Debian Installation :: Attempt To Install From USB Fails To Detect Cdrom
Jan 31, 2016
I am attempting to install debian for the first time on my pc that has no cdrom drive. I downloaded the Jessie CD image and wrote it to a 4GB stick, it didnt work. Then tried the netinstall image but face the same issue.
To write the usb stick I used unetbooting first, then tried win32diskimager and finally tried DD while stick was not mounted
Code: Select alldd if=debian.iso of=/dev/sdb BS=4MB; sync
Issue is still the same: I boot from the usb and after selecting language and keyboard it fails to detect cdrom drive (no drive at all in my pc). Same behavior using normal or expert mode.
Im also unable to manually specify the drive (it looks at /cdrom and I wanted to change it to the usb stick itself or mount usb to /cdrom but I cant find my stick in /dev)
View 14 Replies
ADVERTISEMENT
Jan 29, 2010
using comapq proliant 8500
tested
8.04LTS
9.10
none of them coud find cd rom (then hove the F it can even get till detection ???)
not in /dev/cdrom only cdrom i coud filnd using # ls / was ls /cdrom and it just not working too so what can i do ??
View 3 Replies
View Related
Oct 16, 2010
I need to force 80 pin cable detect on my cdrom. According to the kernel-parameters.txt file you can do this by using libata.force=(port).(device) 80c Here is the actual explanation from the kernel file: libata.force=[LIBATA] Force configurations. The format is comma separated list of "[ID:]VAL" where ID is PORT[.DEVICE]. PORT and DEVICE are decimal numbers matching port, link or device. Basically, it matches the ATA ID string printed on console by libata. If the whole ID part is omitted, the last PORT and DEVICE values are used. If ID hasn't been specified yet, the configuration applies to all ports, links and devices.
My question is where do you find the proper port.device numbers? I'm guessing it's lspci but I'd rather be sure before I do something silly.. An actual working line for a cdrw as master on the first ide channel would be excellent. BTW my cdrw is detected as sr0 so the normal "ide" boot params won't work....
View 9 Replies
View Related
Jun 8, 2011
I have just had my Ubuntu 10.04.2 Luci installed under my Windows OS. Things seem to be fine until I find out next that my copy of Ubuntu does not detect the presence of the cdROM which installed the software itself on my desktop machine.
I have tried searching high and low for clue in this forum, tried all the recommended tricks to find out at last that there is no cdROM listed under my DISK UTILITY and when I input the following comman,
sudo lshw -class disk -class storage I only happened to see my hard drive and some USD drives being listed.
Also, Brasero Disc Burner does not detect the presence of a cd/ DVD rom devices.
View 2 Replies
View Related
Apr 20, 2011
Having trouble installing 'Squeeze' 6.0.1a-amd64-netinst on a new AMD64 system.The installer boots and runs fine until it gets to hard disk detection. Then it hangs for about 20 minutes showing a blue screen, during which time the HDD-activity light flickers every 5 seconds. Eventually it says it can't detect a hard disk, and displays a (longish) list of possible drivers; no idea which, if any, would suit.Anyone else installed (successfully or otherwise) on this combo?
View 3 Replies
View Related
Jun 26, 2015
“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options:
1. Configure iSCSI volumes
2. Undo changes to partitions
3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
View 14 Replies
View Related
Nov 4, 2010
I'm running F12 and Package Updater has been telling me to update Thunderbird for two days but fails on every attempt. I tried to go the yum route today with
yum remove thunderbird
yum install thunderbird
And I get this error:
Error: Package: thunderbird-3.0.10-1.fc12.i686 (updates)
Requires: nss >= 3.12.8
Installed: nss-3.12.7-6.fc12.i686 (@updates)
nss = 3.12.7-6.fc12
Available: nss-3.12.4-14.fc12.i686 (fedora)
nss = 3.12.4-14.fc12
Is there any way I can update nss such that Thunderbird will have access to the correct version or is this something that is in process for the repository?
View 2 Replies
View Related
Jun 24, 2010
The nm-applet starts automatically as it should, and also tries to connect to the local, wireless LAN, but always fails its first attempt. If I click the icon and ask nm-applet to connect again, it always succeeds.
