Ubuntu :: Recover Home Partition That Is Wiped Out Completely?
May 2, 2011
i was using 10.10 and this disaster occured when i tried to install 11.04 replacing 10.10. i have a separate home partition, while installing 11.04 i chose one weird option called "encrypt home partition"i didnt chose to format the home partition but once the installation is over, i have all my data lost in home directory.Is ther any chance that i could get the 165 gb junk data or atleast some 200 mb of important data
I have stupidly and inadvertently formatted my home partition on my other system while trying to 'downgrade' to Ubuntu 9.10. I have isolated the hard drive and am currently using Testdisk to discover the partitions on there. The scan hasn't yet finished however it appears there are two entries of each partition.
Here: Linux 0 1 1 4012 254 57 64468776 Linux 0 1 1 4012 254 57 64468776 Linux 4013 0 1 14032 254 59 160971296 Linux 4013 0 1 14032 254 59 160971296 Linux 9079 0 1 14032 254 61 79586008 [home] Linux 9079 0 1 14032 254 61 79586008 [home]
When attempting the downgrade, I was wanting to keep the home folder (and root and swap) all at the same size. I am pretty sure I fouled up by trying to revert the file system type to ext3 from ext4. Which partition out of the two 'home' ones, I should be attempting to keep? I cannot see a difference between them but this is how testdisk has reported the drive. Apart from the standard 'back up everything next time' and more fitting for me 'pack up your PC and never use it again!', does anyone have any specific advice on recovering my original home partition?
I dual boot with Ubuntu and Windows, and I just about an hour ago upgraded to 9.10 from Jaunty. After I restarted my computer two versions of Ubuntu could be booted, Windows was not on the GRUB menu. I am new to programming, and am completely clueless as to why this happened, and how I can fix this.
While setting up my laptop on a new hard drive (a bad mobo caused writes which pretty much rendered teh old hdd unusable) I was asked if I wanted to encrypt my home partition.
I've been wanting this for several years - even going as far as trying to get a copy of CheckPoint. That's waht my organization uses on all Wintendo laptops and is required.
In any case, I said "yes" and am happily using my laptop with an encrypted home partition. I'm assuming based on this - [URL] - that it is using EncryptFS as the scheme.
if I were to misplace my laptop, how easy would it be for a forensics team to retrieve my data. Let's assume I have a fairly strong passphrase, such as BisZumBitterenEnd3. [URL]
I had some major problems after the recent Ubuntu upgrade and had to boot from a live cd. I have a separate /home partition, but it was encrypted using the default install encryption in the 9.10 install cd. How can I get to my files so I can back them up?
I have tried this but it did not work: http://ubuntuforums.org/showthread.php?t=1337693
I bought a new dell studio 1555 from best buy about a year and a half ago. Got the warranty because I have 4 kids and something is bound to be dropped, spilled or smashed at some point. True to my visions, something did get dropped smashed and spilled, and pennies got stuck in the dvd slot. So I took it in when the screen stopped coming on because of a loose connection in the hinge and they did apparently fix that problem, but also were benevolent enough to wipe out my entire hard drive, operating sytem and all, totally free of charge. I guess they figured since I like accidents so much, I would just LOVE having 18 months of data and programs disappear into thin air. I know all about how I should have backed it up, and I am not whining too much over this. I will roll with the punches. But there are just a FEW things on that hard drive I will really miss. Like a few crucial spreadsheets that I was not able to save to my external drive before the screen went south. Now that windows 7, I am not planning on missing at all. In fact I am loving running my new Ubuntu 11.04 from my usb and knowing that those idiots will not be able to screw this one up next time. But I would really like to be able to recover those files if I can. Is there any way to get those back? And I also cannot figure out how to find device manager. Do I have to install to hard drive to use that? I know these are all probably total newbie questions. But hey, i got here as soon as I could. Everybody has got to start somewhere.
So, I wan't completely paying attention to the default partitioning that Red Hat Enterprise 6 does.
I was setting up a base image for VMWare and the disk was 200GB, but for some reason the default is for about 40% to go to the root partition and then the rest of it to go to /home (this doesn't include the 2GB or so in swap).
Is there an easy way to recover the space under /home and expand the root partition? Assume there are no user accounts created.
