I just recently discovered flubox, it's a window manager right"? like gnome? or is it like compiz fusion? if so, it is better than compiz fusion? can i use it in conjunction with compiz fusion?
View 1 Repliesi found this http://crunchbanglinux.org/forums/to...indow-manager/ it has screenshots of exactly what i'm looking for, but i cant actually get it to work when following their instructions. i create the fusion.desktop file and the start-fusion.sh file, but they do not show up in xwmconfig or KDM. is there something in particular for slackware that i have to do to add the .desktop entry to my list of sessions?
View 4 Replies View Relatedi installed compiz fusion and avant window navigator but i am not able to run them.when i try to run awn this message is shown " Screen isn't composited. Please run compiz (-fusion) or another compositing manager".again iam not able to bring in various effects with compiz fusion.what should i do?
View 12 Replies View RelatedI'm hoping that this is a stupid question with a very simple answer that I just can't find.I've been playing around with compiz-fusion on -current64. When I have two windows open, if I close the top, active window, I would expect that the next window in the stack would receive the focus. However, it does not. I have to alt-tab to it or click it with the mouse.
View 3 Replies View Relatedcompiz fusion wont work.I try to enable desktop effects but it says it can't do it.Window manager warning: Attempt to perform window operation 26 on window none when operation 26 on none already in effect then went to quite a primative theme.normally the last two lines don't appear.My desktop has been weird lately, and not quite working well.Is there a way to like, roll back changes?it was working perfect last week... if i could roll back about a week it would be exellent..does anybody know what is wrong??
View 3 Replies View RelatedI spent *#@$ hours trying to figure out how to change my default window manager to "compiz-manger".I tried using gconf-editor and .gnomercAnybody has an idea how to do this?
View 8 Replies View RelatedI recently upgraded the motherboard/processor on my computer (as in quadrupled the processor and octupled the ram). The new board has a built in GPU (intel) and from searching the forums, I think this is part of the problem. Every time I boot up the computer, I need to open the Compiz icon and use it to reload the window manager before I see any title bars, borders, etc. 've tried the .bashrc hack (metacity --replace), but that doesn't do anything. In fact, whenever I open the terminal, I need to have two tabs open in order to use it, and when I close it all the borders go away again (even when I haven't done anything). Also, the onboard sound card (intel) doesn't work, but that's another task (I at least have a compatible card for that).
View 9 Replies View RelatedI'm trying to make Compiz activate at bootup, but I can't seem to get it to work. Basically, I'd like to make Compiz the default Window Manager in Kubuntu Lucid. How to accomplish this?
View 1 Replies View RelatedI finally waded through all the graphical issues that have been reported when upgrading 10.10 to 11.04. I've managed to get the nvidia drivers installed and working (even though Jockey still reports that nvidia-current is installed but has not been activated).Whenever I log into an Ubuntu Classic session, GNOME defaults to using metacity as the window manager. In order to get my compiz effects working, I have to open a terminal and do "compiz --replace". After that, everything appears to work normally including on screen notifications, the cube, etc.
I've though of including a "compiz --replace" script in Startup Applications as a possible workaround, but is there a better way to handle not having compiz started by default? Is there something in gconf-editor or similar that I can edit in order to make GNOME default to using compiz?
I'm thinking about switching from Ubuntu 11.04 classic to Xubuntu 11.04. My main priority is to have compiz running.
However, though I know how to get it running, I want to be able to use it without using the
Code:
Code every startup.
I know how to make it default in GNOME, however not in XFCE.
I use compiz but when I boot I need to reset the windowanager for it to function correctly :'(. It is not the end of the world, but it is annoying
View 14 Replies View RelatedAfter installing opensuse 11.4 (64bit- gnome 2), enabling compiz effects makes windows' decorations disappear.
I can solve this by doing
gtk-window-manager --replace
but I have to do this every log in.
I run the final version of Lucid Lynx and have a 9800gt.
