Software :: Command Line Cd Command Not Working Right
May 4, 2010
Using netbook asus 1005ha with lucid beta 1 with most of updates on learning to use the CLI and headaches cd command does not seem to reconise directories here is a sample
Code:
yeh i know read the f#####g manual i am but any help would be greatly accepted tried sudo with same commands same problem did have a problem on my debian system that was to do with paths this is not the same on a different footnote anyone thinking of upgrading to lucid sit tight on 9.10 there are still to many issues that need ironing out for a system that is your main system.
View 6 Replies
ADVERTISEMENT
May 29, 2010
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies
View Related
Jun 18, 2010
Code: cmd='date | wc'
$cmd If this script is executed, an error is generated. The reason written was that "The execution fails because the pipe is not expanded and is passed to date as an argument".What is meant by expansion of pipe. When we execute date | wc on the command line, it goes fine.then | is not treated as an argument. Why?
View 4 Replies
View Related
Mar 26, 2011
I know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
View 5 Replies
View Related
Apr 30, 2011
I installed the Berkeley DB on the Ubuntu server and tried to access the dbxml from the command line and it returns command not found
path/to/dir/dbxml-2.5.16/install/bin$dbxml
-bash" dbxml: command not found
Can someone point me in the right direction
View 1 Replies
View Related
Oct 25, 2010
I tried
Code:
chown -R owner:group *
which does not work on the invisible directories (why?). When I used ".*" as wildcard it changed all (visible) files including the parent directory (the one I was currently working in which is the "dot") . I can change the invisible directories owner and group using dophin but how is it done from the command line?
View 9 Replies
View Related
Feb 17, 2010
how to pass something more than a one-command startup for gnome-terminal. I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
[code]....
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
View 1 Replies
View Related
Feb 16, 2010
I am trying to learn how to pass more than a one-command startup for gnome-terminal.
I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
USAGE="
${0##*/} [-x] [-g]
code....
However, running with the -g option to invoke gnome-terminal, I get a "There was an error creating the child process for this terminal" error.
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
View 4 Replies
View Related
Oct 25, 2010
I have a few alias' in my .bashrc to save some typing, mostly ls type variants.
I wanted to add the following:
- give me a Long listing of ALL in Reverse Time order, (don't recurse directory)
Code:
But it doesn't work anything like the way it does on the command line
When I use the alias I get the following:
Code:
No Time, No Permissions, no group/owner ... , Why?
View 2 Replies
View Related
Oct 15, 2010
I'm trying to convert this awk command from command line into an awk script, but just cannot get it to work:
This is what i have after my BEGIN
Am i missing something here? this just prints out the count for everyline, not counting lines on 5th field that match 'A'
View 1 Replies
View Related
Jul 6, 2011
I wanted to run a little media server in my house, shared with my laptop only, so I could free up space on my laptop drive. I took one of my Linux boxes out of my render farm and loaded up a minimal install, command line only of Ubuntu Lucid from the mini ISO (32 bit). I had to plug in a lan cable to install, but I wanted to move my box back out to the "farm" that doesn't have wired access to my intranet.
After much research, trial and error, this is what worked for me. My wireless card uses an Atheros AR5001X+ chip, and it works with the desktop cd out of the box. I found the "just works" desktop install uses the ath5k driver that is now included in Lucid, but I'm not using a desktop or window manager. I haven't tried this on server version, if you do, let others know what you had to install to get it to work.
The things I do tell you about, I instruct you as if you are a newbie, however I have left out some things that users should know or be able to lookup easily, like if you want a static address instead of using dhcp. You may not need all of the steps or you may have to do more research and troubleshooting.
Find your wireless card (you may need to lookup what to do if it is not recognized at all)List all pci devices, only show network devices (-v verbose, -vv very verbose): >>lspci -vv | grep Network List all hardware (| less lets you pause at each page - arrow keys, page down/up to navigate, q to quit) >>lshw | less
[Code]...
