I'm running Kubuntu 9.10. In the process of trying to install openafs, I messed w/etc/pam. d/common-auth and /etc/pam.d/common-session. So, now I can't login to my machine. Loging in using the console gives the message module is unknown.I'm unable to log in in recovery-mode: the system freezes at the recovery menu.
View 2 Replies
(Can't edit the thread title, to make clear: I'm only interested in openafs-client, not openafs server components, I simply want to mount remote afs directories),
I've upgraded to 11.3 and now openafs-client isn't working anymore code...
I've downloaded the source, did a configure, make and make install, but it's still the same error. What is the next step I can try to work out why libafs isn't found? I've confirmed that libafs.ko is build by "make" and copied somewhere (where?) by "make install", perhaps I have to configure a path somewhere?
Or is there even an ETA for an official openafs package for 11.3?
I'm setting up an Ubuntu 10.04 system; installed open-ssh. I'll call this box A. I also have an older box B with Debian. From A I can log into B via the usual way (ssh <user>@<IP>). The 1st attempt at this I was presented with the 'unknown host' warnings & elected to accept it. However, from B when I try logging into A there is no response at all -- no warnings, nothing. I have to ctrl-C back to the prompt. I can successfully ping A from B though. I CAN connect to A from a Windows box using PuTTY as an ssh client with all default settings. Once connected I can log in. Why no response from A when trying to log in from B?
View 1 Replies View RelatedI've searched lot on forums but couldn't find a related post. My problem is I want to hide my mail folders when login attempt in Evolution has failed. I dont use Remember password option so everytime I'm prompted for password.
When I give no password and escape that dialog, I can see all the mails that have been already downloaded form my gmail account. If any of you guys know already existing post, please redirect me to that one.
I've never observed this problem neither did any of my colleagues trying to SSH into the same system. If I try logging into my server using a wrong username and then press ^C to terminate or exhaust my password attempts, I am locked out for at least an hour. Is there something I can do on my end to fix this problem?
View 1 Replies View Relatedam using RHEL 5 ,i would like the system to send me an email for every time some one attempts to login to the server remotely. i have created the emailing script in perl and it works. but i want it to be triggered if someone tries to access the server. how can this be possible
View 9 Replies View RelatedI keep getting hundreds of SSH failed logins per day. Is there a way with iptables, i can say if a user connects too to port 22 over 8 times in 10 minuntes, then block them for an hour?
View 7 Replies View RelatedA few minutes ago I was using google chrome when suddenly the scroll-lock indicator on my keyboard turned on... I pressed the scroll-lock key, but nothing happened, the light remained. I opened a terminal and ran "top" to find what processes were running when I was automatically logged out. I logged back and checked the logs and found the following entries in my auth.log:
Code:
CRON[2971]: pam_unix(cron:session): session opened for user root by (uid=0)
CRON[2971]: pam_unix(cron:session): session closed for user root
[code]....
I have set up a user to login remotely to our Red Hat 5 server via SSH. A rule in our department firewall enables this user to login from a single static ip address. The ssh port on our server is 22. I am able to login to port 22 from locations within our department firewall. Our administrator says the firewall configuration is unchanged. The remote user had been successful logging in. But now the remote user gets a Connection Timed Out message, before being asked to authenticate by the server.
I regenerated security keys, but the remote user still gets the connection timed out message. (I can login locally with the new keys). I suspect either a firewall or an authentication problem--inclining a firewall problem. Am I correct? Is there a Linux command to check whether port 22 is available or blocked, prior even to authentication, for login from the user's remote location?
I am trying to setup openafs-client but I am having a problem when starting it. I am using a fresh install of OpenSUSE 11.3 and I installed the openafs, openafs-client, krb5 and kernel (default) packages from the filesystems respository of 11.3. When I start the client, either by hand or with the runlevel settings from yast I get the following errors code...
View 5 Replies View Relatedwhen I perform an apt-get update and then attempt to install the package cifs.utils it says that it cannot find the package but in Ubuntu 10.04 it does find it in 10.10. Does this package have another name or is it that the standard repositories to not have it in there list?
View 4 Replies View RelatedI'm having similar problem to someone else here in the forum (see [URL], but only with the 64 bit version of CentOS 5.5. Almost every time I try to install it, it will crash at some point in the "interactive" startup phase (but it is random). One time, I actually reached the install desktop. I did not attempt an install. I shut the machine down and the system crashed. I haven't been able to get to the install desktop since then.
