General :: Possible To Have A GNOME Session Without A Window Manager Or Panel?
May 20, 2011
Is it possible to run the GNOME session manager but not have a window manager? It would also be nice to have a panel (or at least a status notification area) that was in a window, rather than a title-bar less menu bar.
The reason I want this is that I'm using my Mac's X server and logging into a VM running Fedora on the same host. And I've noticed some things, like the ability to use USB tethering, depend on a D-Bus session being active, and possibly the NetworkManager widget in the panel.
From IRC - #gnome:<borschty> ok, then go to gconf-editor somewhere under /desktop/session there should be something like "required_components" and remove window-manager from that list. You could use something like wmctrl to change the window-type of the panel, but a) that might break stuff and b)
I am setting up a thin client boot (over NFS) with x2go thinclient. So far everything works, the client boots over PXE, mounts the NFS dir on the server. But the x2go thinclient system does not install properly. I end up with a CLI prompt, to log in. It does not start X, not does it start the x2go client in a window managerless X session.
X2go is, in case you don't know it yet, a cool Linux X terminal session system, very much like Nomachines NXserver. I like it very much, since my experience, especially with freenx has not been good.
Now I am missing some Linux knowhow here: I know that after startup (the CLI part), the display manager is started (GDM or KDM), which starts the X server and shows the graphical login. Now since X2go does not properly setup and there is no documentation about the thinclient part, I will set it up myself.
I need the system to boot up, startx and then immediately start an X program (x2goclient), without having to log in before.
I found that putting a .xsession file in to the users home dir causes that script to be run when you invoke startx.But when I put startx in a script that runs as the last one in the runlevel (as in S05startx), it does not run at all.
What is the proper way to run X and a program on it directly, right at startup?
When i logged into a gnome desktop i got this message: "The GNOME session manager was unable to read file:'/home/(desktop name)/ICEauthority'. If this file exists it must be readable by you for GNOME to work properly. try logging in with failsafe session and removing the file." What commands do i use for that? or do i need to do something else?
I'm currently building a ubuntu distro and would like to run a script on GNOME startup. I've read about doing it through the session manager but I have to do it through chroot so I'll need to set it up as a terminal command. Is there a way to add an item to the Session Manager from terminal or, even better, a directory where I can put the script so it will run on start?
I'm curious, I believe that one of the ways that OSX make the GUI experience of *nix more 'snappy' was to ditch X and run the window manager more directly on the hardware.
If I'm looking to run Linux on a desktop, and have no interest in sending Windows to other machines on the network, can I run KDE or Gnome with no 'X' to eliminate that ever-so-slight lag with the window manager experience.
I guess basically what I'm asking is is there an equivalent of quartz for Linux?
Previous used Ubuntu Gnome with Compiz but for my basic spec intel macbook (4 years old) its a little too heavyweight. So for now Im back on my macbook with os x, but now considering going back to Linux. Im looking for a window manager that has the following properties:
Supports virtual desktop (need 4 minimum) Works well with multi monitors - can move an app with shortcut from one monitor to the other (on same virtual desktop) Can remember window position (i.e. open vim on 2 monitor) - however must coerce everything back to first screen when 2nd screen is unplugged Keyboard shortcut friendly Not too hard to install Works well with minimum hardware such as integrated graphics.
I changed the Panel and Window Manager.I'm using Unity 2d and I forgot what the default values are.I did it using Ubuntu Tweak but you can also do it with gconf-editor or throught the terminal, of course.Using Ubuntu Tweak under Startup > Session Control what are the default values for Panel and Window Manger?
I've seen this function over in KDE, but can you in Gnome (Fed12 Gnome2.28) let a window sit on top of an non-hidden panel? I've been through the config editior and can't find that choice.
The upgrade appeared to go smoothly, but now logging in to a normal session just gives me a desktop wallpaper and nothing else.If I log into Gnome-Failsafe then I get a panel and desktop icons back, but still no window managerI have to initiate metacity manually.Wondered if it was something to do with my messy personalisation settings, but a new test account I created has the same problem.
how i can change the run application window of gnome panel; i had done this with glade-3 but i dont know how to manage its signal and slots for example by clicking on a button it opens an app ,i cant manage it signals and slots
I am in the process of customizing my desktop, and I have run into a problem. As a programmer, I will invariable end up with tons of windows open. I would like to expand the gnome-panel's Window List's y size to allow more applications to show without being crunched together.
That's the way the desktop currently looks, notice the tiny Window List in the top left. That's as big as it gets. I want to expand it all along the entire left side. I have a feeling the answer is in gconf-editor, but i just can't find the right field to modify.
after upgrading to Natty (and playing around some with Unity) I noticed that the top part of the application windows are often hidden/covered by the gnome panel (see attachments).
