Ubuntu Installation :: 11.04 Alternate Command Line Install Without Internet Connection?
Aug 5, 2011
is there any way to do a 11.04 Alternate Command Line Install without Internet Connection? I try to install Ubuntu on a Internet-Tablet, wich has no Ethernet-Port and I don't know how to get Wifi to work during Alternate-Install. At previous Ubuntu versions it was possible to let network be unconfigured and install completely from CD or USB-Stick. Isn't this possible in current versions?
View 1 Replies
ADVERTISEMENT
Oct 2, 2010
I'm attempting to install a command-line version of Maverick, from the alternate CD. I'm using the 64-bit version. The installation has gone fine - however, I'm having troubles getting the wireless to work. I've installed wireless-tools by carting the *.deb archive over from another computer - this seemed to go fine, and iwconfig shows my wireless card as "wlan0". However, even after setting the essid and the WEP key I can't connect to the internet (tested this using apt-get). I know that this wireless card requires the "rtl8187se" module, which automatically loads with the desktop version of Maverick - however, it isn't working on the command-line. Running "sudo modprobe rtl8187se" pings back an error message saying that the module can't be found. Is there a way for me to manually install it or "find" it?
View 1 Replies
View Related
Mar 17, 2010
I tried:
Quote:
ifconfig dsl up
ifconfig up dsl
ip link set dsl up
But I think I should have typed:
Quote:
ifconfig ppp0 up
Yesterday I was lost, I updated the drivers for the nvidia card and that broke X, since my internet is not up and running when booted I was wandering how to call it from the command line since that was the only thing I could see.
View 10 Replies
View Related
May 1, 2011
Is it possible to upgrade a Slackware installation from a freshly d-loaded DVD? How would one go about this? Would the procedures in the Upgrade.txt work? I would assume they would need to be modified a bit, though, since I'm only upgrading the same version of Slackware. I'm not going from say 13.1 to 13.37. I just want to update a 13.37 current that I installed about three weeks ago to the now final release 13.37. If I could get my silly Trendnet TEW 423IP wireless PCI card to work in Slack, I could upgrade the normal way with Slackpkg.
View 6 Replies
View Related
May 6, 2010
Just installed Lucid from CD ROM. I have 2 HDDs. When the install screen came to ask about partitions, it didn't seem to want me to install it onto the same HDD as my XP/Ubuntu 9.10 partitions, so I installed it onto my other HDD. After it finished, I restarted and it appeared on GRUB. It takes me to a command line where it asks me for my desktop login and then my password.
It allows me to type in my login, but the password isn't so easy. It won't let me type it in. It's as if the keyboard stops working apart from the return key. I have no understanding of command line. As soon as I'd entered my password, it went on to tell me that there were no packages to install, and then stayed on command line as if I'd just opened a terminal. How would I get it to take me to my desktop?
View 3 Replies
View Related
Nov 7, 2010
I have just installed ubuntu 10.04 via a netboot install.When my system reboots I only have the command line - no gui. Could someone kindly inform me what command I need to run in order to get a GUI
View 3 Replies
View Related
Apr 5, 2011
I cannot install Kubuntu 8.04LTS. When I run the Live CD and click to install it gets me the box that should show me my hard drives and possible partitions but the box is empty. I get the same when booting to the Live CD and clicking on install. I have had this CD since Kubuntu 8.04 was released. So not knowing what might be wrong I figure I will ask here for what to type in a command line to install it. I know it is an old version but it is the last one with KDE 3.5.
View 7 Replies
View Related
Apr 7, 2011
I recently discovered the medibuntu repository and wanted to add the repository to synaptic. I copied and pasted the code from this: [URL] web page on medibuntu.org's website.
The attachment shows exactly what the terminal spit out after running this command (and the command that was run - of course). What I am wondering about is the last six lines - which seem to indicate that, at a minumum, getting some key was not successful. I'm not sure how important this is; but, since I don't actually have anything I need to install from this repository right now, I wanted to be sure I'm squared away for when a time may come in the future.
