Debian Installation :: Mount -unknown Filesystem Type 'xfs'
Aug 26, 2011
I recently upgrade my armel NAS from etch to squeeze. During the partitioning step of the installation I intentionally left unmounted the data partition (900GB formatted XFS) but after the installation I'm not able to mount it.
I edited the fstab file adding the last line
And tried a mount but I get the message
So i noticed throught lsmod that I don't have the module for xfs
Tried installing xfsprogs but it didn't helped. So I searched for xfs-modules but seems it doesn't exists for armel architecture. Am I right? What does it means? That XFS is not supported in armel Squeeze? Assumed I can't transfer/backup 900GB of partition, is there a way to convert it on-the-fly to a supported filesystem format?
View 8 Replies
ADVERTISEMENT
Apr 27, 2011
I had windows with ntfs I installed ubuntu. All ok. Gurb with 2 os, can ran windows and ubuntu and can mount ntfs partition in ubuntu I installed debian with lvm over ubuntu partition. I can't mount ntfs partition now, and windows doesn't appears in gurb
# mount /dev/sda1 /mnt/windows/
mount: unknown filesystem type 'LVM2_member'
# pvs --all
PV VG Fmt Attr PSize PFree
/dev/dm-1 -- 0 0
/dev/dm-2 -- 0 0
/dev/root -- 0 0
[Code]....
I can't active vg because haven't name, but is not lvm, is only ntfs partition Maybe ubuntu puts in lvm and grub? Any idea? If I change with fdisk to ntfs i lose all the information in the partition?
[Code]...
View 4 Replies
View Related
Mar 27, 2010
When I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
View 6 Replies
View Related
Mar 12, 2010
I installed Ubuntu Server 9.10 in a virtual machine, and I'm trying to install the VMware Tools but I can't mount the installer CD: $ sudo mount /dev/scd0 /media/cdrom mount: unknown filesystem type 'iso9660'
View 1 Replies
View Related
Jul 7, 2010
I dont know anything about linux and just been assigned to amount a drive to it. here's what i did so far: Version of Linux using Red Hat Enterprise Linux Server release 5.3 (Tikanga) [root]# mount -t auto /dev/sdb1 /tmp/archive mount: unknown filesystem type 'ntfs'
when checking the /proc/filesystems, i noticed that 'ntfs' is not listed there, several forum suggested i try running 'modprobe ntfs'. If that is not found, you'll need a kernel with ntfs support. i'm so lost, where to i get the modprobe ntfs
View 2 Replies
View Related
Feb 5, 2010
i am trying to compile kernel 2.6.23 on Fedora 12 After fixing a few bugs (getline error, %dil ,etc) i was able to compile the kernel made initramfs img using dracut updated grub and then booted up the new kernel 2.6.23 but it fails to boot with following error mount: unknown filesystem type 'ext4'
View 8 Replies
View Related
Mar 28, 2011
I just updated Fedora 14 with the updates it downloaded and I am now stuck with the error.
View 10 Replies
View Related
Feb 21, 2010
Formated new drive with ext3 on external drive on Suse 11.1 When upgraded to 11.2, drive was not connected... Could not get mounted after that... Set up another boot drive, could not get to mount. Found post with following:
>cryptsetup luksOpen /dev/sde1 restore
>mkdir /restore
>mount /dev/sde1 /restore
Error as follows: mount: unknown filesystem type 'crypto_LUKS' Have also got to another point where superblock was incorrect. I can use terminal, but am not a linux guru... Have looked at other posts under luks, but can not find a solution.
View 6 Replies
View Related
Mar 11, 2011
I am trying to mount a file image, like this
mount -o loop /tmp/apps.img /media/apps
But I get the following:
mount: you must specify the filesystem type
I try ext3:
mount -o loop /tmp/apps.img /media/apps -t ext3
dmesg says:
error: can't find ext3 filesystem on dev loop6.
I've also tried ext2, vfat etc. How can I detect the filesystem type of apps.img?
View 2 Replies
View Related
Apr 17, 2010
I just got an Acer netbook Aspire One. I put the Ubuntu remix on it successfully, and was using it for several days without problems. Now all of a sudden when I turn on my computer I get a grub error message with a command prompt. I've tried following the direction to restore grub but I'm getting stuck right away on the command to mount my ubuntu partition. After I type "sudo mount /dev/sda4 /mnt", I keep getting the error message "mount: you must specify the filesystem type."