This is particularly annoying for the rdesktop session (second jpg) which I had set up so that it gave maximum desktop size to the rdp session while leaving the panel of top. If you look carefully you see that the "panel gap" is not at the bottom of the screen, while the panel itself covers the top of the rdp window.
It seems like, that the 'anchor point' for application windows used to be '+0+24' (so just below the panel) while now it's '+0+0' in the top left corner of the desktop. I suspect that while playing with unity I reset one of the compiz options which takes care of this. But I can't find it.
After a discussion we had at my LUG tonight, I wanted to find out where Ubuntu stored that choice so as to make it my default choice.I looked in /etc/gdm, /etc/X11, and in various hidden files and directories in my home directory but could not find a likely suspect for further interrogation.
I am using fedora8. I suddenly noticed that the gnome-power-manager icon (battery icon) has gone missing from my panel. How can I get it back ? I donot see it in the add to panel list so it must have got uninstalled somehow, isn't it so ?
I tried to install Compiz on F9 Gnome and I added a startup entry (system, preferences, personal, session, startup programs). Now I can't log in to the gnome window manager, it logs in and then logs out again. I would like to remove the entry that I created in the startup programs, but I don't know which file to edit. Where the settings to the System > Preferences > Personal > Session > Startup Programs are stored.
In the murky world of X11, window managers, session managers and desktop environments I cannot seem to figure out how to achieve the following in Squeeze:
1. Leave Gnome installed, but prevent it from launching when typing startx 2. Have both X11 and my prefered default window manager (blackbox) startup when I type startx (or similar)
My ultimate goal is to leave Gnome installed but "dormant" and when I do a remote ssh -X be able to use X11 forwarding with blackbox.
I just recently discovered flubox, it's a window manager right"? like gnome? or is it like compiz fusion? if so, it is better than compiz fusion? can i use it in conjunction with compiz fusion?
The Gnome Window Manager worked fine with the ProSavage video card under Fedora 10. But after switching to Fedora 11, the Gnome Window Manager's response to graphics requests (such as selecting or moving a window) has been very slow and choppy, when running from the Live CD and from the Hard Drive. The hardware configuration is the following:
After installing the packages and restarting my machine, Fedora 11 detected ProSavage card. The 'savage' driver was loaded during startup (according to dmesg) and the ProSavage card appeared in the Display configuration, when I selected System|Administration|Display. Unfortunately, I didn't detect much improvement. Here's the entry from dmesg: [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0 on minor 0 As a comparison, I tried running the Fedora 11 Live CD on a box with an ATI Radeon video card and the Gnome Window Manager was smooth and responsive.
I'm fairly decent Linux admin (ok, i've been paid to do it for the last 10 years now, maybe better than fair), however this problem has me stumped. Ever since i dist-upgraded to 10.10 playing flash videos longer than a minute will *sometimes* lock up my window manager. I am unable to click on other windows, or links in current window. If i open a terminal after starting the video i can still run commands in the terminal after its locked up, but not use the mouse in any form at all.
I can get to tty1 or any other console, kill flash, kill the browser, etc. Until i restart gdm or kdm it is still locked up however. I have tested with both kde and gnome. Tested with kdm and gdm. Tested with firefox and chrome (both use different installs of flash plugin - chrome brings its own). I created a new user on the system to test enviroment, no luck there. I eventually reinstalled yesterday with a fresh 10.10, and still I am having this problem. It *often* happens, but not always. Always on videos longer than about a minute at a guess, i have not timed it. Only ever happens on flash videos - ie ..... etc.
I like to start Emacs as part of a login script and leave it running for the duration of my login session (which is typically weeks).
I have scripts to call emacs-client which will allow me to use a file-manager or Windows Explorer to locate files and right-click to edit them in Emacs.
I often end up with a lot of emacs windows (frames) open and I like to just be able to close them by clicking on the MS-Windows or KDE X button at the top-right.
The trouble is, if the window is the last one, this will shut down emacs which will lose all kinds of interesting history information.
As a work-around I use C-x 5 0 which won't let me close the last frame but this is often not as convenient as using the mouse
Does anyone know how to configure Emacs so that it can intercept the Window-Close button of the last frame to either request confirmation or simply disallow it?
On MS-Windows, disallowing closing of the last window may cause logoff to hang if emacs is still running but I'm not too worried about that.
I was messing around with different GUI sessions, and I wanted to try XFCE. Well, I switched to XFCE for a session, and I played around in it. When I went back to a Gnome session, however, it appears that Thunar is now the default filesystem explorer.I get the Thunar explorer. I want the Nautilus explorer. How do I fix this issue?
Is there a session manager I can use with 10.10? I would like to try Openbox but am not sure how to select it as a startup session. I would like to be able to choose between kde, gnome and openbox.
I have GShutdown 0.2 on ubuntu .when i put it on with some time it is just restarting the session and going directly to login window. "sudo shutdown -P -- --" is working properly so why the GShutdown 0.2 is not??