After running the command I did the following to try and determine the status:
I went into synaptic > settings > repositories and looked under two of the tabs to see what was there:
The tab, "Other Sortware" Lists two entries at the bottom that stood out to me. They are:
Medibuntu - Ubuntu 11.04 "natty narwhal" (http:// packages.medibuntu.org/natty free non free) which was checked.
And:
Medibuntu (Source) - Ubuntu 11.04 "natty narwhal" (http:// packages.medibuntu.org/natty free non free) (Source Code) which was not checked.
The tab, "Authentication" lists a total of three entries. Their descriptions are:
Ubuntu Archive Automatic Signing Key
Ubuntu CD Image Automatic Signing Key
And:
Ubuntu Extras Archive Automatic Signing Key
None of those (under this Authentication tab) strike me as having anything to do with medibuntu (could be wrong though - just not sure).
Finally, I did a search in synaptic for a library I think should be available through medibuntu, "libdvdcss." I was presented with a list of eight items, none of them matching libdvdcss by title. The closest match by title and description that I could identify was, "libdvdread4" This I did as a sort of test to see if I might be accessing that repository.
View 9 Replies
View Related
Mar 22, 2011
I need to install a command line server without gui and smallest as possible Is there a option on installer to obtain a minimal server?
View 4 Replies
View Related
Jan 7, 2010
I did a command-line installation. I dont have an ethernet connection, only wireless. For some reason the alternate installer doesnt install "wireless-tools" How do i install it? At this point I am thinking of booting off a live USB, downloading the wireless-tolls package from here Save it to a folder in the command line installation where?) then boot back into command line and install from there But I am not that savvy with command lines, and dont know where to install to...
View 1 Replies
View Related
Nov 15, 2010
i configured DSL Connection using my broadband username & Password and while Connecting to net i used to click that Dsl connection to connect to net......but my connection does not last for long...it gets disconnected and shows wired connection s connected....so i have to click again(DSL Connection) to connect to net...... sometimes even i click for two or three times ....it wont connect...
i also need any other ways to configure DSL Connection in Command line ......do i need to configure PPPOE with username and password in command line using (sudo ifconfig pppoeconf)
View 2 Replies
View Related
Dec 18, 2010
I would like to install and manage SQUID Proxy Server using command line in Ubuntu 10.04 Server.
View 1 Replies
View Related
Feb 23, 2010
I just installed a command line version of karmic to an old desktop. During installation, DHCP failed, so I attempted to configure manually (without really knowing what I'm doing) and wound up without a connection. I've been searching for solutions, but really don't understand what I need to do. A million thanks to anyone who can help me get up and running (or at least give me a push in the right direction).I can either connect the computer directly to the cable modem via USB, or directly to my wireless router via ethernet cable. I know what the ip address for my laptop (which is connected wirelessly to the router) but don't know if that would be the same for the desktop or not, and don't really know anything else.
View 3 Replies
View Related
Mar 19, 2011
I have Fedora 14 installed on my s/m with the default gnome desktop environment. Now, I want to install some KDE applications which I found to be very useful. I want to install KDE from fedora 14 DVD as my internet connection is very slow. It was a failure when I tried pointing the yum.repos.d/fedora.repo file to DVD to install using yum. Should I create a repository like what we do in RHEL to configure yum server(How to do it in fedora ???) Or is there any other method to install KDE repository on my system.
View 4 Replies
View Related
Oct 11, 2010
The title about says it! I have a major problem on my laptop after installing updates. Some of my icons in the top panel are broken. So as a first step I need to reinstall a few things. The first step is to start the wireless connection from the terminal. So would someone please tell what the command is?
View 2 Replies
View Related
Jun 6, 2011
I want to connect to the internet using the command line. I'm 95% I have my wireless card installed correctly, since I'm using it right now.dhclient takes a minute or two, then finishes. It gives no output, success or failure. Then I open up Firefox and I'm not connected to the internet. What can I do to figure out what the problem is?