I have successfully installed CentOS 5.5 32bit, however, on this same machine. In fact, I am writing this from a VM running under CentOS 5.5 32bit on this machine, and do all my work on this machine. I have since upgraded to the latest 2.6.18 kernel with PAE and latest VirtualBox; I have not experienced ANY instability at all with this machine so far. Occasionally, VirtualBox gets an error booting the client, but it has been rare and I've seen this even on older VirtualBox versions on a previous mainboard, so I am not particularly suspicious of that. It is a brand new system, only about a month old. All new parts, except for mostly unused hard drives and drive bays.
[Code]....
I have an Acer Aspire One, Model PAV70 that had Windows 7 Starter on it. I booted Ubuntu 10.10 from a USB HDD and then formatted the Acer drive with Ubuntu. I then started installing Ubuntu on the newly formatted HDD and got an error near the end of the install. It said, "apt configuration problem, an attempt to configure apt to install additional packages from the cd failed." After this happened the system locked up and I had to reboot. Now I get a black screen with a white blinking cursor. I can't get the system to recognize anything. What can I do?
CPU Type: Intel(R) Atom(TM) CPU N450
CPU Speed: 1.66GHz
System BIOS Version: V3.05(DDR2)
VGA BIOS Version: Intel V2001
I installed from a live CD when it came to selecting the partition I re-sized the partition that Ubuntu was on because it was 68 gigs I shaved off 15 gigs for SUSE. Then I selected this new 15gig partition to install SUSE on, everything went fine with the installation I was tinkering around on SUSE but of course I needed internet access, so I go to get on Ubuntu where I had my file with my network key. I restarted expecting to see the usual GRUB boot-loader screen only now with an added option for SUSE. Instead I see an entirely new layout for the GRUB boot loader and all that is listed is SUSE, Failsafe SUSE, Windows XP, and Floppy. The Windows is my XP install and it loads fine sadly it is actually what I'm using now because it is the only thing left that I have my network key saved so I can get on this forum.
Looking on SUSE I notice that the 50gig partition formerly known as Ubuntu still exists I figure no problem add the partition back on to the boot-loader and I'm good to go. Added it and when I select to load it nothing happens it starts to then reverts back to the OS list. Does anyone A) Know how to resolve this or have any ideas. B) Think I can at least copy files off that 50 gig partition to an external hard drive.
I get "403 Forbidden You don't have permission to access" after attempting an installation of phpmyadmin.
CentOS 5.4
Permissions for directory set to 755 recursively (chomd -R 755 <directory name>)
Directory is in /var/www/html/
I have other test pages in the /var/www/html/ directory that I can access ... I know this seems like a permission issue and in fact the error log states this is a permission issue, but I cannot figure what is the problem here.
Background information: I need to install WinXP on my computer to use Spectraview II software for monitor profiling. Tried it under Wine, didn't work...thought about virtualization, but Graeme Gill (creator of Argyll) said that probably wouldn't work:
Quote: The problem is that emulators often don't implement hardware details properly or at all. There's no standard way on Linux to read/write the DDC, so there is no surprise that wine doesn't emulate MSWin's API's for this. It's doubtful that any of the VM's do either. USB can be an issue too, and some instruments may not work in an emulated environment. I already had Ubuntu 10.10 installed, so thought I'd try installing WinXP after, then recovering the MBR. Lots of headache.
[Code].....
I am attempting to install debian for the first time on my pc that has no cdrom drive. I downloaded the Jessie CD image and wrote it to a 4GB stick, it didnt work. Then tried the netinstall image but face the same issue.
To write the usb stick I used unetbooting first, then tried win32diskimager and finally tried DD while stick was not mounted
Code: Select alldd if=debian.iso of=/dev/sdb BS=4MB; sync
Issue is still the same: I boot from the usb and after selecting language and keyboard it fails to detect cdrom drive (no drive at all in my pc). Same behavior using normal or expert mode.
