And ended with:
Code:
I'm looking for a good IDE for C/C++, that runs well in slackware. I used CodeBlocks, but I can't compile in the current, and its getting a little old. I see a lot of threads talking about anjunta and kdedeveloper, but I don't like these.
View 14 Replies View RelatedHow do you compile a tar.gz source on slackware?I am asking because I am about to download and install Slackware(x64), and I have some drivers that it may not have (Ubuntu didn't have them) and TrueCrypt source.
View 9 Replies View RelatedIs this package supposed to compile on slakware64 13.1 ( I have also multilib) ?
I m trying to but I m encountering this problem:
Code:
I tried to compile Gyachi on Slackware 13.1, but I failed.
The main problem is the lib gtkhtml. The current build file is expecting the version 2, but I found only the package for version 3.
An updated slackbuild for Gyachi on Slackware 13.1 could be the perfect solution (I guess).
People, there is a tutorial to upgrade the kernel 2.6.38.3(compiling tutorial included =D) to Slackware 13.1??And, this upgrade generate a better performance on system??
View 14 Replies View RelatedMy system is slackware64 13 and I am having problems during compilation of libdnet library. How to compile this program? I compile like this:
Code:
configure --with-python && make
I know this is not slackware related but I want to give it a try...
trying to compile heartbeat on slack64, anybody has checked this? and/or solved?
View 8 Replies View RelatedMy first time to try Networkmanager and I get this error
[code]...
Is there a dependency I missed?
I installed Slackware64 13.1 two days ago for the first time ever on my Dell Inspiron 1525 after using linux for about a year (Debian and Fedora, though I've installed a few others in VMs). I've really enjoyed Slackware so far, it's been comparatively trouble free. However, I decided to follow AlienBOB's instructions to make it multilib, and though I thought I'd done everything right - I can't seem to compile any 32-bit 13.1 slackbuilds; I've tried with sbopkg as well as the normal method, but it simply won't work. I must have done something wrong, but I've re-read the instructions on getting mutilib working several times and I can't work out what it is.
View 14 Replies View RelatedThe background to the problem. I was dangerous, not deadly or elite and I want to be that way again. The best representation that I have found is oolite. Now this installs by auto-package but only in 32-bit and I find auto-package a bit of a pain. I have the windows version installed and running under wine but would prefer a compiled 64-bit Slackware package.
Oolite requires gnu-step so I have downloaded the source and some old (12.2) slackbuilds, which I have modified, and made a package for gnustep-make. The next stage is to make a package for gnustep-base however it is failing with the following error
Code:
./configure: line 1390: gnustep-config: command not found
configure: error: cannot run /bin/sh /tmp/SBo/gnustep-base-1.18.0/config.sub
On the latest slackware (or any i've tried) I've tried removing the --disable-sldap etc from the slackbuild and rebuilding the package to get the server binary. However it never builds, and browsing the tgz package shows it as empty.
View 3 Replies View RelatedI'm trying to compile agave.
I had installed gconfmm using src2pkg.
Code:
Now, when trying to compile agave:
Code:
It did not spit out any errors:
Code:
Agave configuration:
Agave will be compiled with the following features:
The following options will be passed to the compiler:
AGAVE_CFLAGS:
AGAVE_LIBS: -
Make, however, doesn't successfully finish:
Code:
I tried to find gconfmm.h. It seems it's not present on my system.
I built kerberos, and added --with-krb5 to the postgresql build. It failed with this error : configure: error: could not find function 'krb5_sendauth' required for Kerberos 5
View 5 Replies View RelatedI'm trying to compile tolua++ so that i can use lua in conky 1.7.2, however I am running into a problem. tolua++ defaults to looking for lua 5.0 libraries and I have lua 5.1 installed since that is what conky requires. According to the README tolua++ can use lua-5.1 but I not sure how to configure tulua++ to use those libraries since it uses scons. Here is a what the README says...
Compiling for lua 5.1
Starting from version 1.0.8pre1, tolua++ can be compiled with both lua 5.0 and
5.1. Both versions will output the same code, and the C API (tolua++.h) is the
same.
The build system is not yet ready to detect/decide when to compile for 5.1,
the easiest way right now is to add a file called 'custom.py' on the root of
the package, with the following:
## BEGIN custom.py
CCFLAGS = ['-I/usr/local/include/lua5.1', '-O2', '-ansi']
LIBPATH = ['/usr/local/lib']
LIBS = ['lua5.1', 'dl', 'm']
tolua_bin = 'tolua++5.1'
[Code]....
I just used sbopkg to download and compile Digikam 1.0.0 from slackbuilds.org. But compilation stops with an error regarding "png loader". I guess this has to do with the libpng issue mentioned in the changelog.
Nevertheless: Has anyone been able to compile Digikam on the latest Slackware64-current?
I'm using the slackware64 current slackbuild to build a new firefox for -current 32 (I like dynamically linked cairo for fonts). But I am getting a compile error...
c++ -o host_dump_symbols.o -c -O -I./../.. -I. -I. -I../../../../../../dist/include -I../../../../../../dist/include/breakpad_linux_common -I/tmp/mozilla-1.9.1/dist/include/nspr -I/tmp/mozilla-1.9.1/dist/sdk/include -I/tmp/mozilla-1.9.1/dist/include/nspr dump_symbols.cc
[Code]....
config file for kernel compilation that will only contain the drivers for the current hardware that are needed for the running kernel?
i.e. I am not 100% sure which drivers I need to compile into the kernel but do not want to compile all of them for my laptop??
Running slackware-current
The krusader slackbuild crashes on my machine with the following error, see attached.
I've been trying to compile and install different terminal emulators:Eterm, aterm, and libAfterImage for urxvt.
I've been getting all these errors, and it seems odd to me. I did some fiddling awhile back enabling KMS with my radeon, install custom packages for xf86-ati, mesa, and libdrm. Could that or some other fiddling have broken these dependencies?
Here is an excerpt, with the full error log attached and here:url
Code:
In file included from libungif/../xwrap.h:5,
from libungif/../asim_afterbase.h:23,
from libungif/../afterbase.h:36,
from libungif/gif_hash.h:24,
from libungif/gif_lib_private.h:5,
code....
I do not even know where to begin, and what logs / errors show: I am completely confused in the variables, etc.I can not install PAL Like all successful, and the program to compile, but I can not verify this.I tried premake and one Engine ODE - then I get an error segmentation, when you start paldemo.If I use cmake, then get this:
Code:
...
[ 46%] Built target libpal
[code]....
I have installed multilib by [url]. And 32-bit programs can run.
When I compile packages,something error.
Quote:
Quote:
I have tried what [url] say and not work too.
running current with 2.6.33.1-smp kernel i cant seem to get the slib slackbuild to run. it just quits without ever building the tgz. i hope i can attach the terminal output of the compile.
View 8 Replies View Relateddo this slackbuild require the JDK package?
I've got a compile error which says that 'javac' is missing.. this file seems to be only in the JDK package (and not in the JRE).
Do it's correct? No problem to install the JDK ..