I followed the following procedure to install compiz (and I want compiz, not just the built in desktop effects) on my computer, all sudo with KDM disabled where necessary:
1. apt-get install nvidia-current
2. nvidia-xconfig
3. apt-get install build-essential libxcomposite-dev libpng12-dev libsm-dev libxrandr-dev libxdamage-dev libxinerama-dev libstartup-notification0-dev libgconf2-dev libgl1-mesa-dev libglu1-mesa-dev libmetacity-dev librsvg2-dev libdbus-1-dev libdbus-glib-1-dev libgnome-desktop-dev libgnome-window-settings-dev gitweb curl autoconf automake automake1.9 libtool intltool libxslt1-dev xsltproc libwnck-dev python-dev python-pyrex <- these were prerequisites mentioned by the guide on compiz.org
4. apt-get install compiz compizconfig-settings-manager compiz-kde compiz-fusion-plugins-main compiz-fusion-plugins-extra emerald
At this point, everything installed successfully, and nvidia driver was working perfectly.
I verified this: desktop effects worked OOB.
5. compiz --replace &
6. emerald --replace &
At this point, compiz apparently started. Emerald worked perfectly: all of the window decorations worked OOB. I went and ran ccsm, and turned on quite a few settings. It didn't enable ANYTHING. When I reran ccsm, all of the settings were back to default, and enabling any new ones had no effect on window behavior. Strange. I looked on the web and found:[url]
The ubuntu page said that I should not "Enable integration into the desktop environment" if gconf was selected. BUT THE FLAT FILE CONFIGURATION WAS SELECTED BY DEFAULT. Then I went back to the site and it said flat file configuration was recommended!
Maybe I shouldn't have enabled desktop effects first (NOTE THAT I LATER DISABLED IT and things still did not work)?
So. I Installed Ubuntu 9.10 PPC from the LiveCD on my Mac G5. There is 4GB of ram in it. 2 CPU's and A Nvidia FX5200.
Now i want to install compiz fusion. I knew that Nvidia doesn't bring out PPC linux drivers. So what do i need to do to get compiz-fusion working?
Problem 2 is I can't find my Xorg.conf
I have been working on this copiz fusion thing and I was following the deal at medibuntu and got to where you run "compiz --replace" and I get this warning...
WARNING: Application calling GLX 1.3 function "glXCreatePixmap" when GLX 1.3 is not supported! This is an application bug!
WARNING: Application calling GLX 1.3 function "glXDestroyPixmap" when GLX 1.3 is not
[code]....
i am tring install compiz fushion in my desktop computer until i could install it
but i can not find the way to make it do cube and 3d effects.
if i installed ubuntu 10.04 or later on sd card, it will possible to enable compiz fusion???
Processor and memory
intel Core 2 Duo
* Intel Core 2 Duo processor with 3MB on-chip shared L2 cache
* 1066MHz frontside bus
* 4GB ram
* NVIDIA GeForce 320M graphics processor with 256MB of DDR3 SDRAM shared with main memory5
I accidentally deleted my compiz fusion Icon from my top panel and now I can't seem to get it back. Before 10.04 I could just run Applications/System tools/ Compiz fusion icon and it would appear in my panel. This doesn't work any more! when I run "fusion-icon --no-start" in terminal I get
* Detected Session: unknown
* Searching for installed applications...
* NVIDIA on Xorg detected, exporting: __GL_YIELD=NOTHING
* Using the GTK Interface
* Decorator "/usr/bin/compiz-decorator" is invalid.
* Setting decorator to Emerald ("emerald --replace")
How do you do start directly with compiz fusion 'on' meaning that you dont have to go to apps - system - compiz fusion
View 9 Replies View RelatedI tried to install Compiz on F9 Gnome and I added a startup entry (system, preferences, personal, session, startup programs). Now I can't log in to the gnome window manager, it logs in and then logs out again. I would like to remove the entry that I created in the startup programs, but I don't know which file to edit. Where the settings to the System > Preferences > Personal > Session > Startup Programs are stored.
View 1 Replies View RelatedHow to change default window manager in gnome?
View 6 Replies View RelatedIs it possible to run the GNOME session manager but not have a window manager? It would also be nice to have a panel (or at least a status notification area) that was in a window, rather than a title-bar less menu bar.