View 9 Replies
View Related
Jun 16, 2011
I'm new here but have been using different distros for a couple of years. I ran into this problem like a year ago for the first time and I really would like to solve this ( with your help now). I've already used hours trying to figure this out and seeked solutions online. So first things first:
- I want to connect to a wireless access point from CLI (for many different reasons)
- I'm using Fedora 13 with KDE and Gnome some specs:
Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) Kernel driver in use: iwl3945 Kernel modules: iwl3945
[Code]...
View 1 Replies
View Related
Sep 2, 2009
how do I set the internet time from the command line?how to make a linux machine the time server within the domain?
View 1 Replies
View Related
Jun 30, 2011
My GUI for backtrack is not working. I want to connect to internet. I gave the required static ip to my machine. but the problem is I have to give username and pasword through the browser before accessing the internet. Now here , i dont have any browserHow to give the log in credentials through command line in backtrack machine?
View 1 Replies
View Related
Sep 5, 2010
just learning qemu. Been able to figure out everything fine, except one thing: what do I need to add to my qemu command-line to give my VM access to the Internet?
I read online docs, but to be honest, the VLAN/TAP stuff they describe doesn't make much sense to me.
View 2 Replies
View Related
Apr 12, 2010
The GUI for network configuration of Fedora is marvellous such that the configuration is almost fool-proof. But how can I make the connection by hand in the command line mode? It goes okay except the very last step. When I disconnect the eth0 interface from the right-hand side of the desktop GUI, I tested how to bring it back by command line but I failed. When disconnected, the ifconfig still shows the eth0 interface, with just the ip address portion changed.
I tried "ifconfig eth0 192.168.1.xx" to give it an ip address but the connection is still down even if the ifconfig shows an ip address for the eth0 interface. Then I tried "/etc/init.d/network restart" and "ifup eth0" and also "route add defaut gw 192.168.1.1" but none of these could accomplish the same work as a single click on the GUI to connect. I am very curious about how to do it in the terminal.
View 1 Replies
View Related
Jul 7, 2010
I've tried the Universal USB Installer, but that doesn't support the alternate iso. And if I select the regular desktop one, it screws up the installation when I try to boot.
Unetbootin gives me this error during the cdrom process. It says it can't find copy files from cdrom and stuff. Well of course, there's no cdrom...
View 1 Replies
View Related
Oct 29, 2010
i have a Compaq Presario S4020WM
2.0Ghz XP2400 CPU
768Mb RAM
2 40Gb Hdd
and a HD raedon 4650 AGB 1Gb Grafics Card
I have tried to install Ubuntu with this CD and it gets past the keyboard detection part and then it tells me i need to get the CD ROM drivers via removable media, i know this is a problem with ubuntu 10.04 because i can install just fine a 8.04 ubuntu.
i don't know what to do.I have tried to install from a USB but my comp is too old for that, i know its not the specific cd because i'v used about 5 different brands of cd just to see if it was the cds i was uesing,
I would just upgrade from 8.04 to 10.04 but i get to the dbus part and the comp starts to run really slowly and eventually colors just show up, i left it for an hour to see if they would go away and fix but they didn't. Iknow my comp CAN run 10.04 because i have done it before, but i uninstalled and now i can't seem to get it to work again.
P.S. i have tried the live cd, same effect.
View 1 Replies
View Related
Apr 30, 2010
Fails to insatll from a SD card using USB, it looks for a CD rom when there is none... will not allow me to go on without a CD rom? i need to encrypt my drive? why don't the normal cd do this just like the other linux sysetems? hide it if you have to.
View 1 Replies
View Related
Jun 19, 2010
Today I decided to replace my 9.04 install with 10.04. (I did this on a separate hard disk.) As I am a big fan of LVM I used the 'Alternate' install CD. Everything installed fine.
However, upon booting I observed two things: firstly there was no grub menu. No countdown timer, no menu. Just a flickering cursor. After 15 seconds or so I got a message telling me that:
Code:
/dev/mapper/bromine-root (My root partition.) does not exist and that it had given up waiting. Finding this kind of strange I tried the alpha of 10.10 --- same again. Hence I have two questions: firstly, where did the nice grub menu go; secondly, what is wrong with LVM and grub these days? At the initframfs prompt I am thrown to there are some LVM utilities and they appear to show my volumes.
