I'm a C / assembler programmer so am not use to C++, which I need to use. Basically I'm using my own versions of memcpy, but for long and int rather than char. It's for fast graphics. So I have a char array which I copy to another array. But I copy as either longs or ints, much faster. for example
Code:
void * fastmemcpysprite (void *destaddr, void const *srcaddr, size_t len)
{
[code]...
I've been converting some C code to assembly for my homework; it was going well but I'm having trouble with a for loop for hours. I could not understand where is the problem and decided to ask. I'm posting the part where I'm having trouble of my C-code and assembly-code; every other part of codes act same and the variable values are same. I'm waiting this two codes to act same, but they don't.
Code:
mov ebx, [result]
mov eax, [i]
mov ecx, [ebx+eax]
mov [j], ecx
mov [ebx+eax], byte '.'
_loop:
mov ebx, [result]
mov eax, [i]
inc eax
mov cl, [ebx+eax]
cmp cl, 'Z'
je _continue
mov ebx,[result]
mov eax,[i]
inc eax
mov ecx, [ebx+eax]
mov [k], ecx
mov ebx, [result]
mov eax, [i]
inc eax
mov ecx, [j]
mov [ebx+eax], ecx
mov ecx, [k]
mov [j], ecx
inc dword [i]
jmp _loop
_continue:
Code:
j=result[i];
result[i]='.';
for(;result[i+1]!='Z';i++){
k=result[i+1];
result[i+1]=j;
j=k;
}
I'm trying to compile a program and it gives me the following:
I checked cmath-util.h:46 and cmath-util.h:48:
I'm not a C person, and the author is unavailable so far.
Does anyoe have any example c/c++ code that is used to parse type-length-value messages.
The only decent article I can find on the web is:
http://en.wikipedia.org/wiki/Type-length-value
Bur it does not give any examples of parsing etc..
I was wondering if there is anyone who has some kind of a small script/code (preferably in C/C++) which reads a partition and just displays the type. For example, the script/code would be called partype and should be something like this: partype /dev/sda1, will read sda1 and display for example ext4, because sda1 was formated as ext4.
Note: I'm not a developer so I have no idea how this should be done, plus I would like the script/code to do it by itself the checking, without using fdisk/sfdisk/cfdisk/parted/gparted, because none of this apps work quite well when it comes to the partition type or file system type.
I'm working on a project where I am converting a C file to C++. I have worked out 99% of the errors but there is still one lingering one that I cant seem to figure out. I get the following error when compiling with g++
Code:
mscp.cpp:749: error: invalid conversion from const void* to move
mscp.cpp:750: error: invalid conversion from const void* to move
[code]...
Parse error: syntax error, unexpected '@' in C:xampphtdocsminippromail.php on line 8 .......its not recognizing the '@' symbol. heres the code im working with
<?php $receiver = myfriend@ourmail.co.in; $subject = wish; $content = Hi! My dear friend how are you.; $sender = myself@ ourmail.co.in ; $headers = From: $sender; mail($receiver,$subject, $content,$headers); echo Mail has been sent successfully.; ?>
i wanna covert script to C code or any other method to embed this script in C code, script link [URL]
View 1 Replies View RelatedThe first line of this struct:
Code:
struct custom_int {
typedef int big_int;
[code]...
i want to run this code
[code]...
i have error in graphics. i have C++ 2005
I am novice. I am trying to create one email form. But i am getting "Parse error: parse error in F:estwampwwwsendmail.php on line 43"
Code:
<?php
if(isset($_POST['email'])) {
[code]....
I thought this question's best category would be in the newbie sectionBasically I have a C code, (for simplicity is only prints a few lines), called printx.c that I would like to convert into a binary file so whenever I have to type "printx" in the command line it would execute the programofcourse gcc will give me a binary file if I do a "gcc printx.c", but even the output file (e.g. print.outwould have to be executed following manner./print.outI only ask, because I notice programs like mailx (which is written in C) is a binary file that could be run in this manner (at least that's what I notice on my ubuntu distro)
View 3 Replies View Relatedi have Ubuntu10.10 (kernel-2.6.35-22-generic) installed. struct stat StatBuff;
[Code]...
I have mounted a windows share folder on /mnt. When i gave any directory within /mnt/ to stat function it fails with errorno 75. perror shows "Value too large for defined data type". Example 1 is fail but Example 2 works fine.
