I attach a picture of my future disk partitioning,as I thought it should be. As you can see, the first two partitions are 2 different windows installations. At the end of the disk, I have specified a partition as ext3 104855 MB (sda9) and swap 8192 MB (sda. What should the the mount point of sda9 be? Should I specify a partition for /, /boot, /home, /tmp, ...etc? Or it is ok to make mount point '/'?
View 5 Replies
i am installing onto a serperate partition so that one is windows and the other is linux. im in the meddle of creating it right now but im stuck on the mount point. were should the mount point be? also should file system type be ext4? and under additional size options should it be fixed size, fill all space up to______, or fill to maximum allowable size?
View 1 Replies View RelatedI have a Pc with 2 hard drive, yesterday I installed ubuntu lucid but I forgot to set a mount point (let's say /datas) during partitioning, and now I have the hard drive icon on my Desktop. I would like to set the mount point during boot, what I can I do? Insert a fstab line? If I do that, the desktop icon si still there, so, what does ubuntu do when I configure a mount point on a secon har drive during installation?!
View 3 Replies View RelatedI have a vista machine I recently put FC10 on. Through the course of figuring out wireless drivers, I goofed it enough that I was told to simply reinstall linux. I had the fedora GRUB file set as I wanted. But after I re-installed FC10 it would just hang after it searched for bootable CDs and stuff. I got the super grub CD and am able to boot into windows no issue. HOWEVER, when I select the fedora option, I get
"Error 17: Cannot mount selected partition"
I assume this means the grub doesn't know where my Linux boot stuff is. I have a separate drive dedicated to the linux install. The Vista drive is where the MBR is. So... how do I tell the grub where the FC10 install is? I've tried to reinstall FC10 twice hoping I just goofed something. edit: The standard grub file was in /boot/grub or something. Is there a file I can edit to point in the right direction?
Can i mount the partition on which windows is currently installed in (dual boot, win and ubuntu) and navigate through its folders and take files, eg. pics, songs... to place on my ubuntu desktop. Just wondering, im trying to get others used to linux enviroment and want to start transfering things wihtout making it too drastic for them. The process that i described above doesn't have to be exactly like that, but basically anything that gets me similar results.
View 9 Replies View RelatedI'm running Ubuntu Lucid formatted ext3. It boots with Grub (old Grub) in sdb6 (hd1,5) It mounts at /, and its partition, sdb6. is flagged boot.
I created a new partition for Fedora 13, 64bit. I installed Fedora in sdb8 (hd1,7), formatted ext4, and created a separate /home in sdb7, formatted ext3, so I might share it with Ubuntu, in sdb6.
Fedora installed with Grub2. It booted fine, and after adjusting references in fstab Ubuntu booted OK too, but rather roughly.
That is when I shifted the boot flag to the Ubuntu partition. So now the original Ubuntu Grub is handling boot once again. Ubuntu boots as before, but I can't get Ubuntu's Grub to boot Fedora. An earlier post suggested this code, which generated error 13, Invalid or inappropriate executable:
Code:
I tried the following code, pasted from the Fedora Grub, but it doesn't work either:
Code:
I've got alternative lines invoking the kernel, because someone had suggested omitting the direct reference to root= ....
Either way I get error 2 - Bad File or directory.
I suspect the problem may be that I'm booting Grub in an ext3 partition and trying to invoke Fedora in an ext4 partition. Does anyone know if that is the likely cause of my problem? If so I can reinstall Fedora formatted ext3.
Alternatively, can I create a Fedora /boot partition, and move/reinstall Grub there? Either way -- should I use old Grub, so both Grubs are the same?
Should I have assigned mount points to sdb8 (Fedora) and sdb7 (home)? Currently I'm not using sdb7 at all.
I'll attach a screenshot from GParted of my partitions.
I just made a new storage partition and formatted it as Ext3. Now, this particular partition is shown and can be read at the terminal "fdisk -l". However, unlike in my Mint 7 partition, it does not show in my Fedora 10.
Code: [jun@localhost ~]$ sudo fdisk -l
[sudo] password for jun:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc5e3f820
[Code]....
This partition can also shows be seen in gparted in Fedora. However, even in the "Places" tab, it does not show.
I need to copy data from a single HD, which used to be part of a Linux RAID 1. I've googled around, but can't find any clue how to mount partitions from this single HD.
Background: The HD comes from a linux based NAS box Synology DS207+. The NAS uses ext3 as filesystem. Both NAS disks are fine, but the other NAS hardware is dead and not worth repairing or replacing.
I need to create an extended partition with no mount point.Enclosed is my custom ks.cfg
install
cdrom
text
[code]....
