For some reason the printer configuration window opens so that about the bottom 1/4 of it is off the screen.
I cannot resize it or see what is down there. When I click on my printer (epson work force 610) I can see the Driver details line but I cannot see below that so I have no idea what driver I am using. How come this window opens so tall and is not re-sizable??
If you don't know, users are able to quickly resize windows using the "ALT+MiddleClick" key shortcut/combo. Basically, hold the ALT key, and mouse middle click and hold on a window. Move the mouse around, and it will resize the window for you.
STEPS TO REPRODUCE:
1) Open a single Window.
2) Near the bottom-right-hand corner of the window, ALT+MiddleClick and drag. It should resize. Great. It works.
What Doesn't Work:
Now, the problem arises when you have multiple windows open on the desktop, they are "layered". i.e. you might have several windows open "behind" the one currently "up front". Example:
If I try to ALT+MiddleClick the "foreground window", it rarely actually resizes THAT window, and instead jumps one of the windows from behind to the front, and resizes that one instead!
STEPS TO REPRODUCE:
1) Open 3x gnome-terminal windows and say some nautilus window. Place them overtop one another. (like the above image)
2) Try to ALT+MiddleClick the foreground window.
3) Repeat this always trying to grab the foreground window.
For me, the window manager seems to bring some window from the background to the front! Desktop Recording of the Problem: [URL]
Running:
* Ubuntu 10.10
* compiz window manager (the problem does not occur with metacity)
* ATI Radeon RV770 (HD4870) w/ open source Radeon Driver (same problem w/ fglrx driver)
* Versions: [URL]
I'm running Lucid 10.04, and I found something rather annoying that I can't find in the forums after a few searches, and would love to see fixed or hear a current solution for. When I try to manually resize a window (like FF or the terminal), I can't grab the left or right sides of it, only the top, bottom, or a side/corner that's flush against the side of the screen. The grab arrow barely appears for the most atomic fraction of time, and sometimes, even if moving slowly, doesn't appear at all. It's not a SUPER big deal, just an annoying aspect of the GUI. If I use my touchpad, I can grab a side if I move super slow, but I hate using that. I use a LogiTech M215 optical mouse. Realistically, I could just change mouse settings a bit and experiment, but that doesn't fix the problem that the "grab area" of the edges of a window is really, really tiny.
View 4 Replies View RelatedIs there a way to increase the area around a window that can change its size? When I'm using the touch-pad I'm not that stable (to much coffee) and find it really had to get the mouse to sit on the one pixel that allows you to resize a window. Or another way to resize a window?
View 6 Replies View RelatedI am running Ubuntu 10.10 and the window for Gnome Color Chooser that I have installed is no longer able to be resized. I can move it around when I do an alt + mouse click, but the window is too big to view all of the options it contains. The normal ability to resize the windows by their corners no longer exists on the program and the keyboard shortcut to resize the window does not work either.
View 2 Replies View RelatedI must have done something to my window settings cos those three buttons in the top right corner (minimize, maximize and close) are gone. I also cannot resize the window or move it around using the mouse What did I do? And more importantly how do I fix this?
View 7 Replies View RelatedThis isn't a HUGE deal, just a little annoying. When I move the cursor to the edge of a window to resize it, i only get the resize arrow in a very small area and it takes me several tries to get it just right. Is there anyway to broaden the resize area threshold or something?
View 9 Replies View RelatedI have Ubuntu 10.10 running on a partition off of my Win7 hard drive. The thing I really like about Windows 7 is when I hit windows key+left or win+right, the current window will snap over to the left half or right half of the screen, respectively.
View 2 Replies View RelatedIs there a way to make bottom-right window resize handles disappear in Ubuntu 11.04? I run a tiling window manager and thus have no use for them, especially since they can distract and cover information. How do I make them permanently go away?
View 2 Replies View RelatedUbuntu classic screen. When window is moved beyond top or right border it is automatically enlarged. How to disable it?
View 2 Replies View RelatedI was wondering if it's possible to remove the triangular resize window button from the bottom-right corner of a particular window (or all windows, doesn't matter). I recently made it so that I have a transparent terminal (with no title bar, borders, etc.) docked onto my desktop, but the one thing I can't get rid of is the ugly-looking resize button hanging out by itself in the middle of the screen.
View 3 Replies View RelatedLike, if I drag a window to the top of the screen, somehow this is supposed to mean I want the window full screen. Screw that if I wanted it full screen I'd have clicked the button on the top of the menu. Windows 7 does this too and it just as annoying.
View 6 Replies View Relatedthe resize of the window in gnome in 11.3 was by dragging a blue screen indicating the resize area of the window now its by dragging the whole window which results in a very sluggish experience on my intel VGA here how can i change it to the old blue way ?