I have perl/tk installed and working. I tried using c++/tk and had to change the #include path in the headers to find the tk.h and tcl.h. I tried compiling a simple c++ program with g++ to test that the headers are correct. the line i type at console is:
g++ test.c cpptk.cc cpptkbase.cc -o test.bin
I fixed all previous errors, except for the following.
code....
I'm writing a sort of toy shell using fork() and execv(). It runs smoothly enough untill the user enters an invalid command at which point the program hangs, so I need a way to check if the program loaded using execv returned correclty or not in the parent process and kill it if it didntI tried writing stderr to a text file to see if something whent wrong but doesnt really work out. Try running ./digenv GDM -i -Q for instance. (-Q is an invalid option for grep which the program runs at a certain point).Heres the code:
Code:
//digenv
//Carl Reg�rdh 2011-03-24
[code]....
I am playing around with a new chat program and I have errors that I can not figure out. Here is what I am getting.
parse.c:1638: error: dereferencing pointer to incomplete type
parse.c:1638: error: dereferencing pointer to incomplete type
parse.c:1638: error: dereferencing pointer to incomplete type
here is the code:
if (scan->jail_timeout == 0 && scan->location == prison)
{
command_type |= HIGHLIGHT;
tell_player(scan, " After serving your sentence you are flung out"
[code]....
I have written FORTRAN77 code,also a makefile. But is not working at all. how to start looking for errors?
View 9 Replies View RelatedIs there an online resource to lookup error messages generated when compiling C++ code?
View 5 Replies View Relatedplease i try to compile the below code on ubuntu with g++ but i was getting an error message
fig03_05.cpp:10: error: new types may not be defined in a return type
fig03_05.cpp:10: note: (perhaps a semicolon is missing after the definition of �GradeBook�)
fig03_05.cpp:32: error: two or more data types in declaration of �main�
[code]...
I've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
when I execute the command from the shell command line - it works and no error code.if I do the exact same command from a perl file - it fails with code 32512.the file is created from the same perl script that runs the command that fails. file permission is 0664.
Code:
#! /usr/local/pkg/perl-5.8.8/bin/perl
print "Content-type: text/html
[code]...
I've been requested to modify a perl backup script we use which mounts a networked NAS machine. The actual mount command is called inside a system() command. In testing, I can do a test of the return value, so I'm able to tell whether or not I've mounted properly, but I can't make heads or tails out of the return on deliberate errors. (Such as mounting a non-existent box.) I'm displaying the returned value, which is 256 in my tests. The man page for mount listed error messages with values from 1 to 64, but no higher. Am I drawing this error value from the system command somehow? And what would be the best way to determine what this error means?
View 6 Replies View RelatedI just loaded octave. I ran through a few examples of how to implement a script file. Everything works until I get to "plot". When I run the "plot" command I get the following.
octave:2> test1.m
error: can't perform indexing operations for <unknown type> type
sh: gnuplot: not found
Just to double check my work, I ran the following code:
y=[1 2 3];
plot(y);
I am using ubuntu remix 10.04 on Dell mini 12 notebook. Everything is perfect expect coding in Eclipse. If any code tips window pops up, then I can't type in any letter until I click right mouse button or [Alt + Tab] to other window and switch back
View 2 Replies View RelatedAnyone know why Linux has to share a partition type code (specifically, 0700) with Windows? Why can't it have its own like some other OSes?
View 4 Replies View RelatedI need to rewrite the selenium java code into its equivalent php code.
View 5 Replies View RelatedAs a result, I want to know what this error means, and how to correct it.Here is my code:
Code:
#include <iostream>
#include <cmath>
#include <cstring>
using namespace std;
[code]....
It is once I use the 'try_crack' function inside of main that I get this error.
I noticed in phpmyadmin that we can export a database in type update. Indeed we have update... in place of insert.... is there anyone know if it possible by a command line or by a simple PHP code ?
View 1 Replies View RelatedI am trying to generic way to convert the string datatype to other primitive data type. To achieve, i used Template . But i getting error and couldn't resolve the issue and error reported is also clueless.
Code
====
#include <vector>
#include <iostream>
#include <string>
[Code].....
If I have a hard-disk with Ubuntu fully installed on it and I want to - all of a sudden - use Windows XP, is it mandatory that I firstly format the hard-disk first? So far, I have used two versions of Windows XP; one of them is from a few years before the other. Both copies of Windows XP when in start-up from booting from CD are causing errors. One of them is a BSOD error (0x0000007B) and the next Windows CD is stopping and giving me an error with setupdd.sys (error code 4). Is it required that the hard-disk is formatted before you even put a Windows boot CD in?
View 2 Replies View Related