The server, running the wireless LAN, never sees the first attempt to connect, so no wonder this attempt fails. But it would be nice to make it succeed!
View 2 Replies
View Related
Jan 10, 2011
I'm having an issue with a BIND server. After a restart, (or randomly, I assume whenever a cache expires,) when I try to resolve any domain I get a "Host yahoo.com not found: 2(SERVFAIL)" Eventually it starts working and works fine till the cache expires again;
[Code]...
View 1 Replies
View Related
Mar 1, 2016
I'm trying to install Debian Jessie, but the installation keeps failing when installing the ca-certificates package and then asks for a media change to the disk that is already in the drive, and keeps asking even though it's already in the drive.
View 0 Replies
View Related
Feb 11, 2011
So I am helping a friend (computer n00b) to install Debian Squeeze over the telephone, since his Vista had crashed, and after we set up the partitions like so:9 GB /1GB swap 150 GB /homeIt "hangs" for a while, i.e. nothing happens, and then it says that it "failed to partition disks". It did not give any error codes, and I did not see the message first hand, since I was doing it over the phone, but I was thinking that there is something wrong with the hard drive (causing Vista to crash perhaps?) so could this be circumvented by just using the first (or last) 10-15 GB of the disk?
View 7 Replies
View Related
Aug 3, 2011
I am dual-booting 11.04 alongside windows 7. I shrunk my w7 partition, and would like to extend my ubuntu partition to fill up the remaining space. When I boot from GParted live cd, and attempt to 'move/resize' my ubuntu partition, it simply fails. It doesn't really give an error message either, simply 'failed to move/resize [partition name]'
View 4 Replies
View Related
Jan 1, 2011
Well I bought this book "Debian GNU/Linux 3.1 and it came with Debian installer. Thought this was too good to be true! Well, during the install I get a message that "cdrom not detecting install components". I ran the the diagnostic utility that was included in the disc and it did not report any issues.
View 3 Replies
View Related
Apr 27, 2015
When I try to install Debian 8 on my laptop I get this rather odd error. The install fails every time. I've managed to get as far as choosing which Desktop Environment I want and the shortly after it shuts off. It shows 4 messages
Code: Select allSystem is going down!
Sending Termsignal
Sending Killsignal
Requesting Machine Poweroff
The machine I'm trying to install on is a Gateway NV53, 4gb of RAM, AMD Athlon II x64.
At first I thought it might be my disc so I burnt another DVD using the 4.3GB DVD image I had downloaded. I checked the disc and it verified with the image and so I tried again with the same results as above. Any clue what might be causing this? I'm sure it isn't my hardware, Arch has been running fine for almost 6 months and never seemed to care.
View 3 Replies
View Related
Oct 9, 2015
I've run into a situation where when performing a pxe/preseed install the system boots up into the install without issue, getting a dhcp address, then the installer begins to configure the network and it gets to where it request a dhcp address and it instantly fails the install stating that we are either not using dhcp or it's slow.
I've added d-i netcfg/dhcp_timeout string 600 to the preseed file but it doesn't seem to be honoured here since it doesn't wait 600 seconds before failing. I have 2 other identical systems that install using the same preseed file but the installer completes as expected. This system has no issues installing centos just debian fails. I did try, once the install failed, to switch to the console and run udhcpc and the server received the address reserved for it.
Is there a method to force debian installer to wait a bit longer for the dhcp server besides what I've already done?
View 0 Replies
View Related
Sep 14, 2010
I'm trying to install Debian-testing to an ASUS 1018P netbook on which I have successfully installed Arch in the past. I'm installing from an external DVD drive and when I get to the point of network configuration it fails. I'm connected via Ethernet via eth0 which is recognized. Here is the last part of the ouput:
kernel: [ 1807.932848] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
kernel: [ 1807.933453] ADDRCONF(NETDEV_UP): eth0: link is not ready
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 8
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 15
code....