View 2 Replies View RelatedI can't move/resize/decorate/restore the vlc window. It takes up the entire screen (even though it is not in full screen mode) on one of my monitors. I'm using Openbox. This doesn't happen with any other type of window.[URL]..
View 4 Replies View RelatedI setup fedora 14 64 bit today itself and am loving it! But the problem i am facing is in compiz! When i enable desktop effects from System/Prefrences/Desktop Effects, everything works absolutely fine. All the effects... But when i try to resize a window, Compiz crashes and all the borders of the window disappear. The ABRT shows an error. Here is what it says
Package: compiz-0.8.6-3.fc14
Latest Crash:Sun 09 Jan 2011 05:44:37 PM
Command: compiz --ignore-desktop-hints glib gconf gnomecompat --replace
Reason: Process /usr/bin/compiz was killed by signal 11 (SIGSEGV)
Comment: None
Bug Reports:
The thing is I can resize the window vertically, but horizontally I cannot. When I put the pointer on the right or left edge of lancelot window the pointer becomes the resize pointer, but usual click and drag does not do anything on the window. Vertically it works fine.
Can I just delete Lancelot setting file to reset it? It seems I could not find where the settings are.
I am unable to add my USB printer via the YaST2 Printer Configuration setup tool in openSUSE 11.3. The printer, a Dell Color Laser 1320c, was last used with openSUSE 11.2, and setup was entirely uneventful. No driver is provided by Dell, so I used the Fuji Xerox DocuPrint C525A Linux driver. The problem: To add a print queue in 11.3, a Connection must be specified (parallel, USB, network, etc). However, the configuration wizard fails to show the presence of the USB print device.
[Code]...
This printer was working just eight weeks ago under 11.2, and 11.3 is obviously able to detect its presence and identify it correctly. I feel certain the solution is simple, but I haven't found documentation that provides the answer.
I used linux for a long time now, mostly ubuntu-based distros but these days I decided to try openSUSE. Must say, It is a really nice distro, with lots of new features. There is one that I never seen before but I admit it is very useful: the auto resize window feature. I use the 11.3 (KDE) (milestone 4) version. Just wanted to ask if this is a package for ths or is hard-coded into the system? And is it KDE-specific?
View 2 Replies View RelatedI'm a big fan of Gnome's alt/middle-click to resize a window. However, it doesn't work anymore for me, and I believe it stopped working (or got toggled off) when I installed the Unity desktop package (just wanted to check it out).
View 1 Replies View RelatedDoes anyone else know of a terminal emulator that scales the fonts automatically when a window is resized?
My eyesight is horrible but I want to use more terminal applications. I also use AwesomeWM for tiling, so windows resize frequently. Also on the short list are cut/paste by keyboard and good support for launching links.
No where are how enable get back minimize resize close buttons windows top tab Fedora 15 Gnome3 gconf2
There is a question about this in this thread but the thread title did not have any of the above words in it and since most "new" folks don't think to use the "posts" option, I thought I'd make a new titled post.
This seems to be a big irritant of a lot of people around the net with Gnome 3 so I'm going to confirm what other people have said about how to fix the situation.
In "add software" enter this search term:
gconf
You will see quite a few returns, you should click the following:
A process-transparent configuration system (G Conf1-2.3 yada yada)
Graphical Gconf untilities (it may be pulled with the above however).
Install it/them.
One can then type "Gconf2" in terminal and it will open but then close when the terminal is closed, or one can go to activities/applications/tweak advanced settings( the symbol will be the same as for settings in Gnome 3).
In the "Shell" button one will see "Arrangement of buttons on the title bar". Surprisingly, "All" will already be apparent. One need merely verify that it is on "all".
Close gconf.
Nothing will have happened in terms of new buttons even if one closes and opens, say FireFox.
Then reboot.
After the reboot, all three buttons will be present.
There are not a LOT of configuration items in gconf2 but this one seems to be of paramount importance to a lot of people.
One can also do it from command line, and if someone wants to post that please feel free it won't hurt my feelings.
I'm trying to resize tmp file using gparted. So I used gparted live cd and then i resized the tmp file but delete the old /tmp partition without backup. Now, my pc do not start. I have Debian 8.
View 14 Replies View RelatedI would like to resize the /home partition but it is mounted and when umount is run, it errors with 'busy'.
System Configuration:
I installed jessie on a laptop with one SSD. I used guided partitioning and selected the whole drive with multiple partitions. The /home now takes up 420 GB. I would like to reduce that to 20 GB to make room for another partition.
What are the methods reduce this partition?