View 3 Replies
View Related
Jan 28, 2011
I changed the first line of /etc/fstab in an attempt to get rid of an annoying message "mount: unknown filesystem type 'static'". All I did was put a "#" on the first line .... changing the original from:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
to:
#
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
I have tried desperately to get to the file system so that I can edit that first line in fstab out but nothing works and the file system comes up as read only ...
View 7 Replies
View Related
Apr 6, 2010
I have download file from this site and have done these steps [URL].
tar -xvf ntfsprogs-2.0.0.tar.gz
chown root.root -R ntfsprogs-2.0.0
cd ntfsprogs-2.0.0
./configure
make && make install
Still I have failed to mount ntfs partition with this command..
mount -t ntfs /dev/hda1 /mnt
or
ntfs-3g /dev/hda1 /mnt
The error is .................
mount: unknown filesystem type 'ntfs'
I am using RHEL5.4 and kernel is 2.6.18-164.el5
View 3 Replies
View Related
Jun 15, 2011
I'm trying to mount an external DVD +RW Drive so I can burn a directory from my Linux Server to disk. I think I've figured out how to mount the drive, but it only works when there's a disk with data in the drive. When I enter mount /dev/scd1 /mnt I'm able to read from the drive, no problem. When I try to do the same thing, however, with a blank disk I get the following message: "mount: you must specify a filesystem type" So I'm assuming I need to prepare the disk somehow. I've verified that the dvd+rw-tools package is installed on the RH server but I'm not sure what the next step is.
View 4 Replies
View Related
Jul 30, 2011
I used make-kpkg to generate bzImage from 2.6.39-3-686. After update-grub and booting the new vmlinuz system. I get:
"kernel panic - not syncing:
VFS: unable to mount root fs on unknown block(0,0)".
grub.cfg shows new entry
'linux/boot/vmlinuz-2.6.39.3-686 root=/dev/sda1 ro quiet'
but previous working shows
'linux/boot/vmlinuz-2.6.32-5-686 root=UUID=210a363d-c0ed-4005-b6e8-bbc
aeb7abe54 ro quiet'
Am I missing a step? (or two?). Is it possible to do this from 2.6.32? Currently running Debian-6.0.2.1-i386-DVD-1, Squeeze, /release/current/ 20110626-15:45 on a SATA 1T hd.
View 3 Replies
View Related
Apr 29, 2011
Lately, my rxvt-unicode has been generating this ~$ top 'rxvt-256color': unknown terminal type. Many of the terms have a colour patch. Where is the one for rxvt? Is there one in Debian or do I have to get creative?
View 2 Replies
View Related
Jul 19, 2010
how can i install debian on NTFS or FAT32?
View 3 Replies
View Related
Jun 16, 2010
I've upgraded my squeeze box to linux kernel 2.6.32-5. But it shows mounting "here is the uuid of / " on /root failed: Device or resource busy while booting.Here is the menuentry of linux kernel 2.6.32-5.
[code]....
View 9 Replies
View Related
Dec 24, 2015
on my dual HD5500/GT940M. I can not turn on Nvidia. just install bumblebee and got the error "unknown header type 7f" if I remove bumblebee, Nvidia 340 loaded but system run on HD5500, no way to use Primus or to switch to 2nd card.
View 0 Replies
View Related
Feb 26, 2010
I just loaded octave. I ran through a few examples of how to implement a script file. Everything works until I get to "plot". When I run the "plot" command I get the following.
octave:2> test1.m
error: can't perform indexing operations for <unknown type> type
sh: gnuplot: not found
Just to double check my work, I ran the following code:
y=[1 2 3];
plot(y);
View 3 Replies
View Related
Jul 14, 2010
I have a laptop with windows7 and ubuntu installed. When I installed Ubuntu it created 4 partitions (2 for swap and 2 for ubuntu). Yesterday, a friend of mine deleted one of the partitions (swap+linux) because they weren't being used (weren't even mounted) and he thought I could use the free space. I kept on using the laptop but today I had to reboot it. Instead of getting the usual grub menu I got this:
Code:
error: unknown filesystem.
grub rescue>
I tried using the solutions I found in lots of posts related with this matter but I couldn't fix it. What I tried was this:
Code:
#show you the available partitions
ls
#look for boot files on the partitions
ls (hd0,1)/boot
[code]....
The problem is that it doesn't recognise the commands 'linux', 'boot' or 'initrd'...
View 3 Replies
View Related
Jun 12, 2010
The problem of such standing Fedora 12-i686, with all the latest updates, the next time (do not remember what he's updated), restarted the computer ... after as soon as he began to load line (Grub boot norms) wrote many times that the Mount: You Must specify the filesystem type from the LiveCD tried all said that there was no public Linux systems, tried a single mode w that crusty file system ... tell me how best to restore the data from the HDD ...