View 14 Replies
View Related
Oct 9, 2014
VirtualBox 4.3.14
Windows 7
Debian 7.6
I'm trying to create a new VM with Debian 7.6. I downloaded the 3 install iso discs and tried to install. When I begin the installation it seems to take control of the CDROM and I am no longer able to eject it by either pressing the eject button or trying to eject through Windows. The installation goes fine until it asks if I have any other discs to install (which I do ... I have 2 more). At this point I say "Yes" but I cannot get the CDROM to open up at all since it doesn't automatically eject for another disc and as I mentioned before ... I can't do it manually or in Windows.
- I cannot do an installation over the internet because this is a government computer which is requires to be hooked to a government network. There are certain certificates required to access the network which are not available to my newly made (or in the process of making) Linux system but rather only to my host Windows system.
- I cannot use a newer version of VirtualBox because that opens up a whole new set of issues dealing with WinVerifyTrust getting CERT_E_REVOCATION_FAILURE most likely due to our symantec security software.
So my Storage Settings in VirtualBox are as follows for my CDROM drive:
- Controller: IDE Controller
- Type: PIIX4
- "Use Host I/O Cache" is checked
- Host Drive D:
- CD/DVD Drive: IDE Secondary Master
- "Passthrough" is checked
I cannot install the Debian 7.6 OS because I cannot eject each disc and put in the next disc. The only way I can eject the disc is if I reboot my entire system (host windows system) which obviously leaves me at an unfinished point in my install and therefore I have to restart the install and end up right where I was 30 minutes earlier.
View 6 Replies
View Related
Nov 18, 2014
I want to try Debian on my Asus Eee netbook and I'm trying to follow the instructions in URL... But just copying the ISO file to the USB drive then trying to boot from it doesn't seem to work. I just get "Missing operating system".
The Eee can use an external optical drive as well but that failed also. I'm sure I need to do more to prepare the USB drive or CD? Can I prepare the USB Drive or CD on my Windows system, and make it boot on the netbook (which has another Linux distro on it now)?
View 5 Replies
View Related
Dec 18, 2010
Background information: I need to install WinXP on my computer to use Spectraview II software for monitor profiling. Tried it under Wine, didn't work...thought about virtualization, but Graeme Gill (creator of Argyll) said that probably wouldn't work:
Quote: The problem is that emulators often don't implement hardware details properly or at all. There's no standard way on Linux to read/write the DDC, so there is no surprise that wine doesn't emulate MSWin's API's for this. It's doubtful that any of the VM's do either. USB can be an issue too, and some instruments may not work in an emulated environment. I already had Ubuntu 10.10 installed, so thought I'd try installing WinXP after, then recovering the MBR. Lots of headache.
[Code].....
View 2 Replies
View Related
Jul 30, 2010
I managed to boot from hard disk, everything works ok. But Gparted has a bug, it works in Live Hard Disk, but not when I click the install icon because it can't umount /cdrom. But I solved that by formatting ext4 and swap area from gnome-panel Live Hard Disk and only put mount point / after click on install.But problem stroked back: install is not possible because it wants to umount itself before installing, wich cannot be possible. I'm installing it in a new place /dev/sda5. Live Hard Disk is booting from /dev/sda3.
ubuntu@ubuntu:~$ df -h | grep sda
/dev/sda3 2.0G 726M 1.3G 36% /cdrom
/dev/sda1 43G 17G 26G 41% /media/Windows
[code]....
View 1 Replies
View Related
Jul 11, 2010
I downloaded and burned the Fedora-13-x86_64-dvd iso to install on my shiny new box (MSI NF980-G65 MB, AMD Phenom II x4 945 CPU, 8GB Corsair DDR3 memory, generic ATAPI DVD drive, 2 500GB SATA drives, 2 1.5TB SATA drives). I boot from the DVD and and take the default install/upgrade option on the menu. I've tried with the default boot options and with about a dozen different options, all give the the same thing.
Looking console 3, shows the following:
ERROR loader: removing ddmode.conf failed
ERROR loader: got to setupCdrom without a CD device
It can't find the CD/DVD drive that it booted from. The install on console 1 is prompting for a driver to load. Do I need to download a driver for a generic ATAPI/IDE CD/DVD drive?
