I am running Ubuntu 10.10 and the window for Gnome Color Chooser that I have installed is no longer able to be resized. I can move it around when I do an alt + mouse click, but the window is too big to view all of the options it contains. The normal ability to resize the windows by their corners no longer exists on the program and the keyboard shortcut to resize the window does not work either.
View 2 RepliesIf you don't know, users are able to quickly resize windows using the "ALT+MiddleClick" key shortcut/combo. Basically, hold the ALT key, and mouse middle click and hold on a window. Move the mouse around, and it will resize the window for you.
STEPS TO REPRODUCE:
1) Open a single Window.
2) Near the bottom-right-hand corner of the window, ALT+MiddleClick and drag. It should resize. Great. It works.
What Doesn't Work:
Now, the problem arises when you have multiple windows open on the desktop, they are "layered". i.e. you might have several windows open "behind" the one currently "up front". Example:
If I try to ALT+MiddleClick the "foreground window", it rarely actually resizes THAT window, and instead jumps one of the windows from behind to the front, and resizes that one instead!
STEPS TO REPRODUCE:
1) Open 3x gnome-terminal windows and say some nautilus window. Place them overtop one another. (like the above image)
2) Try to ALT+MiddleClick the foreground window.
3) Repeat this always trying to grab the foreground window.
For me, the window manager seems to bring some window from the background to the front! Desktop Recording of the Problem: [URL]
Running:
* Ubuntu 10.10
* compiz window manager (the problem does not occur with metacity)
* ATI Radeon RV770 (HD4870) w/ open source Radeon Driver (same problem w/ fglrx driver)
* Versions: [URL]
I'm running Lucid 10.04, and I found something rather annoying that I can't find in the forums after a few searches, and would love to see fixed or hear a current solution for. When I try to manually resize a window (like FF or the terminal), I can't grab the left or right sides of it, only the top, bottom, or a side/corner that's flush against the side of the screen. The grab arrow barely appears for the most atomic fraction of time, and sometimes, even if moving slowly, doesn't appear at all. It's not a SUPER big deal, just an annoying aspect of the GUI. If I use my touchpad, I can grab a side if I move super slow, but I hate using that. I use a LogiTech M215 optical mouse. Realistically, I could just change mouse settings a bit and experiment, but that doesn't fix the problem that the "grab area" of the edges of a window is really, really tiny.
View 4 Replies View RelatedIs there a way to increase the area around a window that can change its size? When I'm using the touch-pad I'm not that stable (to much coffee) and find it really had to get the mouse to sit on the one pixel that allows you to resize a window. Or another way to resize a window?
View 6 Replies View RelatedFor some reason the printer configuration window opens so that about the bottom 1/4 of it is off the screen.
I cannot resize it or see what is down there. When I click on my printer (epson work force 610) I can see the Driver details line but I cannot see below that so I have no idea what driver I am using. How come this window opens so tall and is not re-sizable??
I must have done something to my window settings cos those three buttons in the top right corner (minimize, maximize and close) are gone. I also cannot resize the window or move it around using the mouse What did I do? And more importantly how do I fix this?
View 7 Replies View RelatedThis isn't a HUGE deal, just a little annoying. When I move the cursor to the edge of a window to resize it, i only get the resize arrow in a very small area and it takes me several tries to get it just right. Is there anyway to broaden the resize area threshold or something?
View 9 Replies View RelatedI have Ubuntu 10.10 running on a partition off of my Win7 hard drive. The thing I really like about Windows 7 is when I hit windows key+left or win+right, the current window will snap over to the left half or right half of the screen, respectively.
View 2 Replies View RelatedIs there a way to make bottom-right window resize handles disappear in Ubuntu 11.04? I run a tiling window manager and thus have no use for them, especially since they can distract and cover information. How do I make them permanently go away?
View 2 Replies View RelatedUbuntu classic screen. When window is moved beyond top or right border it is automatically enlarged. How to disable it?
View 2 Replies View RelatedI was wondering if it's possible to remove the triangular resize window button from the bottom-right corner of a particular window (or all windows, doesn't matter). I recently made it so that I have a transparent terminal (with no title bar, borders, etc.) docked onto my desktop, but the one thing I can't get rid of is the ugly-looking resize button hanging out by itself in the middle of the screen.
