Debian Configuration :: Connecting To A Windows Pc And Using Printer
Oct 17, 2010
I have finally given up trying to get to a printer on my windowsXP pc to work with my linux box and need some assistance. The printer is a hp photosmart c5500 series. My linux box is running lenny and I have installed the cups and samba applications. The linux box is networked to the win pc on a win network using a eth0 link. The link works as I have internet and e-mail connections. I have configured the smb.config file as follows:
[Code].....
I have run the tests in the samba checklist and the connection is apparently working. Pings to the windows pc,, the notebook, and the linux box all return the proper results. The "smbclient -L w.x.y.z" return shows the windows shares that includes the above named printer. When I try to connect the printer using the kde cups wizard or get into the c drive on the windows pc I get the NT_status_access_denied message. I get the same return when I try the "smbclient //username:passwd@wincomputer" I downloaded the appropriate drivers from HP and tried the lpadmin comand and instructions in the Debian mini-Howto but get the return of "lpadmin: No such file or directory" when in fact all the files exist and have correct permissions etc. I have a Ubuntu OS running on a notebook computer (dual boot with windowsXP) with a wireless link to the same router that accesses the printer without a problem. The smb.conf file I am using is based on that I found in my Ubuntu OS but apparently something is different.
View 4 Replies
ADVERTISEMENT
Aug 11, 2011
I'm using an up-to-date installation of Squeeze with the default Gnome desktop and am trying to print. My knowledge of configuring printers is very limited if it even exists. Since a friend of mine is able to print from her Ubuntu computer, my plan is to copy her. Here's how she does it. She goes under System->Administration->Printing on the desktop. Then a window pops up titled "Printing" that lists various printers that are supposed to exist. It's possible to add one by selecting Add->Printer. It asks for the root password and then a new window pops up titled "New Printer" which has a subwindow called "Select Device" In my case, the "Select Device" window has the following options to choose from:
- AppSocket/HP JetDirect
- Internet Printing Protocol (ipp)
- LPD/LPR Host or Printer
In her case, she has an extra option called "Windows Printer via Samba". This is the option that she uses. The other options don't seem to work for her. I'm assuming that I just need to install some package in order to make this option magically pop up for me. Does anyone know what package this may be? I currently have the packages smbclient, samba-common and samba-common-bin installed..........
View 1 Replies
View Related
Nov 8, 2010
When I was on Windows I used to be able to connect my laptop to a printer that was plugged into the computer downstairs via the wireless network. This network is still in place, only now I am using ubuntu I haven't got a clue as to how I connect to this network,or if it is even possible at all! how I would go about printing over the network when the other computers on the network are all windows machines.
View 3 Replies
View Related
Jan 24, 2016
I've been searching and trying to correct this problem for nigh on 12 hours. I would like to note that I know that hidden SSID are not necessarily much more secure. I have no permission to change the settings where I am. I'm running Debian Jessie. I have no way to get the server a connection other than the WiFi dongle I'm using. I have installed the correct WPA_Supplicant and Wireless Tools for my architecture/distro/version. I also have solved a sub-problem I had earlier; that the drivers for my WiFi dongle come with the kernel, but the firmware does not. That was remedied.
I can see my SSID in my iwlist scan. (iwlist scan | grep ESSID). My current /etc/network/interfaces looks like this:
Code: Select allauto wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
My current /etc/wpa_supplicant/wpa_supplicant.conf looks like this:
Code: Select allnetwork={
ssid="hundley_1"
psk=HashedPSK
scan_ssid=1
}
The original .conf was created by using wpa_passphrase "hundley_1" PASSWORD >
/etc/wpa_supplicant/wpa_supplicant.conf I know for a fact that the security key is correct. I edited the .conf produced to what it is now.
Usign ifup wlan0 and ifdown wlan0 to start and restart the connection yields an error. The gist of the error is:
NO DHCPOFFERS recieved
View 2 Replies
View Related
Mar 29, 2016
Let me introduce myself, my name is Carlos Alegría from Chile and I'm System administrator for a educational Institute. We use samba+ldap, for login accounts and file sharing but we not use samba with PDC.
Long time ago at the 2009 year, I was Installing the same system and this worked perfectly. But on our summer the hard disk of server has broken, so i was need installing all the system again. So the problem is with SAMBA, when i connect to the network resource, this is to slow, and when i try transfer files are slow.
