I have been here awhile, but have not posted much, and am a bit new to things again...I just burned a 10.04 Ubuntu Desktop Edition disc from the main Ubuntu page. However, when I load up the disc (boot from it), I get a login screen instead of a desktop or window asking for input.What am I doing wrong? I know on the older Live! discs you'd typically get a desktop or installation window.
View 2 Repliesdon't have the knowledge to know what to do next.I'm trying to run the live disc of 11.04 as I want to dual boot with it. I've checked the MD5 and checked the disc for faults and they're ok but I just end up with a black screen. The graphics card is ATI 4550.
View 2 Replies View Relatedi have just tried ubuntu 9.10 runing the "try ubuntu without changing" mode and the screen resolution was totaly off, it was 800 x 600 and there was only one other optinion wich was even worse , my screen res on windows is 1366 x 798.... Is this a problem that would rectify itself if i installed ubuntu properly or is there something i need to do?
View 9 Replies View RelatedI can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI am trying to install fedora 12 on my computer. I have burned the live cd ISO and it works just fine until right before it shows the login screen. I suspect that it may have to do with my ati radeon 9800 graphics card. give me some boot options or some such thing so that I could install fedora on my computer. Also some other specs
ASUS A7N8X Mother Board
AMD Athalon XP
1GB ram
I just downloaded Debian's live CD .iso file. I put it on a USB stick and booted from it. It loads everything then presents me a login screen. I have no idea what the login and password is I've looked all over google and people said it was user: live pass: live or something like that. I've tried a lot of different combinations with no luck. So does anyone know the real username and password for this?
View 14 Replies View RelatedI have downloaded the Ubuntu 10.04 LTS iso from the Ubuntu website and created a Live USB disc with it.
I test this USB disc by booting from it on my desktop machine. It works fine. It even reinstalls Ubuntu on a test partition successfully.
I then attempt to use this Live USB disc to boot up my netbook. I receive the initial boot menu, and I can choose to either 'try with no changes' or 'install'. Either way, Ubuntu fails to boot, and hangs on the purple pre-desktop Ubuntu splash-screen for over half an hour with no change.
So I try re-creating the Live USB disc with both the Universal USB Installer and Unetbootin. The Live USB disc still fails to boot my netbook with exactly the same result. If I press the ESC key on the netbook whilst the screen has hung at this stage, I see the message code...
I'm trying to boot into the Live CD on my Ubuntu installation disc. I changed the BIOS to boot from my disc drive, and I can hear it read the disc, but then my computer just boots into the Ubuntu installed on my hard drive. How can I boot the Live CD?
View 9 Replies View RelatedThe problem is as follows: I recently had a power outage whilst my computer was running windows. When I tried to restart the computer I received UNMOUNTABLE_BOOT on the classic blue screen of disobedience. To resolve this I've booted a live ubuntu disc (10.04 LTS), of course when I created an ext4 partition and then tried to install linux I received "error while copying files" around the 65% point of the install which has ultimately told me to create another cd, which since without a working OS I can't do.
With the above filaure in mind I looking into fsck, fsck.ntfs and testdisk both fsck couldn't access the partition and fsck.ntfs suggested I run chkdsk (which I thought fsck was the linux equivalent of).So I figure the next logical step is to try and install linux from the terminal of the cd-based instance of linux I'm running just now from a freshly downloaded iso.
AVG Rescue CD A powerful toolset for rescue & repair of infected machines. Quote: The AVG Rescue CD is a powerful must-have toolkit for the rescue and repair of infected machines. It provides essential utilities for system administrators and other IT professionals and includes the following features:
* Comprehensive administration toolkit
* System recovery from virus and spyware infections
* Suitable for recovering MS Windows and Linux operating systemsFAT32
and NTFS file systems)
* Ability to perform a clean boot from CD or USB stick
* Free support and service for paid license holders of any AVG product
* FAQ and Free Forum self-help support for AVG Free users
If I use Ubuntu's (10.4) Startup Disc Creator app to create Debian (Lenny) start up USB I just get (when using it on a separate machine) a black screen with the text "boot:" If I press Enter I get a pale blue screen but nothing else, some text if I press the TAB key, but it will do nothing. Is this because I use Ubuntu for a Debian OS or is there some other problem? I've noticed that the disc creator in Ubuntu only really likes Ubuntu related OSs. But since it recognised it when I created it I would have thought it'd work!
View 3 Replies View RelatedUsing Ubuntu Server 10.04, I was adding a new file system to mount today. I made a mistake editing the fstab folder for mounting a new partition, and now I can no longer boot. I attempted to use a live disc to edit correctly, and did so, however I still get errors on boot. I have included a screenshot of what I get on screen while trying to boot.
