I just loaded octave. I ran through a few examples of how to implement a script file. Everything works until I get to "plot". When I run the "plot" command I get the following.
octave:2> test1.m
error: can't perform indexing operations for <unknown type> type
sh: gnuplot: not found
Just to double check my work, I ran the following code:
y=[1 2 3];
plot(y);
I am doing the DNS configuration for the first time. Error in named configuration:
zone localdomain/IN: loaded serial 42
zone localhost/IN: loaded serial 42
zone 0.0.127.in-addr.arpa/IN: loaded serial 1997022700
file1:9: unknown RR type 'example.com.'
file1:11: unknown RR type 'red.exmple.com.'
zone example.com/IN: loading master file file1: unknown class/type
[Code]....
A formerly working system now gives an 'error 17' at Grub instead of booting. Here are the facts I have gathered thus far.
$ blkid
n/a (no output)
$ sudo fdisk -l /dev/sda
Code:
Disk /dev/sda: 60.1 GB, 60060155904 bytes
255 heads, 63 sectors/track, 7301 cylinders
[Code]...
I'm trying to compile a program and it gives me the following:
I checked cmath-util.h:46 and cmath-util.h:48:
I'm not a C person, and the author is unavailable so far.
i am trying to compile kernel 2.6.23 on Fedora 12 After fixing a few bugs (getline error, %dil ,etc) i was able to compile the kernel made initramfs img using dracut updated grub and then booted up the new kernel 2.6.23 but it fails to boot with following error mount: unknown filesystem type 'ext4'
View 8 Replies View RelatedFormated new drive with ext3 on external drive on Suse 11.1 When upgraded to 11.2, drive was not connected... Could not get mounted after that... Set up another boot drive, could not get to mount. Found post with following:
>cryptsetup luksOpen /dev/sde1 restore
>mkdir /restore
>mount /dev/sde1 /restore
Error as follows: mount: unknown filesystem type 'crypto_LUKS' Have also got to another point where superblock was incorrect. I can use terminal, but am not a linux guru... Have looked at other posts under luks, but can not find a solution.
In my system around 73gb(pc-desktop) i have,1 primary partition(windows)-25gb, 1-extended partition(remaining gb) 3 logical partitions were there in (under) extended partition in one of the logical partition is d:drive. in my hard disk d: drive is -/dev/sda5
previosly i was fat -file system , (d:drive-/dev/sda5), i remember i changed the d: drive(d:drive-/dev/sda5) file system to ext4file system ,with following command using terminal
After doing(changing the file system)this one ,i couldnt see the d:drive data
By doing that
1q) Did i reformatted the partition? i think the new filesystem(ext4) has no knowledge of the data that was on it when it had a FAT filesystem.
2q) How to do undo operation,i tried to change the filesystem type to fat/ntfs in terminal using command --sudo mkfs -t FAT /dev/sda5.
Result:its showing text message-'mkfs.FAT: No such file or directory'(not in single quote)
I had very imp data in d:drive
I changed the first line of /etc/fstab in an attempt to get rid of an annoying message "mount: unknown filesystem type 'static'". All I did was put a "#" on the first line .... changing the original from:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
to:
#
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
I have tried desperately to get to the file system so that I can edit that first line in fstab out but nothing works and the file system comes up as read only ...
A directory on my desktop has recently become inaccessible. The error message that is given when I attempt to open the directory is as follows: Could not display "nikki stuff", The file is of unknown type. I brought up a terminal and did an ls -l on the directory, which produced the following: -rwxrwxrwx 1 nikki nikki 314 2010-07-26 19:16 nikkis%20stuff.desktop Unfortunately, the computer is not mine, so I do not know much more about how this happened.
View 2 Replies View RelatedLately, my rxvt-unicode has been generating this ~$ top 'rxvt-256color': unknown terminal type. Many of the terms have a colour patch. Where is the one for rxvt? Is there one in Debian or do I have to get creative?
View 2 Replies View RelatedI recently upgrade my armel NAS from etch to squeeze. During the partitioning step of the installation I intentionally left unmounted the data partition (900GB formatted XFS) but after the installation I'm not able to mount it.
I edited the fstab file adding the last line
And tried a mount but I get the message
So i noticed throught lsmod that I don't have the module for xfs
Tried installing xfsprogs but it didn't helped. So I searched for xfs-modules but seems it doesn't exists for armel architecture. Am I right? What does it means? That XFS is not supported in armel Squeeze? Assumed I can't transfer/backup 900GB of partition, is there a way to convert it on-the-fly to a supported filesystem format?
I dont know anything about linux and just been assigned to amount a drive to it. here's what i did so far: Version of Linux using Red Hat Enterprise Linux Server release 5.3 (Tikanga) [root]# mount -t auto /dev/sdb1 /tmp/archive mount: unknown filesystem type 'ntfs'
when checking the /proc/filesystems, i noticed that 'ntfs' is not listed there, several forum suggested i try running 'modprobe ntfs'. If that is not found, you'll need a kernel with ntfs support. i'm so lost, where to i get the modprobe ntfs
I am copying the file form one directory to another directory using shellscript.