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View RelatedAfter installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
I'm trying to understand how I can partition my hard disk to allow for a dual boot (Windows & Ubuntu) as well as allow access to a certain set of files from both Windows & Ubuntu. So far I understand that I'll need:
1 Windows boot partition ~2-4GB
1 Linux boot partition ~2-4GB
1 Linux swap partition ~1-2 GB
But I don't know:How can I keep my non-boot linux files & folders -- /home, /usr, etc. -- separate from the boot files? Do I need another partition? If yes, what size & format -- FAT32, ext3, etc. -- should it be?
If I separate, for instance, the "/home" folder only where do the remaining folders and files reside?
How can I access certain files with both Windows & Ubuntu? Do I need yet another partition, formatted in FAT32?
I would like to install XP to /dev/sda5,sda6 being karmic. (I may have a dying dvd burner as was unable to install it yesterday but..) I got in a dreadful mess with grub after attempting to upgrade to Lucid,I needed to reinstall anyway. Will I be able to dual boot or should I just start from scratch?
View 4 Replies View RelatedI must say that until now I have worked with Win2000/Xp. Long time ago I worked with Xenix and in the last 2 month sometimes with Ubuntu.Now I have brought a new PC with 320Gb HD and 4 Gb RAM, and I wish to built a dual boot system, with Win7 and Ubuntu.
View 3 Replies View RelatedAbsolute newbie to Linux (assume I'm a complete dummyhead. I don't understand anything about Linux.). Just bought 500GB HDD. Made 3 partitions, 1 for Linux, 1 for Windows, and 1 for data.
1st, installed Win XP on 2nd partition (NTFS)
Then installed 64-Bit Ubuntu on 1st partition (Ext4)
(Created a 2 GB partition and for the swap file.)
Not sure which partition is primary, extended, etc., never really understood all that stuff anyways. XP was working perfectly, till I installed Ubuntu. Now, it just boots straight into Ubuntu, doesn't give the option to boot into XP. Tried everything I know, but it will not give the option to go into XP.
I have created 5 partitions:2 GB ext320 GB ext310 GB ext320 GB ntfs400 GB ntfsI have already installed XP on 20GB ntfs. Will dual boot work if I use the 3 ext3 partitions to install Ubuntu?
View 4 Replies View RelatedI have Ubuntu 10.10 on my laptop currently and my mom would like to have it on hers as well. However, she does not want to get rid of Windows 7, or use Wubi (for some reason). So, my only choice is to dual boot it. While I was installing it onto my laptop there was an option to choose the partitioning. There wasn't an option to do this on my her laptop though because you can only have 4 partitions on a hard drive apparently. The partitions are:
NAME (TYPE)
System (NTFS)
C: (NTFS)
Recovery (NTFS)
HP TOOLS (FAT32)
Is there anyway to backup a partition (Like Recovery) and make it bootable from a flash drive/CD? Or is there any other work around from this?
I've been using ubuntu exclusively on my two laptops lately, for coding and all of my other work. I plan on installing it onto my desktop now for work as well, but I would like to retain Windows 7 so I don't have to worry about compatibility for all of the games I love to play. My question is this:When setting up my partitions, how much space (and what format) should I set aside for windows to write and read games from? I have a 500GB hard drive currently, and was planning the partitions as:
1. Windows 7 (NTFS, setup with Windows installer) ~20 GB
2. File Storage (NTFS, set up with the Ubuntu install partitioner) ~452 GB
3. Ubuntu (EXT3, set up with Ubuntu install partitioner) ~ 20 GB
4. Swap (~2x the size of my RAM) ~ 8GB
The plan is to have Windows install and execute games from the NTFS File Storage partition, while being able to access the same partition from Ubuntu for my documents, code files, music, etc.I don't know if this would work, and I'm also not sure what my file system will be like (windows or linux-y?) if it did. Will this work? Or is there a more elegant solution?
I've give up hope on ever seeing an extent-enabled ext4 filesystem driver for Windows.
View 3 Replies View RelatedI am trying to install Ubuntu 10.04 LTS on a Windows XP Media Centre Edition system.On the Step 4 of the installation which usually gives you the option to partition the disk but it only gives me the option to Erase the entire disk or specify partition manually, although this also doesn't allow anything other than totally erasing the disk. I'd ideally like to keep my Windows and I have installed Ubuntu before (but 9.10) on a different system.
View 9 Replies View RelatedSystem Layout:
Alienware M17 Laptop
2.26 GHz Quad-Core CPU
4.0 GB DDR3 RAM
Hard Drive #1: Toshiba 500 GB 7200 RPM
Hard Drive #2: Toshiba 100 GB 7200 RPM
What I was thinking of doing was putting Windows 7 Ultimate (64-bit) and Ubuntu 9.10 (64-bit) on the 100 GB hard drive - with just under a 75/25 split towards W7 (approximately 70 GB for W7 and 22 GB for Ubuntu). Would this be optimal, having the operating systems on one drive separate from nearly everything else?
