On my computer was 2 gigabyte memory and I bought still 1 gigabyte memory. In the Ubuntu show only 2.75 instead 3 GB.I have old computer. P-IV but in the manualook for my motherboard say that can use to 4 gigabyte of memory. I have 2 questions.Why in the Ubuntu don't show all 3 GB memory?If I buy still 1 gigabyte of memory, itshe will show 4 GB in the Linux or not?
View 8 Replies
This thread [URL].. was the only one I could find on this forum that addressed the problem I am having. It also involved a Gigabyte motherboard. I recently purchased a Gigabyte GA-MA770T-UD3 motherboard which is a version 1.3 . I have a v. 1.0 of the same motherboard which I have used regularly for a year.
The problem I have is that newer versions of Ubuntu (10.04 and 10.10) don't boot reliably with the new motherboard. It will boot up to where it says "Begin: Running /scripts/init-bottom. Done." and then will stop. If I hit any key on the keyboard the boot finishes and everything is OK. Sometimes it will hang like this but often it will boot successfully without assistance. I need it to boot by itself reliably every time.
Older versions of Ubuntu (8.04 and 9.04) boot just fine with the new board. If I put the drive with the 10.04 installation in my older Gigabyte v.1.0 computer, it boots reliably every time. Interesting to note that Windows XP sp1 installs fine on the older v. 1.0 computer but I need XP sp2 in order to do a successful installation on the v 1.3. I have stress-tested the new setup for 6 hours without incident and memtested the RAM for 4 hours without error. I have even swapped RAM between the two with no resolution.
I can't find any thing in syslog to explain this. It stops just before the splash screen comes up. I removed splash with no positive result.
one2busy here, Just got a Gigabyte GA-P55A-UD4P Mb and Core i5 750. Originally had XP, then Win7, then Win7 64bit ..... all work fine. Tried to install Ubuntu 10.04, when partition section popped up it did not detect either of my Hitachi SATA drives..I went to the website and the website for this Bd, at the bottom of the page, it says that 3rd party drivers are needed for linux. Does anybody know anything about this?
View 9 Replies View Relatedi just got a new motherboard : gigabyte ma78lmt-s2 with amd760g chipset, athlon and 4gb ram
the sound codec is hda ati sb alc887 from realteci'm now already 4 days fiddling to get the sound working in ubuntu 10.04 lts without any success / progressalso the gigabyte ma78lmt-s2 is not booting from a usb stickafter 2 weeks hopeless the ma78lmt-s2 is not recommended for linuxexchanged the gigabyte ma78lmt-s2 for a biostar a880g+ and everything works straight from start
I have a Gigabyte P5100 GT Tv Tuner and i can't activate it on ubuntu. i've found drivers for all my other devices but not for this. i've searched on many sites, but no result. ubuntu also can't find itself with "software sources" or other like this.
View 2 Replies View RelatedI installed a bunch of hfs/hfs+ software and wanted to make an hfs partition. The problem is, GParted only lets me make a 2 GB partition on a 250 GB disk. Why is this so? Is there a limitation in the software, and is this that limitation?
View 2 Replies View RelatedI'm finishing setting up my new computer.I'm installing ubuntu 10.04.The motherboard is a gigabyte GA-H61M-D2-B3When I plug the computer into my stereo, I get a horrible scratchy buzzing.How can I get rid of it?More info on hardware: Quote:lspci -v | less gives a lot of output, including this:Quote:
0:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05)
Subsystem: Giga-byte Technology Device a002
[code]....
I have just installed Ubunto 10.4 on a old fujitsu laptop. But I have a new router D-link 8xx and a new Gigabyte GN-WB32L usb dongel. I think I got the insallation right but Ubunto will not detect my wifi usb modem. I can see the network symbol in uppr right corner of main menu, but it�s red marked (not connected).
View 2 Replies View RelatedI'm learning C and trying to write a program to convert gigabyte into byte. It will take 50% of the value given and then convert that value into byte. But the problem is the output goes into minus / negative value. Like, if I enter 22, I get output: -2147483648.
Code:
#include <stdio.h>
#include <math.h>
main (int argc, char* argv[])
{
[Code]....
I have a computer with 16GB of ram. At the moment, top shows all the RAM is taken, (NOT by cache), but the RAM used by the various processes is very far from 16GB.I have seen this problem several times, but I don't understand what is happening.My only remedy so far has been to reboot the machine.