Here i want to get the Mimetype/Content-type of the file.
How to i can get the MimeType.
I have a server hacked when i try to log in i type root but won't let me type a passwdthere are no services up, can't see page mail nothing
View 11 Replies View Relatedon my dual HD5500/GT940M. I can not turn on Nvidia. just install bumblebee and got the error "unknown header type 7f" if I remove bumblebee, Nvidia 340 loaded but system run on HD5500, no way to use Primus or to switch to 2nd card.
View 0 Replies View RelatedHow can I tell emacs that a file type that it doesn't recognise should have the same syntax highlighting as one it does?
Xfig produces .pstex files which I want to be highlighted like .ps/.eps
I had windows with ntfs I installed ubuntu. All ok. Gurb with 2 os, can ran windows and ubuntu and can mount ntfs partition in ubuntu I installed debian with lvm over ubuntu partition. I can't mount ntfs partition now, and windows doesn't appears in gurb
# mount /dev/sda1 /mnt/windows/
mount: unknown filesystem type 'LVM2_member'
# pvs --all
PV VG Fmt Attr PSize PFree
/dev/dm-1 -- 0 0
/dev/dm-2 -- 0 0
/dev/root -- 0 0
[Code]....
I can't active vg because haven't name, but is not lvm, is only ntfs partition Maybe ubuntu puts in lvm and grub? Any idea? If I change with fdisk to ntfs i lose all the information in the partition?
[Code]...
I just updated Fedora 14 with the updates it downloaded and I am now stuck with the error.
View 10 Replies View RelatedI have got fedora 13 install on my system. I wanted to know how could I perform scandisk and defragmentation like operations in linux?
View 5 Replies View RelatedI installed Ubuntu Server 9.10 in a virtual machine, and I'm trying to install the VMware Tools but I can't mount the installer CD: $ sudo mount /dev/scd0 /media/cdrom mount: unknown filesystem type 'iso9660'
View 1 Replies View Relatedhow to perform floating point operations in kernel? i answered that its impossible to perform floating point operations in kernel.but he is telling that its possible but with some feature to be added.can any body know about this perfectly??
View 1 Replies View RelatedMy script.
Code:
I cannot get it to give me the "Unknown?" output. How do I fix my script so that it will give me "Unknown?" when I type in an incorrect prefix?
I am trying to generic way to convert the string datatype to other primitive data type. To achieve, i used Template . But i getting error and couldn't resolve the issue and error reported is also clueless.
Code
====
#include <vector>
#include <iostream>
#include <string>
[Code].....
I have a "Storage" partition in my hard drive which I have labeled as such and added to fstab. This is my fstab file:
[Code]...
The problem is that when I open up nautilus and click the Computer icon in the toolbar (which gives the fake computer:/// address) I see two items referring to my Storage partition:
* Storage (which appears to be of "unknown type" in the properties).
* 500 GB Hard Disk: Storage (which is the one that works).
Running any freeglut based application from a terminal with Opensuse 11.3 cause that terminal to be spammed with freeglut messages like the following one:
freeglut (./myglutapp): Unknown X event type: 105
There are some bug reports on redhat and ubuntu as well
[url]
[url]
When I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
A colleague had troubles with a DVD that contains valuable data, no further backup available. The DVD won't run and I am trying to fix it. Have been playing around on Mac, Windows and Linux successively.
On Mac
Mac shows this message in Toast Titanium 10:
but Finder keeps telling it is an empty disc, no way to get to the files.
On Windows
Windows 7 in VMWare is not of any help.
On Linux
Just installed Ubuntu 11.04 (in VMWare) and did some checks using info on this forum. When trying to mount the disc, this is the error message. Then I used fdisk on the volume (/dev/sr0) and tried fsck. I downloaded UDFTools but cannot find any repair option like udffsck as described in this thread by the last author.
I am running out of inspiration... there are clearly data on the disc, which can be seen by just looking at its surface, but also the info on Mac. However, there might be some bad sector size in the partition table which renders it unreadable. How to recover these data?
I'm a C / assembler programmer so am not use to C++, which I need to use. Basically I'm using my own versions of memcpy, but for long and int rather than char. It's for fast graphics. So I have a char array which I copy to another array. But I copy as either longs or ints, much faster. for example
Code:
void * fastmemcpysprite (void *destaddr, void const *srcaddr, size_t len)
{
[code]...
I am using an external USB keyboard to my laptop. Suddenly (after using this keyboard for 6 months), some randomly times I need to press the button 6-7 times before something appears on screen. This happens randomly, I may be able to type a whole paragraph without problem, and suddenly I can't type anymore for few seconds. My system is opensuse 11.3 and it happened last friday 9/10 ( if it is related to any update). I tested the keyboard to another pc and it is working. I tested another keyboard to my laptop and I still have the same problem.
View 1 Replies View RelatedOn a fresh install of Fedora 12: I am trying to do a software update and keep getting these errors. I am new to Fedora but have used Ubuntu for some time. An Internal system error has occurred:
Under more details it states:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
[Code]...