Im also unable to manually specify the drive (it looks at /cdrom and I wanted to change it to the usb stick itself or mount usb to /cdrom but I cant find my stick in /dev)
I think the installation caused the corruption of the partition table. I removed the last 3 logical partitions and gparted correctly reported the 2 remaining distros and the swap. The problem hopefully will be solved when I reinstall those distros. I have a 160 gig HD with 3 Linux,1 swap,and a Windows partition. I attempted to install PCLINUXOS unsuccessfully. When I rebooted I had the same grub. I checked gparted and it indicated all 160 gigs as unallocated. fdisk shows the partitions. and indicates one partition as empty where I attempted to install PCLOS.
No problem in accessing any of my distros, but currently I can't make any changes to my HD. I've tried parted magic and there was no solution there. I have been unable to download the Ubuntu Rescue remix. Is there a way to restore? I haven't used fdisk or cfdisk for that purpose. I am beginning to think I would need to delete all of the partitions in the extended.
FDISK
omitting empty partition (8)
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x23213b72
Device Boot Start End Blocks Id System
/dev/sda1 * 1 5354 43005973+ 7 HPFS/NTFS
/dev/sda2 5355 15690 83022975 5 Extended
/dev/sda3 18740 19059 2560000 82 Linux swap / Solaris
/dev/sda4 19059 19458 3203072 83 Linux
/dev/sda5 5355 7908 20506624 83 Linux
/dev/sda6 7908 10840 23552000 83 Linux
/dev/sda7 10840 13772 23552000 83 Linux
If you attempt to install VLC by simply adding the VideoLAN repository to YAST, the version that's installed won't have audio.Follow the Zypper instructions on the VideoLAN website (bottom of the page)VideoLAN - VLC media player for openSUSE Be sure to specify 11.3 as described, and VLC will install fine.
View 7 Replies View RelatedJust installed Fedora 13 on a workstation and I seem to be having problemsm with Firefox displaying java.
I make sure that the Java engine was installed and that Java was turn on in the browser. I have also tried creating a link to the lubjava plugin.so and I still get the message to " Install plugin" when I attempt to view a site. I have a Fedora 12 machine that has no problems.
I tried to install OpenSuse via LiveCD this morning I got following Error Message: Kernel panic - not syncing:
[code]....
I am using the 32bit-Version of OpenSuse while running this on a 64bit Dualcore. Could that cause the issue?
Attempting to install CentOS 5.5 on my desktop box crashes spectacularly. (See [URL]The LiveCD does boot and appears to work, but also fills the screen with random, blinking characters early in the boot process.I was hoping I built a fairly ordinary box, so I'm surprised by this crash. It's an ASUS M4A78T-E AM3 790GX HDMI ATX AMD motherboard. Full specs here:[URL]
View 5 Replies View RelatedMy OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies View RelatedWhen I try and login at the main login in prompt after boot, it just returns me back to the prompt again.
If I login as root it's fine...OpenSuse: 11.3 Kde: Latest
been using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile
any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
i am having a boot problem with opensuse.i installed a theme named suse-elegant under personal settings(configure desktop)-system administration-login screen.
i had also added vbox users(i ticked vboxusers) under yast-security and users-user and group management-edit-details to make virtual box work.
i want to check that installed theme so i restarted my laptop.after the restart opensuse taking too long time to boot
note:the login theme also not working.
after the boot i restored defaults in login screen themes.it is also not working.
i don't know which cause this problem(vboxusers or login theme).i am also seeing a root user has been added in my login area.i tried opensuse failsafe also.
when I get into the login page, I can only see the background and the login box in the middle of the page just turns whole white and keeps flashing. no response for any clicks. I was force to ctrl+alt+F1 to switch to init 1 to do my work. But I still want to use my graphical desktop either KDE or Gnome is ok. I am using gnome.
View 5 Replies View RelatedI want, when I boot up, to load and log-in automatically a default user. I get a login in screen with the option to login as root, I do not want this. How do disable the option to login to X as root and just load as me/default user?
View 9 Replies View RelatedEvery account every option I try. when I login, it just cycles back to the login screen. I have attempted to do a repair install, but to no avail. it happens when I try to boot normally or if I boot into failsafe.
View 10 Replies View RelatedThe graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Packages:
OpenSuSE 11.2 + KDE 4 factory & enlightenment & qt 4.6 repos
X.Org 7.4-35.3
Kwin 4.3.98-406.6
libqt4 4.6.1+4.6.20100202-1.1
[Code]....