My sistem is on Debian 8 Jessie and the Samba Version is 2:4.1.17+dfsg-2+deb
Code: Select all[global]
workgroup = LABORATORIO
netbios name = Shinigami
server string = debian
[Code].....
View 0 Replies
View Related
May 2, 2011
After today's squeeze update the nm-applet (it updated it to version 0.8.4-1) crashes when trying to connect to my vpn (pptp). I'm pretty new when it comes to this so I'm not sure what to do. I tried looking at the log file (applications--> system tools-->log file viewer) but I don't know what to make of it.
Heres the log file before it crashes:
View 1 Replies
View Related
Apr 26, 2010
I have an "HP Deskjet d1400 Series" using the "hpijs, 3.10.2 (color)" driver. When I attempt to print a test page from the CUPS web interface, it works. However, when I try to print from an application, such as Okular or Iceweasel, the only option is "Print to file". I have hpijs and hplip installed.
View 3 Replies
View Related
Dec 28, 2015
I want to browse files (including music) on my iPhone5s from my PC, which is running Debian 8.2 "Jessie" with MATE desktop environment.
I ran Code:
Select allsudo apt-get install bluetoothctl in the command line, then after I run Code: Select allbluetoothctl,
I did this:
Code: Select allpower on
devices # To get the iPhone's MAC address
scan on
agent on
discoverable on
pair IPHONE_MAC_ADDRESS_HERE
trust IPHONE_MAC_ADDRESS_HERE
connect IPHONE_MAC_ADDRESS_HERE
I can connect Debian and my iPhone just fine, but where do I go from there?
How do I browse my iPhone's files from Debian?
I've also posted this on Unix Stackexchange [URL] ....
View 2 Replies
View Related
Jan 6, 2011
I've got a strage problem with openssh-server on debian lenny. I've done setup of sshd and basically everything works fine. I can check the fingerprint of the ssh-keys on the server and it matches with the fingerprint shown on the client for the first connection. so the key is stored in the known-hosts-file on the client.
The problem occurs after a "connection reset by peer" (i guess when the connected client goes to sleep or a timeout occures)!
After such a reset, when I try to connect to the server, the banner "WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!" appears and the shown fingerprint of the server-key is totally wrong (it differs from the one on the server, BUT it is everytime when this problem occurs the same fingerprint). If I nevertheless remove the correct key from the known-host-file and accept the new key, I still can't login (permission denied).
To fix this situation temporarily I just need to restart the networking on the server. After the network-restart I get (again) the correct fingerprint of the server-key and can login without problems. Until the next connection reset.
View 1 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Oct 19, 2010
I have installed an HP LaserJet 2200 network printer using CUPS successfully and can print test pages and stuff from OpenOffice, Evince etc. But no luck printing from lpr. Using lpstat seems to suggest all is well:
$ lpstat -t
scheduler is running
system default destination: HP-LaserJet-2200
device for HP-LaserJet-2200: socket://192.168.10.42:9100
HP-LaserJet-2200 accepting requests since Tue 19 Oct 2010 14:01:50 NZDT
printer HP-LaserJet-2200 is idle. Enabled since Tue 19 Oct 2010 14:01:50 NZDT
Ready to print.
If I now try to print 'test.txt' using:
$ lpr test.txt
nothing happens. Try calling the printer by name:
$ lpr -P HP-LaserJet-2200 test.txt
lpr: HP-LaserJet-2200: unknown printer
I have added my user name to the lp and lpadmin groups. Trying the above as 'sudo' results in the same result. The only thing I've noticed is that when printing something from OpenOffice, in the document print status I get the message 'Processing - not connected?', although printing still works.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_NZ.UTF-8, LC_CTYPE=en_NZ.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
View 1 Replies
View Related
Mar 30, 2011
I am currently using Debian Testing, managing my wireless connection with NetworkManager and the Gnome nm-applet. Both have just been updated: network-manager from 0.8.1-6+squeeze1 to 0.8.2-6 and network-manager-gnome from 0.8.1-2 to 0.8.2-4.On installation of the new packages, I have no problems. However, on a reboot, I can no-longer connect to any wireless connection. I am not prompted on start-up for the password to unlock the Gnome keyring and when I left-click on the nm-applet icon and then click on a network to connect to it, nothing happens.I do not think this is a driver or NetworkManager daemon problem. If I run "nmcli dev wifi" or left-click on the applet icon, NetworkManager seems to scan for wireless networks properly and returns a list including the one I wish to connect to.