Switching back to my old pair of hard disks and everything works as expected (i.e, the hardware is fine and supported by Linux.)
View 2 Replies
View Related
May 16, 2011
I downloaded the Xubuntu 10.04.2 Alternate Install CD ISO file from http://mirror.anl.gov/pub/ubuntu-iso...10.04/release/
When I checked the md5sum of the downloaded file, however, there was a mismatch.
The md5sum given at both http://mirror.anl.gov/pub/ubuntu-iso...elease/MD5SUMS as well as https:[url].... is 209cfc88be17ededb373b601e8defdee *xubuntu-10.04.2-alternate-i386.iso but running the command,
Code:
md5sum xubuntu-10.04.2-alternate-i386.iso generated the following, obviously different checksum for me:
098674ad5a59f0115030c5c0c3973899 xubuntu-10.04.2-alternate-i386.iso
(It also took unusually long to generate the checksum- around thirty minutes.)
Is it possible that the file was corrupted or tampered with on the server?
View 3 Replies
View Related
May 16, 2011
I cannot install ubuntu on the machine below. It cannot mount the cd-rom drive for some odd reason (SATA drive).
How can i install ubuntu onto this machine?
View 1 Replies
View Related
Aug 27, 2010
UPDATE: decided to reinstall and run the partitioner to get rid of the raid. Not worth dealing with this since seems to be lower level as /dev/mapper was not listing any devices. Error 15 at grub points to legacy grub. So avoiding the problem by getting rid of raid for now. So ignore this post. Found a nice grub2 explanation on the wiki but didn't help this situation since probably isn't a grub problem. Probably is a installer failure to map devices properly when it only used what was already available and didn't create them during the install. I don't know, just guessing. Had OpenSuSE 10.3 64bit installed with software raid mirrored swap, boot, root. Used the alternate 64bit Ubuntu iso for installation. Since partitioning was already correctly setup and the raid devices /dev/md0,1,2 were recognized by the installer, I chose to format the partitions with ext3 and accept the configuration:
/dev/md0 = swap = /dev/sda1, /dev/sdb1 = 2Gb
/dev/md1 = boot = /dev/sda2, /dev/sdb2 = 256Mb
/dev/md2 = root = /dev/sda3, /dev/sda3 = 20Gb
Installation process failed at the point of installing grub. It had attempted to install the bootloader on /dev/sda2 and /dev/sdb2. I moved on since it would not let me fiddle with the settings and I got the machine rebooted with the rescue option on the iso used for installing. Now, I can see the root partition is populated with files as expected. dpkg will list that linux-image-generic, headers, and linux-generic are installed with other supporting kernel packages. grub-pc is installed as well. However, the /boot partition or /dev/md1 was empty initially after the reboot. What is the procedure to get grub to install the bootloader on /dev/sda2 and /dev/sdb2, which represent /dev/md1 or /boot?
Running apt-get update and apt-get upgrade installed a newer kernel and this populated the /boot partition. Running update-grub results in a "/usr/sbin/grub-probe: error: no mapping exists for 'md2'". grub-install /dev/md2 or grub-install /dev/sda2 gives the same error as well. Both commands indicate that "Autodetection of a filesystem module failed, Please specify the module with the option '--modules' explicitly". What is the right modules that need to be loaded for a raid partition in initrd? Should I be telling grub to use the a raid module?
View 1 Replies
View Related
Feb 21, 2011
Running 10.04. For some reason, starting today, I have no internet connection unless I run this command in terminal - sudo dhclient eth0. I have a hard wired ethernet connection on a Desktop PC with a static IP address (there are a number of devices in the house) and it has been running 100% for months and months. Why suddenly do I have to enter this command to get connection? When I switch on I get a connection in that when I click on the Top Panel icon and right click Connection Information it tells me I have an active connection to my router on the normal IP address. I cannot ping the router and Firefox says Server not found. After sudo dhclient eth0 everything works - what has happened since yesterday evening and this morning to stop what has been 100% for months?
View 6 Replies
View Related
May 29, 2010
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies
View Related