View 1 Replies View RelatedI'm doing a full actual install, but every time I try it boots into live mode instead.
I've checked the disc and it says everything is kosher. I'm not sure what's going on.
I have an Eee PC with a dead Hdd. I brought it back to life by installing Ubuntu 10.10 on a 16GB SD card. It works 100% but is sluggish.Now I am wondering, from the standpoint of reducing SD card access and writes, would it have been better to create a Live Disc on the SD card with persistence options? What I am thinking is that a Live Disc is designed to run out of RAM, and would thus reduce the activity on the SD card. The only thing this netbook will get used for is the internet. It is a netbook, so the performance is limited, but as far as netbooks go, it is top of the line with dual core and discrete nvidia graphics.
View 1 Replies View RelatedMy last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
My wife's XP has crashed and I need to save files. I've discovered the command to mount the hard drive - unfortunately I need to force the mount, but I can't do it because I have to be in root. I can see the root user in the user list, but when I try to switch I can't access it. How I can do it to back up my wife's files. I have Kubuntu 8 and KDE 4.1.
View 2 Replies View RelatedI can't seem to find this anywhere. I have burned Debian 5.06 for i386 and trying to login when running the live cd. What is the username and password to get in?
edit....
I found 'user' and 'live' but they don't work.
I want to make a DVD with Ubuntu, Kubuntu, and Xubuntu so i can choose one to start a live session when booting from the disc. I'd like to introduce linux to friends and having a few variations might make it easier to transition.
View 3 Replies View RelatedThe problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
View 5 Replies View RelatedI have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
/etc/fstab:
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part5 swap swap defaults 0 0
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part6 / ext4 acl,user_xattr 1 1
[code]....
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100%
devtmpfs Use% is 1%
tmpfs Use% is 1%
/dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
I have a desktop running Hardy and till friday it was running good. Today is monday and I guess it has got monday blues like I get every monday at work.Today I tried to start it as usual but it just refused to go further than login screen. I just can not login. It just hangs it there. I do not know what has gone wrong. I did not change anything since friday and no one else uses it. Theres nothing in logs that could give any idea. It just hangs without any reason and is still on the login screen for ever. It does ask my username and password but then it does not go further.But to my surprise I tried logging in with root and it gave me expected error that system administrator is not allowed to login from gnome.
View 5 Replies View Relatedthis blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
View 1 Replies View RelatedI had Ubuntu installed on my old laptop in dualboot with windows. This year i bought a new Sony Vaio VPCS12M9E preinstalled with windows 7 pro, but i liked the idea of having the opportunity of chosing between windows and ubuntu, so i downloaded ubuntu 10.10 and burned the ISO-image to a disc, and restarted my laptop just as i did when i installed it on my old laptop. The problem is that when i boot the disc after restarting the computer, the screen just turns black. What can i do to install Ubuntu?
View 1 Replies View RelatedI'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
I am new to Linux but wanted to try it. I downloaded Ubuntu and burned the ISO to disc, I restarted my PC and the disc runs and seems to be loading, a purple screen appears with a small icon at the bottom, then the screen turns black and that is all, disc stops running and nothing else, am i doing something wrong here?
View 2 Replies View RelatedI have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
I have used Ubuntu since 7-4; I now have 10.4. However, in the last week I have been taken to the login screen three times. This could be potentially calamitous. Ctrl+Alt +Backspace have by default been disable since 9-4. There is no way I am pressing atl+Prtscr +K. I wonder if there is a new zap command in 10.4, and if so, how to disable it. I have never found the need to go back back to the login window. I am generally using the command line when doing this.
View 1 Replies View RelatedI recently powered up my netbook... Selected my user log in, entered my password, and after a couple seconds I briefly see what looks to be the console and am returned to the login splash screen... I can Ctrl+Alt+F2 to get to the console and log in... but that is as far as I can get. This is the case for Gnome, Remix, and Remix 2D.
I can sudo apt-get (update, upgrade, etc) as well. It is the right password because if I type in a wrong one it presents an authentication failure dialog box.
How can I fix my log in screen and get to my desktop? I am Currently running 10.04.... waiting to get 10.10
yesterday i installed slim login manager on my computer (eee pc 1018p, ubuntu 11.04), and now it cannot get passed the ubuntu loading screen (with orange dots underneath) when booting. i tried booting into recovery mode and that didn't work either. i also left the computer trying to boot overnight and that didn't work.
basically, during this loading screen that should eventually bring you to the login screen, i can alt+tab to see the progress of the load. the progress is stuck on
Is there anything I can do from grub to remove slim?or, is there any way I can access my ubuntu partition and save all my files?