I am having issues with Grub 2 after installing Debian 7.8.0.The computer is a HP Pavilion 500-307nb. I made the original harddrive /dev/sdb and inserted a Samsung Evo 840 as /dev/sda. From the original hard drive (/dev/sdb), I wiped the windows partition, but left all other partitions unchanged (in case I would ever want to recover the desktop to its original state). I replaced the wiped windows partition with a swap partition and an LVM partition.These are my hard drive partitions:
/dev/sda (Samsung Evo 840)
Number Start End Size File system Name Flags 1 1049kB 3146kB 2097kB primary bios_grub 2 3146kB 944MB 941MB ext4 boot 3 944MB 94.4GB 93.4GB host lvm 4 94.4GB 1000GB 906GB guests lvm
[code]....
The partition /dev/sda3 has 2 logical volumes with filesystem ext4 that I mount to / and /home.The partition /dev/sda2 is mounted to /boot..When I install like this, Debian installs fine, however Grub2 is not installed correctly.Debian installs grub-pc which seems not able to boot the gpt partition. So I boot the Debian CD in rescue mode and execute:
mount /dev/sda2 /boot aptitude purge grub-pc aptitude -y install grub-efi
After rebooting, I come in the grub rescue shell, which says: error: no such device: 986f2176--4a4b-4222-83b9-8636a034b3c7.
When I then enter in the grub rescue shell: set boot=(hd0,gpt2) set prefix=(hd0,gpt2)/grub insmod normal normal
Grub and Debian start up correctly.why can Grub not start up automatically correctly? Where does the UUID 986f2176--4a4b-4222-83b9-8636a034b3c7 come from? I have reinstalled Grub several times, I have reinstall Debian several times, I have even wiped all partitions from /dev/sda and recreated a new gpt table with parted and manually set the partitions in parted. Still on each reinstallation, Grub fails because it cannot find exactly the same UUID. Since this UUID is always the same, it must be stored somewhere, but it cannot be the partitions, I have wiped them and the partition table several times.
I did though a firmware update of the Samsung Evo 840 before reinstallation, could this be a cause?Also the problem is not in grub.cfg. Grub starts correctly if I enter the commands above in the grub rescue screen and the UUID value does not appear there.
I realise that this is not a pure Linux Q, but I am hoping for tolerance and even help!After removing the partitions (/,/home) that held an older Linux installation, gparted showed the original Windows XP partition followed by the new unallocated space. On rebooting, there was a Grub rescue error (text not noted, sorry). A live install running gparted shows a totally empty disk!
The removed OS was booted via Grub2 and I imagine that it is choking when there is no secondary(?) file to be found since it was vaped. I also imagine that this is a fairly straight-forward matter, something like replacing the MBR but I am so far from Windows these days that I am unsure how to progress with rescuing the partition. The machine has no floppy - that's how I would have initially booted it way back when. Is this something that I can do either through a Linux live distro or via a Windows CD?
A bad install of linux gave me a grub that won't go away. My only hope of restoring my Windows XP and retrieving the data that was backed up (most wasn't) is to somehow access the recovery partition. That's still there. The primary partition was wiped out. This is a remanufactured system: I -don't- have a Windows CD. I -don't- have fdisk. I -don't- have any of the utility disks I'd normally use (they're 300 miles away, buried in snow and ice right now).
I do have a disk and a thumb drive with the Windows boot files on it, but grub doesn't recognize these. If I could just get rid of that grub file, I think I could boot from either the thumb drive or the cd, or even the partition with the recovery files on it, but I can't get rid of grub. I think even if I could get fdisk on either a cd or thumb drive, grub would override it. Any one know how to kill that file WITHOUT fdisk and WITHOUT the Windows CD? I have live Linux disks, Ubuntu 8.10 and 10.10 have been the most promising, but still can't do this.
This is my first time using Fedora. My previous experience is from Ubuntu. However I want to give a try for Fedora so I went ahead to install it on my new computer. Problem is that Fedora Installer (Live CD) wiped out my NTFS Partition. Causing my computer unable to recover Vista from factory DVD because it lost system partition as well. I want to know if this is my error or a bug in installer.