Another question that I was unsure about with this setup was the swap area. It doesn't need to be on the same HDD as the running OS to be utilized, does it?
Also, any partition size adjustment recommendations.
I downloaded Ubuntu about 5 months ago and love it.Problem is, I didn't know if I wanted to make it permanent on my computer, so I used the option which allowed me to download it as an application on my Windows Vista Control Panel.How can I increase the partition (I think I only have 9 GB left on my home folder) without loosing all of the preferences, applications, and hardware solutions that I have put on there?
View 1 Replies View RelatedI recently made the move from windows to Linux and I am happy to having got rid off all the MS stuff. Trying out a few distros I decided on using Ubuntu and Mandriva (wife likes the flashier stuff, what can I say ).
My question is how can I partition my hard disk in such a way that my /home is separate from both the Ubuntu and Mandriva part but accessed by both as my default home folder.
I would like to dual boot Ubuntu and Windows 7. I have Ubuntu 9.10 Live CD and Windows 7 Pro Live CD. Ubuntu is installed but Windows 7 isn`t. I have gparted installed. I found the following directions within Ubuntu documentation.
Master Boot Record backup and re-replacement
Back-up the existing MBR, install Windows, replace your backup overwriting the Windows boot code:
Create an NTFS partition for windows (using fdisk, GPartEd or whatever tool you are familiar with)
Backup the MBR e.g. dd if=/dev/sda of=/mbr.bin bs=446 count=1
Install windows
Boot into a LiveCD
Mount your root partition in the LiveCD
Restore the MBR e.g. dd if=/media/sda/mbr.bin of=/dev/sda bs=446 count=1
Restart and Ubuntu will boot
Setup grub to boot windows
I don't want to backup the MBR and restore as listed. I would rather use the Ubuntu Live CD to reinstall the GRUB.
How do I overwrite the MBR?
Do I use gparted and change the partition?
Do I create an NTFS partition as listed above?
Or what do I need to otherwise do to boot the Windows 7 Live CD so that it will install?
I plan on installing Ubuntu 10.04 and it will be my first Ubuntu install. I plan on dual booting with windows 7 and I would like advice on partition sizes. I have a 250 GiB drive and my planned partitions are as follows.
Sda1 (PQSERVICE) 12GiB This was pre-installed should I delete it
Sda 2 (System Reserved) 100MiB This was also pre-installed should I delete it
I know one of the above is the windows recovery partition but I don't know which one
Sda 3 (Gateway) 25 GiB This will contain windows will 25 GiB be enough
Extended partition
Logical 1 10 GiB / the main Ubuntu partition 10 GiB should be enough
Logical 2 1 GiB /home this will just hold settings so 1 GiB will be enough right?
Both above partitions are ext3
Logical 3 3 GiB swap partition I have 1 gig ram upgradeable to two
Logical 4 180 Gib shared NTFS partition
I am new to Ubuntu and would like to know if you think this is proper. I have already defragmented the hard drive and will make the partitions in Gparted on Ubuntu live test from usb drive.
on a dual boot can one change the size of each partitioned section of the boot once both sides are installed ?i have a 500GB disc and i have lucid on 307 Gb and maverick on 145GB i did this so i could test mavericknow i would like to change the split to say half and halfcan i do this?i have mountmanager installed but i am not sure how to proceed
View 8 Replies View RelatedDoes anyone have any experience installing Mandriva to a dedicated partition, and configuring it for use with Grub2?
View 9 Replies View RelatedLast week I installed Ubuntu 10.04.1 on his Windows Vista machine, it has a 200GB hard-drive and he wanted 100GB for Vista & 100GB for Ubuntu on there. So instead of selecting the default partition I split it to 100GB each.
Now, however, I can't boot back into Windows and when it loads I am taken to the 'Recovery Tools' options. Have I 'cked up his partition? I can still view all the files/folders on his Windows partition from within Ubuntu however, so maybe there is a chance I can shrink down the Ubuntu partition again and restore his Windows partition?
[Code]...
i have an acer aspire one with a 250 gb hdd the hdd is currently partitioned into two parts part 1 - 85 or so gb, has windows installed part 2 - the rest which is currently unallocated. i am trying to install ubuntu so that each has its own section and will dual boot once in the ubuntu installation window, how do i set up the partition to achieve this? i am trying to install ubuntu 10.10 netbook
View 4 Replies View RelatedHere's what I want to do. I have two separate HDD
HDD 1 : 160 GB (dedicated to windows, already working)
HDD 2 : 500 GB Will be using dedicated to ubuntu (not partitioned yet)
I want to use the HDD two only for linux and this HDD is not partitioned yet. What I want to do is
- A dedicated Grub partition (/boot) on HDD 2 (Do I really need it when I am using just two os? Will it work on second HDD?)
- / root partition
- /home partition
- /swap partition
- /fat32 partition (do I need it to share files with win?)