View 9 Replies
View Related
Jun 23, 2011
I am unable to connect to my printer wirelessly. I get this: Idle - "Connecting to printer..." The computer never connects. I can print a configuration report and get the ip address. If I type that in a webrowser, I get an error: unable to connect. Even if I plug the printer into the computer by a usb, I am unable to access the printer's ip address in the webrowser. I'm not sure how to proceed on getting the printer working wirelessly. It is a hp 6940 I use the HP Deskjet 6940 Series hpijs, 3.10.2rc1.9 driver. I have only recently been having printer problems. The printer has been hooked up on the same network for years. It still prints via usb.
View 5 Replies
View Related
Aug 4, 2015
I have the printer Canon i-SENSYS LBP6020. I followed the instructions from the site URL....There are no errors, but when I try to print, nothing comes out of the printer.My system is: Debian GNU/Linux 8 (jessie)Here is some debugging information:
Error log while printing from a CANON LBP6020: URL....
Troubleshooting information while printing from CANON LBP6020: URL....
View 3 Replies
View Related
May 28, 2010
I have just set up the above OS, however, installation did not find my network and therefore APT additional software & security updates could not be accessed.The network was simple to setup post installation.I have uncommented a few sources in the sources list file but obviously that does not,in itself, suffice to get accessability. I am also unable to configure my supported HP printer and I assume that can only be done with an additional package via APT.
View 6 Replies
View Related
Jan 11, 2011
I run Debian Squeeze but I have the system installed step by step from minimal installation. So I'm not sure if I have forgotten basic packages important for printing. I open system-config-printer to add a new network printer. In the list of the Network Printers after some seconds it appears the HP Color LaserJet 2600n. I chose it and hit Forward. A new window opens that says that system is searching for Drivers and finally I'm ready for printing.
[Code]..
View 1 Replies
View Related
Feb 8, 2011
I am unable to figure out how to set up a net work printer with new squeeze installation. I have used cups ver 1.3.8 on lenny and have never had any difficulty, this new version 1.4.4 I'm unable to gain any ground with.I did a purge and re-install with no luck?
View 10 Replies
View Related
Mar 29, 2011
I installed the Gnome desktop CD1 AMD 64 version of Debian Squeeze. I installed samba and python-smbc. I am missing samba printers in my system-config-printer. Anyone know why? [url]
View 2 Replies
View Related
May 29, 2011
Our Canon MX340 printer is WiFi connected using an IP address. This works well except that whenever the printer is turned off (for any reason) it chooses another IP next time it is turned on. As near as I can tell, it has two IP numbers: 192.168.1.64 and 192.168.1.65 Is it possible to enter both in the CUPS configuration so that CUPS will find the printer whichever number it is using?
View 1 Replies
View Related
Sep 21, 2015
I use a 'wifi hotspot' provided by my mobile (android) phone for internet/email and to connect to my wifi capable HP p1102w printer. Installation and use of the printer worked perfectly until I bought a new phone, again android with 'wifi hotspot' capability. The wifi connection on my new phone works fine for internet and email but it totally fails to detect my printer.
I have tried to detect and connect to the printer using system-config-printer and using the HP utility hp-setup. Both fail to detect the printer on the 'new' wifi network.
The old network connection which detects the printer as expected gives the following output:
Code: Select allpat@debian:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 6c:3b:e5:91:ec:0c
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[Code] ....
The new (problematic) network connection which fails to detect the printer gives the following output:
Code: Select allpat@debian:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 6c:3b:e5:91:ec:0c
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[Code] ....
View 4 Replies
View Related
Nov 30, 2010
reason my Debian 5 system will not stop printing blank pages. I've got the CUPS system installed, and I've gone to the control page and canceled everything. I've also turned the printer off and restarted it several times. Every time it comes back online it starts printing blank pages again. My paper does not need to be heat treated. It's fine as it is. So, how to I stop this waste of electricity and printer MTBF? What else might be sending commands to the printer besides the CUPS system?
View 2 Replies
View Related
Mar 2, 2011
I have a printer connected locally to my Debian box. It runs fine via cupsd.I am also running a Windows 2003 VMware guest which I would like to use the printer (use as a local printer, not a network printer).
VMware offers a connection via USB, so it should work. The printer I have plugged locally into the Debian host is recognised by the Windows 2003 guest, but it won't print. I get an error message saying that the printer is still connected to the host OS, and that I need to remove (or presumably disable) the host driver before the guest can use the printer.