View 13 Replies
View Related
Apr 11, 2011
We received some client data on an external USB drive. We plugged it into our CentOS 5.5 machine and I ran an fdisk -l which gave me this new info: Quote: Disk /dev/sdf: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
View 5 Replies
View Related
Feb 4, 2011
In my system around 73gb(pc-desktop) i have,1 primary partition(windows)-25gb, 1-extended partition(remaining gb) 3 logical partitions were there in (under) extended partition in one of the logical partition is d:drive. in my hard disk d: drive is -/dev/sda5
previosly i was fat -file system , (d:drive-/dev/sda5), i remember i changed the d: drive(d:drive-/dev/sda5) file system to ext4file system ,with following command using terminal
After doing(changing the file system)this one ,i couldnt see the d:drive data
By doing that
1q) Did i reformatted the partition? i think the new filesystem(ext4) has no knowledge of the data that was on it when it had a FAT filesystem.
2q) How to do undo operation,i tried to change the filesystem type to fat/ntfs in terminal using command --sudo mkfs -t FAT /dev/sda5.
Result:its showing text message-'mkfs.FAT: No such file or directory'(not in single quote)
I had very imp data in d:drive
View 1 Replies
View Related
May 2, 2011
I tried upgrading to 11.04 this morning and after rebooting grub left me at the grub rescue> prompt with the message 'error: unknown filesystem'. I've tried purging and reinstalling grub using a live-cd but no joy.
Let me know what additional information to provide. EDIT: Here is the output from the Boot Info Script
[Code]...
View 9 Replies
View Related
May 25, 2011
I am trying to install ubuntu 10.04 lts on three of my schools old computers, they are all old Celeron computers, all basically exactly the same, it installed flawlessly on the first one but on the second after restarting after fresh instillation it boots to an error saying "unknown filesystem, grub rescue>" I've reinstalled 3 times, I've looked for others with the same problem but they are all related to dual booting with windows, I wiped windows, there is mow windows involved
View 1 Replies
View Related
Jul 9, 2010
I have a following problem: Recently my drive with Ubuntu 9.4 has mysteriously stopped working, i.e. when I switch the computer on it informs me that GRUB didn't find the filesystem. Well, I suppose it happens.
First, I though it was due to the drive dying, but I popped it in an external enclosure and HDTune told me the drive was fine. Wanting to recover the files on the drive before reinstalling I first tried to mount it in said external enclosure under Windows (I have Win Ext2 driver installed which used to work just fine). This time, however, drive gets assigned a letter but upon opening it Windows popped up an error saying that the drive was not formatted and whether I would like to format it then.
Unfazed by this streak of failures I tried to mount it under Linux but, alas, to no avail. I might have tried every single -t operator under mount command but it still won't budge and let me mount.
View 5 Replies
View Related
Oct 25, 2010
I am fairly new to linux and my laptop froze so I rebooted it and now I have this error. I have tried to load the files needed using the prompt but nothing seems to work so here is my bootinfoscript thing. Any way for me to reinstall ubuntu over the sda5 partition but keep my files?
Code:
Boot Info Script 0.55 dated February 15th, 2010
= Boot Info Summary: =
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> Syslinux is installed in the MBR of /dev/sdb .....
View 5 Replies
View Related
Oct 4, 2010
I am trying to install debian on my windows PC but am receiving some errors with it. I have downloaded "debian-506-amd64-DVD-1.iso" from debian website and am seeing that the md5 sum is correct. I am getting following error when I choose Graphical Install or install.
[ 1.480788] crc error
[ 1.569788] kernel panic -not syncing:VFS: Unable to mount root fs on unknown block(253, 52)
Description of my PC: I have 2 hard disks
1. IDE hard disk (80 GB) -> windows is on this drive
2. SATA hard disk(250GB) -> I intend to install debian on this drive.
3. MSI motherboard & AMD 64 processor with 1 GB RAM.
4. NVidia external graphics card based on AGP slot(256 MB)
EDIT:: This time I got one more error message prior to the 2 shown above [some number] PCI:Cannot allocate resource region 0 of device 0000:00:00.0
View 6 Replies
View Related
Feb 27, 2011
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
View 4 Replies
View Related
Jul 20, 2010
I have installed debian recently and not able to mount any other volume except FileSystem. It says -You are not privileged to mount this volume.I have tried everything including raising the permissions of the user and changing the group to root but in vain.??
View 4 Replies
View Related