View 1 Replies
View Related
Apr 29, 2011
Some of my short cut keys seem not ot be working. Ex Alt +F2 dose not open a pop up command line. Also would like to add some short cuts. Like Ctrl + Alt+ Backspace for reboot. I went to the short cut app and I can add a short cut key, name it, but can't seem to figure out how to assign it a function. Didn't seem intuitive to me. I'm using the UNE version on a asus eel 1000.
View 1 Replies
View Related
Aug 13, 2010
I am trying to get my standard PS/2 Wheel mouse working on the Console command line, and seem to be having major problems getting it to work.
For the record, I am NOT talking about X, Xterm's or any Graphical Interface, my mouse wheel works fine in these environments.
I am purely concerned with getting the mouse wheel to work on the Console.
After many hours of reading forum posts about getting the wheel to work on the Console, this is what I have tried to date:
1. I have downloaded and installed every version of gpm I could find in the hope that one would utilise the wheel. (No Success).
2. I compiled and installed the latest version of gpm stable (1.20.6) to see if the wheel would work with it. (No Success).
3. I have tried setting up gpm-1.20.6 as a repeater to X, using every string I could find (msc, ms3, pnp .. etc), as well as every /dev entry in xorg.conf /dev/mouse, /dev/input/mice/, dev/gpmdata/, /dev/psaux ... etc). (No Success).
4. Created directories and configured a gpm.conf to both /etc/ and /etc/conf.d/ in the hope that gpm was looking for them there (read that in one forum or another). (No Success).
5. I then tried to find mouse wheel patches for gpm, and then downloaded the relevant version source gpm.***.tar.gz to go with these patches. Nearly every single one of the patches failed to apply (using patch -p1 >), except for one version I tried that did apply ... but then failed to make (stating that the source had a different signedness or some such thing) ??? (No Success).
6. I looked into IMwheel, but that seemed to be a purely X program that was a lazy way of writing ZAxisMapping in xorg.conf. (No Success).
So now I am stumped ... Does anyone know if if is possible to get:
a). A Wheel Mouse Patch for a recent version of gpm (1.20.6) that will actually apply, and then make?
b). A prepackaged recent version of gpm-1.20.6.tgz that has been patched to enable the wheel that I can use?
c). Any other information that may enable the mouse wheel to start working on the console.
View 6 Replies
View Related
Jun 24, 2011
how do you write the ASCII character #27 in the vim command line?
View 6 Replies
View Related
Jun 30, 2010
Whilst I have used GUI-based Linux distros for the last few years, I am now struggling somewhat when it comes to setting up a server from the command line. All the howto's I've read so far tell you how to set up certain things, but I don't know what I actually need to set up.Rather than asking the same questions all over again on a forum like this, and generally being a bit of a noob, I wonder if there's a resource somewhere that someone could direct me to in order to know what I need to do to set up a fileserver.
The hardware is all done, and I will probably set up a router distro like IpCop to manage the network, but I'm rather lost as to what packages I need, and how to know what the server is/isn't doing.I've used plenty of command lines in the past (ms dos, amiga dos, BASIC programming etc), just not a linux command line. All I've ever done is mount a few drives, use nmap and started x
View 1 Replies
View Related
Dec 9, 2010
I have a many text files that have XML tags all shoved into 1 line. I want to create a new file that splits each XML tag onto a new line. code...
View 3 Replies
View Related
Feb 24, 2011
I'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
View 5 Replies
View Related
Aug 22, 2011
How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt
View 1 Replies
View Related
Aug 18, 2009
I want to run a linux command with apache through web browser and that's is not working. and it's working properly when I execute this command through terminal, where is the problem?
NOTE: apache have the privileges to execute the command
View 7 Replies
View Related
Oct 29, 2010
I have made lvms with gentoo but my technique seems not to be working. I have a disk /dev/sdb1 which I made after the system install on disk /dev/sda1. I am trying this:vgscan
vgchnage -a ypvcreate /dev/sdb1lvm bitches out with:[yo@with]# pvcreate /dev/sdb1 Device /dev/sdb1 not found (or ignored by filtering).X is not installed and system-config-lvm is not working with the command line.