View 3 Replies View RelatedLike, if I drag a window to the top of the screen, somehow this is supposed to mean I want the window full screen. Screw that if I wanted it full screen I'd have clicked the button on the top of the menu. Windows 7 does this too and it just as annoying.
View 6 Replies View Relatedthe resize of the window in gnome in 11.3 was by dragging a blue screen indicating the resize area of the window now its by dragging the whole window which results in a very sluggish experience on my intel VGA here how can i change it to the old blue way ?
View 2 Replies View RelatedI can't move/resize/decorate/restore the vlc window. It takes up the entire screen (even though it is not in full screen mode) on one of my monitors. I'm using Openbox. This doesn't happen with any other type of window.[URL]..
View 4 Replies View RelatedI setup fedora 14 64 bit today itself and am loving it! But the problem i am facing is in compiz! When i enable desktop effects from System/Prefrences/Desktop Effects, everything works absolutely fine. All the effects... But when i try to resize a window, Compiz crashes and all the borders of the window disappear. The ABRT shows an error. Here is what it says
Package: compiz-0.8.6-3.fc14
Latest Crash:Sun 09 Jan 2011 05:44:37 PM
Command: compiz --ignore-desktop-hints glib gconf gnomecompat --replace
Reason: Process /usr/bin/compiz was killed by signal 11 (SIGSEGV)
Comment: None
Bug Reports:
The thing is I can resize the window vertically, but horizontally I cannot. When I put the pointer on the right or left edge of lancelot window the pointer becomes the resize pointer, but usual click and drag does not do anything on the window. Vertically it works fine.
Can I just delete Lancelot setting file to reset it? It seems I could not find where the settings are.
I used linux for a long time now, mostly ubuntu-based distros but these days I decided to try openSUSE. Must say, It is a really nice distro, with lots of new features. There is one that I never seen before but I admit it is very useful: the auto resize window feature. I use the 11.3 (KDE) (milestone 4) version. Just wanted to ask if this is a package for ths or is hard-coded into the system? And is it KDE-specific?
View 2 Replies View RelatedI'm a big fan of Gnome's alt/middle-click to resize a window. However, it doesn't work anymore for me, and I believe it stopped working (or got toggled off) when I installed the Unity desktop package (just wanted to check it out).
View 1 Replies View RelatedDoes anyone else know of a terminal emulator that scales the fonts automatically when a window is resized?
My eyesight is horrible but I want to use more terminal applications. I also use AwesomeWM for tiling, so windows resize frequently. Also on the short list are cut/paste by keyboard and good support for launching links.
No where are how enable get back minimize resize close buttons windows top tab Fedora 15 Gnome3 gconf2
There is a question about this in this thread but the thread title did not have any of the above words in it and since most "new" folks don't think to use the "posts" option, I thought I'd make a new titled post.
This seems to be a big irritant of a lot of people around the net with Gnome 3 so I'm going to confirm what other people have said about how to fix the situation.
In "add software" enter this search term:
gconf
You will see quite a few returns, you should click the following:
A process-transparent configuration system (G Conf1-2.3 yada yada)
Graphical Gconf untilities (it may be pulled with the above however).
Install it/them.
One can then type "Gconf2" in terminal and it will open but then close when the terminal is closed, or one can go to activities/applications/tweak advanced settings( the symbol will be the same as for settings in Gnome 3).
In the "Shell" button one will see "Arrangement of buttons on the title bar". Surprisingly, "All" will already be apparent. One need merely verify that it is on "all".
Close gconf.
Nothing will have happened in terms of new buttons even if one closes and opens, say FireFox.
Then reboot.
After the reboot, all three buttons will be present.
There are not a LOT of configuration items in gconf2 but this one seems to be of paramount importance to a lot of people.
One can also do it from command line, and if someone wants to post that please feel free it won't hurt my feelings.
i'm not sure for using the correct channel here but i hope someone out there can answer my little questions. 1st in older version i was able to change the settings of the terminal look as the font color, background color and so on. I was also able to define a default window size of a new terminal window. But since after upgrading to to the first release this year and a complete new installation of the current release Maverick i do not find this option anymore. Is there a way how to set up the terminal default window size?