Original partition setup: 220 GB - Vista System Partition (NTFS) 14 GB - Recovery Partition (NTFS)
First I resized system partition under Windows Management in Vista: 170 GB - System 50 GB - Unallocated 14 GB - Recovery
Using GParted from Ubuntu 9.04 Live CD, moved recovery to the left: 170 GB - System 14 GB - Recovery 50 GB - Unallocated
Rebooted into Vista, make sure everything is fine. Then put in FC 11 Live CD, using custom layout setup in partition, intended partition layout is: 170 GB - System (NTFS) - Primary sda1 14 GB - Recovery (NTFS) - Primary sda2 200 MB - /boot (ext3) - Primary sda3 sda4 - Extended Partition 45.8 GB - / (ext4) - sda5 4 GB - swap - sda6
After I check my setup and pressed enter, it returned with unable to format /boot error: -1. Restart FC installer, it tells me that my hard drive needs to be re-initialized. I clicked no and reboot. BIOS tells me that no OS is found. Attempting to recover from factory DVD failed, telling me that system partition is gone. I want to know did I do something wrong or is this a bug in FC installer.
A friend accidentally did mkfs.vfat on my 1Tb ext. hard drive..It's now showing as 400 GB free where it was 10 GB previously and the remaining data is being shown as weird symbols and empty folders and yet it occupies more than 500GB..Any way to recover the data completely?
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
I had Ubuntu 10.04 on my laptop, and updated to 11.04. For some reason, it didn't work anymore (after 5 mins, it was freezing) so I wanted to reinstall and get to 10.04 again (I installed it using Wubi, on Windows 7, separate partition). But there was no Ubuntu in the ADD/REMOVE list. Ok so I used a partition wizard to notice that the partition with Ubuntu was recognized as "Others" (not NTFS or anything),
so I told the program to WIPE it, format it as NTFS and I was planning to reinstall Ubuntu 10.04 over there. But it seems like this was a big mistake - when I rebooted my laptop, I got the GRUB RESCUE console. I want to make it run again so I can get into my Windows 7 at least and to get to the Ubuntu 10.04.
Dummy me let root run out of space because I didn't know to use logrotate. I was able to compress the system logs but not before the damage was done me thinks; now the computer is unbootable. I booted from a LiveCD and got my old partitions mounted under /media/oldroot to try and recover files; however, I forgot that I had encrypted my home. I found [URL] and was following it; however, I seem to run into a bunch of path issues after I chroot.
The chroot command returns: bash: groups: command not found
The su command returns: -su: cut: command not found -su: getent: command not found -su: expr: command not found -su: groups: command not found
Finally, the ecryptfs-mount-private command returns: -su: ecryptfs-mount-private: command not found
I have separate partitons for /, /home, /tmp, /usr, and /usr/local and bothered to mount the first 2. (If only I had been ambitious enough to create a /var). I was running Ubuntu 10.10.
so, after long time of succesfull use of kubuntu, i encountered a 1st major disaster yesterday while using kphotoalbum. It has somehow frozen my machine in so mighty way, that it apparently corrupted a directory with majority of my pictures , which now appears to be empty .My home lies on a separate partition, its encrypted aand using btrfs and I am using kubuntu 10.10. So, could anyone give me some clues how to unencrypt my home partition, that i could obtain an image of partition or whatever else usable for photorec to check for pictures?
I run a server where multiple people can access it via SSH and have access to the same folder. Someone recently decided to stop using my server so I deleted their login account inside the User and Group GUI inside gnome. I accidentally selected delete files owned by this user. I didn't think much of it because the user didn't actually own any of the files since it was shared among all of them. Anyway, ALL the files in that shared home directory vanished, including the home directory. How can I recover this? It didn't move all the files to the root trash or my local user's trash folder. Are the permanently deleted?
I upgraded from ubuntu 9.10 to 11.04. During installation (Natty) I chosen the option to encrypt the home folder. After a day the system crashed. It was showing that disk is having health problems. If I boot from live cd then i cant access the home folder. When I tried to mount the home folder, it says "Reading directory: input/output error"
Because I used Karmic without problem I reinstalled the Karmic, then I can mount the home folder, but cant access it as it was encrypted.Now Karmic is installed. I tried to boot from Live CD of Natty and tried to mount /home folder, it says some super-block issues.How to access the files in the home folder?
computer running ubuntu 10.10 is failing to boot and I want to access the private data in the home folder in order to recover data onto another disk. How do I go about doing this? As far as I can remember its not encrypted but am still unable to access the data to backup.
I Inadvertently deleted a good partition while trying to clean up after a 10.10 update install failure that left grub broken and prevented me from using my working Linux partition. (installed 10.4 in a new partition) Used testdisk to restore the deleted partition which resulted in the entire partition table being wiped out.All partions are gone, win Xp, 2 Linux partitions, 2 Linux swap partitions.Testdisk deep search does see the partitions but will not recreate the table.