View 1 Replies View RelatedI have the following install situation:
Ubuntu 10.04.1 LTS in Desktop
Motherboard: Gigabyte H55M-S2H [url]
Procesor 4x Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz.
I sound is attached to the motherboard. It works fine in windows so hardware is fine.
With Hardinfo i get the next information:
Audio Adapter HDA-Intel - HDA Intel
I have followed a few tutorials trying to fix the problem without success.
I have just downloaded the driver is in [url]
I run ./install and i get the next error:
I want to start using Ubuntu again but I gave up ages ago trying to get it to work with my Gigabyte EP45-DQ6 motherboard.I cant run from disc and I can't install.If I try to run it just takes me to a black screen with blinking cursor and that's all it does.If I try to install, basically the same.I can't get anywhere doing anything, so where do I start?How can I get it working on my system?By the way, this is with the latest Ubuntu.No, it's not a corrupt download or burn. I tried to download and burn, didn't work.I ordered a free cd, it did the same.This is an issue that is NOT related to the disc or the download of Ubuntu.
View 9 Replies View RelatedI am trying to get the 5.1 audio working on the gigabyte g31m-es2l mobo which has ALC883 audio chipset.Its onboard audio.
Its a fresh installation of ubuntu.I have set the sound properties as below.The speaker test only works for the front right and front left speakers.Rest other speakers are muted.
Also tried editing the /etc/pulse/daemon.conf file with uncommenting the audio channels from 2 to 6 and rebooting.Still its not working.
Tried running the following command and again only the front right and left speakers light up.
I had U10.10 installed prior to running U10.10 Desktop, and the wlan worked flawlessly on that.My understanding is that the packages are the same and so this should be installed with Desktop, however it will not action the final connection. The wlan is finding networks and prompts for the Key when connecting, but it never actually connects.
Quote:
sudo lshw -C network
gives the following:
Quote:
*-network
[Code]...
I just bought a gigabyte sniper motherboard and when I installed ubuntu 11.04 it does not recognize my internet bigfoot E2100 1 x Bigfoot Killer E2100 chip.
View 5 Replies View RelatedI get this error when I run "sudo apt-get install python-software-properties"
Preconfiguring packages ...
dpkg: unrecoverable fatal error, aborting:
fork failed: Cannot allocate memory
E: Sub-process /usr/bin/dpkg returned an error code (2)
I'm trying to install deluge via ssh and my vps has 512mb ram and is only using 11% of it prior to running the code.
I did a pg_dump of our data warehouse, and it is 26 gigabytes. I wanted to load this data into a different database product (one that forked from Postgresql, so its syntax is very similar).I needed to change the syntax of the "COPY" command in the pg_dump output, remove references to "public", and change the table owner name. sed did these for me (albeit slowly). The output from pg_dump is a file called "pg-dump-output.sql".
pg_dump produces this:
Code:
...
[code]...
I would like to know as to how to save a boot order sequence...In my desktop PC I have a gigabyte MOBO housing Pentium Dual Core processor...
Whenever I have to boot from an external USB , I have to press del at boot , go into CMOS features and change the Order of Booting 1-DVD 2 USB-FDD 3. USB-HDD 4. Local Hard Disk
The problem is that everytime I have to repeat the above to boot from USB...I am also confused between USB - HDD and USB - FDD...Some utils partition and use the USB like a HDD while it is not the case with FDD I guess
How do you freeze the boot order so that on inserting any USB / External HDD at boot , the system should give it the priority over local hard disk..
Also in Giga MOBO I noticed that there is no "generic USB" mentioned in BIOS...It lists the USB device by name say "Kingston Data Traveler " "Sandisk Micro" etc ....
What should I do to make the boot order permanent?
Running Fedora FC14x86_64, Mobo gigabyte GA-880GM. processor AMD dual core athlon
Here's the problem:
I've checked the correct pins on the DB9 are going to the correct socket pins on the mobo, connected up a very verbose GPS to the port, and absolutely nothing !
I tried winbows XP on another partition and got nothing in a hyperterminal.
Loaded puppy on an ancient laptop ( P2), and checked with the same cables and plenty of date from the GPS.
Strangely enough running tcpdump -i /dev/ttyS0 gives this:-
Any ideas on what I've missed to get this port up and running ?