View 9 Replies View RelatedEver since I upgraded to 10.10 (32 bit) I have serious trouble resizing windows. Seems to be accross all applications, from Chrome and FireFox to Thunderbird, Vuze and even the terminal for shell access.The problem is that the upper right corner does not seem to be active all the time. The normal way to resize a window is to hover your mouse/pointer over the upper right corner, and when it turns into an inverted L shape, grab the corner and drag it to resize the window.With 10.10, sometimes the active portion is down a 1/8" or in a 1/4" or in and down. Its rarely at the proper point of the frame of the window.I don't remember this problem at all on my 10.04 installation.
View 7 Replies View RelatedI've just installed ubuntu 10.04. as usual, there is two panels, one in top with Applications, etc. menu, and one in bottom with Opened Windows, Show Desktop, etc.
i simply want two resize the bottom panel to have two rows instead of one. but it seems it is locked and is not resizable. i found no way to unlock or resize panels in Gnome Desktop.
i think it should be very easy, but i cant find how.
I can do height adjustments but not width. My width buttons have disappeared. I have the same problem with the panel that runs up the right side. KDE 4.4.4 11.3
View 9 Replies View RelatedI have a dual boot system on my Laptop running Arch Linux and Windows XP. I have the following setup on my Laptop.
View 2 Replies View RelatedI recently got new hard drives for more space and copied all my old drives onto this one (everything mirrored, no problems)The thing is, when I first setup my Ubuntu, I only allotted like 20GB because of space.Now that I have new hard drives, I wanted to give it more space, roughly double it to 50gb.The problem is, I am unable to resize it.I have booted into the Ubuntu Live CD, and started Gparted. I see all my stuff there, including the unallocated space next to my ubuntu partition (I left it so i could fill it when I expanded the partition)
The problem is, I am unable to make it larger. I right click, click on resize/move, but when I do, it just shows that I'm at my maximum size for that partition, I can only shrink it.so my question is, how in the world can I extend that partition into the unallocated space?I've tried formatting the unallocated space to ext3 to try and merge it, no success.I tried moving my ubuntu partition all the way to the right (end of the disk) so maybe I could extend it to the left, nothing
I just installed Fedora 15 on a new laptop and I am using the Genome desktop. There are some applications that will not the allow you to resize the window. Some examples of this are Libre Calc, gnome-tweak-tool and a window in the package installer. In all these cases when you right mouse click on the top of the active window the "Resize ALT-F8" is grayed out and is not selectable.This is real problem when I'm trying to install the Perl-IDE-for-vim package because the list of dependencies is so long the confirm button is off the bottom of the screen and I cannot resize the window to get to it. There is also a similar issue with the tweak tool where some of the field are chopped off because the window is too small. As for Libre Calc I just don't like a window taking up the whole desktop.
View 4 Replies View RelatedI want to increase the size of my Linux partition (yellow and highlighted in image), which is situated in an extended partition, along with my biggest partition.
When I try to select the options from any partitioning software (EASUS, Paragon, Gparted) the option to resize is not available (or can't enlarge).
For example in the Paragon Hard Disk Manager, I can't add free space before the partition, even if I first shrink the "G:" partition, then try to enlarge the one with Linux.
Do you know what's happening here? Why am I not allowed to resize the partition?
I recently upgraded to 11.04 and I've been tweaking Unity to get the desktop just the way I like it. I've come across two minor problems though:
1. When I tweak the icon size settings in the Unity tab of CCSM, the icons do not change size; they remain at the default "48" setting regardless of what I type in.
2. When I set the Unity launcher to auto-hide (also in the Unity tab of CCSM), it stays at the default "dodge windows" setting.
Are there any workarounds to change these settings when tweaking them in CCSM's interface does not work? (Or is there some trick I don't know to get CCSM to work properly?)
The document WNIOSEK O WPIS DO KRS has a CORS logo as an embedded graphic in row 2. The document opens in OpenOffice Writer but the logo is visible at the natural size only; as soon as I enlarge/reduce the picture, either by changing the view resolution or resizing the picture, it just disappears. It happens both in Edit mode and in Print PreviewI tried to export the graphic to a separate image but it did not work. There is a command Save graphics in the context-sensitive menu; it is undocumented either in the Customisation dialogue I used that command and the resulting image was blank. Copy/paste to GIMP via the X Clipboard gives the same blank result.
View 1 Replies View Related