Is their anything I am doing wrong in Testdisk that it won't write the table?Nothing else has been written to the disk.I very carefully recorded the partition information - is their any way to manually enter?
recently i made a backup of my home directory in 10.10 before reinstalling 10.10. again.This time I chose to manually define the partitions (50GB Root, 25GB Swap, 325GB Home)Now i wish to migrate the old home into the newly installed home, which is on a separate partition.I have found the following documentation URL...Still, as a beginner I am not quite sure about the necessary steps to perform.As the new home is located on a separate partition is it possible to simple delete all directories there and copy all directories from old home to new home with rsync?
Do I have to install all the software that corresponds to the old home first followed by migrating home or first migrating home followed by installing the software such as thunderbird, Texlive2010 etc.Guess that migration should take place at a later stage. Otherwise my old profile files from firefox and thunderbird will be overwriten by new ones?
Been digging around and not finding anything that quite works.
Background: I had an existing 10.10 install and 10.04 on another partition. When I installed the 10.04 I told it to use the existing /home partition which is also being used by the 10.10 install. All good, both users have directories with all their data in the same /home partition.
Issue: So, as the 10.04 was 32bit (experimenting but another story) I decided I would replace with 10.04 64bit. All went well except when I did the manual partitioning I screwed up and instead of setting the existing /home partition to 'use but don't format' - which I think is what I must have done last time - I left it as 'don't use and don't format'. So, obviously, now the new 10.04 install has its /home inside /, which I don't want. I want it on the existing /home partition as it was with the previous 10.04 install.
Question(s): Is there any simple(ish) way of doing this without a reinstall? Not a major problem as I have only just installed and can do it again without losing anything but time, but I would like to figure out a way to do it without if possible.I want to essentially move the /home/user directory (rather than the /home) and make it /media/home/user inside the existing partition. Seems easy enough on the surface but becomes involved as I investigate.Ubuntu 10.04 minimal install with Xfce DE.
I just bought a new hard drive so that I could convert my XP-only machine into an XP-Ubuntu-Windows 7 triple boot machine.Since the drive is absurdly huge (1 TB) I wouldn't mind throwing ReactOS into the mixtoo.I just found out that master boot records are limited to 4 entries, meaning 4 primary partitions. I had Windows XP set up on my old drive as a boot partition, a program files partition and a media partition. Since I really didn't want to install XP from scratch, I cloned this setup on my new drive.
This leaves me one MBR partition entry for installing Windows 7, Ubuntu and ReactOS. I'd like to avoid having to install XP from scratch like the plague, partly because it's supposed to be a safety net in case things go wrong with my other OS's and because I've invested a lot of time getting it set up exactly the way I like it.Here are the options I've considered and why I don't like them:Install Windows 7 on my media partition. This would work, but I prefer to keep my media partition completely separate from any OS, so that I can reformat an OS partition without affecting my media partition at all.
Use wubi or something to install Ubuntu in the same partition as something else. Again, this is brittle.Move all my media to a logical drive on an extended partition. Create another logical drive on this extended partition for Ubuntu. The problem here is that extended partitions are rather brittle--if you nuke one, it renders the rest useless.Just put the old drive back in my computer and run XP off it. Use the new one for the other OS's. The problem here is that the old drive is slower and uses extra power, generates extra heat, etc.
I logged in to Recover Mode ("Drop to root shell prompt") this morning to do something. Naturally, I wanted access to my encrypted home folder.
The README file says to run ecryptfs-mount-private. However, that command returns an error: "ERROR: Encrypted private directory is not setup properly."
This cannot be correct, because if I log in normally, I get my home folder without any problem.
How can I access my encrypted home folder when I boot via Recover Mode?
Today I accidentally removed my home directory which contains no. of other directories having my work done in last 3 years. I used the command rm -rf * . I looked for the problem in the google got some links pertaining to my problem, but got no solution. One among these links is: [URL]. Can I get back my lost data (so many directories in my home)
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
I have finally been convinced to partition my 500GB hard drive from a two partition setup with root and swap to a three partition setup with root, swap, and home. I found a nice tutorial about how to do this, but here is my question:
A) How much space do I leave for the root partition and the home partition?