View 10 Replies
View Related
Jun 6, 2010
I downloaded the Ubuntu Server 10.04 64bit ISO and the universal USB installer, created a USB install disk and booted from it. I started the installation and right after keyboard setup I got an error saying Unable to read from CD-ROM, retry/abort. Looking at the alt-f4 log it was unable to find a file, fs-secondary.udeb I hit alt-f2 and cd'd to /cdrom/pool/main/l/linux (I think, this is all from memory) and found that file, almost. The file there was fs-secondaryblahblahblah.ude, no b on the end. I tried renaming it but the filesystem was mounted read-only.
So, cd back to /
Type mount and hit enter.
Take note of the cdrom entry, at the beginning of that line it will say /dev/? Mine was like /dev/svd0 or something like that. Remember whatever that is.
Then type umount /cdrom
Then type mount -t vfat /dev/????? (whatever your device was from earlier) /cdrom
That will mount the cdrom rw so you can rename the file to .udeb
Then press alt-F1 and press enter to retry and the installation will continue like normal.
View 4 Replies
View Related
Sep 12, 2010
I accidentally deleted my mahjongg game from ubuntu 10.04.Now when iam trying to install it from software center or synaptic, half way through it's asking for ubuntu cd.Eventhough i insert the original ubuntu 10.04 cd,it's not taking it.it keeps asking for the cd.It is same whenever i try to install any more game from synaptic or software center.
View 2 Replies
View Related
May 7, 2011
I have had a dual boot on my system since first trying Ubuntu a few months ago.I had a few problems when i upgraded to 11.04 (mainly due to the new desktop Unity), but after some great help here, we had the old desktop running again.I have Windows running on my spare Computer in case i should need it for any reason, though can not think of one lol Now i am used to Ubuntu (from the using side, get lost in terminal etc so here i come if i need help) i decided i would totally commit my main computer to Ubuntu.I downloaded the latest iso from the Ubuntu site, and burnt it to CD, inserted in my main computer & rebooted. It goes past the first purple ubuntu page (hit a key to choose language & also get a selection Menu) then goes to black screen and i get:
BusyBox v1.17.1 (ubuntu 1:1.17.1-10ubuntu1) built-in shell (ash)Enter 'help' for a list of built-in commands.(initramfs) mount: mounting /dev/loop0 on //silesystem.squashfs failed: Input/output errorCan not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs(hope i typed that i correctly)I have burnt the iso image numerous times, using different disks, speed (from x4 - x52) and burning programs
View 2 Replies
View Related
May 29, 2011
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
View 6 Replies
View Related
Jan 12, 2010
Code...
To find the appropriate firmware without knowing the make or brand of your wireless chip, you can use the command:
#fw-detect
But apparently debian package do not offer this useful tool, well, certainly for sidux exclusively.
Is there a package of fw-detect eventually?
View 5 Replies
View Related
Jul 20, 2015
In the past i used OpenSUSE for a few months, in OpenSUSE all updates related to security labeled as "Security Update" like updates related to Firefox, unlike OpenSUSE in the Debian i did can't find a way to detect security updates.
View 5 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
May 14, 2011
I'm having an issue with the installation. I've downloaded the live ISO and put it on my USB. Everything appeared fine except for the wireless because it requires non-free firmware. The installation tells me that I can insert a USB device with the firmware on it, so I ran to a different computer to download it off the manufacturer's website and put it on the root of another USB.
However, when the installation tries to detect the firmware on the USB, it fails.
The installation is claiming to look for rt2561.bin. I have placed this in the root of the USB as well as the .zip file it came in and a .bz2 file for manual installation of the firmware. Unfortunately, I cannot install the firmware manually either because the system is missing various commands (make, etc.). I am assuming these would be installed automatically with an internet connection.
View 3 Replies
View Related
May 21, 2011
Using xsel I pass a selection into a variable. I then check that the variable includes an embedded newline to be sure that the selection returned by xsel is complete. If the selection content preceding the newline is just a single word, the check fails to detect the newline, thus
Code:
g fnm=`xsel`
g cat <<< "$fnm"
Whatis
apropos sear
[code]....
View 14 Replies
View Related