The reason I want this is that I'm using my Mac's X server and logging into a VM running Fedora on the same host. And I've noticed some things, like the ability to use USB tethering, depend on a D-Bus session being active, and possibly the NetworkManager widget in the panel.
From IRC - #gnome:<borschty> ok, then go to gconf-editor somewhere under /desktop/session there should be something like "required_components" and remove window-manager from that list. You could use something like wmctrl to change the window-type of the panel, but a) that might break stuff and b)
I'm fairly decent Linux admin (ok, i've been paid to do it for the last 10 years now, maybe better than fair), however this problem has me stumped. Ever since i dist-upgraded to 10.10 playing flash videos longer than a minute will *sometimes* lock up my window manager. I am unable to click on other windows, or links in current window. If i open a terminal after starting the video i can still run commands in the terminal after its locked up, but not use the mouse in any form at all.
I can get to tty1 or any other console, kill flash, kill the browser, etc. Until i restart gdm or kdm it is still locked up however. I have tested with both kde and gnome. Tested with kdm and gdm. Tested with firefox and chrome (both use different installs of flash plugin - chrome brings its own). I created a new user on the system to test enviroment, no luck there. I eventually reinstalled yesterday with a fresh 10.10, and still I am having this problem. It *often* happens, but not always. Always on videos longer than about a minute at a guess, i have not timed it. Only ever happens on flash videos - ie ..... etc.
I was trying to install and run Compiz fusion with fedora 12. I downloaded all the packages etc using both the gui and terminal according to some guides. When I click the desktop effects button, it says 3d is not enabled, however the guide I followed said to enter glxgears (or something to that effect) and if it came up with 3d gears then 3d was enabled...I am very confused. There was an application I ran after downloading/installing some packages that caused the screen to go white and I had to reboot. I read in another forum this may have something to do with my drivers...gotta check my graphics card specs, will post when I find them.
View 5 Replies View RelatedI made a fresh install of Fedora 13, installed the video card driver for my video card. How do I get compiz fusion to work and what do I need to install? when I enable desktop effects the system panels disappear. Also I'm looking to install that effects editor that has all the different effects menus.
Okay I think I got the menu loader and Compiz working.. for those who browse to this thread.. the answer is. yum install compiz-fusion fusion-icon the desktop cube was a little tricky to get working.
However if I enable desktop effects fromt he preferences menu the system panels still disappear.
How to enable compiz fusion in fedora 15
View 8 Replies View RelatedI am running Ubuntu 10.04 in VBOX on a Windows 7 host. I have a Nvidia Geforce 9600 gt graphics card. I would really like to get Compiz Fusion desktop effects working on it. Is this possible? I have read some threads where people have ultimately found out that the VBox guest addition drivers are not compatible. How can I determine if mine is going to work?
View 3 Replies View RelatedIm trying to enable the burn feature in compiz fusion so my computer can use the effects in the applications, places and systems taskbar how would I go about doing that ?
View 6 Replies View RelatedNot quite sure what could be wrong here. The settings are enabled, but none of the compiz functions are working. The were working on Friday. I did some searching but I'm not even sure what the problem is, or how to diagnose it. I'm running 10.10, now.. any help is appreciated. Even if you just tell me what I need to be searching for to find a solution.
View 9 Replies View RelatedCompiz Fusion set to load on boot; it doesn't. Settings checked as start on boot, it just doesn't and has to be loaded manually from desktop 2.) Desktop Drapes (wallpaper changer) also set to load on boot; also doesn't do so, even though checked to do so, and also must be loaded manually from desktop. 3.) Something is hogging CPU cycles something awful; if I have more than a few tabs in Firefox open, it takes forever to scroll or reload, and the entire system just bogs almost to the point of unusability. This same behavior exists offline when using any graphic capability (Shotwell or even just Nautilus file manager, if viewing graphics as thumbnails.
I realize this is kind of all over the place and all-inclusive, but although my experience USING Ubuntu goes on several years, it's been generally so trouble-free that I've not had to dig around under the hood much, and I'm kind of at a loss as to where to begin troubleshooting this mess. Would it be easier to just back-up and nuke/reinstall the OS?