I'm using an up-to-date installation of Squeeze with the default Gnome desktop and am trying to print. My knowledge of configuring printers is very limited if it even exists. Since a friend of mine is able to print from her Ubuntu computer, my plan is to copy her. Here's how she does it. She goes under System->Administration->Printing on the desktop. Then a window pops up titled "Printing" that lists various printers that are supposed to exist. It's possible to add one by selecting Add->Printer. It asks for the root password and then a new window pops up titled "New Printer" which has a subwindow called "Select Device" In my case, the "Select Device" window has the following options to choose from:
- AppSocket/HP JetDirect
- Internet Printing Protocol (ipp)
- LPD/LPR Host or Printer
In her case, she has an extra option called "Windows Printer via Samba". This is the option that she uses. The other options don't seem to work for her. I'm assuming that I just need to install some package in order to make this option magically pop up for me. Does anyone know what package this may be? I currently have the packages smbclient, samba-common and samba-common-bin installed..........
Ever since I upgraded to 10.10 (32 bit) I have serious trouble resizing windows. Seems to be accross all applications, from Chrome and FireFox to Thunderbird, Vuze and even the terminal for shell access.The problem is that the upper right corner does not seem to be active all the time. The normal way to resize a window is to hover your mouse/pointer over the upper right corner, and when it turns into an inverted L shape, grab the corner and drag it to resize the window.With 10.10, sometimes the active portion is down a 1/8" or in a 1/4" or in and down. Its rarely at the proper point of the frame of the window.I don't remember this problem at all on my 10.04 installation.
View 7 Replies View RelatedI have 2 PCs, 1 ubuntu and another kubuntu. Both are lucid 10.04.I have a network printer. On ubuntu I cannot find my printer model listed, but ubuntu gives the option to search for drivers online. This method succeeds.On kubuntu there's no such option. I cannot install my printer driver.
View 4 Replies View RelatedI have an "HP Deskjet d1400 Series" using the "hpijs, 3.10.2 (color)" driver. When I attempt to print a test page from the CUPS web interface, it works. However, when I try to print from an application, such as Okular or Iceweasel, the only option is "Print to file". I have hpijs and hplip installed.
View 3 Replies View RelatedI have a Brother DCP585CW and have installed the drivers from Brother and it worked fine on Ubuntu 9.10 on both my desktop and laptop. I have installed 10.04 on both and now the problem. It works fine on the desktop but I get a problem on the laptop. It is a wireless printer and I can print to it but only after I do 2 things each time I reboot the laptop. I have to configure it through cups (http://localhost:631) because it keeps getting set to being connected via USB and letter rather than A4 paper on each boot but the correct setting is:
Code:
Description:DCP585CW Location:Landing Driver:Brother DCP-585CW CUPS v1.1 (color)
Connection:lpd://192.168.1.66/binary_p1 Defaults:job-sheets=none, none media=adobe_A4_8.125x11.5139in
I also have to correct it via System/Administration/Printing and setting A4 and setting it to the default.
I have finally given up trying to get to a printer on my windowsXP pc to work with my linux box and need some assistance. The printer is a hp photosmart c5500 series. My linux box is running lenny and I have installed the cups and samba applications. The linux box is networked to the win pc on a win network using a eth0 link. The link works as I have internet and e-mail connections. I have configured the smb.config file as follows:
[Code].....
I have run the tests in the samba checklist and the connection is apparently working. Pings to the windows pc,, the notebook, and the linux box all return the proper results. The "smbclient -L w.x.y.z" return shows the windows shares that includes the above named printer. When I try to connect the printer using the kde cups wizard or get into the c drive on the windows pc I get the NT_status_access_denied message. I get the same return when I try the "smbclient //username:passwd@wincomputer" I downloaded the appropriate drivers from HP and tried the lpadmin comand and instructions in the Debian mini-Howto but get the return of "lpadmin: No such file or directory" when in fact all the files exist and have correct permissions etc. I have a Ubuntu OS running on a notebook computer (dual boot with windowsXP) with a wireless link to the same router that accesses the printer without a problem. The smb.conf file I am using is based on that I found in my Ubuntu OS but apparently something is different.
I have installed an HP LaserJet 2200 network printer using CUPS successfully and can print test pages and stuff from OpenOffice, Evince etc. But no luck printing from lpr. Using lpstat seems to suggest all is well:
$ lpstat -t
scheduler is running
system default destination: HP-LaserJet-2200
device for HP-LaserJet-2200: socket://192.168.10.42:9100
HP-LaserJet-2200 accepting requests since Tue 19 Oct 2010 14:01:50 NZDT
printer HP-LaserJet-2200 is idle. Enabled since Tue 19 Oct 2010 14:01:50 NZDT
Ready to print.
If I now try to print 'test.txt' using:
$ lpr test.txt
nothing happens. Try calling the printer by name:
$ lpr -P HP-LaserJet-2200 test.txt
lpr: HP-LaserJet-2200: unknown printer
I have added my user name to the lp and lpadmin groups. Trying the above as 'sudo' results in the same result. The only thing I've noticed is that when printing something from OpenOffice, in the document print status I get the message 'Processing - not connected?', although printing still works.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_NZ.UTF-8, LC_CTYPE=en_NZ.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