So how can I find out which printer driver/module is being used by the Debian host to connect to this printer? And what is the best way to temporarily disable it, while my VMware guest is running?
View 3 Replies
View Related
Aug 19, 2010
how to get clients connecting to an office printer. during a migration from windows server to debian/samba.
We have:
5 windows XP machines one Windows Server 2003 machine, PDC of the old domain One debian Samba PDC (of TEST domain)/print server (with CUPS installeD) running in a virtual machine hosted by the windows server One Toshiba eStudio 3511 printer
Using the CUPS control panel, I've been able to autodetect and add the printer, and it appears as an available share in SWAT for samba. However, the driver isn't perfect. CUPS could only supply drivers for the 3510c, not the 3511.
However, clients on the TEST domain are unable to access it. Doing so gives an error about a local policy preventing a connection to the print queue. I've tried googling this error and the fix that comes up in every result about changing a point and print policy setting, does not work.
however, I've been able to work around the issue. by first logging in as local administrator, navigating to the domain server, then inputting the domain root account credentials at the prompt. That allows me to attempt to connect to printers, but with a different error
"The server for the printer does not have the correct driver installed...."
I very strongly suspect that the 3510 driver actually will work, but it's just not being shared properly. The printer driver share folder is /var/lib/samba/printers, and that directory contains only a few empty subfolders. CUPS did not place the driver there as I would expect, and that is where clients are looking for it.
The thing is, I have no idea where CUPS DID put the driver.
On the old domain, the printer uses drivers for es4511, and looking on the toshiba site, this seems to be what they provide. The Toshiba Site provides a huge variety of drivers, including several windows ones, a universal driver, and a CUPS PPD. Cups asks for an optional PPD during install and I tried supplying that. It said installed successfully, but didn't change anything.
I've tried pasting the windows drivers into /var/lib/samba/printers/W32X86 too, and likewise with other drivers from toshiba's site. but this doesn't change anything either, so I'm at a bit of a loss.
how to install/setup drivers on a samba PDC, for windows machines?
Also relevant, my smb.conf:
anyone see any possible causes of problems?
# Samba config file created using SWAT
# from UNKNOWN ()
# Date: 2010/08/19 13:03:07
[code]....
View 12 Replies
View Related
Aug 22, 2010
I recentlty did a new install and the printer icon no longer shows up in the notification area when printing....I cannot figure out what is missing or did they omit this...
View 3 Replies
View Related
Jan 3, 2011
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies
View Related
Oct 3, 2010
I was trying to get the Windows one working again. Here's what fdisk -l reads:
[Code]...
I'll change these or do some grub configurations, if anyone knows what ones can work.
View 1 Replies
View Related
Aug 26, 2010
I am unable to add my USB printer via the YaST2 Printer Configuration setup tool in openSUSE 11.3. The printer, a Dell Color Laser 1320c, was last used with openSUSE 11.2, and setup was entirely uneventful. No driver is provided by Dell, so I used the Fuji Xerox DocuPrint C525A Linux driver. The problem: To add a print queue in 11.3, a Connection must be specified (parallel, USB, network, etc). However, the configuration wizard fails to show the presence of the USB print device.
[Code]...
This printer was working just eight weeks ago under 11.2, and 11.3 is obviously able to detect its presence and identify it correctly. I feel certain the solution is simple, but I haven't found documentation that provides the answer.
View 7 Replies
View Related
Nov 15, 2009
i installed unix services for windows 3.5 on a windows xp pro box and it installed fine. I configured nfs on the debian box and exported the ip of the client computer and forwarded port 2049 correctly. I followed the instructions for setting up teh nfs client on windows. However whenever i go to tools->map network drive and type in the server-domain-name:/file-address it says it cannot connect?
View 6 Replies
View Related
Nov 23, 2009
I don't know what I'm missing here. I am trying to share a printer from my linux box to my windows workstations. I can see the printer and connect to it but when I print a test page nothing happens. The job goes to the windows queue and the disappears. I have added the PS driver for windows to the /etc/samba/drivers directory. I have also downloaded and tested the cups driver. Following is my smb.conf entries.
[global]
; netbios name = SRV
security = share
printcap name = cups
[code]....
View 2 Replies
View Related
Apr 20, 2011
is a way to get a HP Deskjet F2420 all in one printer to start working when connected to a USB port in wireless router ASUS WL-500gP V2? The hardware store guy said it will work, I believed him but cannot figure out what to do to really make it functional. Shall I return the thing...?
View 9 Replies
View Related