I 've try to detect my Gigabyte onboard ( rtl8111/rtl8168B) on centos 5.0 but there are error on make module clean. But If I install with mandriva 2009, Every things run oke.
View 3 Replies View RelatedI've got an old laptop wich wireless adapter is a Gigabyte GN-WI01 GS MINI PCI(its chipset is Realtek RTL8169/8110, I believe) and I'm not able to make it run in Wifislax 3.1 Live CD. I downloaded the linux drivers for it and tried to install them following the instructions but when it came the time to execute configure.sh it told me that I had to actualize some kind of packets first(GK+ or something like that can't remember ). I also have another wireless usb adapter that I tried to use too. It's a Linksys WUSB54g v4(chipset: rt2570). I tried to follow a guide I found about making run an adapter like that on Wifislax 3.1 but when I had to "Force ralink rt73 on rt2500" it doesn't appear on my Live CD version, it appears "Force ralink rt73 on rt2570", dunno if it has something to be but I get an error while making it.
I don't know if it has to be with my laptop, my wireless adapters or my way of following the steps. If it has to be with my adapters I would like to buy some new one(not very expensive) that I won't have any problems running it on Wifislax and that will work on my old laptop(cause I just have that one and can't afford a new one).
I bought this motherboard 6 months ago and I've been hammering on it since then. I can get audio output on the analog channels but what I'd really like is output on the SPDIF (optical, digital) channel so that I can have better sound quality on my home theater system. What I've tried...-I followed the sound troubleshooting guide.-I tried the 6 stack/3 stack approach suggested on the ALSA website.-Tried compiling and installing the latest version of alsa.-Tried installing the development drivers for alsa that are put out by the ubuntu community.
View 1 Replies View RelatedI could change and manipulate all the bios features before I put an administrator password on the bios. Now that I have put a password on the bios, even when I log-in with the correct password 90% of the motherboard settings are locked and un-changeable.
View 5 Replies View RelatedI just replaced my motherboard with a Gigabyte 890GPA-UD3H. I am happy to report that the OS (Ubuntu 10.04) was smart enough to boot up using the pre-existing software RAID 5 (four disks) and work fine with the new motherboard, CPU, and memory. However, since the new motherboard has a nice onboard display, I removed the PCIe graphics card (which was needed on the old board), and am now trying to configure the OS to use the "OnChipVGA."
This is what lshw produces
And here is what I get with startx:X.Org X Server 1.7.6
Fatal server error:
I have had a fresh install of Ubuntu 9.10 and installed some software after that.Since third some, some process is eating half of my memory.I have checked processes running in system manager but everything is normal.Maximum is consumed by compiz which is about 26 mb, seems very normal.I did restarted my computer several times, and in the start for 5 mins, its fine after that again my cpu fans runs at very fast speed and my one cpu is used up 95 % (I have dual core).Please help me out, this invisible thing is driving me crazy.I am attaching my htop screen shot (sorted by cpu %), now the cpu is not used by completely but fan is still struggling hard and fast.
View 9 Replies View RelatedHas anyone installed Fedora 14 with the above MoBo and using a video card in the PCIe x16 slot? I'm experiencing boot failures when I try to boot using cards in either the x16 or x8 slots as my default video.
View 14 Replies View RelatedI have a Gigabyte M1022M netbook and I was tried to run OpenBSD, Debian Linux as well Archlinux on it with a X-Server.Everything worked great except the touchpad. It is an Elantech touchpad which should be supported by the Linux Kernel.After some time I tried to find something like a version or something else to clearly identify the touchpad but the touchpad was not listed in the output of "dmesg". There was also no entry in /proc/bus/input/devices.
View 2 Replies View RelatedI have installed mandriva 2008 spring edition. In my home i am using bsnl broadband connection. But i cannot install drivers in mandriva linux. In ethernet properties it is showing me that unknown device.
View 2 Replies View RelatedI have decided to do away with windows for the obvious reasons. I have carried out a new instal of Ubuntu 10.04. on a formatted HDD in a Gigabyte GA-510UD atom mother board and have found that I can't install the M/B drivers from the indtall disk.
View 5 Replies View RelatedI am using malloc and frees a lot in my program. It shows its allocated but when i remove it doesnt show as the memory is removed(I am using the top command to view VIRT memory usage). If this continously grows what would happen to my program (Will it go out of memory?)
View 4 Replies View Related