View 5 Replies
View Related
May 8, 2010
How can we do everything, or as much as we can do, from the command line? In particular, I am trying to get rid of the top panel in Ubuntu. Because,
1) It takes unnecessary valuable space.
2) Even if I use a huge monitor, it introduces distraction to me while working.
I created a shortcut so that with a single keyboard key I can open a terminal. For example, if I want to restart the computer, I use: "sudo shutdown -r now". Or I can even create a shorter alias. So I do not need the logout menu. But my problem is, some programs put an icon on the top panel when they are working. So, what is the best way of using command line, and getting rid of the top menu.
View 5 Replies
View Related
Sep 5, 2010
I was wondring if 7zip still only runs in the command line. I searched and got a bunch of old threads like this: [URL].. but I'm not sure if that has changed since 2007. A GUI would be awesome.
View 2 Replies
View Related
Sep 17, 2010
I have a virtual private server that I SSH into. While I am using SSH, I need to be able to FTP from command line to another server. I want to do this in the easiest most sure way possible. (I am not using my real IP below for security.) I have tried the following commands.
sftp 10.99.99.99
ssh: connect to host 10.99.99.99 port 22: No route to host
Couldn't read packet: Connection reset by peer
ssh 10.99.99.99
ssh: connect to host 10.99.99.99 port 22: No route to host
View 5 Replies
View Related
Dec 7, 2010
About two months ago I upgraded my dual boot Linux-x86-64 Vista from Heron to 10.04 Lucid. Initially everything worked fine including wireless etc. Once I accidentally changed a few /etc permissions which caused a problem, but fixed it going into recovery mode. For the past weeks, I only used the windows. Over the weekend I tried logging into Ubuntu, the gnome would not come up. So, I went into recovery mode and typed "sudo apt-get update && sudo apt-get upgrade" which also went through. However, after that I lost the recovery options. I had used that command very successfully in the past. Right now, I have no command line that would allow me to type something. I was wondering if there are any keys Alt+Del + something that would give me a prompt I can work with. I'm totally baffled as to how this can happen.
View 1 Replies
View Related
May 10, 2011
I have installed java runtime and I need to run jar file,Im not using gnome desktop,so I need a command to run it.Im using fluxbox.
View 2 Replies
View Related
Feb 5, 2010
I need some info on this title for class
View 1 Replies
View Related
Apr 1, 2010
trying to install the latest NVIDIA drivers:
I need to disable the X server to install it, which brings me to a blank screen prompting for a login before continuing. it reads thusly:
Ubuntu 9.10 chris-linux
chris-linux login: [i would assume i put in chris here...]
Password:[i type the password i use to login from the normal GUI screen, however i see no indication that im typing anything..]
Login incorrect
View 4 Replies
View Related
Jan 21, 2010
Just want to know what OS is, Fedora/RH/... Tried the following on a redhat machine:
uname -o : GNU/Linux
less /proc/version:
Linux version 2.6.18-164.el5 (mockbuild@x86-002.build.bos.redhat.com)
(gcc version 4.1.2 20080704) (Red Hat 4.1.2-46)) #1 SMP Tue Aug 18 15:51:54 EDT 2009
What is the right command to do it?
View 9 Replies
View Related
Apr 3, 2011
I installed Ubuntu 10.10 some time back and what I encounter is that for the first time that I log in it shows graphical interface but from the 2nd time onwards it goes straight to the command line. I have tried few things which were I found out on other forums but nothing seems to be working. how can I log in to GUI rather than command line.
View 8 Replies
View Related
Apr 28, 2010
direct me to a good beginner's guide to Debian? Or explain some things briefly. Where can I learn how to use the Terminal Command Line? How do you add programs to Debian and what all is supported? What are packages in Debian and what can they do? Installing programs is different as expected. I tried installing Firefox, I downloaded it and extracted it into my home directory. I can run it with the Terminal Command: ~/firefox/firefox [When in the home directory] and it works. Is that how it is intended to work? Just random thing there. I guess in a sense, I just really want to learn about every aspect of Debian Linux in a user-friendly type environment.
View 3 Replies
View Related
